Demetallation of α, β, γ, δ-tetra(p-sulfophenyl)porphineiron(III) in sulfuric acid-ethanol-water media

The rate of demetallation of α, β, γ,δ-tetra(p-sulfophenyl)porphineiron (III), Fe(TPPS)^3-, was determined in sulfuric acid-ethanol-water media for 8.5-10.65M sulfuric acid at different temperatures. The overall reaction was the conversion of the complex Fe(TPPS)^3- into the diacid species H₄TPPS^2- without other spectrophotometrically important species being formed to an appreciable extent, as shown by three isosbestic points at 418, 462, and 563 nm. The rate was first order in the Fe(TPPS)^3- concentration. The pseudo-first-order rate constants k were exponentially dependent on the sulfuric acid concentration, and log k was linearly dependent on the Hammett acidity function –H₀. The average ΔH? and ΔS? values for five reaction media were 18.4 ± 1.4 kcal/mol and 19 ± 3 cal/°K · mol, respectively. The linear relationship between log k and (-H₀) and the approximately constant values of ΔH? ΔS? over the acid range investigated indicated that the same mechanism of demetallation was operative over this acid range. Because of the dependence of the pseudo-first-order rate constants on the acidity of the medium, the mechanism probably involves the addition of protons to pyrrole N atoms to assist in the breaking of iron (III)-nitrogen bonds.     

LIX 84 as an extractant for throium(IV), uranium(VI) and molybdenum(VI)

The extraction order of Th(IV), U(VI) and Mo(VI) based on pH_0.5 values is Mo(VI)>U(VI)>Th(IV). Quantitative extraction has been observed for U(VI) by mixture of 10% (v/v) LIX 84 and 0.1M dibenzoylmethane at pH 4.2 and by mixture of 10% LIX 84 and 0.05M HTTA in the pH range 5.5–7.3 and for Mo(VI) by 10% LIX 84 from chloride media at pH 1.5. The order of extraction of Mo(VI) from 1N acid solutions is HCl>H₂SO₄>HNO₃>HClO₄ and extraction decreases very rapidly with increase in the concentration of HCl as compared to that from H₂SO₄, HNO₃ and HClO₄ acid solutions. The diluents C₆H₆, CCl₄ and CHCl₂ are found to be superior ton-butyl alcohol and isoamyl alcohol for extraction of Mo(VI). Influence of concentration of different anions on the extraction of U(VI) and Mo(VI) has been studied. Very little extraction has been observed in case of Th(IV) by LIX 84 or its mixtures with other chelating extractants or neutral donors.     

Determination of inorganic acids by ion chromatography with n-tetradecylphosphocholine (zwitterionic surfactant) as the stationary phase and pure water as the mobile phase

A new ion chromatographic (IC) system, in which n-tetradecylphosphocholine (TDPC, a phosphobetaine type of zwitterionic surfactant) was used as the stationary phase, pure water as the mobile phase, and conductivity as the method of detection, has been developed for the determination of inorganic acids. Five model acids, HCl, HNO₃, HClO₄, H₂SO₄, and H₃PO₄, were separated to baseline and eluted in the order H₃PO₄ > HCl > HNO₃ > H₂SO₄ > HClO₄. When peak areas were plotted against the concentrations of the acids in samples, linear calibration curves were obtained. Ultimate determination limits were approximately 1 mmol L^–1, but the discrimination of the method between solutions of different concentration was better than 10 μmol L^–1 for those model analytes. Salts of divalent cations could also be separated, but they were eluted faster than the acids. No separation was observed for the salts of monovalent cations. This newly proposed approach is applicable to the simultaneous determination of the inorganic acids (produced by reactions of NO_x, SO_x, and HCl with water) in aerosols.     

Liquid-liquid extraction of 233Pa(V) with Aliquat 336</p> </p>

Summary The extraction of protactinium with Aliquat 336 (methyl-tri-caprylyl ammonium chloride) in toluene, cyclohexane and chloroform from HCl, HNO₃, H₂SO₄, HClO₄, HF and mixed HCl-HF media was investigated by radioactive tracer technique. Distribution ratios of protactinium between the aqueous solution and the organic phase were determined as a function of shaking time, concentrations of acid in aqueous solution phase, extractant concentration and type of diluents in the organic phase. Aliquat 336 can almost quantitatively extract protactinium from strong HCl solution. At the same time, small amounts of HF in HCl solutions have a strong effect on Pa distribution.</p> </p>     

Solvent extraction of hafnium(IV)

^{175, 181}Hafnium(IV) was extracted by HDBP in 2-ethylhexanol from 1–10M solutions of HClO₄, HCl and HNO₃, and 1–8M H₂SO₄. As with low polar organic phase diluents, the acidity dependence of the distribution ratio of Hf, D, passes through a minimum for HClO₄, HCl, and H₂SO₄ whereas only an increase of D can be observed with increasing HNO₃ concentration. From the slope analysis the following complexes were found to be extracted (HDBP=HA): HfA₄ at <4M HClO₄ and <5M HCl, lg K_extr=9, HfX₄(HA)₄ (X=ClO ₄ ⁻ , Cl⁻ or NO ₃ ⁻ ) at >5M HClO₄, >7M HCl and 1–10M HNO₃, Hf(SO₄)A₂(HA)_3–4 at <3M H₂SO₄, and Hf(SO₄)₂ (HA)₄ at >6M H₂SO₄. Coextraction of sulphate with hafnium from H₂SO₄ solutions was evidenced in experiments with macro concentrations of Hf(IV) and³⁵SO ₄ ²⁻ . Part XX: Coll. Czech. Chem. Commun., 40 (1975) 3617.     

Kinetics of Ce(IV) oxidation of α-keto acids in sulfuric-perchloric acid media

The rates of oxidation of four α-keto acids, glyoxylic, pyruvic, phenylglyoxylic, and 2-oxobutyric acids by Cerium(IV) in H₂SO₄? HaHSO₄ and H₂SO₄? HClO₄ solutions, have been studied spectrophotometrically. The rate data suggest that CeSO is the most reactive of the Cerium(IV)-sulfate complexes present in the H₂SO₄? NaHSO₄ and H₂SO₄? HClO₄ systems. The oxidation reaction is proposed to be a one-electron process with the rate-determining step being the decomposition of a α-ketoacid-Cerium(IV) complex to a free radical and carbon dioxide through a transition state.     

Extraction of U(VI) by cyanex-272

Extraction of U(VI) from HNO₃, HCl and HClO₄ media using cyanex-272 (bis[2,4,4 trimethyl pentyl] phosphinic acid)/n-dodecane has been carried out. In the case of HNO₃ and HClO₄ media, the distribution ratio (D) value first decreases and then increases, whereas from HCl medium it first decreases and then remains constant with increase in H⁺ ion concentration. At lower acidities, U(VI) was extracted as UO₂(HA₂)₂ by an ion exchange mechanism, whereas at higher acidities as UO₂(NO₃)₂ ^.2(H₂A₂) following a solvation mechanism. The D for U(VI) by cyanex-272, PC-88A and DEHPA at low acidities follows the order cyanex-272 > PC-88A > DEHPA. Also, cyanex-272 was found to extract U(VI) more efficiently than TBP at 2M HNO₃. The effect of diluents on the extraction of U(VI) by cyanex-272 followed the order cyclohexane > n-dodecane > CCl₄ > benzene. The loading of U(VI) into cyanex-272/n-dodecane from 2M HNO₃ has shown that at saturation point, cyanex-272 was 78% loaded. No third phase was observed at the saturation level. The stripping of U(VI) from the loaded organic phase was not possible with water, it was poor with acetic acid and sodium acetate but quantitative with oxalic acid, ammonium carbonate and sodium carbonate.     

Selektive Amidspaltung bei Peptiden mit α,α-disubstituierten α-Aminosäuren

Selective Amide Cleavage in Peptides Containing α,α-Disubstituted α-Amino Acids A new synthesis of dipeptides with terminal α,α-disubstituted α-amino acids, using 2,2-disubtituted 3-amino-2H-azirines 1 as amino-acid equivalents, is demonstrated. The reaction of 1 with N-protected amino acids leads to the corresponding dipeptide amides in excellent yield. It is shown that the previously described selective hydrolysis (HCl, toluene, 80°, or HCl, MeCN/H₂O, 80°) of the terminal amide group results in an extensive epimerization of the second last amino acid. An acid-catalyzed enolization in the intermediate oxazole-5(4H)-ones is responsible for this loss of configurational integrity. In the present paper, a selective hydrolysis of the terminal amide group under very mild conditions is described: In 3_N HCl (THF/H₂O 1:1), the dipeptide N,N-dimethylamides or N-methytlanilides are hydrolized at 25–35° to the optically pure dipeptides in very good yield.     

Studies on Synthesis and Effect of Dopants on Conductivity and Morphology of Organically Soluble Poly(o-anisidine)

Synthesis of poly(o-anisidine) doped with various protonic acids by using ammonium persulphate as oxidizing agent were carried out in aqueous acid media. Influences of protonic acids on the physicochemical properties were investigated. The various process parameters were optimized to obtain poly(o-anisidine) in the conducting salt phase form. The results are discussed with references to different protonic acids. It was observed that poly(o-anisidine) is highly soluble in organic solvents, such as m-cresol and N-methyl pyrrolidinone (NMP). The polymers were characterized by UV-Visible, FTIR, SEM, XRD and conductivity measurements. A result shows that, different types of dopant acids HCl, H₂SO₄ and HClO₄ affect the morphology and electrical conductivity of the polymer. The electrical conductivity of the polymer follows the order HCl >H₂SO₄>HClO₄. Thus the effect of dopant ion type and the size of its negative ions influence the physico-chemical properties. UV-Vis absorption spectra shows peaks at 740–783 nm with shoulder at 380–420 nm as characteristic peaks for the emeraldine salt (ES) phase of poly(o-anisidine) POA. The FTIR spectra show a broad and intense band at ～2800–3001 cm^?1 and ～1159–1170 cm^?1 that account for the formation of ES phase of the polymer. The X-ray diffraction spectra show a characteristic peak at 20–30^o, 2θ range which reveals partial crystalline structure. The conductivity of the poly(o-anisidne) salt was found to be in the range of 10^?3 to 10^?2 S/cm. SEM studies of poly(o-anisidine) doped with HCl shows the continuous granular uniform morphology with sub-micrometer evenly distributed particles of size ～100–200 nm.     

Enolate Stabilization by Anion–π Interactions: Deuterium Exchange in Malonate Dilactones on π‐Acidic Surfaces

Of central importance in chemistry and biology, enolate chemistry is an attractive topic to elaborate on possible contributions of anion–π interactions to catalysis. To demonstrate the existence of such contributions, experimental evidence for the stabilization of not only anions but also anionic intermediates and transition states on π‐acidic aromatic surfaces is decisive. To tackle this challenge for enolate chemistry with maximal precision and minimal uncertainty, malonate dilactones are covalently positioned on the π‐acidic surface of naphthalenediimides (NDIs). Their presence is directly visible in the upfield shifts of the α‐protons in the ¹H NMR spectra. The reactivity of these protons on π‐acidic surfaces is measured by hydrogen–deuterium (H–D) exchange for 11 different examples, excluding controls. The velocity of H–D exchange increases with π acidity (NDI core substituents: SO₂R>SOR>H>OR>OR/NR₂>SR>NR₂). The H–D exchange kinetics vary with the structure of the enolate (malonates>methylmalonates, dilactones>dithiolactones). Moreover, they depend on the distance to the π surface (bridge length: 11–13 atoms). Most importantly, H–D exchange depends strongly on the chirality of the π surface (chiral sulfoxides as core substituents; the crystal structure of the enantiopure (R,R,P)‐macrocycle is reported). For maximal π acidity, transition‐state stabilizations up to ?18.8 kJ mol^?1 are obtained for H–D exchange. The Brønsted acidity of the enols increases strongly with π acidity of the aromatic surface, the lowest measured pK_a=10.9 calculates to a ΔpK_a=?5.5. Corresponding to the deprotonation of arginine residues in neutral water, considered as “impossible” in biology, the found enolate–π interactions are very important. The strong dependence of enolate stabilization on the unprecedented seven‐component π‐acidity gradient over almost 1 eV demonstrates quantitatively that such important anion–π activities can be expected only from strong enough π acids.     

Complexes cationiques η-1′,2,3-[(methylene-2γ-butyrolactone)-yl-3]-(η-cyclopentadienyl)carbonylnitrosyl molybdene: Synthese et etudes des additions nucleophiles stereoselectives

The decomposition of hydroxyethyl-, ethoxyethyl- and phenoxyethyl(aquo)cobaloximes in sulfuric acid/water mixtures to produce ethylene has been studied spectrophotometrically and manometrically. Definitive kinetic evidence for formation of an intermediate which is common to all three starting complexes and accumulates at acidities greater than 7.3 M H₂SO₄ has been obtained. A complete rate law which accounts for all of the ionizations of starting materials and intermediate has been derived and fit to the rate data. The rate-determining step for product formation is decomposition of the intermediate at all acidities: the intermediate accumulates in strong acid because of a shift in the equilibrium for its formation due to the reduced activity of water in strongly acidic media. Activation parameters for the decomposition of the intermediate, which may be formulated as an ethylene-cobaloxime(III) π-complex or as a σ-bonded ethyl carbonium ion, have been obtained. ¹H and ¹³C NMR observations of the intermediate and its deuterated analog (from 1,1,2,2-tetradeuterio-2-hydroxyethyl(aquo)cobaloxime) have led to the conclusion that it is probably a σ-bonded ethyl carbonium ion which may be stabilized by σ-π hyperconjugation.     

Solubility of YF<Subscript>3</Subscript>, CeF<Subscript>3</Subscript>, PrF<Subscript>3</Subscript>, NdF<Subscript>3</Subscript>, and DyF<Subscript>3</Subscript> in solutions containing sulfuric and phosphoric acids

The solubility of YF₃, CeF₃, PrF₃, NdF₃, and DyF₃ in solutions containing 0–4.496% mol/L (0–35 wt %) of H₂SO₄ and 0–27.6 g/L of H₃PO₄ (0–20 g/L of P₂O₅) at 20 °C was determined. Higher solubility in sulfuric acid solutions compared to that in hydrochloric and phosphoric acid solutions was attributed to the formation of fluorosulfate complexes M₂(SO₄)F₄(M = Y, Ce, Pr, Nd, Dy). The effect of minor concentrations of the phosphate ions on the solubility of YF₃, CeF₃, PrF₃, NdF₃, and DyF₃ in sulfuric acid solutions and the effect of fluoride ions on the recovery of lanthanides during sulfuric acid leaching from the phosphohemihydrate were discussed.     

Interaction parameters and (solid + liquid) equilibria calculation for KCl–H2O–HCl–C2H5OH,K2SO4–H2O–H2SO4 and K2SO4–H2O–C2H5OH mixed solvent-electrolyte systems

This work deals with the prediction and experimental measurements of the (solid + liquid) equilibrium (SLE) in acid medium for industrial purposes. Specific systems including KCl–ethanol–water–HCl and K₂SO₄–water–H₂SO₄ were analyzed. At first, a critical discussion of SLE calculations was given, based on the well-known UNIQUAC extended and LIQUAC models. Two new proposals were derived, considering the explicit necessity of a new reference state for SLE calculations for the studied (solvents + acid) mixtures. The solubility of KCl in water–ethanol–HCl mixed solvents was measured in the temperature range of 300.15 to 315.15 K using an analytical gravimetric method. These results combined with some other experimental data reported in the open literature let us to propose a set of parameters for the new models. They included the interaction parameters between ethanol and the H⁺ ion. The prediction capability of the new models, for calculations in acid medium, was illustrated. Experimentally, it was observed that the (K₂SO₄ + water + H₂SO₄) system presented the unusual behavior of increasing K₂SO₄ solubility with an increase in the sulfuric acid concentration. This was accurately predicted by the newly proposed models.     

Base hydrolysis of (αβ S)-(o-methoxy benzoato) (tetraethylenepentamine) cobalt(III) ion: A comparative study of the role of ion pairs and micelles

The kinetics of base hydrolysis of (αβ S)-(o -methoxy benzoato) (tetraethylenepentamine)cobalt(III) obeyed the rate law: k_obs = k_OH[OH^?], in the range 0.05 ? [OH^?]_T, mol dm^?3 ? 1.0, I = 1.0 mol dm^?3, and 20.0–40.0°C. At 25°C, k_OH = 13.4 ± 0.4 dm³ mol^?1 s^?1, ΔH^≠ = 93 ± 2 kJ mol^?1 and ΔS^≠ = 90 ± 5 JK^?1 mol^?1. Several anions of varying charge and basicity, CH₃CO₂^?, SO₃^2?, SO₄^2?, CO₃^2?, C₂O₄^2?, CH₂(CO₂)₂^2?, PO₄^3?, and citrate^3? had no effect on the rate while phthalate^2?, NTA^3?, EDTA^4?, and DTPA^5? accelerated the process via formation of the reactive ion pairs. The anionic (SDS), cationic (CTAB), and neutral (Triton X-100) micelles, however, retarded the reaction, the effect being in the order SDS> CTAB > Triton X-100. The importance of electrostatic and hydrophobic effects of the micelles on the selective partitioning of the reactants between the micellar and bulk aqueous pseudo-phases which control the rate are discussed. © 1994 John Wiley & Sons, Inc.     

Liquid-liquid extraction of molybdenum(VI) and uranium(VI) by LIX 622

The order of extraction of Mo(VI) from 1M acid solutions by 5% (v/v) LIX 622 (HL) in benzene is HCl>HNO₃>HClO₄>H₂SO₄, and extraction decreases with increasing concentration of HCl and H₂SO₄, and increases slightly with increasing concentration of HNO₃ and HClO₄. The extracted species is shown to be MoO₂L₂ as established by IR data of organic extracts and the extracted species in the solid form. Extraction is almost quantitative at and above 10% LIX 622, and is found to be independent of [Mo(VI)] in the range of 10^–4 to 10^–3 M. The diluents CCl₄, CHCl₃ and C₆H₆ are found to be superior to solvents of high dielectric constant for extraction of Mo(VI). Extraction of uranium(VI) by 10% (v/v) LIX 622 in benzene was found to increase with increasing equilibrium pH (3.0 to 6.0), and becomes quantitative at pH 5.9. Tributyl phosphate acts as a modifier up to 2% (v/v). Thorium(IV) is almost not extracted by LIX 622 or its mixture. Separation of Mo(VI) and U(VI) is feasible.     

Synthesis of Some Novel Phenyl Substituted Oxothiazolidin- 1’’,3’’,4’’-thiadiazolo-[3’,4’-b]thiazoline of 3β-Substituted Cholestane

Three title compounds 4a—4c have been synthesized by the cyclodehydration of 1’-benzylidine-4’-(3β-substituted-5α-cholestane-6-yl)thiosemicarbazones 2a—2c with thioglycolic acid followed by the treatment with cold conc. H2SO4 in dioxane. The compounds 2a—2c were prepared by condensation of 3β-substituted-5α-cholestan- 6-one-thiosemicarbazones 1a—1c with benzaldehyde. These thiosemicarbazones 1a—1c were obtained by the reaction of corresponding 3β-substituted-5α-cholestan-6-ones with thiosemicarbazide in the presence of few drops of conc. HCl in methanol. The structures of the products have been established on the basis of their elemental, analytical and spectral data.     

Kinetic study of the Ce(iii)- or Mn(ii)-catalyzed Belousov–Zhabotinsky reactions with mixed organic acid/ketone substrates

In a stirred batch reactor, the Ce(III)- or Mn(II)-catalyzed Belousov–Zhabotinsky reaction with mixed organic acid/ketone substrates exhibits oscillatory behavior. The organic acids studied here are: dl-mandelic acid (MDA), dl-4-bromomandelic acid (BMDA), and dl-4-hydroxymandelic acid (HMDA), and the ketones are: acetone (Me₂CO), methyl ethyl ketone (MeCOEt), diethyl ketone (Et₂CO), acetophenone (MeCOPh), and cyclohexanone ((CH₂)₅CO). The effects of bromate ion, organic acid, ketone, metal-ion catalyst, and sulfuric acid concentrations on the oscillatory patterns are investigated. Both conventional and stopped-flow methods are applied to study the kinetics of the oxidation reactions of the above organic acids by Ce(IV) or Mn(III) ion. The order of relative reactivities of the oxidation reactions of organic acids in 1 M H₂SO₄ is Mn(III)(SINGLEBOND)HMDA reaction>Ce(IV)(SINGLEBOND)HMDA reaction>Mn(III)(SINGLEBOND)BMDA, reaction>Mn(III)(SINGLEBOND)MDA reaction>Ce(IV)(SINGLEBOND)BMDA reaction>Ce(IV)(SINGLEBOND)MDA reaction. Spectrophotometric study of the bromination reactions of the above ketones shows that these reactions are zero-order with respect to bromine and first-order with respect to ketone and that ketone enolization is the rate-determining step. The order of relative rates of bromination or enolization reactions of ketones in 1 M H₂SO₄ is (CH₂)₅CO≫(MeCOEt, Et₂CO, Me₂CO)>MeCOPh. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet:30: 595–604, 1998     

A kinetic study of electron transfer from L-Ascorbic acid to sodium perborate and potassium peroxy disulphate in aqueous acid and micellar media

Kinetics of oxidation of L-ascorbic acid (H₂A) by sodium perborate (SPB) and peroxy disulphate (PDS) have been investigated in aqueous acid and micellar media. Reaction kinetics indicated first-order dependence on both |oxidant| and |H₂A|. Increase in ionic strength (μ) increased reaction rate only in H₂SO₄ media. Rate of SPB oxidation of H₂A has been accelerated by acidity in HNO₃ and HCl media while a decreasing trend is observed in HClO₄ and H₂SO₄ media. The results are interpreted by various theories of acidity functions. Reaction rate is enhanced by the addition of added |H₂O₂| indicating a H₂O₂ coordinated boron species to be active in the present system. In the absence of micelle, increase in |acid| altered the PDS(SINGLEBOND)H₂A reaction rate marginally (a very small positive effect with HClO₄ and negative effect with H₂SO₄). Most plausible mechanisms have been proposed on the basis of experimental results. Activation parameters evaluated for specific kinetic constants are in accord with outer sphere electron transfer mechanism. In SPB(SINGLEBOND)H₂A system, addition of anionic micelle (Sodium lauryl sulfate) increased the rate, stabilizing the cationic species in the transition state in all the acid media. Although rate of PDS oxidation of H₂A was catalyzed by TX and inhibited by SDS at critical micellar concentration (CMC) increase in |acid| (both HClO₄ and H₂SO₄) beyond 9.6 × 10⁻⁴ M decreased the rate of oxidation. This trend was explained due to the repulsive interaction of coanion, HA⁻, and negatively charged micellar species. © 1996 John Wiley & Sons, Inc.     

Extraction of some elements of the groups IV b and VI b with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) from aqueous mineral acid solutions

Solvent extraction of Cr(VI), Mo(VI), W(VI) and Hf(IV) with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) in methyl isobutylketone (MIBK), xylene and chloroform (CHCl₃) from mineral acid solutions was studied. Chromium(VI) is not extracted from any of the acids studied (HCl, H₂SO₄ and HClO₄). Molybdenum(VI) is quantitatively extracted by the reagent in xylene and CHCl₃ from HClO₄ and HNO₃ solutions. It is also extracted quantitatively by the reagent in MIBK from HCl, HNO₃ and H₂SO₄ solutions but the participation of the diluent as extractant is considerable. Tungsten(VI) is quantitatively extracted in xylene from 9M HClO₄ solution. MIBK used as diluent also affects its extraction with PMCP. Hafnium(IV) is not extracted from H₂SO₄ solutions while it extracts more than 99% at 3M HNO₃ and above. The extracted species likely are: MoO₂(PMCP)₂, WO₂(PMCP)₂ and Hf(PMCP)₄, respectively.     

Cationic polymerization of α,β-disubstituted olefins. IV. Stereospecific polymerization of propenyl alkyl ethers catalyzed by BF3·O(C2H5)2 and Al2(SO4)3–H2SO4 complex

The cis- and trans-propenyl alkyl ethers were polymerized by a homogeneous catalyst [BF₃·O(C₂H₅)₂] and a heterogeneous catalyst [Al₂(SO₄)₃–H₂SO₄ complex]. Methyl, ethyl, isopropyl, n-butyl and tert-butyl propenyl ethers were used as monomers. The steric structure of the polymers formed depended on the geometric structures of monomer and the polymerization conditions. In polymerizations with BF₃·O(C₂H₅)₂ at ?78°C., trans isomers produced crystalline polymers, but cis isomers formed amorphous ones except for tert-butyl propenyl ether. On the other hand, highly crystalline polymers were formed from cis isomers, but not from the trans isomers in the polymerization by Al₂(SO₄)₃–H₂SO₄ complex at 0°C. The x-ray diffraction patterns of the crystalline polymers obtained from the trans isomers were different from those produced from the cis isomers, except for poly(methyl propenyl ether). The reaction mechanism was discussed briefly on these basis of these results.