Synthesis and reactions of fluorous carbobenzyloxy (FCbz) derivatives of alpha-amino acids

Fluorous carbobenzyloxy ((F)Cbz) reagents RfCH(2)CH(2)C(6)H(4)CH(2)OC(O)OSu (where Su is succinimidoyl and Rf is C(6)F(13) and C(8)F(17)) have been used to make (F)Cbz derivatives of 18 of the 20 natural amino acids. The potential utility of this new family of reagents in both standard fluorous synthesis with spe separation and fluorous quasiracemic synthesis is illustrated with representative reactions of the (F)Cbz-Phe derivatives.     

Second generation fluorous DEAD reagents have expanded scope in the Mitsunobu reaction and retain convenient separation features

First generation fluorous DEAD reagent bis(perfluorohexylethyl)azo dicarboxylate (C(6)F(13)(CH(2))(2)O(2)CN=NCO(2)(CH(2))(2)C(6)F(13), F-DEAD-1) has been shown to underperform relative to diisopropylazodicarboxylate in difficult Mitsunobu reactions involving hindered alcohols or less acidic pronucleophiles (phenols). Two new second generation fluorous reagents bearing propylene spacers instead of the ethylene spacers show expanded reaction scope while retaining the easy fluorous separation features. Byproducts from "half fluorous" reagent perfluorooctylpropyl tert-butyl azo dicarboxylate (C(8)F(17)(CH(2))(3)O(2)CN=NCO2(t)Bu, F-DEAD-2) can be removed by fluorous flash chromatography, and byproducts from bis(perfluorohexylpropyl)azo dicarboxylate (C(6)F(13)(CH(2))(3)O(2)CN=NCO(2)(CH(2))(3)C(6)F(13), F-DEAD-3) can be removed by fluorous solid-phase extraction. The new reagents promise to provide general and complementary solutions for separation problems in Mitsunobu reactions without restricting reaction scope.     

Polyfluorinated quaternary ammonium salts of polyoxometalate anions: fluorous biphasic oxidation catalysis with and without fluorous solvents

[reaction: see text] Polyfluorinated quaternary ammonium cations, [CF(3)(CF(2))(7)(CH(2))(3)](3)CH(3)N(+) (R(F)N(+)), were synthesized and used as countercations for the [WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)](12)(-) (M = Mn(II), Zn(II)) polyoxometalate. The (R(F)N(+))(12)[WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)] compounds were fluorous biphasic catalysts for alcohol and alkenol oxidation, and alkene epoxidation with aqueous hydrogen peroxide. Reaction protocols with or without a fluorous solvent were tested. The catalytic activity and selectivity was affected by both the hydrophobicity of the solvent and the substrate.     

1H,1H,2H,2H-perfluoroalkyl-functionalization of Ni(II), Pd(II), and Pt(II) mono- and diphosphine complexes: minimizing the electronic consequences for the metal center

A series of fluorous derivatives of group 10 complexes MCl(2)(dppe) and [M(dppe)(2)](BF(4))(2) (M = Ni, Pd or Pt; dppe = 1,2-bis(diphenylphosphino)ethane) and cis-PtCl(2)(PPh(3))(2) was synthesized. The influence of para-(1H,1H,2H,2H-perfluoroalkyl)dimethylsilyl-functionalization of the phosphine phenyl groups of these complexes, as studied by NMR spectroscopy, cyclovoltammetry (CV), XPS analyses, as well as DFT calculations, points to a weak steric and no significant inductive electronic effect. The steric effect is most pronounced for M = Ni and leads in the case of NiCl(2)(1c) (3c) and [Ni(1c)(2)](BF(4))(2) (7c) (1c = [CH(2)P[C(6)H(4)(SiMe(2)CH(2)CH(2)C(6)F(13))-4](2)](2)) to a tetrahedral distortion from the expected square planar geometry. The solubility behavior of NiCl(2)[CH(2)P[C(6)H(4)(SiMe(3-b)(CH(2)CH(2)C(x)F(2x+1)b)-4](2)](2) (3: b = 1-3; x = 6, 8) in THF, toluene, and c-C(6)F(11)CF(3) was found to follow the same trends as those observed for the free fluorous ligands 1. A similar correlation between the partition coefficient (P) of complexes 3 and free 1 was observed in fluorous biphasic solvent systems, with a maximum value obtained for 3f (b = 3, x = 6, P = 23 in favor of the fluorous phase).     

Synthesis and properties of a novel family of fluorous triphenylphosphine derivatives

A novel approach to the preparation of perfluorotail-functionalized triarylphosphines using a p-silyl substituent as the branching point has been developed. This approach enabled the attachment of between three and nine perfluorotails per phosphorus atom, resulting in the production of highly fluorous tris[p-(1H,1H,2H, 2H-perfluoroalkylsilyl)aryl]phosphines, P[C(6)H(4)-p-SiMe(3)(-)(n)()(CH(2)CH(2)C(x)()F(2)(x)()(+1))(n)()](3) (n = 1, 2, 3; x = 6, 8), containing between 50 and 67 wt % fluorine. (31)P NMR studies indicate that the phosphorus atoms, and consequently the sigma-donor and pi-acceptor properties of these phosphines, are not influenced by the electron-withdrawing perfluoroalkyltails. The fluorous triarylphosphines are readily soluble in fluorous solvents and display fluorous phase preference in several fluorous biphasic systems. The phase partitioning of these fluorous ligands, as well as their donor properties, is discussed in relation to their potential for fluorous biphasic catalyst separation.     

Separation of "light fluorous" reagents and catalysts by fluorous solid-phase extraction: synthesis and study of a family of triarylphosphines bearing linear and branched fluorous tags

Practical syntheses of new triarylphosphines bearing both linear and branched fluorous tags (Rf) are reported. The phosphines have one, two, or all three aryl rings bearing fluorous tags: (Ph)(3)(-)(n)()P(C(6)H(4)(CH(2))(m)()Rf)(n)(). Fluorous-organic partition coefficients have been measured and the retention properties of both the phosphines and the derived phosphine oxides on fluorous reverse phase silica have been studied. While applications relying on liquid-liquid extractive separations of these phosphines may be limited to those bearing three fluorous chains, the technique of solid phase extraction should be broadly applicable to phosphines, phosphine oxides, and derived metal complexes. A parallel platinum-catalyzed allylation of aldehydes with fluorous allyl stannanes illustrates the usefulness of the new fluorous ligands in small-scale synthesis.     

Fluorocarbon soluble copper(II) carboxylate complexes with nonfluoroponytailed nitrogen ligands as precatalysts for the oxidation of alkenols and alcohols under fluorous biphasic or thermomorphic modes: structural and mechanistic aspects

This fluorous biphasic catalysis (FBC) contribution was focused on the synthesis and characterization of new fluorous soluble R(f)-Cu(II) carboxylate complexes containing nonfluoroponytailed ligands and defines their role as precatalysts for the FBC oxidation of alkenols and alcohols in the presence of 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)/O(2). In this FBC approach, we have utilized the phase-switching technique of Vincent et al. (J. Am. Chem. Soc. 2002, 124, 12942) to solubilize the nonfluoroponytailed ligands, N-1,4,7-Me(3)TACN, 2, and N-1,4,7-pentamethyldiethylenetriamine (PMDETA), 3, by reaction with a fluorous solvent-soluble copper (II) dimeric complex, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)](2), 1. Moreover, the reaction of nonfluoroponytailed ligands 2 and 3 with 1 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)(2)], 4, and [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2) (3)], 5, respectively. The known Cu(II) complex, 1, was further characterized by electron paramagnetic resonance (EPR) spectroscopy confirming its dimeric structure, while 4 and 5 were characterized by elemental analysis, IR, diffuse reflectance UV-vis, and EPR spectroscopy. Furthermore, 1, 4, and 5 were evaluated as precatalysts for alkenol and alcohol oxidation. The oxidation reactions of alkenols and alcohols in the presence of TEMPO/O(2) proceeded under FBC conditions for 1, 4, and 5, but 1-octanol was unreactive under single-phase FBC conditions at 90 degrees C with TEMPO/O(2). The thermomorphic property of 5, soluble in chlorobenzene/toluene at 90 degrees C but insoluble at room temperature, was also evaluated in the selective oxidation of p-nitrobenzyl alcohol to p-nitrobenzaldehyde. Plausible mechanisms concerning these FBC/thermomorphic oxidation reactions will be discussed.     

Aggregation properties of cationic gemini surfactants with partially fluorinated spacers in aqueous solution

The aggregation properties of cationic gemini surfactants alkanediyl-alpha,omega-bis(dodecyldimethylammonium bromide), [C(12)H(25)(CH(3))(2)N(CH(2))(m)(CF(2))(n)(CH(2))(m))N(CH(3))(2)C(12)H(25)]Br(2) [where 2m + n = 12 and n = 0, 4, and 6; designated as 12-12-12, 12-12(C(4)(F))-12, and 12-12(C(6)(F))-12, respectively] have been studied by microcalorimetry, time-resolved fluorescence quenching, and electrical conductivity. Compared with a fully hydrocarbon spacer of 12-12-12, the fluorinated spacer with a lower ratio of CF(2) to CH(2) in 12-12(C(4)(F))-12 tends to disfavor the aggregation, leading to larger critical micelle concentration (cmc), lower micelle aggregation number (N), and less negative Gibbs free energy of micellization (DeltaG(mic)). However, the fluorinated spacer with a higher ratio of CF(2) to CH(2) in 12-12(C(6)(F))-12 may prompt the aggregation, resulting in lower cmc, higher N, and more negative DeltaG(mic). It is also noted that enthalpy change of micellization (DeltaH(mic)) for 12-12(C(4)(F))-12 is the most exothermic, but the values of DeltaH(mic) for 12-12-12 and 12-12(C(6)(F))-12 are almost the same. These results are rationalized in terms of competition among the enhanced hydrophobicity and the rigidity of the fluorinated spacer, and the variation of immiscibility of the fluorinated spacer with the hydrocarbon side chains.     

sp carbon chains surrounded by sp(3) carbon double helices: directed syntheses of wirelike Pt(CC)(n)Pt moieties that are spanned by two P(CH(2))(m)P linkages via alkene metathesis

Reactions of trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2PtCl (1; m' = a, 6; b, 7; c, 8; d, 9; e, 10) and H(CC)2H (HNEt2, cat. CuI) give trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2Pt(CC)2H (3a-e, 80-95%). Oxidative homocouplings of 3a-d under Hay conditions (O2, cat. CuCl/TMEDA, acetone) yield trans,trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2Pt(CC)4Pt(Ph2P(CH2)m'CH=CH2)2(C6F5) (4a-d, 64-84%). Treatment of 3c-e with excess HCCSiEt3 under Hay conditions gives trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2Pt(CC)3SiEt3 (56-73%). Homocouplings (n-Bu4N+ F-, Me3SiCl, Hay conditions) afford trans,trans-(C6F5)(Ph2P(CH2)m'CH=CH2)2Pt(CC)6Pt(Ph2P(CH2)m'CH=CH2)2(C6F5) (13c-e, 59-64%). Reactions of 4a-d and 13c-e with Grubbs' catalyst, followed by hydrogenation, give mixtures of trans,trans-(C6F5)(Ph2P(CH2)mPPh2)Pt(CC)nPt(Ph2P(CH2)mPPh2)(C6F5) with termini-spanning diphosphines and trans,trans-(C6F5)(Ph2P(CH2)mPPh2)Pt(CC)nPt(Ph2P(CH2)mPPh2)(C6F5) with trans-spanning diphosphines (m = 2m' + 2; n = 4, 6). The latter (n = 4) are independently synthesized by similar metatheses/hydrogenations of 1a-d to give trans-(C6F5)(Ph2P(CH2)mPPh2)PtCl (49-59%), followed by analogous introductions of (CC)4 chains (66-77%). Crystal structures of complexes with termini-spanning diphosphines show sp3 chains with both double-helical (m/n = 20/4) and nonhelical (m/n = 20/6) conformations, and highly shielded sp chains. The sp3 chains of complexes with trans-spanning diphosphines exhibit double half-clamshell conformations. The dynamic properties of both classes of molecules are analyzed in detail.     

Light, medium, and heavy fluorous triarylphosphines exhibit comparable reactivities to triphenylphosphine in typical reactions of triarylphosphines

[reaction: see text] The relative reactivities of triphenylphosphine (PPh(3)) and three fluorous triarylphosphines [(p-R(F)(CH(2))(2)C(6)H(4))(n)PPh(3)(-)(n), where n = 1-3] have been compared in internal competition experiments. Product ratios were determined by (31)P NMR spectroscopy. The four phosphines have about the same reactivities in oxidation, alkylation, and Staudinger reactions and give comparable yields in a preparative Mitsunobu reaction. Previously observed rate and yield differences in Staudinger reactions of the fluorous phosphines are attributed to solubility effects, not reactivity differences. A light fluorous phosphine [(p-C(8)F(17)(CH(2))(2)C(6)H(4))PPh(2)] outperforms a commercially available resin-bound phosphine in a competitive benzylation experiment by a factor of about 4.     

Chiral fluorous dialkoxy-diamino zirconium complexes: synthesis and use in stereospecific polymerization of 1-hexene

New catalysts for the isospecific polymerization of 1-hexene based on cationic zirconium complexes incorporating the tetradentate fluorous dialkoxy-diamino ligands [OC(CF(3))(2)CH(2)N(Me)(CH(2))(2)N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(2)NO)(2-)] and [OC(CF(3))(2)CH(2)N(Me)(1R,2R-C(6)H(10))N(Me)CH(2)C(CF(3))(2)O](2-) [(ON(Cy)NO)(2-)] have been developed. The chiral fluorous diamino-diol [(ON(Cy)NO)H(2), 2] was prepared by ring-opening of the fluorinated oxirane (CF(3))(2)COCH(2) with (R,R)-N,N'-dimethyl-1,2-cyclohexanediamine. Proligand 2 reacts cleanly with [Zr(CH(2)Ph)(4)] and [Ti(OiPr)(4)] precursors to give the corresponding dialkoxy complexes [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3) and [Ti(OiPr)(2)(ON(Cy)NO)] (4), respectively. An X-ray diffraction study revealed that 3 crystallizes as a 1:1 mixture of two diastereomers (Lambda-3 and Delta-3), both of which adopt a distorted octahedral structure with trans-O, cis-N, and cis-CH(2)Ph ligands. The two diastereomers Lambda-3 and Delta-3 adopt a C(2)-symmetric structure in toluene solution, as established by NMR spectroscopy. Cationic complexes [Zr(CH(2)Ph)(ON(2)NO)(THF)(n)](+) (n=0, anion=[B(C(6)F(5))(4)](-), 5; n=1, anion=[PhCH(2)B(C(6)F(5))(3)](-), 6) and [Zr(CH(2)Ph)(ON(Cy)NO)(THF)](+)[PhCH(2)B(C(6)F(5))(3)](-) (7) were generated from the neutral parent precursors [Zr(CH(2)Ph)(2)(ON(2)NO)] (H) and [Zr(CH(2)Ph)(2)(ON(Cy)NO)] (3), and their possible structures were determined on the basis of (1)H, (19)F, and (13)C NMR spectroscopy and DFT methods. The neutral zirconium complexes H and 3 (Lambda-3/Delta-3 mixture), when activated with B(C(6)F(5))(3) or [Ph(3)C](+)[B(C(6)F(5))(4)](-), catalyze the polymerization of 1-hexene with overall activities of up to 4500 kg PH mol Zr(-1) h(-1), to yield isotactic-enriched (up to 74 % mmmm) polymers with low-to-moderate molecular weights (M(w)=4800-47 200) and monodisperse molecular-weight distributions (M(w)/M(n)=1.17-1.79).     

Parallel synthesis and study of fluorous biphasic partition coefficients of 1H,1H,2H,2H-perfluoroalkylsilyl derivatives of triphenylphosphine: a statistical approach

A library of fluorous, (1H,1H,2H,2H-perfluoroalkyl)silyl-substituted derivatives of triphenylphosphine, Ph(3-a)P[C(6)H(5-y)[SiMe(3-b)(CH(2)CH(2)C(x)F(2x+1))(b)](y)-pos](a) [a = 1-3; b = 1-3; x = 4, 6, 8, or 10; pos = 3, 4 (y = 1) or 3,5 (y = 2)], was prepared using parallel synthetic techniques. Upon variation of these four parameters, a total of 108 different fluorous phosphines can be synthesized. Using factorial design, 37 phosphines were selected and their partition coefficients in the typical fluorous biphasic solvent system PFMCH/toluene (PFMCH = perfluoromethylcyclohexane) determined. By fitting of the partition coefficient data to linear functions of the parameters a, b, and x, the partition coefficients of the remaining 71 fluorous phosphines, which were not prepared, could be predicted. Using this approach, some unexpected trends in the dependence of the partition coefficient on variations of the four parameters became clear, resulting in a better understanding of the optimum fluorous substitution pattern for obtaining the highest partition coefficient (P). In this way, the partition coefficient was increased by 2 orders of magnitude, i.e., from the initial value P = 7.8 for 1(3, 2, 6, C4) to P > 238 for 1(2, 3, 6, C3C5). Para- and 3,5-substituted phosphines showed irregular behavior in the sense that elongation or increase of the number of perfluoroalkyl tails did not necessarily lead to higher partition coefficients. Particularly high values were found for phosphines containing a total of 72 fluorinated carbon atoms on the meta position(s) of the aryl rings. Linear relationships were found between the predicted log P of 1(a, b, x, C4) and the experimentally determined log P values of fluorous diphosphines [CH(2)P[C(6)H(4)(SiMe(3-b)(CH(2)CH(2)C(6)F(13))(b))-4](2)](2) and monophosphines Ph(3-a)P(C(6)H(4)(CH(2)CH(2)C(6)F(13))-4)(a). One of the most fluorophilic phosphines, i.e., 1(3, 1, 8, C3C5), was applied and efficiently recycled in rhodium-catalyzed, fluorous hydrosilylation of 1-hexene by HSiMe(2)Ph using PFMCH as the fluorous phase and the substrates as the organic phase. It was demonstrated that a higher partition coefficient of the ligand in PFMCH/toluene at 0 degrees C indeed resulted in less leaching of both the catalyst and the free ligand during phase separation.     

Surface characterization of biocidal polyurethane modifiers having poly(3,3-substituted)oxetane soft blocks with alkylammonium side chains

This paper focuses on surface characterization of P[ AB] copolyoxetane soft block polyurethanes having either fluorous (3FOx, -CH2OCH 2CF3) or PEG-like (ME2Ox, -CH2(OCH2CH2) 2OCH3), A side chains and alkylammonium, B side chains. Physical surface characterization data were analyzed in light of the previously observed order of antimicrobial effectiveness for a set of four surface modifiers. Ample physical evidence for surface concentration of fluorous 2 wt % P[ AB]-polyurethane modifiers was obtained from XPS, contact angles, ATR-IR spectroscopy, and TM-AFM. In TM-AFM phase imaging, the most effective biocidal surface modifier, 2 wt % HMDI-BD(30)/P[(3FOx)(C12)-0.89:0.11]-PU, showed a nanoscale phase-separated structure consisting of 200 nm domains with background features about 10 times smaller. Despite similar surface characterization data, the 2 wt % fluorous C6 analog ranked third in contact biocidal effectiveness. Physical evidence for surface concentration of 2 wt % P[(ME2Ox)(C12)-0.86:0.14]-PU was modest, considering that antimicrobial effectiveness was second only to 2 wt % HMDI-BD(30)/P[(3FOx)(C12)-0.89:0.11]-PU. In this set of surface modifiers, nanoscale morphology is largely driven by the fluorous component, whereas antimicrobial effectiveness is more strongly influenced by alkylammonium chain length. The effect of alkylammonium side chain length on surface concentration and antimicrobial behavior is more pronounced for ME2Ox polyurethanes compared to the 3FOx analogs.     

Acylation of 2,5-dimethoxycarbonyl[60]fulleropyrrolidine and synthesis of its multifullerene derivatives

2,5-Dimethoxycarbonyl[60]fulleropyrrolidine (1) is acylated with various chlorocarbonyl compounds to give fullerene derivatives with the general formula C(60)(MeOOCCH)(2)NC(O)R, R = (CH(2))(5)Br, (CH(2))(8)C(O)Cl (3), (CH(2))(4)C(O)Cl, or cis-C(6)H(4)(C(O)Cl. The monoacylated sebacoyl derivative 3 readily reacts with alcohols and amines such as methanol, diethylamine, glycine methyl ester, and aza-18-crown-6 through the remaining chlorocarbonyl group. Chromatography of 3 on silica gel converts it into the corresponding acid C(60)(MeOOCCH)(2)NC(O)(CH(2))(8)COOH (4). Treating 4 with PCl(5) regenerates the precursor 3 quantitatively. Piperazine reacts with 4 in the presence of DCC and BtOH to form a bisfullerene derivative in which two sebacoyl chains and the piperazine act as the bridge between two molecules of 1. Other molecules with multifunctional groups react with 4 similarly to form multifullerene derivatives. NMR data indicate that the rotation of the relatively bulky phthaloyl group is hindered around the amide bond N [bond] C(O), the rotation barrier of which is 15.06 kcal/mol. The relative stereochemistry of the 2,5-dimethoxycarbonyl groups is established by (1)H NMR spectra and further confirmed by resolution of the enantiomeric 2,5-trans-isomer of the starting material 1.     

Synthesis, structure, and reactivity of fluorous phosphorus/carbon/phosphorus pincer ligands and metal complexes

Reactions of the diphosphine 1,3-C6H4(CH2PH2)2 and fluorous alkenes H2C=CHR(fn)(R(fn)=(CF2)(n-1)CF3; n = 6, 8) at 75 degrees C in the presence of AIBN give the title ligands 1,3-C6H4(CH2P(CH2CH2R(fn))2)2(3-R(fn)) and byproducts 1,3-C6H4(CH3)(CH2P(CH2CH2R(fn))2)(4-R(fn)) in 1 : 3 to 1 : 5 ratios. Workups give -R(fn) in 4--17% yields. Similar results are obtained photochemically. Reaction of 1,3-C6H4(CH2Br)2 and HP(CH2CH2R(f8))2 (5) at 80 degrees C (neat, 1 : 2 mol ratio) gives instead of simple substitution the metacyclophane [1,3-C6H4(CH2P(CH2CH2R(f8))2 CH2-1,3-C(6)H(4)CH(2)P[lower bond 1 end](CH2CH2R(f8))2C[upper bond 1 end]H2](2+)2Br-, which upon treatment with LiAlH(4) yields 3-R(f8)(20%), 4-R(f8), and other products. Efforts to better access 3-R(f8), either by altering stoichiometry or using various combinations of the phosphine borane (H3B)PH(CH2CH2R(f8))2 and base, are unsuccessful. Reactions of 3-R(fn) with Pd(O2CCF3)2 and [IrCl(COE)2]2(COE=cyclooctene) give the palladium and iridium pincer complexes (2,6,1-C6H3(CH2 P(CH2CH2R(fn))(2)(2)Pd(O2CCF3)(10-R(fn); 80-90%) and (2,6,1-C6H3(CH2P(CH2CH2R(f8))2)2)Ir(Cl)(H)(11-R(f8); 29%), which exhibit CF3C6F(11)/toluene partition coefficients of >96 : <4. The crystal structure of 10-R(f8) shows CH2CH2R(f8) groups with all-anti conformations that extend in parallel above and below the palladium square plane to create fluorous lattice domains. NMR monitoring shows a precursor to 11-R(f8) that is believed to be a COE adduct.     

Syntheses and reactions of the fluorinated cyclic thionylphosphazene NSO(Ar)[NPF(2)]2(Ar = 4-t-BuC(6)H(4)-) with difunctional reagents

The S-aryl substituted thionylphosphazene (Cl(2)PN)(2)[4-t-BuC(6)H(4)(O)SN] (1) was prepared by Friedel-Craft's reaction of NSOCl(NPCl(2))(2) with tert-butylbenzene. When it reacted with excess KSO(2)F at 110 degrees C, the P-Cl bonds of 1 were fluorinated, yielding the tetrafluorothionylphosphazene, (F(2)PN)(2)[4-t-BuC(6)H(4)(O)SN] (2). An equimolar reaction of 2 with dilithiated 1,3-propanediol in THF at -78 degrees C resulted in the formation of the ansa-substituted compound CH(2)(CH(2)O)(2)[FPN](2)[4-t-BuC(6)H(4)(O)SN] (3). The crystal structures of 2 and 3 were determined. In 3 the ansa ring is trans on the PNS heterocycle with respect to the aryl group. Reaction of 2 with the disiloxane (CF(2)CH(2)OSiMe(3))(2), in the presence of catalytic amounts of CsF in THF at 90 degrees C, resulted in the formation of the dispiro compound [(CF(2)CH(2)O)(2)PN](2)[4-t-BuC(6)H(4)(O)SN] (4). Compounds 1-4 were characterized by IR, NMR ((1)H, (13)C, (19)F, (31)P), mass spectral, and elemental analyses.     

A new fluoroaluminophosphate chain with an Al/P ratio of unity

A new compound, Al2P2O8F2.[(CH3)2CHNH2CH2CH2NH2CH(CH3)2] (denoted AlPO-CJ8), with a 1-dimensional fluoroaluminophosphate chain and an Al/P ratio of unity has been synthesized solvothermally by using isopropylamine as an organic additive. It is characterized by X-ray powder diffraction (XRD), inductively coupled plasma (ICP), ion selective electrodes (ISE), and TGA-DTA analyses and structurally determined by single-crystal X-ray diffraction analysis. AlPO-CJ8 crystallizes in the triclinic space group P1 with a = 5.0306(8) A, b = 9.3626(15) A, c = 10.6131(17) A, alpha = 65.949(4) degrees, beta = 88.218(4) degrees, gamma = 77.19 degrees, and Z = 2. Its structure is built up by alternation of tetrahedral PO3(=O) and AlO3F units to form infinite 1-D Al2P2O8F2(2-) macroanionic chains. The inorganic chains are held together by diprotonated N,N'-diisopropylethylenediamine through H-bonds. The organic species N,N'-diisopropylethylenediamine is believed to be formed through solvothermal reaction of the organic additive isopropylamine and the solvent ethylene glycol. The existence of terminal P=O and Al-F bond groups in the 1-D chain indicates that it has potential to further set up higher dimensional networks through condensations.     

Unusual reactivity of tris(pyrazolyl)borate zirconium benzyl complexes

The synthesis and reactivity of [Tp*Zr(CH2Ph)2][B(C6F5)4] (2, Tp* = HB(3,5-Me2pz)3, pz = pyrazolyl) have been explored to probe the possible role of Tp'MR2+ species in group 4 metal Tp'MCl3/MAO olefin polymerization catalysts (Tp' = generic tris(pyrazolyl)borate). The reaction of Tp*Zr(CH2Ph)3 (1) with [Ph3C][B(C6F5)4] in CD2Cl2 at -60 degrees C yields 2. 2 rearranges rapidly to [{(PhCH2)(H)B(mu-Me2pz)2}Zr(eta2-Me2pz)(CH2Ph)][B(C6F5)4] (3) at 0 degrees C. Both 2 and 3 are highly active for ethylene polymerization and alkyne insertion. Reaction of 2 with excess 2-butyne yields the double insertion product [Tp*Zr(CH2Ph)(CMe=CMeCMe=CMeCH2Ph)][B(C6F5)4] (4). Reaction of 3 with excess 2-butyne yields [{(PhCH2)(H)B(mu-Me2pz)2}Zr(Cp*)(eta2-Me2pz)][B(C6F5)4] (6, Cp* = C5Me5) via three successive 2-butyne insertions, intramolecular insertion, chain walking, and beta-Cp* elimination.     

Highly fluorous complexes of nickel, palladium and platinum: solubility and catalysis in high pressure CO2

A variety of Group 10 metal complexes [MXY(dfppp)], M = Ni, X, Y = Cl, Br, M = Pd, Pt, X, Y = Cl or CH(3), containing the recently reported highly fluorous diphosphine ligand, dfppp, 1,3-bis[di(fluoroponytail)phosphino]propane, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(3) have been synthesised. They have been characterised by NMR, mass spectrometry and microanalysis, with two platinum complexes, [PtCl(2)(dfppp)] and [PtClMe(dfppp)], structurally characterised by single crystal X-ray diffraction studies. The highly fluorous nature of the ligands affords the complexes good supercritical CO(2) solubility as measured by supercritical fluid extraction (SFE), and has allowed for the copolymerisation of CO and ethylene using [PdClMe(dfppp)] as the catalyst precursor and CO(2) as the solvent. Additionally, PtCl(2) complexes of the new ligands dfppb, {(p-F(13)C(6)C(6)H(4))(2)P}(2)(CH(2))(4), and dfpop, {(p-F(13)C(6)C(6)H(4)O)(2)P}(2)(CH(2))(3), have also been prepared and characterised.     

Fluorous phase-transfer activation of catalysts: application of a new rate-enhancement strategy to alkene metathesis

Reactions of the bis(pyridine) complex (H2IMes)(Py)2(Cl)2Ru(=CHPh) and fluorous phosphines P(CH2CH2R(fn))3 (n = a, 6; b, 8; c, 10; R(fn) = (CF2)(n-1)CF3) give (H2IMes)(P(CH2CH2R(fn))3)(Cl)2Ru(=CHPh) (2a-c, 64-73%), which are analogs of Grubbs' second generation catalyst and effective alkene metathesis catalysts under organic monophasic and fluorous/organic biphasic conditions. The latter give rate accelerations, which are believed to arise from phase transfer of the dissociated fluorous phosphine.