Synthesis of (3′R,5′S)-3′-hydroxycotinine using 1,3-dipolar cycloaddition of a nitrone

To synthesize (3′R,5′S)-3′-hydroxycotinine [(+)-1], the main metabolite of nicotine (2), cycloaddition of C-(3-pyridyl)nitrones 3a, 3c, and 15 with (2R)- and (2S)-N-(acryloyl)bornane-10,2-sultam [(2R)- and (2S)-8] was examined. Among them, l-gulose-derived nitrone 15 underwent stereoselective cycloaddition with (2S)-8 to afford cycloadduct 16, which was elaborated to (+)-1.     

Synthesis of ‘thianthrene dimer’ by the coupling reaction of stannylthianthrenes in the presence of copper catalysts

The coupling reaction of 1-tributylstannylthianthrene (5) and 2-tributylstannylthianthrene (7) in the presence of copper catalysts at rt afforded the thianthrene dimer 1,1′-bithianthrene (3), 2,2′-bithianthrene (8), and 1,2′-dithianthrene (9) in high yields. Also we obtained thianthrene oxide dimer (R,R) (S,S)-1-(10-S-monoxythianthrene-1-yl)thianthrene-10-S-monoxide (12) and (R,S) (S,R)-1-(10-S-monoxythianthrene-1-yl)thianthrene-10-S-monoxide (13) from 1-tributylstannyl-10-S-monoxythianthrene (10) under the same reaction condition. The final structural conformation of 3, 8, 9, and 12 was performed by X-ray crystallographic analysis. Further, the solvent effects in the coupling reactions were also examined.     

Stereoselective synthesis of tetrahydroisoquinoline alkaloids: (−)-trolline, (+)-crispin A, (+)-oleracein E

Tetrahydroisoquinoline alkaloids, (S)-(−)-trolline, (R)-(+)-crispin A, and (R)-(+)-oleracein E, have been synthesized stereoselectively from the both enantiomers of common intermediate (S)-4 and (R)-4. The key step in the synthesis include a stereoselective Bi(OTf)₃-catalyzed intramolecular 1,3-chirality transfer reaction of chiral non-racemic amino allylic alcohols (S)-6 and (R)-6 to construct both enantiomers of (E)-1-propenyl tetrahydroisoquinoline 4.     

Stereoselective construction of the 1,1,1-trifluoroisopropyl moiety by asymmetric hydrogenation of 2-(trifluoromethyl)allylic alcohols and its application to the synthesis of a trifluoromethylated amino diol

The asymmetric hydrogenation of a series of 2-(trifluoromethyl)allylic alcohols 1a-g catalyzed by a BINAP-Ru(II) diacetate complex gave the corresponding products 2a-g in high yield (>90% yield) and high diastereoselectivity (>95% de). The asymmetric hydrogenation of 2-(trifluoromethyl)allylic alcohols provided an efficient stereoselective method to construct the 1,1,1-trifluoroisopropyl moiety. Based on the asymmetric hydrogenation of the 2-(trifluoromethyl)allylic alcohol 5a prepared by the reaction of (R)-2,2-dimethyl-1,3-dioxolane-4-carboxaldehyde with 3,3,3-trifluoroisopropenyllithium, (2R,3S,4R)-4-trifluoromethyl-1-aminopentane-2,3-diol 9 was synthesized in 36% overall yield over five steps.     

Diastereoselective route to (2R,5S)- and (2S,5S)-2-methyl-1,6-dioxaspiro[4.5]decane, a pheromone component of the wasp Paravespula vulgaris

A diastereoselective approach to (2R,5S)- and (2S,5S)-2-methyl-1,6-dioxaspiro[4.5]decane 1 and 1a is described. The route starts with an alkylation reaction among the cyclopentanone N,N-dimethylhydrazone 6 and the chiral iodides (R)-3 or (S)-3, derived from the enantiomers of ethyl β-hydroxybutyrate, controlling the estereocenter at C-2 of the molecules. The alkylated products 7 and 7a were easily transformed into the 1,8-O-TBS-1,8-dihydroxy-5-nonanones 9 and 9a in four steps, and a subsequent stereoselective spiroketalization, in acidic media, afforded a Z:E mixture (1:2) of compounds 1 and 1a.     

Application of the Cosford cross-coupling protocol for the stereoselective synthesis of (R)-(+)-goniothalamin, (R)-(+)-kavain and (S)-(+)-7,8-dihydrokavain

An efficient and versatile synthetic method has been developed and utilized for the stereoselective synthesis of (R)-(+)-goniothalamin 1, (R)-(+)-kavain 2 and (S)-(+)-7,8-dihydrokavain 3. Application of the Cosford protocol and direct conversion of aldehydes to β-keto-esters are the key steps in our approach.     

Gold catalysis in stereoselective natural product synthesis: (+)-linalool oxide, (−)-isocyclocapitelline, and (−)-isochrysotricine

A stereoselective synthesis of the tetrahydrofuran-containing natural products (2S,5R)-(+)-linalool oxide (1), (−)-isocyclocapitelline (2), and (−)-isochrysotricine (3) is reported. Key steps are the copper-mediated S_N2′-substitution of propargyl oxiranes 7 and the gold-catalyzed cycloisomerization of dihydroxyallenes 8/17, resulting in a highly efficient center-to-axis-to-center chirality transfer. The enantioselective total synthesis of (−)-isocyclocapitelline (2) and (−)-isochrysotricine (3) allowed the elucidation of the absolute configuration of these β-carboline natural products.     

Screening of ligands in the asymmetric metallocenethiolatocopper(I)-catalyzed allylic substitution with Grignard reagents

Screening of metallocenethiolate ligands for copper(I)-catalyzed substitution of allylic acetates with Grignard reagents has been carried out. The previously used ligand, lithium (R,S_p)-2-(1-dimethylaminoethyl)ferrocenylthiolate (4a), possessing both central and planar chirality, was the starting point for the screening. It was found that the diastereomeric ligand lithium (R,R_p)-2-(1-dimethylaminoethyl)ferrocenylthiolate (4b) exhibiting reversed planar chirality gave increased enantioselectivity in the allylic substitution, at least when cinnamyl acetate was used as a substrate. The ruthenocene-based ligand lithium (R,S_p)-2-(1-dimethylaminoethyl)ruthenocenylthiolate (4c) gave an enhanced reaction rate, but lower chiral induction. The use of disulfide bis[(R,S_p)-2-(1-dimethylaminoethyl)ferrocenyl]disulfide (7a) as a ligand precursor worked well but resulted in lower enantioselectivity.     

Enantioselective synthesis of axially chiral 1-(1-naphthyl)isoquinolines and 2-(1-naphthyl)pyridines through sulfoxide ligand coupling reactions

Racemic 1-(1′-isoquinolinyl)-2-naphthalenemethanol rac-12 was prepared through a ligand coupling reaction of racemic 1-(tert-butylsulfinyl)isoquinoline rac-7 with the 1-naphthyl Grignard reagent 10. Resolution of rac-12 was achieved through chromatographic separation of the Noe-lactol derivatives 14 and 15, providing (R)-(−)-12 of >99% ee and (S)-(+)-12 of 90% ee. The ligand coupling reaction of optically enriched sulfoxide (S)-(−)-7 (62% ee) with Grignard reagent 10 furnished rac-12, with the absence of stereoinduction resulting from competing rapid racemisation of the sulfoxide 7. Reaction of optically enriched (S)-(−)-7 with 2-methoxy-1-naphthylmagnesium bromide was also accompanied by racemisation of the sulfoxide 7, and furnished optically active (+)-1-(2′-methoxy-1′-naphthyl)isoquinoline (+)-3b in low enantiomeric purity (14% ee). The absolute configuration of (+)-3b was assigned as R using circular dichroism spectroscopy, correcting an earlier assignment based on the Bijvoet method, but in the absence of heavy atoms. Optically active 2-pyridyl sulfoxides were found not to undergo racemisation analogous to the 1-isoquinolinyl sulfoxide 7, with the ligand coupling reactions of (R)-(+)- and (S)-(−)-2-[(4′-methylphenyl)sulfinyl]-3-methylpyridines, (R)-(+)-17 and (S)-(−)-17, with 2-methoxy-1-naphthylmagnesium bromide providing (−)- and (+)-2-(2′-methoxy-1′-naphthyl)-3-methylpyridines, (−)-18 and (+)-18, in 53 and 60% ee, respectively. The free energy barriers to internal rotation in 3b and 18 have been determined, and the isoquinoline (R)-(−)-12 examined as a ligand in the enantioselectively catalysed addition of diethylzinc to benzaldehyde; (R)-(−)-12 was also converted to (R)-(−)-N,N-dimethyl-1-(1′-isoquinolinyl)-2-naphthalenemethanamine (R)-(−)-19, and this examined as a ligand in the enantioselective Pd-catalysed allylic substitution of 1,3-diphenylprop-2-enyl acetate with dimethyl malonate.     

Dual activation in a homolytic coupling reaction promoted by an enantioselective dinuclear vanadium(IV) catalyst

A new concept of dual activation catalysis in homolytic coupling reaction of 2-naphthol derivatives is described. The dinuclear vanadium(IV) catalyst (R,S,S)-1a promotes the oxidative coupling reaction of 2-naphthol derivatives with high reactivity and enantioselectivity. This dual activation mechanism is supported by the fact that the reaction rate of oxidative coupling of 2-naphthol promoted by the (R,S,S)-1a is 48 times faster than that of the mononuclear complex (S)-3 and a lower catalyst loading of (R,S,S)-1a shows higher catalyst efficiency both in enantioselectivity and chemical yield.     

Application of chiral tetrahydropentalene ligands in rhodium-catalyzed 1,4-addition of (E)-2-phenylethenyl- and (Z)-propenylboronic acids to enones

Chiral tetrahydropentalenes (3aR,6aR)-1 have been prepared and used as ligands in the Rh-catalyzed 1,4-addition of 1-alkenylboronic acids to cyclic enones 5. It has been discovered that the stereochemistry of the reaction was controlled by the steric properties of the aryl groups in 1 rather than their electronic nature. In the vinylation with (E)-2-phenylethenylboronic acid 5, ligands (3aR,6aR)-1 provided enantioselectivity up to 87% ee and gave high yields of ethenylketones 6 in the presence of 1 (6.6 mol %). The configuration of all ketone products obtained with (3aR,6aR)-1 is (S). Rh-catalyzed reaction of cyclopentenone 4a and (Z)-propenylboronic acid 7 in the presence of ligands (3aR,6aR)-1 yielded at 50 °C an inseparable mixture of (Z)- and (E)-ketones 8 with (Z)-8 as the major product and both in only moderate enantiomeric excess.     

Total synthesis of (−)-amathaspiramide F

The stereoselective total synthesis of the marine alkaloid, (−)-amathaspiramide F (1), was achieved from the α-hydroxy-α-ethynylsilane 2. The key steps involved in the synthesis were (1) the enolate Claisen rearrangement of the α-acyloxy-α-alkenylsilane for the stereoselective construction of the consecutive C5 and C9 chiral centers of 1 (erythro configuration), (2) the construction of aza-spirohemiaminal 28, and (3) dibromination during the final stage of the total synthesis. The reaction of the (Z)-α-acyloxy-α-alkenylsilane 22 possessing the Boc-homoallylglycine ester as the acyloxy group underwent stereoselective enolate Claisen rearrangement to give the desired erythro product 23. On the other hand, the reaction of the α-acyloxy-α-alkenylsilane (Z)-5 having Boc-proline gave the unexpected threo product 6. Oxidative cleavage of the vinylsilane group of 23 followed by treatment with heptamethyldisilazane as the methylamine equivalent gave aza-spirohemiaminal 28. The problematic regioselective dibromination to 28 was achieved using n-Bu₄NBrCl₂.     

Synthesis of (S)-, (R)-, and (rac)-2-amino-3,3-bis(4-fluorophenyl)propanoic acids and an evaluation of the DPP IV inhibitory activity of Denagliptin diastereomers

The non-proteinogenic amino acid (2S)-2-amino-3,3-bis(4-fluorophenyl)propanoic acid [(S)-1] is a key intermediate required for the synthesis of Denagliptin (2a). Denagliptin is a dipeptidyl peptidase IV (DPP IV) inhibitor that is being developed for the treatment of type-2 diabetes mellitus. A diastereoselective, cost-efficient synthetic procedure for (S)-1 was developed by alkylating a Ni(II) glycine equivalent derived from (S)-2-[(N-benzylprolyl) amino] benzophenone [(S)-BPB]. The alkylated product was then decomposed to isolate the target amino acid (S)-1 (ee >99%) and ligand (S)-BPB, which can be reused in subsequent reactions. The enantiomer (R)-1 and racemate (rac)-1 were synthesized from their corresponding Ni(II) glycine equivalents. Denagliptin diastereomers (2), derived from the key intermediates (S)-1, (R)-1, and (rac)-1 were synthesized, and their dipeptidyl peptidase IV inhibitory activities were investigated. These findings are important in the design and synthesis of DPP IV inhibitors.     

Synthesis of (2S,3R)- and (2S,3S)-[3-H1]-proline via highly stereoselective hydrolysis of a silyl enol ether

A straightforward synthesis of (2S)-[3,3-²H₂]-proline 1c and (2S,3R)- and (2S,3S)-[3-²H₁]-proline, 1b and 1a, respectively, has been devised. The key step of the route to the latter compounds involves highly stereoselective hydrolysis of the silyl enol ethers 3 and 3a, respectively, with protonation (deuteriation) from the re-face of the silyl enol ether.     

Preparation of a new 1,2,3-trithiolane, trans-9,10,11-trithiabicyclo[6.3.0]undecane, and its oxidation reactions

The reaction of trans-cyclooctene with S₈O yielded a novel bicyclic 1,2,3-trithiolane and trans-9,10,11-trithiabicyclo[6.3.0]undecane (7). Oxidation of the trithiolane with dimethyldioxirane yielded three monoxides, which are assigned to two isomeric 9-oxides, rel-(1R,8R,9S)-9-oxide (15) and rel-(1R,8R,9R)-9-oxide (16), and 10-oxide (17). Further oxidation of rel-(1R,8R,9S)-9-oxide (15) provided rel-(1R,8R,9S,11S)-9,11-dioxide (18) and rel-(1R,8R,9R,11S)-9,11-dioxide (19), while that of rel-(1R,8R,9R)-9-oxide (16) gave rel-(1R,8R,9R,11S)-9,11-dioxide (19) and rel-(1R,8R,9R,11R)-9,11-dioxide (20). The structures of 18 and 19 were determined by X-ray crystallography. The structures of other oxides were elucidated by the spectroscopic data and results of further chemical transformations. Two isomers, 15 and 16, isomerized to one another. A 9,11-dioxide 20 isomerized to 19, which is in equilibrium with 18, where 18 is thermodynamically the most stable isomer.     

Stereoselective synthesis of (+)-(1R,2S,5S,7R)-2-hydroxy-exo-brevicomin

A stereoselective approach for the synthesis of (+)-(1R,2S,5S,7R)-2-hydroxy-exo-brevicomin from l-ascorbic acid has been described. The key steps are highly stereoselective nucleophilic addition reaction on aldehyde 8 and also a single pot transformation of 15 to (+)-(1R,2S,5S,7R)-2-hydroxy-exo-brevicomin. The later tandem reaction which involves the hydrogenation of double bond, debenzylation, MOM deprotection and bicyclic ketal formation was carried under Pd/C, H₂ followed by acid treatment.     

Stereoselective synthesis of (2S,3S,7S)-3,7-dimethylpentadec-2-yl acetate and propionate, the sex pheromones of pine sawflies

The stereoselective synthesis of (2S,3S,7S)-3,7-dimethylpentadec-2-yl acetate (2) and propionate (3) was accomplished by utilizing the cheap and easily available chiron (R)-4-methyl-δ-valerolactone (4). The key steps were chelation-controlled addition of Gilmann reagent to chiral β-alkoxy aldehyde 12 and the Cu(I)-catalyzed coupling of Grignard reagent with bromoester 5 in the presence of NMP.     

Practical and highly stereoselective method for the preparation of several chiral arylsulfinamides and arylsulfinates based on the spontaneous crystallization of diastereomerically pure N-benzyl-N-(1-phenylethyl)-arylsulfinamides

A novel and simple process for the preparation of enantiomerically pure (S_S)-benzenesulfinamide (S_S)-3a, (S_S)-p-toluenesulfinamide (S_S)-3b, (S_S)-p-chloro-benzenesulfinamide (S_S)-3c and (S_S)-p-fluorobenzenesulfinamide (S_S)-3d has been developed. The treatment of arylsulfinyl chlorides with (R)-N-benzyl-1-phenylethanamine in the presence of excess triethylamine gave diastereomeric mixtures of N-benzyl-N-(1-phenylethyl)-arylsulfinamides 1, which underwent spontaneous crystallization to furnish diastereomerically pure (R,S_S)-N-benzyl-N-(1-phenylethyl)-arylsulfinamides (R,S_S)-1a-1d in 28%, 29%, 27% and 31% yields, respectively. The diastereomerically pure compounds (R,S_S)-1 were then converted into four enantiopure (R_S)-methyl arylsulfinates (R_S)-2, and finally into four enantiopure (S_S)-arylsulfinamides (S_S)-3 in good yields.     

Stereoselective synthesis of (3R,4S)-3-methoxy-4-methylaminopyrrolidine

An efficient stereoselective approach for the synthesis of (3R,4S)-3-methoxy-4-methylaminopyrrolidine, a part of the structure of quinoline antibacterial compound (1a) and the naphthyridine antitumour agent (1b) has been described.     

Synthesis and odor of optically active trans-2,2,6-trimethylcyclohexyl methyl ketones and their related compounds

The synthesis characterized by cationic olefin cyclizations accomplished using ketone enol esters and odor of novel (1R,6S)- and (1S,6R)-2,2,6-trimethylcyclohexyl methyl ketones (5) are described. The stereoselective syntheses of (E)-(1R,6S)- and (E)-(1S,6R)-1-(2,2,6-trimethylcyclohexyl)-2-buten-1-one (6) and (1R,6S)-ethyl 2,2,6-trimethylcyclohexylcarboxylate (7), useful raw materials for flavor and fragrance, starting from the (1R,6S)- and (1S,6R)-5 are also described.