Functional monomers and polymers. XXXV. Oxidation of hydroquinone catalyzed by Cu(II)–polyelectrolyte complexes

Oxidation of hydroquinone catalyzed by copper(II) complexes of poly-1-vinylimidazole, vinylamine-vinylacetamide copolymer, and polyethyleneimine was studied in aqueous solution at 25°C. The rate of oxidation was determined spectrophotometrically over several pH values. The rate of copper(II) reduction was evaluated from copper(I)–cuproin complex formation, and the reoxidation of copper(I) to copper(II) was observed by visible spectroscopy. Among the copper(II) complexes, poly-1-vinylimidazole complex exhibited excellent catalytic activity, which amounted to over 20 times that of aqueous copper(II) ion solution, while the reduction of copper(II) in the former system was slower than that in the latter system. The reoxidation of copper(I) to copper(II) was found to be completed immediately in the presence of polymer ligands such as poly-1-vinylimidazole, while copper(I) ion was only slowly reoxidized. The discussion of the reaction mechanism emphasizes the importance of the reoxidation process.     

Functional monomers and polymers. XCV. Photochemical reactions on synthetic polymers having pendant thymine bases in polymethyl methacrylate film

The photodimerization reaction of synthetic polymers which contain thymine bases was studied in polymethyl methacrylate film. The quantum efficiency for the photodimerization of the thymine bases of polyacrylate and polymethacrylate, fixed in the polymethyl methacrylate film was measured. The value of the film was higher than those measured in solution.     

Hydroquinone-bridged dinuclear Cu(II) complexes and single-crystalline Cu(II) coordination polymers

Cationic dinuclear Cu(II) complexes 3 and 4 have been prepared using the novel hydroquinone-based imine chelators 2,5-((i)Pr(2)NCH(2)CH(2)N[double bond, length as m-dash]CH)(2)-1,4-(OH)(2)-C(6)H(2) (1) and 2,5-(pyCH(2)CH(2)N[double bond, length as m-dash]CH)(2)-1,4-(OH)(2)-C(6)H(2) (2), respectively (py = 2-pyridyl). X-Ray quality crystals of both complexes were grown from their DMF solutions. The sterically more encumbered compound crystallizes in the form of discrete dinuclear entities with Cu(II) centres in a distorted square-planar ligand environment (one coordination site is occupied by a DMF molecule). The pyridyl derivative 4 features dinuclear hydroquinone-bridged subunits similar to 3. However, the Cu(II) ions are now six-coordinate with two DMF molecules at an axial and an equatorial position of a Jahn-Teller-distorted octahedron. Moreover, the dinuclear subunits are no longer isolated but linked with each other via bridging hydroquinone oxygen atoms which occupy the second apical position of each octahedron. The structure suggests that the magnetic properties of the resulting coordination polymer of 4 could be described by a model valid for dimerized spin chains. As a result of this analysis the antiferromagnetic coupling constants J(1)/k(B) = 9.9 K (intradimer) and J(2)/k(B) = 0.9 K (interdimer) are obtained. Both in 3 and in 4, the hydroquinone --> semiquinone transition of the central bridging unit (E degrees ' = + 0.57 V, 3; E degrees ' = + 0.51 V, 4; DMF; vs. SCE) displays features of chemical reversibility. In the case of , reduction of Cu(II) centres requires a peak potential of E(p) = - 0.42 V.     

Synthesis and characterization of Cu(II), Co(II) and Ni(II) coordination polymers containing bis(imidazolyl) ligands

Two structurally related flexible imidazolyl ligands, bis(N-imidazolyl)methane (L₁) and 1,4-bis(N-imidazolyl)butane (L₂), were reacted with Cu(II), Co(II) and Ni(II) salts of aliphatic/aromatic dicarboxylic acids resulting in the formation of a number of novel metal–organic coordination architectures, [CuB₂(ox)₂(L₁)₂(H₂O)₂] · 4H₂O (1) (ox = oxalate), [Cu(pdc)(L₂)_1.5] · 4H₂O (2, pdc = pyridine-2,6-dicarboxylate), [Co(L)₂(H₂O)₂](tp) · 4H₂O (3, tp = terephthalate), [Ni(L₁)₂(H₂O)₂](ip) · 5H₂O (4, ip = isophthalate), [Cu₂(L₁)₄(H₂O)₄](tp)₂ · 7H₂O (5), [Co(mal)(L₁)(H₂O)] · 0.5MeOH (6, mal = malonate), [Co(pdc)(L₁)(H₂O)] (7). All the complexes have been structurally characterized by X-ray diffraction analysis. The different coordination modes of the dicarboxylate anions, due to their chain length, rigidity and diimidazolyl functionality, lead to a wide range of different coordination structures. The coordination polymers exhibit 1D single chain, ladder, 2D sheet and 2D network structures. The aliphatic and aromatic dicarboxylates can adopt chelating μ₂ and chelating-bridging μ₃ coordination modes, or act as uncoordinated counter anions. The central metal ions are coordinated in N₂O₄, N₄O₂, N₂O₃ and N₃O₃ fashions, depending on the ancillary ligands. The topology of 1 gives rise to macrocycles which are connected through hydrogen bonds to form 1D chains, whereas compound 2 exhibits a 1D polymeric ladder in which the carboxylate acts as a pincer ligand. Compounds 3–5 show doubly bridged 1D chains, and the dicarboxylate groups are not coordinated but form 2D corrugated sheets with water molecules intercalated between the cationic layers. Compound 6 has a 2D network sheet structure in which each metal ion links three neighboring Co atoms by the bis(N-imidazolyl)methane ligand. The cobalt compound 7, with a 2D polymeric double sheet structure, is built from pincer carboxylate (pdc) and 1,4-bis(N-imidazolyl)methane ligands.     

Poly(N-acylethylenimine) copolymers containing pendant pentamethyldisiloxanyl groups. II. Thermal behavior and x-ray diffraction study

Two series of random copolymers of 10-(pentamethyl disiloxanyl) decyl oxazoline ( Si ) with undecyl ( U ) (four copolymer compositions) and nonyl ( N ) (eight copolymer compositions) oxazolines over the whole composition range, with a total degree of polymerization of about 100, were studied by DSC and wide angle X-ray diffraction. All the polymers are crystalline. For the N/Si copolymers, the melting points, normalized ΔH and ΔS of fusion are almost constant in a broad range of copolymer composition from 10 to 65 mol % of Si . The rationale for this behavior is that the copolymers crystallize two dimensionally, with the crystalline polymethylene plates separated by the bulky flexible pentamethyl disiloxanyl ( P ) groups. In this range, increasing Si only increases the distance between the plates. With more than 65 mol % Si , the bulky P groups interfere with the packing of the alkyl chains and change the crystallization behavior; the polymers show disordered packing as demonstrated by their X-ray patterns and extremely low ΔH. In the U/Si copolymers, since the undecyl side chain has one more carbon than the decyl group to which the P group is attached, the P groups interfere much more strongly with the packing of the side chains than in the N/Si polymers. The copolymer melting points uniformly decrease as the concentration of Si increases. The plateau on the plot of normalized ΔH versus polymer composition is only from 10 to 50 mol % of Si . The average long spacings of the annealed polymers increase linearly from 24 Å ( N/Si polymers) or 28 Å ( U/Si polymers) to 34.1 Å with the increase of Si up to 50%. With more than 50% Si , the polymers have an identical lamellar thicknesses of 34 Å, within the experimental error. Copolymers with less than 75 mol % of Si can crystallize from hexadecane solutions forming gels down to polymer concentrations of 2-3 wt %. The long spacings of the gels are almost identical with those of the pure crystalline polymers and independent of the polymer/solvent ratios. When hexamethyl disiloxane is added to the solutions, it can intercalate and the resulting crystalline gels have long spacings larger than those found in the absence of siloxane.     

Functional monomers and polymers. LIII. Kinetic study on the oxidation of Cu(I)·polyvinylimidazole complexes by molecular oxygen

The autoxidation of Cu(I) complexes with imidazole and polyvinylimidazole derivatives was studied by observing the formation of the corresponding Cu(II) complexes with a stopped-flow technique. The reaction was second order and proportional to the concentrations of Cu(I) and oxygen. In the Cu(I)-imidazole complex pH variation was without effect in the range of 7.5-8.6. The oxidation rate of Cu(I).polyvinylimidazole complexes, on the other hand, decreased with a rise in pH. The activation parameters of the Cu(I)·polyvinylimidazole complexes, compared with those of the Cu(I).imidazole complex, were characterized by large enthalpic requirements coupled with favorable entropies of activation. This was explained by the fact that a conformational change in the polymeric ligands took place during oxidation.     

Poly(N-acylethylenimine) copolymers containing pendant pentamethyldisiloxanyl groups. I. Synthesis

10-(Pentamethyl disiloxanyl) decyl oxazoline ( Si ) was synthesized. It was copolymerized with either undecyl ( U ) or nonyl ( N ) oxazolines using methyl 4-nitrobenzenesulfonate as initiator. Two series of random poly(N-acylethylenimine) copolymers, U/Si and N/Si , were synthesized over the whole composition range of Si monomer with a total degree of polymerization of about 100. Narrow molecular weight distributions were obtained. At a monomer to initator ratio of about 1060, the final degree of polymerization was 374 with a polydispersity index of 1.93. This shows the effect of chain transfer in this system.     

Synthesis and characterization of styrenic polymers with pendant pyrazole groups. II

The synthesis of styrenic monomers that have pyrazolic or bipyrazolic pendant groups is described. Their homopolymerization and their copolymerization with maleic anhydride (MA) and N-(3-acetoxy propyl) maleimide is reported. The monomers were prepared from the Williamson reaction between 2-pyridine carbinol, hydroxy monopyrazole, hydroxy bipyrazole, and chloromethyl styrene. The homopolymerizations of such styrenic monomers were tried under different conditions, which led to low molecular weight polymers with a high polydispersity. However, alternating copolymers were obtained using maleic anhydride or N-(3-acetoxy propyl) maleimide as comonomers, as shown by ¹H-NMR, elemental analysis, and reactivity ratios r₁ and r₂. Furthermore, the hydrolysis of the acetate function of different copolymers was performed quantitatively. Unlike the acetoxy copolymers, such products do not have any glass transition temperature. Thermogravimetric investigations have shown that these copolymers exhibit good thermostability. © 1994 John Wiley & Sons, Inc.     

Polyimides having pendant hydroxy and acetoxy groups. II. Polyimides derived from bisaminoalcohols

Polyamic acids were prepared from bisaminoalcohols and pyromellitic dianhydride. They were converted to polyimides having pendant hydroxy groups by heating them in toluene or xylene (η_inh = 0.22–0.34 dl/g). Treatment of these polyamic acids with a mixture of pyridine and acetic anhydride gave polyimides having pendant acetoxy groups (η_inh = 0.22–1.04 dl/g). These acetoxypolyimides were converted to hydroxypolyimides (η_inh = 0.20–0.81 dl/g) by an ester-exchange reaction. Furthermore, the hydroxypolyimides were easily acetylated to give acetoxypolyimides.     

Inorganic coordination polymers. VIII. Cobalt(II) and zinc(II) phosphinate polymers and copolymers

The preparation, properties, x-ray powder patterns, and TGA curves are given for cobalt(II) dimethyl-, methylphenyl- and diphenylphosphinate. The polymeric character of cobalt(II) methylphenylphosphinate is demonstrated by its colligative properties and melt indexes. These cobalt(II) phosphinates along with hybrid copolymers of zinc(II) or cobalt(II) were prepared by the reaction of the metal acetate with the appropriate phosphinic acid or mixture of phosphinic acids. A consideration of the hybrid copolymers leads to the conclusion that both the zinc(II) and cobalt(II) dimethyl- and diphenylphosphinates are likewise polymeric. Thermal stability is discussed in terms of the structures suggested, and it is shown that crystallinity is related to polymer symmetry.     

Functional monomers and polymers. LXXXVI. Photochemical reactions on synthetic polymers with pendant thymine bases: Effect of solvents

Photodimerization of thymine bases present on the side chain of acryloyl and methacryloyl-type polymers was studied in dimethyl sulfoxide, dimethylformamide, and dimethyl sulfoxide—ethylene glycol mixture. Quantum efficiencies for photodimerization and quenching with isoprene were influenced by the solvents. The self-association of thymine bases estimated from their ultraviolet (UV) spectra and intrinsic viscosity were related to the effect of solvent on the photodimerization.     

Functionality and structure of polymers. I. Photoreaction and fluorescence of polyesters having pendant anthryl groups

Various polyesters having pendant (9-anthryl)methyl groups were prepared from 2-(9-anthryl)methylpropane-1,3-diol and the esters or chlorides of dicarboxylic acids. These polyesters are poly[2-(9-anthryl)-methylpropane-1,3-diyl-oxy-(9-anthryl)methylmalonyl-oxy](PA-1A), poly-[2-9-anthrylmethylpropane-1,3-diyl-oxysuccinyloxy](PA-2), poly-[2-9-anthrylmethylpropane-1,3-diyl-oxyadipyloxy](PA-4), poly[2-(9-anthryl)methylpropane-1,3-diyl-oxysebacyloxy] (PA-8), poly[2-(9-anthryl)methylpropane-1,3-diyl-oxy-(1-naphthyl)methylmalonyloxy](PA-1N), and poly[2-(9-anthryl)methylpropane-1,3-diyl-oxyterephthaloyloxy](PA-Ph). Although the absorption spectrum of the anthryl group is not influenced by the change in the environment in which the anthryl group is located, the fluorescence spectra show characteristic change reflecting the environment around the chromophore. Dimer, aggregates, or excimer fluorescence of anthryl groups and energy transfer from naphthyl to anthryl groups for PA-1N were discussed. The rates of photodimerization of anthryl groups determined spectroscopically in dilute solutions for these polyesters and their monomer model compound(1,3-diacetoxy-2(9-anthryl)methylpropane) (MA), were in the following order; PA-8 > PA-4 > PA-1A > PA-2 > PA-Ph > MA. The effects of polymer structure on the photoreaction were discussed on the basis of information on molecular interactions obtained by fluorescence spectroscopy. The fraction of intramolecular cyclization was estimated from dependence of the rate of photoreaction on the concentration of the polyesters. When anthryl groups are linked by a long, flexible polymethylene chain (PA-8), intramolecular process predominates whereas intermolecular dimerization proceeds almost exclusively for a rodlike molecule(PA-Ph). These results are discussed from the viewpoint of the structure–functionality relationship in polymeric systems.     

Functional monomers and polymers. CVIII. Photodimerization of pendant thymine bases in thymine containing poly-lysine derivatives

The photodimerization reaction of pendant thymine bases in thymine-containing poly-lysine derivatives was studied over a wide range in aqueous solution. It was found that the quantum yield of the photodimerization of pendant thymine bases is affected mainly by the conformation of the polymers in solution. The differences in photoreaction behavior were discussed for poly-D -, poly-L -, and poly-DL -lysine derivatives.     

Functional monomers and polymers. XCVII. Synthesis of oligomer models of polyethyleneimine derivatives containing pendant thymine bases

A series of oligomer models of polyethyleneimine derivatives having pendant thymine bases were prepared by the reaction of carboxyethyl derivatives of thymine with oligomer amines using an activated-ester method. It was found that the hypochromicity values obtained from UV spectra and pKa values obtained from spectrophotometric titrations depend on the chain length of the oligomers and the thymine content of the polymers.     

Functional monomers and polymers. XCVI. Photochemical reactions on oligo- and polyethyleneimines which contain pendant thymine bases

The photodimerization reaction of oligo- and polyethyleneimine derivatives which contain pendant thymine bases in various amounts was studied in aqueous solution in a wide pH range and in N, N-dimethylformamide solution. The photodimerization reaction of these derivatives in poly(methyl methacrylate) was also studied. It was found that its quantum efficiency tended to increase as thymine units were added to the oligomers and copolymers. This result is discussed in terms of the effect of the nearest neighboring thymine units and singlet energy migration, particularly in the polymers.     

Enhanced hydrolytic activity of Cu(II) and Zn(II) complexes in highly cross-linked polymers

The chelate ligand tris[(1-vinylimidazol-2-yl)methyl]amine (5) was synthesized in five steps from commercially available starting materials. Upon reaction with ZnCl2 or CuCl2 in the presence of NH4PF6, the complexes [Zn5Cl]PF6 (6) and [Cu5Cl]PF6 (7) were obtained. The structure of both complexes was determined by single-crystal X-ray crystallography. Immobilization of 6 and 7 was achieved by co-polymerization with ethylene glycol dimethacrylate. The supported complexes P6-Zn and P7-Cu were found to be efficient catalysts for the hydrolysis of bis(p-nitrophenyl)phosphate (BNPP) at 50 degrees C. At pH 9.5, the heterogeneous catalyst P7-Cu was 56 times more active than the homogeneous catalyst 7. Partitioning effects, which increase the local concentration of BNPP in the polymer, are shown to contribute to the enhanced activity of the immobilized catalyst.     

Functional monomers and polymers. LXXI. Conformation and interaction studies of poly-L-lysine derivatives with pendant nucleic acid bases

Copolymers of L -lysine and L -lysine derivatives which contained nucleic acid bases substituted on the N^ε position were synthesized by grafting nucleic acid derivatives onto poly-L -lysine. The conformation and interaction of these copolymers in solution were studied by using spectroscopic measurements. They existed in helical conformation at neutral pH values, and the polymer complex formation among them was examined by ultraviolet (UV) measurements in organic solvents. A decrease in the nucleic acid base content of the copolymers resulted in a decrease in helical structures and also in interactions with the polymer-containing complementary bases.     

Poly(N-acylethylenimine) copolymers containing pendant pentamethyldisiloxanyl groups. III. Surface properties and abhesion

The surface properties and abhesion of both N/Si and U/Si series of random copolymers were studied by contact angle and peel strength measurements. When these copolymers are coated on clean glass slides, the contact angles of water on the polymer films are over 105° for copolymers with less than 50 mol % of Si , and 98-104° for those with more than 50 mol % of Si. All the polymers have similar critical surface energies, 21 dyn/cm (from hydrocarbon probes) and 20 dyn/cm (from EtOH/H₂O probes), within the experimental error. This demonstrates that the amide groups in the polymer backbones are buried and all the polymers have methyl surfaces. The copolymers with less than 50 mol % Si (for N/Si copolymers) or 20 mol % (for U/Si copolymers) are stable and show good abhesive properties toward Scotch magic tape at or below 50°C. The peel strengths of Scotch magic tape with the copolymer coated slides rise dramatically as the annealing temperatures approach to the melting points of the polymers.     

Synthesis and characterization of aromatic polymers containing pendant silyl groups. II. Aromatic polyamides

In order to improve the solubility of aromatic polyamides without significant loss of thermal stability, synthesis of aromatic polyamides containing pendant silyl groups was carried out by direct polycondensation of silylated aromatic diacids such as 2-trimethylsilylterephthalic acid (TSTA), 2,5-bis (trimethylsilyl) terephthalic acid (BTSTA), 5-trimethylsilylisophthalic acid (TSIA), 5-dimethylphenylsilylisophthalic acid (DMSIA), and 5-triphenylsilylisophthalic acid (TPSIA) with various aromatic diamines. The resulting polyamides had inherent viscosities in the range of 0.18–1.10 dL/g and showed improved solubilities toward aprotic polar solvents such as NMP, DMF, DMSO, etc. The prepared aromatic polyamides exhibited fairly good thermal stabilities, which were almost comparable to those of corresponding nonsubstituted aromatic polyamides. That is, thermogravimetric analysis (TGA) data revealed 10% weight losses at 358–500°C and residual weights at 700°C were 46–67% under nitrogen atmosphere. © 1992 John Wiley & Sons, Inc.     

Functional monomers and polymers. XCIII. Photochemical reactions on the acrylic and methacrylic copolymers containing thymine bases

Photodimerization of Polyacrylic and polymethacrylic derivatives with different pendant thymine unit content was studied in dimethylformamide solution. The quantum efficiency of thymine base for the photodimerization increased with increasing thymine content in the copolymers. The quenching study, which used isoprene as the quencher, revealed that the photodimerization resulted from excited singlet state increases with increasing thymine content. The photochemical results were discussed in terms of self-association of thymine bases in the polymer chain.