Chromium doped γ-Al2O3 powders. Features of the electrical double layer and state of the surface species

γ-Al₂O₃ samples, both pure and Cr doped, were prepared by heating at 470°C sol–gel precursors obtained by using aluminum tri-sec-butoxide [Al(OC₄H₉)₃] as the starting compound. The samples were characterised for phase composition (X-ray diffraction) and surface area (BET). Electrochemical determinations of the double layer reactivity of the pure and doped oxides were performed both by surface charge and by electrokinetic sonic amplitude (ESA) determinations. The interfacial electrostatic response is discussed and analysed also with reference to the sample surface state obtained by X-ray photoelectron spectroscopy (XPS).     

Environment-friendly synthesis of N-phenylpiperidine from aniline and 1,5-pentanediol over γ-Al2O3 catalyst

An efficient environment-friendly synthesis of N-phenylpiperidine was developed from aniline and 1,5-pentanediol over γ-Al2O3 catalyst under atmospheric pressure. The conversion of 1,5-pentanediol reached 97% and the selectivity for N-phenylpiperidine attained 94%. The structure of the catalyst was characterized by NH3-TPD and BET. The influences of calcination temperature of the catalyst and reaction temperature on activity and selectivity of the catalyst were investigated.     

Macroscopic and spectroscopic characterization of selenate, selenite, and chromate adsorption at the solid–water interface of γ-Al2O3

The interaction of selenate, selenite, and chromate with the hydrated surface of γ-Al₂O₃ was studied using a combination of macroscopic pH edge data, electrophoretic mobility measurements, and X-ray absorption spectroscopic analyses. The pH edge data show generally increased oxyanion adsorption with decreasing pH, and indicate ionic strength-(in)dependent adsorption of chromate and selenate across the pH range 4–9, and ionic strength-(in)dependent adsorption of selenite in this pH range. The adsorption of chromate peaks at pH 5.0, whereas for selenate and selenite no pH adsorption maxima are observed. Electrophoretic mobility measurements show that all three oxyanions decrease the zeta potential of γ-Al₂O₃ upon adsorption; however, only selenite decreased the pH_PZC of the γ-Al₂O₃ sorbent. EXAFS data indicate that selenite ions are coordinated in a bridging bidentate fashion to surface AlO₆ octahedra, whereas no second-neighbor Al scattering was observed for adsorbed selenate ions. Combined, the results presented here show that pH is a major factor in determining the extent of adsorption of selenate, selenite, and chromate on hydrated γ-Al₂O₃. The results point to substantial differences between these anions as to the mode of adsorption at the hydrated γ-Al₂O₃ surface, with selenate adsorbing as nonprotonated outer-sphere complexes, chromate forming a mixture of monoprotonated and nonprotonated outer-sphere adsorption complexes, and selenite coordinating as inner-sphere surface complexes in bridging configuration.     

Fabrication and characterization of γ-Al2O3–clay composite ultrafiltration membrane for the separation of electrolytes from its aqueous solution

In this paper, we have reported the preparation of low cost γ-Al₂O₃ membrane on a macroporous clay support by dip-coating method. For the synthesis of γ-Al₂O₃ top layer on the support, a stable boehmite sol is prepared using aluminium chloride salt as a starting material by sol–gel route. The structural properties of the composite membrane as well as γ-Al₂O₃ powder is carried out using scanning electron microscopy (SEM), X-ray diffraction (XRD), nitrogen adsorption–desorption isotherm data, Fourier transform infrared analysis (FTIR) and dynamic light scattering (DLS) analysis. The mean particle size of the boehmite sol used for coating is found to be 30.9 nm. The pore size distribution of the γ-Al₂O₃–clay composite membrane is found to be in the range of 5.4–13.6 nm. Separation performance of the membrane in terms of flux and rejection of single salts solution such as MgCl₂ and AlCl₃ as a function of pH, salt concentration and applied pressure is also studied. The rejection and flux behavior are found to be strongly dependent on electrostatic interaction between the charged molecules and γ-Al₂O₃–clay composite membrane. The intrinsic rejection has been determined by calculating the concentration at membrane surface (C_m) using Speigler–Kedem model. It is found that the observed rejection shows anomalous trend with increase in applied pressure and the intrinsic rejection increases with increase in applied pressure, a trend typical of the separation of electrolyte through charged membranes. At acidic pH, both the salt solution shows higher rejection. With increase in the salt concentration, observed rejection of salt decreases due to the enhanced concentration polarization. The maximum rejection of MgCl₂ and AlCl₃ is found to be 72% and 88%, respectively for salt concentration of 3000 ppm.     

Synthesis and ac susceptibility of YCa2Cu3O7−δ

The bulk superconducting YCa₂Cu₃O_7−δ compounds are prepared at an ordinary pressure of oxygen by conventional solid-state reaction method. The formation of sample is tested by means of XRD and is studied for their ac susceptibility below room temperature up to 77.5 K. The samples are found single-phase orthorhombic structure and found superconducting at 83.5 K. It is shown that the analysis is consistent with published data on YBa₂Cu₃O_7−δ oxide superconductor.     

Preparation of “pore-fill” type Pd–YSZ–γ-Al2O3 composite membrane supported on α-Al2O3 tube for hydrogen separation

Mesoporous YSZ–γ-Al₂O₃ membranes were coated on α-Al₂O₃ (Ø2 mm) tube by dipping the α-Al₂O₃ support tube into mixed sol consists of nano-size YSZ and bohemite particles followed by drying and calcination at 600 °C. Addition of bohemite in YSZ sol helped a good adhesion and uniform coating of the membrane film onto α-Al₂O₃ support. The quality of the mesoporous YSZ–γ-Al₂O₃ membranes was evaluated by the gas permeability experiments. The number of defects was minimized when the γ-Al₂O₃ content became more than 40%. Addition of γ-Al₂O₃ inhibited the crystal growth of YSZ, sintering shrinkage and distortion stress. Increase of calcination temperature and time results in the increase of pore size and N₂ permeance. A hydrogen perm-selective membrane was prepared by filling palladium into the nano-pores of YSZ–γ-Al₂O₃ layer by vacuum-assisted electroless plating. Crystal growth of palladium was observed by thermal annealing of the membrane at 600 °C for 40 h. The Pd–YSZ–γ-Al₂O₃ composite membrane revealed improved thermal stability allowing long-term operation at elevated temperature (>500 °C). This has been attributed to the improved fracture toughness of YSZ–γ-Al₂O₃ layer and matching of thermal expansion coefficient between palladium and YSZ. Although fracture of the membrane did not occur, decline of H₂ flux was observed when the membrane was exposed in 600 °C. This has been attributed to the agglomeration of palladium particles by crystal growth and dense packing into the pore networks of YSZ–γ-Al₂O₃ by elevation of temperature.     

Interaction between Two Similar Plane Parallel Double Layers for Al2(SO4)3 Type Asymmetric Electrolytes at Positive Surface Potential

The interaction between two similar plane double-layers for Al₂(SO₄)₃ type asymmetric electrolytes was investigated with the aid of λ parameter method. The interaction energies for the system at positive surface potential were expanded in the power series at low and high potential, respectively. The high potential formula can be applied to 0.2 ≤ y_e  < y ₀ ≤ 20. This almost covers with the bounds of all potential, and that the calculative method is relative simple. The accurate numeral results and V′?ξ_d curves were given for y ₀ ≤ 20. When y ₀ ≥ 5, V′ hardly change with y ₀. The interaction energies between two similar plane parallel double layers for the different type electrolytes at y ₀ = 1 were compared. The present results are also fit for Mg₃(PO₄)₂ type electrolytes at negative surface potential.     

二苯并噻吩和吲哚在NiMoS/γ-Al2O3上加氢脱硫和加氢脱氮反应的相互影响

在固定床高压微反装置上考察了预硫化型NiMoS/γ-Al2O3催化剂上二苯并噻吩（DBT）加氢脱硫（HDS）反应和吲哚加氢脱氮（HDN）反应之间的相互影响。结果表明,吲哚对DBT的加氢脱硫反应具有抑制作用,其中对加氢路径（HYD）比对氢解路径（DDS）的抑制作用强,温度升高后,吲哚的抑制作用减弱。吲哚对DBT加氢脱硫反应的抑制作用源于吲哚及其HDN反应的中间产物在活性位上的竞争吸附。DBT和原位生成的H2S促进了催化剂表面硫阴离子空穴（CUS）向B酸位的转化,从而提高1,2-二氢吲哚（HIN）分子中C(sp3)—N键的断裂能力,使得吲哚的转化率和产物中邻乙基苯胺（OEA）的相对含量增大。HDN活性相的形成虽然需要硫原子的参与,但是活性相的保持并不需要大量的硫原子,较高含量硫化物存在时加氢活性位减少,不利于脱氮反应。     

A Generalized Method for the Synthesis of Carbon-Encapsulated Fe3O4 Composites and Its Application in Water Treatment

In this paper, a simple and environmentally friendly method was developed for the preparation of highly stable C@Fe₃O₄ composites with controllable morphologies using sodium alginate as the carbon source and the easily obtained α-Fe₂O₃ as the precursors. The morphologies of the as-prepared C@Fe₃O₄ composites, inherited from their corresponding precursors of α-Fe₂O₃, survived from the annealing treatments, were characterized by the field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The C@Fe₃O₄ composites resisted to oxidation, acidification and aggregation, exhibiting porous structures and ferromagnetic properties at room temperature. Moreover, the adsorption performance of the C@Fe₃O₄ composites was evaluated by absorbing MB (methylene blue) in liquid environment. Experiments indicated that the C@Fe₃O₄ composites exhibited highly enhanced adsorption capacities and efficiencies as compared with their corresponding precursors of α-Fe₂O₃. This generalized method for the synthesis of C@Fe₃O₄ composites provides promising applications for the highly efficient removal of MB from industrial effluents.     

Pt LIII-edge XANES and EXAFS studies on γ-Al2O3 supported Pt catalysts

Pt L_III-edge XANES and EXAFS were employed to investigate the nature of Pt/γ-Al₂O₃, Pt−Sn/γ-Al₂O₃ and Pt−Fe/γ-Al₂O₃ catalysts. The results indicated that Pt species on these catalysts were all in the oxidized states before reduction, and in the metallic states after reduction. The dispersity of the Pt species on the catalysts was very high after reduction. The electronic properties of the highly dispersed Pt species were different from that of the bulk Pt in large crystallites. An interaction between Pt and the metal-oxide modified γ-Al₂O₃ support is proposed. The interaction improved the dispersity of the Pt species on the catalysts and is thought to be the reason for the enhanced activity and selectivity for dehydrogenation reactions over these catalysts.     

Synthesis of nanocrystalline γ-Al_2O_3 by sol-gel and precipitation methods for methanol dehydration to dimethyl ether

The capability of sol-gel and conventional precipitation techniques for the synthesis of nanocrystalline γ-alumina was investigated. These catalysts were used for vapor-phase dehydration of methanol to dimethyl ether in a fixed-bed reactor under the same operating conditions (T = 300 ?C, P = 1 bar, LHSV = 2.8, 11.7, 26.1 h?1) and characterized by means of N2 adsorption-desorption, NH3-TPD, XRD, TGA and SEM techniques. According to the experimental results, the catalysts prepared using sol-gel method in non-aqueous medium showed better performance compared with those prepared by other methods.     

IR-spectral investigation of the structure of glasses in the Fe2O3-V2O5 system

The structure of glasses in the Fe₂O₃-V₂O₅ system in the 0–50 mol% Fe₂O₃ range is studied by IR-spectroscopy. It is found that the introduction of Fe₂O₃ favours the transformation of the VO₅-groups into VO₄ ones. This effect may be shown with the aid of IR-spectra, owing to the fact that these glasses are characterized by two high-frequency bands at 1020 and 930 cm^–1. The first is determined by the vibrations of the short V=O nonbridging bonds in the VO₅-groups, while the second is assigned to the vibrations of the V—O-bonds in deformed VO₄-tetrahedra.

---

IR-spektroskopische Strukturuntersuchung von Gläsern des Systems Fe₂O₃-V₂O₅

Zusammenfassung Die Struktur von Gläsern des Systems Fe₂O₃-V₂O₅ in dem Bereich von 0–50 Molprozent Fe₂O₃ wurde mit Hilfe der IR-Spektroskopie untersucht. Zusatz von Fe₂O₃ begünstigt die Umwandlung der VO₅- in VO₄-Gruppen. Das kann in den IR-Spektren durch zwei Banden bei 1020 und 930 cm^–1 festgestellt werden. Die erste wird durch Schwingungen der kurzen V=O-Nichtbrücken-bindungen in den VO₅-Gruppen verursacht, die zweite wird auf Schwingungen der V—O-Bindungen in dem deformierten VO₄-Tetraeder zurückgeführt.

     

ZrO2表面B2O3的分散及其作用状态

用XPS、FT IR和FT Raman等技术研究了ZrO2表面B2O3的分散及其作用状态,测定了B2O3在ZrO2表面的分散阈值.结果表明：B2O3在ZrO2表面可以三配位BO3和四配位BO4结构单元存在;载体ZrO2的预焙烧温度和硼含量对B2O3的分散及作用状态有较大影响,并改变BO3与BO4结构单元之间的比例.实验测得B2O3在ZrO2载体上的单层分散阈值为0.05 gB2O3/gZrO2（或B2O3的质量分数w=4.76％）,处在此单层中的硼原子以BO4为结构单元直接与ZrO2表面相作用.只有当B2O3的负载量超过此（单层）分散阈值时, BO3结构单元才会形成.     

Ternary [Al2O3–electrolyte–Cu] species: EPR spectroscopy and surface complexation modeling

Cu²⁺ binding on γ-Al₂O₃ is modulated by common electrolyte ions such as Mg²⁺, , and in a complex manner: (a) At high concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ is inhibited. This is partially due to bulk ionic strength effects and, mostly, due to direct competition between Mg²⁺ and Cu²⁺ ions for the SO⁻ surface sites of γ-Al₂O₃. (b) At low concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ can be enhanced. This is due to synergistic coadsorption of Cu²⁺ and electrolyte anions, and _. This results in the formation of ternary surface species (SOH₂SO₄Cu)⁺, (SOH₂PO₄Cu), and (SOH₂HPO₄Cu)⁺ which enhance Cu²⁺ uptake at pH < 6. The effect of phosphate ions may be particularly strong resulting in a 100% Cu uptake by the oxide surface. (c) EPR spectroscopy shows that at pH  pH_PZC, Cu²⁺ coordinates to one SO⁻ group. Phosphate anions form stronger, binary or ternary, surface species than sulfate anions. At pH  pH_PZC Cu²⁺ may coordinate to two SO⁻ groups. At pH  pH_PZC electrolyte ions and are bridging one O-atom from the γ-Al₂O₃ surface and one Cu²⁺ ion forming ternary [γ-Al₂O₃/elecrolyte/Cu²⁺] species.     

Pulsed laser-induced oxygen deficiency at TiO2 surface: Anomalous structure and electrical transport properties

We have studied pulsed laser-induced oxygen deficiencies at rutile TiO₂ surfaces. The crystal surface was successfully reduced by excimer laser irradiation, and an oxygen-deficient TiO_2−δ layer with 160 nm thickness was formed by means of ArF laser irradiation at 140 mJ/cm² for 2000 pulses. The TiO_2−δ layer fundamentally maintained a rutile structure, though this structure was distorted by many stacking faults caused by the large oxygen deficiency. The electrical resistivity of the obtained TiO_2−δ layer exhibited unconventional metallic behavior with hysteresis. A metal–insulator transition occurred at 42 K, and the electrical resistivity exceeded 10⁴ Ω cm below 42 K. This metal–insulator transition could be caused by bipolaronic ordering derived from Ti–Ti pairings that formed along the stacking faults. The constant magnetization behavior observed below 42 K is consistent with the bipolaronic scenario that has been observed previously for Ti₄O₇. These peculiar electrical properties are strongly linked to the oxygen-deficient crystal structure, which contains many stacking faults formed by instantaneous heating during excimer laser irradiation.     

ZrO_2-Al_2O_3复合氧化物的合成及其性能研究

采用表面活性剂改性的沉淀法合成了系列掺杂钇、镧、钡的氧化锆铝复合氧化物。通过XRD、XRF、低温N2吸附和CO脉冲化学吸附等手段考察了表面活性剂、助剂、焙烧温度对复合材料结构、孔结构以及负载0.5%铑催化剂的分散性能等的影响。研究表明:与采用常规沉淀法合成的氧化锆铝复合氧化物相比,添加表面活性剂合成的样品具有更大的比表面积、孔容和适合的孔径分布。分别或同时掺杂La、Ba、Y合成的氧化锆铝复合氧化物都能抑制氧化铝的α相变,提高复合材料和催化剂表面金属Rh的高温抗烧结能力,特别是同时掺杂La、Ba、Y合成的Rh/LBYZA样品经1100℃4h焙烧后仍有17.82%的金属分散度。以LBYZA为载体制备的新鲜催化剂(600℃4h焙烧样品)在CO选择还原NO反应中NO和CO的起燃温度分别为240、243℃,完全燃烧温度分别为273、280℃,表现出较高的催化活性。     

超级铝热剂Al/Fe2O3的制备、表征及对环三亚甲基三硝胺热分解的影响

采用水热法制备了中空短棒状纳米Fe2O3,并用超声分散法将其与纳米Al颗粒复合为单金属氧化基超级铝热剂.利用X射线粉末衍射(XRD)、傅里叶变换红外(FTIR)光谱、扫描电镜及能量散射光谱仪(SEM-EDS)对样品进行表征.并运用差示扫描量热法(DSC)对比研究了超级铝热剂Al/Fe2O3、Al粉和纳米Fe2O3对环三亚甲基三硝胺(RDX)热分解特性的影响.结果表明:超级铝热剂的加入改变了RDX的热分解过程,并加剧了RDX的二次气相反应;随着超级铝热剂含量的增加,RDX的分解峰峰形发生了明显的改变;Al/Fe2O3、Al粉和Fe2O3对RDX热分解的作用主要表现为二次分解峰逐渐明显且峰温降低.     

High-pressure preparation, crystal structure, and properties of the new rare-earth oxoborate β-Dy2B4O9

In this work we report about a new rare-earth oxoborate β-Dy₂B₄O₉ synthesized under high-pressure/high-temperature conditions from Dy₂O₃ and boron oxide B₂O₃ in a B₂O₃/Na₂O₂ flux with a walker-type multianvil apparatus at 8 GPa and 1000°C. Single crystal X-ray structure determination of β-Dy₂B₄O₉ revealed: , a=616.2(1) pm, b=642.8(1) pm, c=748.5(1) pm, α=102.54(1)°, β=97.08(1)°, γ=102.45(1)°, Z=2, R1=0.0151, wR₂=0.0475 (all data). The compound exhibits a new structure type which is built up from bands of linked BO₃- (Δ) and tetrahedral BO₄-groups (□). The Dy³⁺-cations are positioned in the voids between the bands. According to the conception of fundamental building blocks β-Dy₂B₄O₉ can be classified with the notation 2Δ6□:Δ3□=4□=3□Δ. Furthermore we report about temperature-resolved in situ powder diffraction measurements and IR-spectroscopic investigations on β-Dy₂B₄O₉.     

TPD study of NH3 adsorption/desorption on the surface of V/Ti, V/Al based catalysts for selective catalytic reduction of NOx by ammonia 1. TPD test of γ-Al2O3, TiO2 (anatase) and alumina-supported vanadia catalysts

The effect of temperature on the adsorption/desorption of ammonia from the air mixture on the surface of γ-Al₂O₃, TiO₂ (anatase) and alumina-supported vanadia catalyst samples has been investigated using temperature-programmed desorption (TPD). When the vanadia loading was increased, the fraction of the acid sites providing the NH₃ adsorption in the high-temperature state decreased. At the same time, the fraction of the medium temperature state significantly increased.     

The Thermal Properties and Firing Characteristics of Zr/KClO4 Priming Compositions Containing Graphite,Fe2O3 and Al2O3 additives

Thermal decomposition of Zr/KClO₄ priming compositions containing different concentration of additives, such as graphite, Fe₂O₃ and Al₂O₃ have been studied by DSC/TG techniques. The firing characteristics of these primer mixtures have also been examined by Bruceton test and by adiabatic calorimeter. The results of these experiments suggest that strong interaction has been occurred between KClO₄ and Fe₂O₃ in the solid state. This revised version was published online in July 2006 with corrections to the Cover Date.