GRAFT COPOLYMERIZATION OF ACRYLAMIDE ONTO POLYPROPYLENE FILMS BY PLASMA TECHNIQUE

The graft copolymerization of acrylamide onto polypropylene (PP) Film was carried out by using a capacitively coupled rf plasma apparatus with external plate electrodes. The relationship between the surface structure of the Ar plasma-treated PP films and the extent of grafting of acrylamide on the films was studied through observing the effects of discharge power and exposure time on the relative content of free-radical on the film surface. Meanwhile, the wettability and surface energy of the PP film were measured.     

预氧化聚烯烃膜的表面光接枝聚合

将经表面热氧化的聚丙烯和聚乙烯膜在不加敏化剂的情况下,通过紫外光照射与光稳定剂甲基丙烯酸(2,2,6,6-四甲基哌啶)酯进行接枝聚合,以改善膜的光稳定性。研究了各种因素,包括热氧化时间,光照射时间、单体浓度及溶剂等对表面预氧化膜的光接枝含量的影响。实验结果表明,常用的有机溶剂除酮类外均不能使膜接枝;接枝以后膜的光稳定性有很大的提高。     

Oxidation of polyethylene surface by glow discharge and subsequent graft copolymerization of acrylic acid

Plasma-induced graft copolymerization of acrylic acid, which was incorporated into PE films, was investigated here. The influence of plasma conditions such as plasma treatment gases, power, pressure, time, monomer concentration, and graft copolymerization time on polymerization yield was determined. The samples were characterized by ESCA, IR, and water contact angle. A respective chemical shift of the C1s signal of Ar or O₂ plasmatreated and untreated PE films was revealed by ESCA, in which the presence of the grafted PAAc was also verified. An increase in polymerization yield with plasma treatment duration and power was found. That the grafted copolymerization was limited to a very thin surface region was revealed by optical microscopy on the cross section of the grafted film. © 1993 John Wiley & Sons, Inc.     

Plasma copolymerization: Hexafluoropropylene and a nonpolymerizable gas

Plasma polymerized (PP) fluoropolymer films have been synthesized by the plasma copolymerization of hexafluoropropylene (HFP) and a nonpolymerizable gas. Plasma etching was inhibited by fluorine scavenging and HF formation on the addition of hydrogen and was accelerated on the addition of oxygen. Nitrogen, oxygen, and hydrogen were incorporated into the deposited polymer molecules when added to the HFP plasma. The polar component of surface tension increased on nitrogen addition and the dispersive component on hydrogen addition. The higher surface tension drove the deposition and coalescence of smaller particles from the gas phase polymerization yielding smooth surfaces. The significant drop in breakdown voltage on the addition of nitrogen was attributed to a different conduction mechanism in the relatively polar PP fluoropolymer film. © 1996 John Wiley & Sons, Inc.     

Plasma modification of polypropylene surfaces and grafting copolymerization of styrene onto polypropylene

The surface of polypropylene(iPP) is modified with glow discharge plasma of Ar,so that the modified surfaces of iPP films are obtained.The studies of scanning electron microscopy(SEM) show the surface etching pattern of iPP films. The chemical structures of iPP films are confirmed by X-ray photoelectron spectroscopy(XPS) and Fourier transform infrared(FTIR) spectroscopy.The wetting properties of modified surfaces of iPP films are characterized by contact angle, and the free energy of surfaces is calculated.The free radical of modification surfaces of iPP is measured by chemical method.The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene(St) in St.The grafting polymer of St onto iPP is characterized by FTIR.The grafting rate is dependent on plasma exposure time and discharge voltage.The studies show that homopolymerization of St is undergone at the same time during the grafting-copolymerization of St onto iPP.     

Conductive thin film formation onto radiation grafted polymeric surfaces using electroless plating technique

Surface modification of polypropylene films (PP) was carried out via radiation induced graft copolymerization of 4‐vinyl pyridine (4VP) and acrylamide (AAm) to enhance the adhesion ability of the PP surface for electroless deposition of copper. Factors affecting the grafting process such as suitable solvent, comonomer composition and concentration and irradiation dose were optimized. The grafted films produced were characterized by studying their Fourier‐transform infrared (FTIR) spectra and thermal stability. The grafted films were copper‐plated by electroless deposition using Pd as the catalyst to initiate the redox reaction. The influence of catalytic activation method parameters on the plating rate were studied. Scanning electron microscopy revealed a dense and void‐free copper deposited film. The adhesion of the deposited copper film to the modified PP films was determined by measuring the tensile strength of the copper plated films. The electrical characteristics of the copper plated films in comparison with grafted films were studied. The results showed the high adhesion of the deposited copper film to the grafted PP film as well as the high electrical conductivity. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface roughness and hydrophilicity enhancement of polyolefin‐based membranes by three kinds of plasma methods

The introduction of antibacterial property, conductivity, wettability and antithrombogenicity into polyolefin‐based membranes has evoked much attention, which can be achieved by coating hydrophilic polymers. Therefore, it is necessary to modify the roughness and hydrophilicity of polyolefin‐based membranes to enhance the coating ability. In this paper, three kinds of plasma methods, including inductively coupled (ICP) plasma, radio frequency low pressure (RFP) plasma and atmospheric dielectric barrier discharge (DBD) plasma, were used to modify the surface of the polyethylene (PE), polypropylene (PP) and polyester‐polypropylene (PET–PP) membranes. The surface roughness of the plasma‐modified PE, PP and PET–PP films was investigated by scanning electron microscopy (SEM) and atomic force microscope (AFM). The polar functional groups of films were observed by energy dispersive spectrometer (EDX) and X‐ray photoelectron spectroscopy (XPS). Besides, the hydrophilicity of the plasma‐modified PE, PP and PET–PP films was evaluated by water contact angle measurement. It was found that the surface roughness and hydrophilicity of plasma‐modified PE, PP and PET–PP films increased with the generation of oxygen‐containing functional groups (i.e. C―O, and C?O). The PET–PP membranes were treated by RFP plasma at different processing powers and times. These results indicated that plasma is an effective way to modify films, and the treatment time and power of plasma had a certain accumulation effect on the membranes' hydrophilicity. As for the roughness and hydrophilicity, the DBD plasma modifies the PE film, which is the optimum way to get the ideal roughness and hydrophilicity. Copyright © 2015 John Wiley & Sons, Ltd.     

硝化纤维素与甲基丙烯酸甲酯的均相接枝共聚

借助付里叶红外光谱、Ｘ－射线衍射以及电子显微技术，结合化学提纯方法，检测纤维素分子中主要基团、分子取向度和超分子结构形态等方面的变化，考察了均相条件下硝化纤维素与甲基丙烯酸甲酯接枝共聚物的形成与发生接枝共聚反应的部位，探索均相接枝的可能反应机理。     

Comparison of the surface characteristics of polypropylene films treated by Ar and mixed gas (Ar/O2) atmospheric pressure plasma

In an attempt to modify the hydrophobic surface properties of polypropylene (PP) films, this study examined the optimum process parameters of atmospheric pressure plasma (APP) using Ar gas. Under optimized conditions, the effects of a mixed gas (Ar/O2) plasma treatment on the surface-free energy of a PP film were investigated as a function of the O2 content. The polar contribution of the surface-free energy of the PP film increased with increasing O2 content in the gas mixture. However, slightly more oxygen-containing polar functional groups such as CO, CO, and COO were introduced on the PP film surface by the Ar gas only rather than by the Ar/O2 gas mixture. In addition, AFM analysis showed that the Ar plasma treatment of the PP film produced the smoothest surface as a result of the relatively homogeneous etching process.     

Surface modification of SPEU films by ozone induced graft copolymerization to improve hemocompatibility

Surface modification of segmented poly(ether urethane) (SPEU) by graft copolymerization with N,N′-dimethyl-N-methacryloyloxyethyl-N-(3-sulfopropyl) ammonium (DMMSA), a zwitterionic sulfobetaine structure, was conducted. A simple two-step procedure for grafting of DMMSA onto the surface of SPEU film was used. The surface was first treated with ozone to introduce active hydroperoxide groups. The active surface was then exposed to the DMMSA solution in the sealed tube. Grafted SPEU film was characterized by ATR–FTIR, XPS and contact angle measurement. ATR–FTIR and XPS investigations confirmed the graft copolymerization. The monomer concentration, copolymerization temperature and time were varied to maximize the efficiency of DMMSA grafting. The equilibrium water content (EWC) and contact angle measurements showed that the hydrophilicity of the film had been greatly improved. The blood compatibility of the grafted films was evaluated by platelet adhesion in platelet rich plasma (PRP), deposits in blood control and protein adsorption in bovine fibrinogen using SPEU film as the control. No platelet adhesion and no thrombus were observed for the grafted films incubated in PRP for 300 min and in blood for 120 min, respectively. The protein adsorption was reduced on the grafted films after incubation in bovine fibrinogen for 120 min. These results proved that improved blood compatibility was obtained by grafting this new zwitterionic sulfobetaine structure monomer onto SPEU film.     

聚丙烯粉料固相光接枝马来酸酐的研究

聚丙烯（ＰＰ）由于其优越的性能价格比而具有广泛的用途，但ＰＰ的非极性、易氧化等缺点使其在一些重要领域中的应用受到限制，因此需采用涂层法、等离子体处理、接枝法等方法对ＰＰ改性．其中ＰＰ表面接枝共聚法可使其脱去主链氢原子，引入极性基团，改善染色性和亲水性...     

Reflective and conductive surface‐silvered polyimide films prepared by surface graft copolymerization and electroless plating

Argon plasma‐pretreated polyimide (PI) films were subjected to UV‐induced surface graft copolymerization with 4‐vinylpyridine(4VP) under atmospheric conditions. Electroless plating of silver was carried out effectively on the 4VP graft copolymerized PI (PI‐g‐P4VP) surface after PdCl₂ activation and in the absence of SnCl₂ sensitization (the Sn‐free process). The surface compositions of the modified PI films were studied by X‐ray photoelectron spectroscopy (XPS). XPS results showed that the PI‐g‐P4VP surface is ready for electroless deposition of silver via the Sn‐free process. The grafted 4VP layer with well‐preserved pyridine groups was used not only as the chemisorption sites for the palladium complexes (without the need for prior sensitization by SnCl₂) during the electroless plating of silver, but also as an adhesion promotion layer for the electrolessly deposited silver. The silver metallized PI films show high reflectivity and conductivity with a surface resistance of 1.5 Ω and a reflectivity of 91.3%, respectively. Copyright © 2007 John Wiley & Sons, Ltd.     

The mechanism of formation of polymer films from heptane in a low-temperature,low-pressure plasma

Calculations of the apparent activation energy for the growth of macromolecular entities in the form of cones on the surface of a growing film, as well as the apparent activation energy for the interaction of free radicals of the film with air oxygen after exposure of the film to the atmosphere, confirmed the existence of three steps of the formation of polymer films from heptane in a low-temperature, low-pressure plasma. It was found that the cones have a structure other than that of the film on which they are formed.     

原生态聚丙烯等离子体处理接枝甲基丙烯酸甲酯

将等离子体接枝技术，用于原生态聚丙烯接枝甲基丙烯酸甲酯共聚物的合成。ＦＴ－ＩＲ证明所得产物为接枝共聚物，研究了不同等离子体处理功率、时间，不同接枝聚合反应时间、温度对接枝的影响，以及稀释剂、聚丙烯粒度对接枝的影响。结果表明，接枝过程中有自动加速现象，稀释剂亦使接枝有加速效应。接枝过程为扩散控制过程。     

Preparation and properties of plasma-initiated graft copolymerized membranes for blood plasma separation

A hydrophilic composite membrane for blood plasma separation has been prepared by surface graft copolymerization initiated by low-temperature plasma (LTP). After short LTP pre-irradiation onto a microporous polypropylene (PP) membrane, N-N-dimethylacrylamide (DMAA) vapor was introduced for grafting. The PP membrane had a 0.45 μm effective pore size and a 130 μm thickness. The rate of DMAA grafting onto PP was very high, even in vapor-solid phase reaction under reduced pressure; DMAA 1 mm Hg (133Pa). The percentage of grafted poly-DMAA (PDMAA) reached 15% within 5 min post graft polymerization, and the membrane surface, including the interior surface of pores, became completely hydrophilic. There was no apparent change observed in the membrane morphology in the dry state after the PDMAA-grafted layer was formed. However, water flux significantly decreased, probably due to swelling of the PDMAA-grafted layer. With a grafting yield below 17%, the PDMAA-grafted PP (PP-g-PDMAA) membrane showed a good separation capability of plasma from whole blood. The PP-g-PDMAA membrane exhibited low complement activating potential, high sieving coefficient for plasma proteins and high blood compatibility. Decreases in adsorption of blood cells, plasma proteins, and other biomolecules may be the reason for the membrane performance.     

低介电常数聚喹啉衍生物薄膜的合成与表征

采用等离子体聚合技术合成了一种新型的低介电常数聚喹啉衍生物薄膜: 聚3-氰基喹啉(PP3QCN)薄膜. 借助于傅里叶变换红外光谱(FT-IR)、紫外-可见(UV-Vis)吸收光谱、X光电子能谱(XPS)和原子力显微镜(AFM)对薄膜结构进行了系统表征. 结果表明, 等离子体聚合条件对沉积膜的化学结构、表面组成、膜形态以及介电性能均有影响. 在较低的等离子体放电功率(10 W)条件下, 可得到具有较高芳环保留率和较大π-共轭体系的高质量聚3-氰基喹啉薄膜材料; 而在较高功率(25 W)条件下, 聚合过程中会出现比较严重的单体分子破碎, 形成较多非π-共轭体系的聚合物, 从而导致聚3-氰基喹啉的共轭度降低. 聚3-氰基喹啉薄膜的介电性能测试结果表明, 低放电功率(10 W)条件下制得的聚3-氰基喹啉薄膜具有比较低的介电常数值, 仅为2.45.     

Functionalization of polyethylene surface using plasma-induced graft copolymerization of acrylic acid

Plasma-induced graft copolymerization of acrylic acid onto PE films was investigated. The influence of plasma treatment power, pressure, time, graft copolymerization time, and monomer concentration on polymerization yield was determined. A chemical shift of the Cls signal of Ar plasma treated and untreated PE films was revealed by ESCA, which also verified the presence of grafted PAAc. An increase in graft polymerization yield with plasma treatment time and power was found. Both the plasma treated film and the subsequently grafted film were shown to be hydrophilic. Only the grafted film, however, shows an invariably low contact angle. The decomposition of peroxides upon heating was followed by a simple first-order reaction. © 1993 John Wiley & Sons, Inc.     

Electroless deposition of nickel on fluoropolymers modified by surface graft copolymerization

Surface modification of Ar plasma-pretreated poly(tetrafluoroethylene) (PTFE) and poly(vinylidene fluoride) (PVDF) films via UV-induced graft copolymerization with 4-vinylpyridine (4VP), 2-vinylpyridine (2VP) or 1-vinylimidazole (VIDz) was carried out. Electroless deposition of nickel could be carried out on these graft-modified fluoropolymer surfaces after PdCl₂ activation. The surface compositions of the graft-modified films were studied by X-ray photoelectron spectroscopy. The adhesion strength between the surface graft-copolymerized fluoropolymer film and the electrolessly deposited nickel was affected by the type of monomers used for graft copolymerization and the graft concentration. The optimum T-peel adhesion strengths of the electrolessly deposited Ni on the 4VP graft-copolymerized PTFE and PVDF surfaces were about 7 and 13 N/cm, respectively. The metal/fluoropolymer assemblies delaminated by cohesive failure inside the fluoropolymer substrates. The enhanced adhesion between the electrolessly deposited Ni and the surface-modified fluoropolymers is attributable to the interfacial charge transfer interactions between the grafted polymer chains and the deposited metals (Pd and Ni), the spatial distribution of the graft chains into the metal matrix and the covalent tethering of the graft chains on the fluoropolymer surface.     

Graft copolymerization kinetics of acrylic acid onto the poly(ethylene terephthalate) surface by atmospheric pressure plasma inducement

After one atmospheric pressure plasma treatment of poly(ethylene terephthalate) (PET) film, acrylic acid (AAc) in aqueous solution was successfully graft‐copolymerized onto PET films. The effects of reaction time, AAc monomer concentration and reaction temperature on grafting behavior of AAc were systematically studied. Possible reaction kinetics of plasma‐induced graft copolymerization, starting from initial hydroperoxide decomposition, were proposed. Through the Arrhenius analysis about graft copolymerization kinetics of AAc monomers on PET surface, it was revealed that the activation energies of decomposition, propagation and termination were 98.4, 63.5, and 17.5 kJ/mol, respectively. The temperature around 80 °C was favorable not only for the formation of oxide radicals through the thermal decomposition of hydroperoxide on PET surface but also for the extension of graft copolymer chain through direct polymer grafting. Poly(acrylic acid) (PAAc) grains grafted onto PET surfaces possessed relatively uniform size and both PAAc grain size and surface roughness increased with increasing the grafting degree of AAc. The increase of grain size with increasing grafting degree results from the possibility of forming long chain graft copolymers and their shielding of reactive sites. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1594–1601, 2008     

Conducting polymer films fabricated by oxidative graft copolymerization of aniline on poly(acrylic acid) grafted poly(ethylene terephthalate) surfaces

A conductive polyaniline/poly(ethylene terephthalate) (PANI/PET) composite film was fabricated via the oxidative graft copolymerization of aniline (ANI) onto the plasma-induced poly(acrylic acid) (PAAc) grafted PET surface. The attenuated total reflectance Fourier transform infrared spectroscopy spectra (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) results confirmed that PANI was successfully grafted onto the surface of the PAAc-g-PET films. The effects of the experimental conditions on the percentage of PANI grafted onto the PAAc-g-PET films were extensively investigated. A very high grafting percentage of ANI can be obtained through the acid-base reaction between the aniline monomer and PAAc on the PAAc-g-PET surface at high temperature. As a result, the grafting percentage of PANI can be increased to as high as 12.18 wt %, which causes the surface resistance of the PANI-g-PAAc-g-PET film to be reduced to about 1000 Omega/sq. We predicted that this is because of the high flexibility of the PAAc molecular chains and high solubility of aniline, both of which facilitate the binding of aniline to PAAc during this high temperature acid-base reaction. It was observed by atomic force microscopy (AFM) that the PANI-modified PET surface exhibits higher size irregularity and surface roughness, which further indicated that a much greater number of aniline molecules can be reactively bonded to and distributed along the grafted AAc chains and that the PANI-g-PAAc-g-PET surface resulting from the sequential oxidative graft copolymerization can possess higher electrical conductivity.