Active-passive vibration absorber of beam-cart-seesaw system with piezoelectric transducers

In contrast with fully controllable systems, a super articulated mechanical system (SAMS) is a controlled underactuated mechanical system in which the dimensions of the configuration space exceed the dimensions of the control input space. The objectives of the research are to develop a novel SAMS model which is called beam-cart-seesaw system, and renovate a novel approach for achieving a high performance active-passive piezoelectric vibration absorber for such system. The system consists of two mobile carts, which are coupled via rack and pinion mechanics to two parallel tracks mounted on pneumatic rodless cylinders. One cart carries an elastic beam, and the other cart acts as a counterbalance. One adjustable counterweight mass is also installed underneath the seesaw to serve as a passive damping mechanism to absorb impact and shock energy. The motion and control of a Bernoulli-Euler beam subjected to the modified cart/seesaw system are analyzed first. Moreover, gray relational grade is utilized to investigate the sensitivity of tuning the active proportional-integral-derivative (PID) controller to achieve desired vibration suppression performance. Consequently, it is shown that the active-passive vibration absorber can not only provide passive damping, but can also enhance the active action authority. The proposed software/hardware platform can also be profitable for the standardization of laboratory equipment, as well as for the development of entertainment tools.     

基于模糊控制的 VSVPWM 中点电位平衡策略

针对中点钳位型(NPC)三电平逆变器存在的直流侧中点电位不平衡问题,提出了一种基于模糊控制 的中点电位平衡策略。该策略重新定义了虚拟空间矢量,使虚拟小矢量不引起中点电位波动,并在虚拟中矢量中 引入了对中点电位不平衡有抑制作用的控制因子 Q。同时,设计了由模糊控制器 A 和 B 构成的组合模糊控制器, 该控制器能够依据中点电位偏移情况调整控制因子 Q,实现对中点电位的闭环控制。仿真和实验结果表明,采用 该策略的 NPC 型三电平逆变器中点电位不平衡问题能得到有效改善。     

Experimental evaluation of a piezoelectric vibration absorber using a simplified fuzzy controller in a cantilever beam

This study presents a novel resonant fuzzy logic controller (FLC) to minimize structural vibration using collocated piezoelectric actuator/sensor pairs. The proposed fuzzy controller increases the damping of the structures to minimize certain resonant responses. The vibration absorber is first experimentally examined by a cantilever beam test bed for impulse and near-resonant excitation cases. Moreover, the effectiveness of the new fuzzy control design to a state-of-the-art control scheme is compared through the experimental studies. The experimental results indicate the proposed controller is highly promising for this application field. Our results further demonstrate that the fuzzy approach is much better than traditional control methods. In summary, a novel vibration absorption scheme using fuzzy logic has been demonstrated to significantly enhance the performance of a flexible structure with resonant response.     

LMI-based output feedback fuzzy control of chaotic system with uncertainties

This paper studies the robust fuzzy control for nonlinear chaotic system in the presence of parametric uncertainties. An uncertain Takagi--Sugeno (T--S) fuzzy model is employed for fuzzy modelling of an unknown chaotic system. A sufficient condition formulated in terms of linear matrix inequality (LMI) for the existence of fuzzy controller is obtained. Then the output feedback fuzzy-model-based regulator derived from the LMI solutions can guarantee the stability of the closed-loop overall fuzzy system. The T--S fuzzy model ofthe chaotic Chen system is developed as an example for illustration. The effectiveness of the proposed controller design methodology is finally demonstrated through computer simulations on the uncertain Chen chaotic system.     

Vibration suppression control of smart piezoelectric rotating truss structure by parallel neuro-fuzzy control with genetic algorithm tuning

The main goal of this paper is to develop a novel approach for vibration control on a piezoelectric rotating truss structure. This study will analyze the dynamics and control of a flexible structure system with multiple degrees of freedom, represented in this research as a clamped–free–free–free truss type plate rotated by motors. The controller has two separate feedback loops for tracking and damping, and the vibration suppression controller is independent of position tracking control. In addition to stabilizing the actual system, the proposed proportional–derivative (PD) control, based on genetic algorithm (GA) to seek the primary optimal control gain, must supplement a fuzzy control law to ensure a stable nonlinear system. This is done by using an intelligent fuzzy controller based on adaptive neuro-fuzzy inference system (ANFIS) with GA tuning to increase the efficiency of fuzzy control. The PD controller, in its assisting role, easily stabilized the linear system. The fuzzy controller rule base was then constructed based on PD performance-related knowledge. Experimental validation for such a structure demonstrates the effectiveness of the proposed controller. The broad range of problems discussed in this research will be found useful in civil, mechanical, and aerospace engineering, for flexible structures with multiple degree-of-freedom motion.     

Fractional-order optimal fuzzy control for network delay

Fuzzy logic control has been used frequently in tuning network control system (NCS) due to its on-line dynamic static non-linear match and several remarkable fractional-order controllers have achieved satisfactory control performance when applied to NCS in present years, therefore, in this paper, a novel fractional fuzzy logic controller which combined the fractional algorithm and fuzzy logic control together has been proposed to deal with fixed and random network induced delays in closed-loop feedback systems. The comparisons of set-point tracking performances of fractional fuzzy logic PID controller (FFuzzyPID), conventional fuzzy logic PID controller(FuzzyPID), fractional optimal PID controller (FOPID), and optimal PID controller(OPID) on a representative plant with fixed and random network delays have been shown with simulations. The simulation results indicate that fractional fuzzy logic controller has higher capability to handle network delays compared with other controllers in most cases.     

基于粒子群优化的自适应模糊制冷控制算法

为解决空间斯特林制冷机和探测器热负载不确定及存在变化的问题,提出了自适应模糊PID制冷控制。在空间环境中使用的斯特林制冷机参数会随着时间的变化而发生改变,探测器负载也会随着工作模式和工作时间的变化而变化,整个制冷系统涉及的变量多,参数非线性。采用传统的控制方法,在固定的单一条件、环境下得到的控制参数,环境和负载发生变化后容易性能变差甚至不稳定,控制精度和稳定性不能满足使用要求。设计了一种自适应斯特林制冷机控制器,通过综合自适应模糊PID控制的方法,采用粒子群优化算法调整控制参数以减小代价函数。通过仿真和试验验证算法的有效性和鲁棒性。     

混沌系统的变论域模糊控制算法研究

混沌运动和混沌控制受到广泛关注,本文利用模糊控制实现混沌系统的控制.针对模糊控制器精度不高,模糊控制中规则数量与控制精度之间的矛盾,提出了一种基于蚁群优化算法的变论域模糊控制器.通过分析变论域模糊控制中的2类伸缩因子,指出其中1类并不能满足广义伸缩因子条件.提出利用蚁群优化算法对伸缩因子智能寻优的方法,在对蚁群算法改进的基础上,构成一种基于蚁群算法的变论域模糊控制,将设计的控制器用于Duffing混沌系统的控制.仿真结果表明,提出的控制算法在收敛速度和稳态性能上要略优于其他控制方式. 关键词： 混沌 变论域模糊控制 伸缩因子 蚁群优化算法     

模糊PID控制在ATP伺服系统中的应用

针对空间光通信ATP伺服系统采用一种模糊PID参数自整定的控制方法,结合模糊控制与常规PID控制的优点,讨论了模糊PID参数自整定控制器的设计方法。利用MATLAB中的模糊控制工具箱进行了系统的辅助设计与仿真实验,并与传统PID控制系统进行比较。仿真结果表明,该控制方法明显优于传统PID控制,并能使ATP系统的视轴稳定性得到提高。     

模糊PID控制在电视跟踪伺服系统中的应用

针对电视跟踪伺服系统提出了一种模糊PID控制方法，该方法结合简单模糊控制与常规PID控制的优点,讨论了模糊PID控制器的设计方法，同时利用MATLAB软件中的模糊控制工具箱进行了系统的辅助设计与仿真实验.仿真结果表明，该控制方法可使电视跟踪伺服系统性能得到提高.     

Robust adaptive fuzzy neural tracking control for a class of unknown chaotic systems

In this paper, an adaptive fuzzy neural controller (AFNC) for a class of unknown chaotic systems is proposed. The proposed AFNC is comprised of a fuzzy neural controller and a robust controller. The fuzzy neural controller including a fuzzy neural network identifier (FNNI) is the principal controller. The FNNI is used for online estimation of the controlled system dynamics by tuning the parameters of fuzzy neural network (FNN). The Gaussian function, a specific example of radial basis function, is adopted here as a membership function. So, the tuning parameters include the weighting factors in the consequent part and the means and variances of the Gaussian membership functions in the antecedent part of fuzzy implications. To tune the parameters online, the back-propagation (BP) algorithm is developed. The robust controller is used to guarantee the stability and to control the performance of the closed-loop adaptive system, which is achieved always. Finally, simulation results show that the AFNC can achieve favourable tracking performances.     

永磁直线同步电机位置系统的模糊IP控制研究

针对具有电磁推力大、响应快、易于矢量解耦控制的永磁直线同步电机PMLSM,研究高精度位置伺服控制系统的设计,以满足高速加工与高精度微进给加工的需求。考虑被控对象的变化和外界扰动,控制器的参数难于在线修订,设计了一种模糊/积分-比例IP位置控制器。它将具有并联反馈环节的IP控制器与模糊控制器有效结合,根据位置偏差的变化率进行切换,即存在较大输入指令与系统输出偏差较大时采用模糊控制,而系统输出接近于输入指令时则采用IP控制器,从而发挥模糊控制器对变参数系统的自适应性和IP控制器的快速和准确性优势。仿真实验结果表明模糊/IP控制器在稳态精度和动态性能方面优于单纯的IP控制器和模糊控制器,能够满足变参数控制系统的性能指标。     

基于自适应模糊控制的分数阶混沌系统同步

本文主要研究了带有未知外界扰动的分数阶混沌系统的同步问题.基于分数阶Lyapunov稳定性理论,构造了分数阶的参数自适应规则以及模糊自适应同步控制器.在稳定性分析中主要使用了平方Lyapunov函数.该控制方法可以实现两分数阶混沌系统的同步,使得同步误差渐近趋于0.最后,数值仿真结果验证了本文方法的有效性.     

嵌入式电子节能控制器的设计与实现

节能控制能够有效降低能耗,对保护环境等方面具有重要影响。但目前大多数电子节能控制器都是通过采用单片机技术和双向晶闸管过零触发交流调压电路对电子节能控制器进行设计。通过介绍电子的负荷特点和节能原理,分析电子节能控制器的硬件组成电路,并对电子节能控制器的主要软件程序的流程图进行设计,完成电子节能控制器设计。但这种方法节能控制效果较低,难以保证电子节能控制器性能,为此,提出一种基于模糊PID控制的嵌入式电子节能控制器设计与实现方法。首先通过对嵌入式电子节能控制器的处理器、电源电路、复位电路、系统时钟电路、JTAG接口电路、D/A转换电路、功放电路、双极性电源电路以及嵌入式电子节能控制器硬件PCB板器件布局等的设计,完成嵌入式电子节能控制器硬件设计。在此基础上,选用模糊PID控制方法对嵌入式电子节能控制器进行设计。通过分析模糊PID控制原理,介绍加入自调节因子的模糊PID控制的算法设计,以此确定输入输出隶属度函数,再利用模糊推理和模糊规则,得到电子节能控制器的模糊控制过程,从而完成嵌入式电子节能控制器的设计。实验证明,所提方法能够有效提高嵌入式电子节能控制器的节能控制效果,具有良好的使用价值。     

近程巡飞弹姿态控制优化仿真研究

近程巡飞弹姿态控制系统是一个非线性、时变性及耦合性的复杂控制系统,是近程巡飞弹武器系统型号研制的关键技术之一;传统的PID控制在不同巡飞状态下调节稳定性较差、响应时间慢、影响姿态控制的稳定性和机动性;针对近程巡飞弹姿态控制系统中PID控制参数不可调,自适应、抗干扰性能较差等问题,引入了自适应模糊PID控制方法,使系统在不同巡飞姿态和干扰条件下能够实时整定PID的三个控制参数,提高系统的控制性能;在此基础上设计了近程巡飞弹的姿态角控制回路,并以俯仰角为例,在Matlab/Simulink平台下建立仿真模型,进行仿真实验;仿真结果显示,采用自适应模糊PID的控制方法,系统控制性能更好,抗干扰能力和自适应能力优于传统PID控制,减小了巡飞过程中姿态角的波动情况。     

基于AFSMC算法的四旋翼飞行器控制策略研究

针对四旋翼飞行器在飞行过程中,控制系统存在非线性、强耦合、不确定性和鲁棒性差的问题,建立了关于四旋翼飞行器的动力学数学模型,将自适应控制、模糊控制和滑模控制相结合,提出基于自适应模糊滑模控制(AFSMC)的快速平稳控制策略。采用模糊系统推理方法实现理想控制律的逼近。在满足李雅普诺夫稳定性条件的前提下进行控制器的设计和稳定性分析,并结合四旋翼的数学模型和给定参数进行了MATLAB仿真。仿真结果表明,AFSMC控制器相比常规PID控制器具有良好的动态性能和抗干扰能力。     

基于模糊PID控制的永磁同步电机控制器研究

为了提高复杂环境条件下永磁同步电机（PMSM）控制器的动态控制性能与抗干扰能力,分析了永磁同步电机的速度-电流（或力矩）双闭环控制调速结构,提出了一种基于模糊PID控制原理的速度环控制策略。速度环运行时,模糊PID控制器首先将永磁同步电机转速的误差及误差变化率进行模糊化处理,然后依据模糊规则进行模糊推理,并自动在线整定出速度环PID的三个系数（比例系数、积分系数、微分系数）,不仅减少了速度环的调节时间,也能增强抵御来自电流环（或力矩环）的干扰。仿真结果表明,当永磁同步电机的转速发生变化或负载发生扰动时,相比于传统的PID控制器,模糊PID控制器能提高系统的动态性能与鲁棒性。该方法用于永磁同步电机的控制是可行、有效的。     

多阵元高强度聚焦超声多目标控制方法研究

对多阵元高强度聚焦超声非侵入外科治疗采用多目标控制方法可望取得好的温度控制性能.提出和构造了闭环控制的模糊控制器,从而得到好的温度特性 为得到理想的能量空间分布,专门形成了优化声场的模式控制 另外,重要参量辨识和开关模式控制技术是十分有效的控制方法.考虑非线性效应的仿真结果显示出优越的控制性能.随后的活体实验结果显示出好的温度响应特性,同时证实了多目标控制方法的可行性 关键词： 高强度聚焦超声 多目标 模糊逻辑     

Full-order sliding mode control of uncertain chaos in a permanent magnet synchronous motor based on a fuzzy extended state observer

A full-order sliding mode control based on a fuzzy extended state observer is proposed to control the uncertain chaos in the permanent magnet synchronous motor. Through a simple coordinate transformation, the chaotic PMSM model is transformed into the Brunovsky canonical form, which is more suitable for the controller design. Based on the fuzzy control theory, a fuzzy extended state observer is developed to estimate the unknown states and uncertainties, and the restriction that all the system states should be completely measurable is avoided. Thereafter, a full-order sliding mode controller is designed to ensure the convergence of all system states without any chattering problem. Comparative simulations show the effectiveness and superior performance of the proposed control method.     

Free vibration control of smart composite beams using particle swarm optimized self-tuning fuzzy logic controller

This paper deals with active free vibrations control of smart composite beams using particle-swarm optimized self-tuning fuzzy logic controller. In order to improve the performance and robustness of the fuzzy logic controller, this paper proposes integration of self-tuning method, where scaling factors of the input variables in the fuzzy logic controller are adjusted via peak observer, with optimization of membership functions using the particle swarm optimization algorithm. The Mamdani and zero-order Takagi–Sugeno–Kang fuzzy inference methods are employed. In order to overcome stability problem, at the same time keeping advantages of the proposed self-tuning fuzzy logic controller, this controller is combined with the LQR making composite controller. Several numerical studies are provided for the cantilever composite beam for both single mode and multimodal cases. In the multimodal case, a large-scale system is decomposed into smaller subsystems in a parallel structure. In order to represent the efficiency of the proposed controller, obtained results are compared with the corresponding results in the cases of the optimized fuzzy logic controllers with constant scaling factors and linear quadratic regulator.