A Study on the Interaction of the DAS-K with Bovine Serum Albumin by On-line Ultrafiltration and Chemiluminescence

Potassium dehydroandrographolide succinate （DAS-K） has antibacterial and antiviral effects. It has been used widely for the treatment of virus pneumonia, malaria and respiratory infections. In this work, a novel flow-injection chemiluminescence （CL） method for the determination of DAS-K was proposed. The method is based on the reaction between DAS-K and hexacyanoferrate（III） in alkaline solution to give weak CL signal, which is enhanced by rhodamine B. The experimental conditions for the CL reaction were optimized and the possible reaction mechanism was discussed. Under the optimum conditions, the concentration of DAS-K is proportional to the CL intensity in the range of 0.1-80 μmol·L^-1 with a detection limit of 0.05 μmol·L^-1. The interaction of the DAS-K with bovine serum albumin by on-line ultrafiltration and flow-injection chemiluminescence was studied. The concentrations of unbound DAS-K from ultra filter tube were determined by the flow-injection CL method. The binding parameters were estimated by the Scatchard plot and Klotz plot. The proposed system proved that FIA-CL coupled with on-line ultrafiltration sampling was a fast and simple technique for the study of drug-protein interaction.     

Study on Preconcentration of Trace Copper Using Microcrystalline Triphenylmethane Loaded with Malachite Green

The paper describes a novel method for copper preconcentration using microcrystalline triphenylmethane loaded with malachite green prior to the determination by the flame atomic absorption spectrometry （FAAS）. Under the optimum conditions, Cu（Ⅱ） can be totally adsorbed on the surface of microcrystalline triphenylmethane, and completely separated from Pb（Ⅱ）, Cd（Ⅱ）, Co（Ⅱ）, Cr（Ⅲ）, Ni（Ⅱ）, Mn（Ⅱ）, Fe（Ⅲ） and Al（Ⅲ） by controlling acidity. The preconcentration factor of this proposed method is 200. The recovery is in a range of 97.5%-105%. The relative standard deviation （RSD） is not beyond 3.0%. The proposed method has been successfully applied to the determination of trace copper in various water samples with satisfactory results.     

Synthesis of Ruthenium-Graphene Quantum Dots Artificial Oxidase and Its Application in Colorimetric Detection of Phoxim in Carrots北大核心CSCD

The histidine functionalized graphene quantum dots（His-GQDs）react with ruthenium trichloride to form a stable ruthenium complex. This complex is treated in a N2 atmosphere at 600 ℃ for 1 h to obtain a ruthenium-graphene quantum dot composite （Ru-His-GQD）. The results of scanning electron microscopy （SEM）and transmission electron microscopy（TEM）analysis demonstrate that Ru-His-GOD has one three-dimensional structure. The diameter of ruthenium nanoparticles is between 40 and 60 nm. Ru-His-GQD is rich in functional groups and has high oxidase-like activity. Based on Ru-His-GQD catalyzed oxidation of 3,3′,5,5′-tetramethylbenzidine（TMB）to produce blue compounds,a photometric method for the determination of phoxim in carrots is established. Phoxim can inhibit the activity of Ru-His-GQD oxidase,resulting in a decrease in the absorbance of the blue compound. When the concentration of phoxim is between 30～240 μg/ L,the absorbance of the oxidation product of TMB at 652 nm decreases linearly with the increase of phoxim concentration. The detection limit of the method reaches 7. 33 μg/L（S/N=3）,and the sensitivity is higher than those in literature. It has been successfully applied to the detection of phoxim in carrots. © 2022, Science Press (China). All rights reserved.     

A novel method for the spectrophotometric determination of cefradine by using sodium nitroprusside as chromogenic reagent

A novel method is developed for the determination of cefradine by using sodium nitroprusside as chromogenic reagent. The experiment indicates that a russety product is formed by the reaction of cefradine with sodium nitroprusside in basic solution, and the maximum absorption wavelength （λmax） of russety product is 505 rim. And the sensitization of tetradecyl benzyl dimethyl ammonium chloride for the reaction of cefradine with sodium nitroprusside is remarkable, The apparent molar absorption coefficient （5505） is 2.81 × 103 L/mol cm. The linear equation isA = 0.0657 ＋ 0.00804C （μg/mL） in the range of 1.50-55.0μg/mL of cefradine with a correlation coefficient r = 0.9992, and the detection limit is 1.38 p,g/mL. This method has been applied to determine cefradine in capsule and tablet samples.     

Electrochemical Study on the Interaction of Protein with Bromothymol Blue and Its Analytical Application

The interaction of bromothymol blue（BB） with human serum albumin（HSA） was studied by electrochemical techniques and a sensitive method for proteins assay was developed. When BB interacted with HSA, the voltammetric peak current value of BB decreased linearly with the concentration of HSA in a range of 1.0--40.0 mg/L, and the peak potential shifted negatively. Based on the results, a sensitive assay method for proteins, such as HSA, bovine serum albumin（BSA）, and egg albumin etc. was established. This method was further applied to determining the HSA in healthy human blood samples, and the results are not significantly different from those obtained by the classic Coomassie Brilliant Blue G-250 spectrophotometic method. The detecting conditions of this method were optimized and the interaction mechanism was discussed. The results show that the electrochemical parameters（formal potential E^0, standard rate constant of the electrode reaction ks, parameter of kinetic nα） of BB have no obvious changes before and after the interaction, which indicate that BB can interact with HSA, forming an electrochemical non-active complex. The equilibrium constant（βs） and the binding ratio（m） for this complex were calculated. The m is 4 and βs is 1.41 × 10^19. This method is fast, simple, highly sensitive, and has good selectivity, which can be used in clinical measurements.     

STUDY ON THE DETERMINATION OF TRACE Fe（III） BY THIN LAYER RESIN PHASE SPECTROPHOTOMETRY

A method to determine Fe（Ⅲ） by thin layer resin phase spectrophotometry has been developed in this paper. The colored complex formed by Fe（Ⅲ） and 1,2-benzendiol is concentrated on the 717^# resin, then Fe（Ⅲ） can be determined directly by making thin layer. The method is sensitive with a apparent molar absorption of 4.8×10^4L/mol.cm, which is 16 times higher than that of liquid phase spectrophotornetry, most coexisting ions do not influence the determination. The detection limit for Fe（Ⅲ） is 1.47μg/L with the precision of 3.3% [n=6, 7μg/50mL Fe（Ⅲ）]. The calibration curve is linear in the range of 0-25μg/50mL. The preposed method was applied to the determination of Fe（Ⅲ） in water sample with satisfactory results.     

Determination of Critical Parameters of Carbon Dioxide ＋ Butyraldehyde System with Different Compositions

Supercritical carbon dioxide（SC-CO2 ） is considered in green chemistry as a substitute for conventional solvents in chemical reactions due to its environmentally benign character. Recently we have reported the homogeneous hydroformylation of propylene in supercritical carbon dioxide（ SC-CO2 ） , which is an example of this kind of application of carbon dioxide. The determination for the critical parameters of carbon dioxide ＋ butyraldehyde mixtures is necessary for this reaction design which is the focus of the present paper. The critical parameters of the binary systems were determined via the static visual method at a constant volume with the molar fraction of butyraldehyde ranging from 1.0% to 2. 2% and the pressure ranging from 5 to 10 MPa. The experimental results show that the critical pressure and temperature increased with increasing the molar fraction of butyraldehyde. The bubble（dew） temperatures and the bubble （dew） pressures for the binary systems were also determined experimentally. The p-T Figures at different compositions of the binary systems were described. In addition, the critical compressibility factors Zc of the binary systems at different concentrations of n-butyraldehyde were calculated. It was found that the critical compressibility factor values of the binary systems decreased with increasing the molar fraction of n-butyraldehyde in the experimental range.     

Preparation and characterization of m PEG grafted chitosan micelles as 5-fluorouracil carriers for effective anti-tumor activity

The objective of this study was to investigate the potential of methoxy polyethylene glycol（m PEG）grafted chitosan（m PEG-g-CS） to be used as a drug carrier. m PEG-g-CS was successfully synthesized by one-step method with formaldehyde. The substitution degree of m PEG on chitosan was calculated by elemental analysis and was found to be（3.23 0.25）%. m PEG-g-CS self-assembled micelles were prepared by ultrasonic method with the controlled size of 178.5–195.1 nm and spherical morphology. Stable dispersion of the micelles was formed with the zeta potential of 2.3–30.2 m V. 5-Fluorouracil（5-FU）, an anticancer chemotherapy drug, was used as a model drug to evaluate the efficiency of the new drug delivery carrier. The loading efficiency of 5-FU was（4.01 0.03）%, and the drug-loaded m PEG-g-CS self-assembled micelle showed a controlled-release effect. In summary, the m PEG-g-CS self-assembled micelle is proved to be a promising carrier with controlled particle size and controlled-release effect. Therefore, it has great potential for the application as 5-FU carriers for effective anti-tumor activity.     

Design and performance of air flow-assisted ionization imaging mass spectrometry system

The imaging mass spectrometry（IMS） technology has experienced a rapid development in recent years.A new IMS technology which is based on air flow assisted ionization（AFAI） was reported.It allows for the convenient pretreatment of the samples and can image a large area of sample in a single measurement with high sensitivity.The AFAI in DESI mode was used as the ion source in this paper.The new IMS method is named AFADESI-IMS.The adoption of assisted air flow makes the sample pretreatment easy and convenient.An optimization of the distance between the ion transport tube and MS orifice increases the sensitivity of the system.For data processing,a program based on MATLAB with the function of numerical analysis was developed.A theoretical imaging resolution of a few hundred microns can be achieved.The composite AFAI-IMS images of different target analytes were imaged with high sensitivity.A typical AFAI-IMS image of the whole-body section of a rat was obtained in a single analytical measurement.The ability to image a large area for relevant samples in a single measurement with high sensitivity and repeatability is a significant advantage.The method has enormous potentials in the MS imaging of large and complicated samples.     

α-Oxoketene dithioacetal mediated aromatic annulation: highly efficient and concise synthetic routes to potentially carcinogenic polycyclic aromatic hydrocarbons

Highly efficient regiospecific routes to potentially carcinogenic polycyclic aromatic hydrocarbons such as substituted benzo[c]phenanthrenes, benzo[c]fluorenes, 16,17-dihydro-11-methyl-15[H]cyclopenta[a]phenanthrene, 5-methyl-7,8,9,10-tetrahydrochrysene and 1,4-dimethylphenanthrene have been developed. The overall strategy involves our aromatic annulation protocol through base induced conjugate addition-elimination on the cyclic and acyclic α-oxoketene dithioacetals with the appropriate arylacetonitriles followed by acid induced cyclodehydration of the resulting conjugate adducts. Subsequent reductive dethiomethylation (Raney Ni) and dehydrogenation (DDQ) of the cyclized products affords the methyl substituted PAHs in high yields.     

m-CPBA/TFA: an efficient nonmetallic reagent for oxidative coupling of 1,2-diarylethylenes

A mild synthesis of a series of phenanthrenes with different substituents on the phenanthrene ring is described. The method involves intramolecular oxidative coupling of a variety of 1,2-diarylethylene derivatives in the presence of m-chloroperoxybenzoic acid (m-CPBA) in trifluoroacetic acid (TFA) to yield phenanthrenes in high yields. The present approach solves a key step for the synthesis of polycyclic structures related to an alkaloid tylophorine.     

Nanowires of metal-organic complex by photocrystallization: a system to achieve addressable electrically bistable devices and memory elements

A new method has been achieved to form a Cu:benzoquinone derivative (DDQ) charge-transfer complex by the photoexcitation of [Cu(DDQ)2(CH 3COO)2] ( 1) that has been synthesized by the reaction of DDQ and hydrated cupric acetate in acetonitrile. Photoexcitation of coordinated complex 1 leads to the formation of charge-transfer complex Cu2+(DDQ(.-)2 ( 2). The charge transfer complex 2, when spun on solid substrates, forms nanowires. Sandwich structures of 2 exhibit electrical bistability associated with memory phenomenon. Read-only and random-access memory phenomena are evidenced in nanowires of 2 providing a route to attend the issues pertaining to the addressibility of organic memory devices.     

Spectrophotometric study of the reaction mechanism between DDQ as pi-acceptor and potassium iodate and flucloxacillin and dicloxacillin drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of beta-lactam drugs, flucloxacillin (Fluclox) and dicloxacillin (Diclox), in pure and in different pharmaceutical preparations. The charge transfer (CT) reactions between Fluclox and Diclox as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and potassium iodate via oxidation reduction reaction where the highly coloured complex species or the liberated iodine have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer's law is obeyed over the concentration range of 2-450 microg ml(-1) for Fluclox and 10-450 microg ml(-1) for Diclox using DDQ reagent and at 50-550 microg ml(-1) for Fluclox and 50-560 microg ml(-1) for Diclox using iodate method, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 6-450 and 15-450 microg ml(-1) for Fluclox and Diclox using DDQ, respectively, and 65-550 and 63-560 microg ml(-1) for Fluclox and Diclox using iodine, respectively. The Sandell sensitivity is found to be 0.018 and 0.011 microg cm(-2) for DDQ method and 0.013 and 0.011 microg cm(-2) for iodate method for Fluclox and Diclox, respectively, which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.01-0.80 and 0.07-0.98) and relative standard deviation (R.S.D.=0.13-0.44 and 0.11-0.82%) (n=5) for DDQ and iodate methods, respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between-day precision of percent recovery of 99.87-100.2 and 99.90-100% for Fluclox and Diclox by DDQ method and 99.88-100.1 and 99.30-100.2% for Fluclox and Diclox by iodate method, respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of Fluclox and Diclox in raw materials and in pharmaceutical preparations.     

Iron(III) Chloride Catalyzed Oxidative Coupling Reaction of 1,2‐Diarylethylene Derivatives

A nontoxic FeCl₃ catalyzed intramolecular oxidative coupling reaction was developed for mild synthesis of a series of phenanthrenes with different substituents. The method involves cross dehydrogenative coupling of a variety of 1,2‐diarylethylene derivatives with di‐tert‐butylperoxide (DTBP) as a sole oxidant at room temperature in CH₂Cl₂/TFA (9:1 V/V) to yield phenanthrenes in good to excellent yields.     

Spectrophotometric study of the reaction mechanism between DDQ Pi- and iodine sigma-acceptors and chloroquine and pyrimethamine drugs and their determination in pure and in dosage forms

Two simple and accurate spectrophotometric methods are presented for the determination of anti-malarial drugs, chloroquine phosphate (CQP) and pyrimethamine (PYM), in pure and in different pharmaceutical preparations. The charge transphere (CT) reactions between CQP and PYM as electron donors and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) pi-acceptor and iodine sigma-acceptor reagents to give highly coloured complex species have been spectrophotometrically studied. The optimum experimental conditions have been studied carefully. Beer' law is obeyed over the concentration range of 1.0-15 microg ml(-1) for CQP and 1.0-40 microg ml(-1) for PYM using I(2) and at 5.0-53 microg ml(-1) for CQP and 1.0-46 microg ml(-1) for PYM using DDQ reagents, respectively. For more accurate results, Ringbom optimum concentration range is calculated and found to be 10-53 and 8-46 microg ml(-1) for CQP and PYM using DDQ, respectively and 5-15 and 8-40 microg ml(-1) for CQP and PYM using iodine, respectively. The Sandell sensitivity is found to be 0.038 and 0.046 g cm(-2) for DDQ method and 0.0078 and 0.056 g cm(-2) for I(2) method for CQP and PYM, respectively which indicates the high sensitivity of both methods. Standard deviation (S.D.=0.012-0.014 and 0.013-0.015) and relative standard deviation (R.S.D.=0.09-1.4 and 1.3-1.5%) (n=5) for DDQ and I(2) methods respectively, refer to the high accuracy and precision of the proposed methods. These results are also confirmed by between day precision of percent recovery of 99-100.6%, and 98-101% for CQP and PYM by DDQ method and 99-102% and 99.2-101.4% for CQP and PYM by I(2) method respectively. These data are comparable to those obtained by British and American pharmacopoeias assay for the determination of CQP and PYM in raw materials and in pharmaceutical preparations.     

Selective palladium-catalyzed cocyclotrimerization of arynes with dimethyl acetylenedicarboxylate: A versatile method for the synthesis of polycyclic aromatic hydrocarbons

Benzyne (1a) and the substituted derivatives 4,5-difluorobenzyne (1b) and 3-methoxybenzyne (2) undergo chemoselective palladium-catalyzed [2 + 2 + 2]-cocyclotrimerization with dimethyl acetylenedicarboxylate (DMAD) to afford the corresponding phenanthrenes and/or naphthalenes. The major products are phenanthrenes if Pd(PPh(3))(4) is used as the catalyst, naphthalenes if Pd(2)(dba)(3) is used. When the method is applied to polycyclic arynes 3-6, which are generated from the corresponding o-trimethylsilylaryl triflates, the same reactivity pattern is observed: the reaction can be selectively directed either toward the cocyclization of one molecule of aryne and two molecules of alkyne or to the reaction of two molecules of aryne with one molecule of alkyne, by appropriate choice of the palladium catalyst. The synthesis of polycyclic aromatic compounds 33-39 using this methodology is reported.     

Spectrophotometric Assay of Certain Cardiovascular Drugs Through Charge Transfer Reactions

Abstract

Charge transfer reaction is described for the assay of certain cardiovascular drugs; carbochromen hydrochloride, verapamil hydrochloride, acebutolol hydrochloride, carazolol and propranolol hydrochloride. the three acceptors, p-chloranilic acid (p-CA), dichlorophenyl-indophenol (DCPIP) and 2,3-dichloro 5,6-dicyano p-benzoquinone (DDQ) have been used to carry out such assay. the reaction is based on the proton transfer from the p-CA to the drug base or electron transfer from the drug base to either DCPIP or DDQ and the subsequent possible formation of resonance hybrids of charge transfer complexes. Optimization of the reaction conditions has been investigated. Obediance to Beer's law permitted the assay of these drugs in their dosage form. Calculating log ε for different chromogens, the method sensitivity is decreasing in order of using DCPIP, DDQ & p-CA. the method has been compared with the traditional U.V. absorbance spectrophotometric method and found to be of equal accuracy (t-test) and equal reproducibility)(F-test).     

Effect of solvent on the dehydrogenation of poly(1,3‐cyclohexadiene): Formation and characteristics of benzoquinone–aromatic hydrocarbon charge‐transfer complexes

The effect of solvent on the dehydrogenation of poly(1,3‐cyclohexadiene) (PCHD) with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) [or 2,3,5,6‐tetrachloro‐1,4‐(p‐)‐benzoquinone (TCQ)] was examined to improve the reactivity of benzoquinones for this dehydrogenation reaction. The dehydrogenation of PCHD with DDQ (or TCQ) was strongly affected by the type of solvent, and aromatic hydrocarbon based solvents were appropriate for this dehydrogenation reaction. A charge‐transfer complex between DDQ (or TCQ) and aromatic hydrocarbons was formed in the reaction mixture, and the reactivity of the complex was much higher than that of free DDQ (or TCQ). The formation of a DDQ–aromatic hydrocarbon complex, which has a large diamagnetic shift of the ¹³C NMR signals with respect to DDQ, was the primary factor for improvement of the reactivity of DDQ. For the TCQ–aromatic hydrocarbon complex, the existence of an electron‐withdrawing group on the aromatic hydrocarbon was the major factor for improvement of the reactivity of TCQ. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 342–350, 2010     

Straightforward synthesis of phenanthrenes from styrenes and arenes

Semi-one-pot synthesis of phenanthrenes from styrenes and arenes was developed through cross-dehydrogenative coupling. A sequence of Heck-type coupling and photo-cyclization were involved and a variety of functionalities were tolerated. This method provides an effective and practical protocol towards the synthesis of substituted phenanthrenes.