A chemical oscillating reaction in NaBrO3-pyruvic acid-H2SP4--[Ni(Me2[14]1,3-diene N4)]2+ system

In this paper we report a chemical oscillation catalyzed by [Ni(Me₂[14]l,3-diene N₄)]²⁺ (Me₂[14]1,3-diene N₄ denotes 2,3-dimethyl-1,4,8,11-tetraazacyclotetradeca-1,3-diene) in BrO₃-pyruvic acid-H₂SO₄ system. The domain of the existence of the oscillation waa obtained. The effect of initial concentration of the components on the oscillation were studied. The features of the oscillations were described in detail. We also examined the effects of Ag⁺, Hg²⁺, CCl₄, free radical inhibitors, etc. on the oscillations.     

Substituent Effects on Fe+-Mediated [4+2] Cycloadditions in the Gas Phase

The Fe⁺-mediated [4+2] cycloaddition of dienes with alkynes has been examined by four-sector ion-beam and ion cyclotron resonance mass spectrometry. Prospects and limitations of this reaction were evaluated by investigating several Me-substituted ligands. Me Substitution at C(2) and C(3) of the diene, i.e., 2-methylbuta-1,3-diene, 2,3-dimethylbuta-1,3-diene, hardly disturbs the cycloaddition. Similarly, variation of the alkyne by use of propyne and but-2-yne does not affect the [4+2] cycloaddition step, but allows for H/D exchange processes prior to cyclization. In contrast, Me substituents in the terminal positions of the diene moiety (e.g., penta-1,3-diene, liexa-2,4-diene) induce side reactions, namely double-bond migration followed by [3+2] and [5+2] cycloadditions, up to almost complete suppression of the [4+2] cycloaddition for 2,4-dimethylhexa-2,4-diene. Similarly, alkynes with larger alkyl substituents (pent-1-yne, 3,3-dimethylbut-1-yne) suppress the [4 + 2] cycloaddition route. Stereochemical effects have been observed for the (E)- and (Z)-penta-1,3-diene ligands as well as for (E,E)- and (E,Z)-hexa-2,4-diene. A mechanistic explanation for the different behavior of the stereoisomers in the cyclization reaction is developed. Further, the regiochemical aspects operative in the systems ethoxyacetylene/pentadiene/Fe⁺ and ethoxyacetylcne/isoprene/Fe⁺ indicate that substituents avoid proximity.     

STRUCTURE STUDIES OF [Et_4N]_4[Cu_8(i-mnt)_6] (i-mnt=S_2C=C(CN)_2) AND [Me_4N]_4[Cu_5Ag_3(i-mnt)_6]·H_2O

<正> [Me4N]6[Ag6(i-mnt)6].H2O(1),[Et4N]4[Cu8(i-mnt)6](2) and [Me4N]4-[Cu5Ag3(i-mnt)6].H2O(3)(i-mnt=S2C=C(CN)2) were synthesized. The crystal and molecular structure of the complex 1 was reported by us.The structure of the complex 2 was determined from single crystal X-ray diffraction data. [Et4N]4[Cu8(i-mnt)s] 2, Mr=1870.46, monoclinic, P21/n, a=14.724(6), b = 17.228(3), c=15.59(1)A,β= 100.75(7)°,V=3886.3A3;Z = 2,Dc= 1.598 g/cm3. Complex 3 has been characterized by ICP elemental analyses and IR spectrum.     

DFT-calculation of the structural isomers of (1-methyl-4-phenyl-1-azabuta-1,3-diene)tetracarbonyliron(0) and (4-phenyl-1-oxabuta-1,3-diene)tetracarbonyliron(0)

DFT calculations (B3LYP/LANL2DZ/6-31 G*) were used to investigate the ways in which 1-methyl-4-phenyl-1-azabuta-1,3-diene and 4-phenyl-1-oxabuta-1,3-diene bind to a Fe(CO)(4) moiety. As possible coordination modes, eta(2)-coordination across the C=C or C=N/C=O bond, sigma-coordination to the lone pair of the heteroatom, or eta(3)-coordination through the C=C-C or the N=C-C/O=C-C moiety were considered. The latter forms involve coupling of the non-coordinated atom of the heterodiene with one of the carbonyl ligands to an acyl species. The calculated geometric parameters of all structures compare well with X-ray crystallographic data of similar complexes. The species in which the ligand is transoid and sigma-coordinated is lowest in energy, for both compounds studied. However, the eta(2)-alkene bound 1-oxabuta-1,3-diene complex is practically equal in energy to the sigma-transoid form and thus competes. This agrees with experimental observations that the heterodiene is sigma-bonded in Fe(CO)(4)(1-methyl-4-phenyl-1-azabuta-1,3-diene) but eta(2)-coordinated in Fe(CO)(4)(4-phenyl-1-oxabuta-1,3-diene). The solvent dependence was estimated from single point PCM calculations, for CH(2)Cl(2) as solvent. For the 1-azabuta-1,3-diene complexes, the relative energies of eta(2)-olefin and eta(3)-allyl forms are inverted, with the eta(3)-allyl form being more stable in polar solvents. The 1-oxabuta-1,3-diene complexes in their eta(2)-olefin and sigma-O forms change order of relative energy, and conversion to the sigma-O form is expected in a polar medium for these complexes. Calculated IR vibrational stretching frequencies of the carbonyl ligands and the C[double bond, length as m-dash]N/C[double bond, length as m-dash]O bond were compared with experimental data, to produce the best fits for the sigma-transoid form of Fe(CO)(4)(1-methyl-4-phenyl-1-azabuta-1,3-diene) and eta(2)-olefin bonded Fe(CO)(4)(4-phenyl-1-oxabuta-1,3-diene). These results are again consistent with the experiment and show that the DFT method applied in this work can be used as an aid for structural validation.     

Pt(II)-mediated nitrile-tetramethylguanidine coupling as a key step for a novel synthesis of 1,6-dihydro-1,3,5-dihydrotriazines

The coupling between tetramethylguanidine, HN=C(NMe2)2, and coordinated organonitriles in the platinum(II) complexes cis/trans-[PtCl2(RCN)2] (R = Me, Et, Ph) proceeds rapidly under mild conditions to afford the diimino compounds containing two N-bound monodentate 1,3-diaza-1,3-diene ligands [PtCl2{NH=C(R)N=C(NMe2)2}2] (R = Et, trans-1; R = Ph, trans-2; R = Me, cis-3; R = Et, cis-4), and this reaction is the first observation of metal-mediated nucleophilic addition of a guanidine to ligated nitrile. Complexes 1-4 were characterized by elemental analyses (C, H, N), X-ray diffraction, FAB mass spectrometry, IR, and 1H and 13C{1H} NMR spectroscopies; assignment of signals from E/Z-forms of 1,3-diaza-1,3-diene ligands and verification of routes for their Z right harpoon over left harpoon E isomerization in solution were performed using 2D 1H,1H-COSY, 1H,13C-HETCOR, and 1D NOE NMR experiments. The newly formed and previously unknown 1,3-diaza-1,3-dienes NH=C(R)N=C(NMe2)2 were liberated from the platinum(II) complexes [PtCl2{NH=C(R)N=C(NMe2)2}2] (1-3) by substitution with 2 equiv of 1,2-bis-(diphenylphosphino)ethane (dppe) to give the uncomplexed HN=C(R)N=C(NMe2)2 species (5-7) in solution and the solid [Pt(dppe)2](Cl)2. The former were utilized in situ, after filtration of the latter, in the reaction with 1,3-di-p-tolylcarbodiimide, (p-tol)N=C=N(tol-p), in CDCl3 to generate (6E)-N,N-dimethyl-1-(4-methylphenyl)-6-[(4-methylphenyl)imino]-1,6-dihydro-1,3,5-triazin-2-amines) (8-10) due to the [4 + 2]-cycloaddition accompanying elimination of HNMe2. The formulation of 8-10 is based on ESI-MS, 1H, 13C{1H} NMR, and X-ray crystal structures determined for 9 and 10. The reaction of 1,3-diaza-1,3-dienes with 1,3-di-p-tolylcarbodiimide, described in this article, constitutes a novel synthetic approach to a useful class of heterocyclic species like 1,6-dihydro-1,3,5-triazines.     

Synthetic applications of (Me3SiNSN)2E (E = S, Se) in chalcogen-nitrogen chemistry: formation and structural characterization of Cl2TeESN2 (E = S, Se) and [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, Br)

The reaction of (Me3SiNSN)2S with TeCl4 in CH2Cl2 affords Cl2TeS2N2 (1) and that of (Me3SiNSN)2Se with TeCl4 produces Cl2TeSeSN2 (2) in good yields. The products were characterized by X-ray crystallography, as well as by NMR and vibrational spectroscopy and EI mass spectrometry. The Raman spectra were assigned by utilizing DFT molecular orbital calculations. The pathway of the formation of five-membered Cl2TeESN2 rings by the reactions of (Me3SiNSN)2E with TeCl4 (E = S, Se) is discussed. The reaction of (Me3SiNSN)2Se with [PPh4]2[Pd2X6] yields [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, 4a; Br, 4b), the first examples of complexes of the (Se2N2S)2- ligand. In both cases, this ligand bridges the two palladium centers through the selenium atoms.     

Expanding the chemical space for push-pull chromophores by non-concerted [2+2] and [4+2] cycloadditions: access to a highly functionalised 6,6-dicyanopentafulvene with an intense, low-energy charge-transfer band

Non-concerted [2+2] and [4+2] cycloadditions between N,N-dimethylanilino-substituted 1,1,2,4,4-pentacyanobuta-1,3-diene and 4-ethynyl-N,N-dimethylaniline are controlled by solvent polarity and provide access to a highly functionalised 6,6-dicyanopentafulvene featuring an intense, low-energy charge-transfer band and to an unusual spirocyclic zwitterion, characterised by X-ray analysis.     

Electrophilic chemistry of thia-PAHs: stable carbocations (NMR and DFT), S-alkylated onium salts, model electrophilic substitutions (nitration and bromination), and mutagenicity assay

First examples of stable carbocations are reported from several classes of thia-PAHs with four fused rings, namely, benzo[b]naphtho[2,1-d]thiophene (1) and its 3-methoxy derivative (2), phenanthro[4,3-b]thiophene (3) and its 7-methoxy (4), 10-methoxy (5), and 9-methoxy (6) derivatives, phenanthro[3,4-b]thiophene (7) and its 7-methoxy (8) and 9-methoxy (9) derivatives, and 3-methoxybenzo[b]naphtha[1,2-d]thiophene (11). In several cases, the resulting carbocations were also studied by GIAO-DFT. Charge delocalization modes in the resulting carbocations were probed. A series of S-alkylated onium tetrafluoroborates, namely, 1Me+, 1Et+, 2Et+, and 7Me+ (from 1, 2, and 7), 10Me+ and 10Et+ (from benzo[b]naphtha[1,2-d]thiophene 10), 12Me+ and 12Et+ (from phenanthro[3,2-b][1]benzothiophene 12), 13Me+ (from 3-methoxyphenanthro[3,2-b]benzothiophene 13), 14Me+ (from phenanthro[4,3-b][1]benzothiophene 14), and 15Me+ (from 3-methoxyphenanthro[4,3-b][1]benzothiophene 15), were synthesized. PAH-sulfonium salts 1Me+, 1Et+, 10Me+, 10Et+, 12Me+, and 14Me+ proved to be efficient akylating agents toward model nitrogen nucleophile receptors (imidazole and azaindole). Facile transalkylation to model nucleophiles (including guanine) is also supported by favorable reaction energies computed by DFT. Ring opening energies in thia-PAH-epoxides from 1, 3, and 7 and charge delocalization modes in the resulting carbocations were also evaluated. The four-ring-fused thia-PAHs 1, 2, 3, 4, 5, 7, 8, and 11 are effectively nitrated under extremely mild conditions. Nitration regioselectivity corresponds closely to protonation under stable ion conditions. Bromination of 4 and 6 is also reported. Comparative mutagenicity assays (Ames test) were performed on 1 versus 1NO2, 5 versus 5NO2, and 11 versus 11NO2. Compound 5NO2 was found to be a potent direct acting mutagen.     

Spectrofluorometric determination of hydrogen peroxide based on oxidative catalytic reactions of p-hydroxyphenyl derivatives with metal complexes of thiacalix[4]arenetetrasulfonate on a modified anion-exchanger.

The peroxidase-like catalytic activity of metal complexes of thiacalix[4]arenetetrasulfonate (TCAS[4]) on a modified anion-exchanger (Me(n+)-TCAS[4]A-500; Me(n+) = H2, Fe3+, Fe2+, Mn3+, Co3+, Co2+, Cu2+, Zn2+, Ni2+) for the oxidation of p-hydroxyphenyl derivatives to produce fluorescent substances in the presence of hydrogen peroxide has been investigated. Among the Me(n+)-TCAS[4]A-500 tested, Fe(3+)-TCAS[4]A-500 exhibited the highest level of catalytic activity for the oxidation of p-acetoamidophenol in a carbonate buffer solution of pH 10. The catalytic activity of Fe(3+)-TCAS[4]A-500 was then used for the spectrofluorometric determination of hydrogen peroxide. The calibration curve for the Fe(3+)-TCAS[4]A-500 method was linear over a range spanning from 0.1 to 5.0 microg of hydrogen peroxide in a 1.0 ml sample solution.     

Homoleptic cobalt and copper phenolate A2[M(OAr)4] compounds: the effect of phenoxide fluorination

Two series of homoleptic phenolate complexes with fluorinated aryloxide ligands A2[M(OAr)4] with M=Co2+ or Cu2+, OAr-=(OC6F5)- (OArF) or [3,5-OC6H3(CF3)2]- (OAr'), A+=K (18-crown-6)+, Tl+, Ph4P+, Et3HN+, or Me4N+ have been synthesized. Two related complexes with nonfluorinated phenoxide ligands have been synthesized and studied in comparison to the fluorinated aryloxides demonstrating the dramatic structural changes effected by modification of OPh to OAr(F). The compounds [K(18-crown-6)]2[Cu(OArF)4], 1a; [K(18-crown-6)]2[Cu(OAr')4], 1b; [Tl2Cu(OArF)4], 2a; [Tl2Cu(OAr')4], 2b; (Ph4P)2[Cu(OArF)4], 3; (nBu4N)2[Cu(OArF)4], 4; (HEt3N)2[Cu(OArF)4], 5; [K(18-crown-6)]2[Cu2(mu2-OC6H5)2(OC6H5)4], 6; [K(18-crown-6)]2[Co(OArF)4], 7a; [(18-crown-6)]2[Co(OAr')4], 7b; [Tl2Co(OArF)4], 8a; [Tl2Co(OAr')4], 8b; (Me4N)2[Co(OArF)4], 9; [Cp2Co]2[Co(OAr')4], 10; and [(18-crown-6)])[Co2(mu2-OC6H5)2(OC6H5)4], 11, have been characterized with UV-vis and multinuclear NMR spectroscopy and solution magnetic moment studies. Cyclic voltammetry was used to study 1a, 1b, 7a, and 7b. X-ray crystallography was used to characterize 1b, 3, 4, 5, 6, 7a, 7b, 10, and 11. The related [MX4]2- compound (Ph4P)2[Co(OArF)2Cl2], 12, has also been synthesized and characterized spectroscopically, as well as with conductivity and single-crystal X-ray diffraction. Use of fluorinated aryloxides permits synthesis and isolation of the mononuclear, homoleptic phenolate anions in good yield without oligomerized side products. The reaction conditions that result in homoleptic 1a and 7a with OArF upon changing the ligand to OPh result in mu2-OPh bridging phenoxides and the dimeric complexes 6 and 11. The [M(OArF)4]2- and [M(OAr')4]2- anions in 1a, 1b, 3, 4, 5, 7a, 7b, 9, and 10 demonstrate that stable, isolable homoleptic phenolate anions do not need to be coordinatively or sterically saturated and can be achieved by increasing the electronegativity of the ligand.     

Square-planar rhodium(I) complexes partnered with [arachno-6-SB(9)H(12)]- : a route toward the synthesis of new rhodathiaboranes and organometallic/thiaborane salts

Treatment of [RhCl(eta4-diene)]2 (diene = nbd, cod) with the N-heterocyclic ligands 2,2'-bipyridine (bpy), 4,4'-dimethyl-2,2'-bipyridine (Me2bpy), 1,10-phenanthroline (phen), and pyridine (py) followed by addition of Cs[arachno-6-SB9H12] affords the corresponding salts, [Rh(eta4-diene)(L2)][SB9H12] [diene = cod, L2 = bpy (1), Me2bpy (3), phen (5), (py)2 (7); diene = nbd, L2 = bpy (2), Me2bpy (4), phen (6), (py)2 (8)]. These compounds are characterized by NMR spectroscopy and mass spectrometry, and in addition, the cod-Rh species 1 and 3 are studied by X-ray diffraction analysis. These saltlike reagents are stable in the solid state, but in solution the rhodium(I) cations, [Rh(eta4-diene)(L2)]+, react with the polyhedral anion [SB9H12]- leading to a chemistry that is controlled by the d8 transition element chelates. The nbd-Rh(I) complexes react faster than the cod-Rh(I) counterparts, leading, depending on the conditions, to the synthesis of new rhodathiaboranes of general formulas [8,8-(L2)-nido-8,7-RhSB9H10] [L2 = bpy (9), Me2bpy (10), phen (11), (py)2 (12)] and [8,8-(L2)-8-(L')-nido-8,7-RhSB9H10] [L' = PPh3, L2 = bpy (13), Me2bpy (14), phen (15); L' = NCCH3, L2 = bpy (16), Me2bpy (17), phen (18)]. Compound 13 is characterized by X-ray diffraction analysis confirming the 11-vertex nido-structure of the rhodathiaborane analogues 14-18. In dichloromethane, 1 and 3 yield mixtures that contain the 11-vertex rhodathiaboranes 9 and 10 together with new species. In contrast, the cod-Rh(I) reagent 5 affords a single compound, which is proposed to be an organometallic rhodium complex bound exo-polyhedrally to the thiaborane cage. In the presence of H2(g) and stoichiometric amounts of PPh3, the cod-Rh(I) reagents, 1, 3, and 5, afford the salts [Rh(H)2(L2)(PPh3)2][SB9H12] [L2 = bpy (19), Me2bpy (20), phen (21)]. Similarly, in an atmosphere of CO(g) and in the presence of PPh3, compounds 1-6 afford [Rh(L2)(PPh3)2(CO)][SB9H12] (L2 = bpy (22), Me2bpy (23), phen (24)]. The structures of 19 and 24 are studied by X-ray diffraction analysis. The five-coordinate complexes [Rh(L2)(PPh3)2(CO)]+ undergo PPh3 exchange in a process that is characterized as dissociative. The observed differences in the reactivity of the nbd-Rh(I) salts versus the cod-Rh(I) analogues are rationalized on the basis of the higher kinetic lability of the nbd ligand and its faster hydrogenation relative to the cod diene.     

Transition metal-catalyzed [4 + 2 + 2] cycloadditions of bicyclo[2.2.1]hepta-2,5-dienes (norbornadienes) and bicyclo[2.2.2]octa-2,5-dienes

The transition-metal-catalyzed [4 + 2 + 2] cycloadditions of norbornadienes, bicyclo[2.2.2]octa-2,5-diene, and benzobarrelene with 1,3-butadienes proceed in excellent yields using cobalt-based catalytic systems. Two key distinctions between these [4 + 2 + 2] cycloadditions and the corresponding transition-metal-catalyzed [2 + 2 +2] reactions of norbornadiene are the requirement of a bimetal catalytic system with a bisphosphine ligand for the former and exclusive regioselectivity in the [4 + 2 + 2] reaction of 2-substituted norbornadienes to produce 1-substituted adducts. These distinctions may indicate two distinct mechanisms for the [4 + 2 + 2] and [2 + 2 + 2] reactions.     

Synthesis and reactivity of calix[4]arene-supported group 4 imido complexes

New mononuclear titanium and zirconium imido complexes [M(NR)(R'(2)calix)] [M=Ti, R'=Me, R=tBu (1), R=2,6-C(6)H(3)Me(2) (2), R=2,6-C(6)H(3)iPr(2) (3), R=2,4,6-C(6)H(2)Me(3) (4); M=Ti, R'=Bz, R=tBu (5), R=2,6-C(6)H(3)Me(2) (6), R=2,6-C(6)H(3)iPr(2) (7); M=Zr, R'=Me, R=2,6-C(6)H(3)iPr(2) (8)] supported by 1,3-diorganyl ether p-tert-butylcalix[4]arenes (R'(2)calix) were prepared in good yield from the readily available complexes [MCl(2)(Me(2)calix)], [Ti(NR)Cl(2)(py)(3)], and [Ti(NR)Cl(2)(NHMe(2))(2)]. The crystallographically characterised complex [Ti(NtBu)(Me(2)calix)] (1) reacts readily with CO(2), CS(2), and p-tolyl-isocyanate to give the isolated complexes [Ti[N(tBu)C(O)O](Me(2)calix)] (10), [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [Ti[N(tBu)C(O)N(-4-C(6)H(4)Me)](Me(2)calix)] (13). In the case of CO(2) and CS(2), the addition of the heterocumulene to the Ti-N multiple bond is followed by a cycloreversion reaction to give the dinuclear complexes 11 and 12. The X-ray structure of 13.4(C(7)H(8)) clearly establishes the N,N'-coordination mode of the ureate ligand in this compound. Complex 1 undergoes tert-butyl/arylamine exchange reactions to form 2, 3, [Ti(N-4-C(6)H(4)Me)(Me(2)calix)] (14), [Ti(N-4-C(6)H(4)Fc)(Me(2)calix)] (15) [Fc=Fe(eta(5)-C(5)H(5))(eta(5)-C(5)H(4))], and [[Ti(Me(2)calix)](2)[mu-(N-4-C(6)H(4))(2)CH(2)]] (16). Reaction of 1 with H(2)O, H(2)S and HCl afforded the compounds [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [TiCl(2)(Me(2)calix)] in excellent yields. Furthermore, treatment of 1 with two equivalents of phenols results in the formation of [Ti(O-4-C(6)H(4)R)(2)(Me(2)calix)] (R=Me 17 or tBu 18), [Ti(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (19) and [Ti(mbmp)(Me(2)calix)] (20; H(2)mbmp=2,2'-methylene-bis(4-methyl-6-tert-butylphenol) or CH(2)([CH(3)][C(4)H(9)]C(6)H(2)-OH)(2)). The bis(phenolate) compounds 17 and 18 with para-substituted phenolate ligands undergo elimination and/or rearrangement reactions in the nonpolar solvents pentane or hexane. The metal-containing products of the elimination reactions are dinuclear complexes [[Ti(O-4-C(6)H(4)R)(Mecalix)](2)] [R=Me (23) or tBu (24)] where Mecalix=monomethyl ether of p-tert-butylcalix[4]arene. The products of the rearrangement reaction are [Ti(O-4-C(6)H(4)Me)(2) (paco-Me(2)calix)] (25) and [Ti(O-4-C(6)H(4)tBu)(2)(paco-Me(2)calix)] (26), in which the metallated calix[4]arene ligand is coordinated in a form reminiscent of the partial cone (paco) conformation of calix[4]arene. In these compounds, one of the methoxy groups is located inside the cavity of the calix[4]arene ligand. The complexes 24, 25 and 26 have been crystallographically characterised. Complexes with sterically more demanding phenolate ligands, namely 19 and 20 and the analogous zirconium complexes [Zr(O-4-C(6)H(4)Me)(2)(Me(2)calix)] (21) and [Zr(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (22) do not rearrange. Density functional calculations for the model complexes [M(OC(6)H(5))(2)(Me(2)calix)] with the calixarene possessing either cone or partial cone conformations are briefly presented.     

Symmetry-based magnetic anisotropy in the trigonal bipyramidal cluster [Tp2(Me3tacn)3Cu3Fe2(CN)6]4+

Reaction of [(Me3tacn)Cu(H2O)2]2+ (Me3tacn = N,N',N' '-trimethyl-1,4,7-triazacyclononane) with [TpFe(CN)3]- (Tp- = hydrotris(pyrazolyl)borate) in a mixture of ethanol and acetonitrile affords the pentanuclear cluster [Tp2(Me3tacn)3Cu3Fe2(CN)6]4+. Single-crystal X-ray analysis reveals a trigonal bipyramidal structure featuring a D3h-symmetry core in which two opposing FeIII (S = 1/2) centers are linked through cyanide bridges to an equatorial triangle of three CuII (S = 1/2) centers. Fits to variable-temperature dc magnetic susceptibility data are consistent with ferromagnetic coupling to give an S = 5/2 ground state, while fits to low-temperature magnetization data indicate the presence of a large axial zero-field splitting (D = -5.7 cm-1). Frequency dependence observed in the ac magnetic susceptibility data confirms single-molecule magnet behavior, with an effective spin reversal barrier of Ueff = 16 cm-1. When compared with the much lower anisotropy barrier previously observed for the face-centered cubic cluster [Tp8(H2O)6Cu6Fe8(CN)6]4+, the results demonstrate the enormous influence of the geometry in which a given set of metal ions are arranged.     

Influence of hydrogen bonding on the assembly of six-membered vanadium borophosphate cluster anions: synthesis and structures of (NH4)2(C2H10N2)6[Sr(H2O)5]2[V2P2BO12](6)10H2O, (NH4)2(C3H12N2)6[Sr(H2O)4]2[V2P2BO12](6)17H2O, and (NH4)3(C4H14N2)4 5[Sr(H2O)5]2[Sr(H2O)4][V2P2BO12]6 10H2O

Three new strontium vanadium borophosphate compounds, (NH4)2(C2H10N2)6[Sr(H2O)5]2[V2P2BO12]6 10H2O (Sr-VBPO1) (1), (NH4)2(C3H12N2)6[Sr(H2O)4]2[V2P2BO12]6 17H2O (Sr-VBPO2) (2), and (NH4)3(C4H14N2)4.5[Sr(H2O)5]2[Sr(H2O)4][V2P2BO12]6 10H2O (Sr-VBPO3) (3) have been synthesized by interdiffusion methods in the presence of diprotonated ethylenediamine, 1,3-diaminopropane, and 1,4-diaminobutane. Compound 1 has a chain structure, whereas 2 and 3 have layered structures with different arrangements of [(NH4) [symbol: see text] [V2P2BO12]6] cluster anions within the layers. Crystal data: (NH4)2(C2H10N2)6[Sr(H2O)5]2[V2P2BO12]6 10H2O, monoclinic, space group C2/c (no. 15), a = 21.552(1) A, b = 27.694(2) A, c = 20.552(1) A, beta = 113.650(1) degrees, Z = 4; (NH4)2(C3H12N2)6[Sr(H2O)4]2[V2P2BO12]6 17H2O, monoclinic, space group I2/m (no. 12), a = 15.7618(9) A, b = 16.4821(9) A, c = 21.112(1) A, beta = 107.473(1) degrees, Z = 2; (NH4)3(C4H14N2)4.5[Sr(H2O)5]2[Sr(H2O)4] [V2P2BO12]6 10H2O, monoclinic, space group C2/c (no. 15), a = 39.364(2) A, b = 14.0924(7) A, c = 25.342(1) A, beta = 121.259(1) degrees, Z = 4. The differences in the three structures arise from the different steric requirements of the amines that lead to different amine-cluster hydrogen bonds.     

Synthesis of 3,5-diaryl-4-chlorophthalates by [4+2] cycloaddition of 1-ethoxy-2-chloro-1,3-bis(trimethylsilyloxy)-1,3-diene with dimethyl acetylenedicarboxylate and subsequent site-selective Suzuki-Miyaura reactions

The [4+2] cycloaddition of 1-ethoxy-2-chloro-1,3-bis(trimethylsilyloxy)-1,3-diene with dimethyl acetylenedicarboxylate (DMAD) afforded dimethyl 4-chloro-3,5-dihydroxyphthalate. Site-selective Suzuki-Miyaura reactions of its bis(triflate) provide a convenient approach to 3,5-diaryl-4-chlorophthalates containing two different aryl groups.     

Noncyclic [10-S-5] sulfuranide dioxide salts with three S-C bonds: a new class of stable hypervalent compounds

Phenyl triflate reacts with CF3SiMe3/Q+F- (Q+ = [K(18-crown-6)]+, Me4N+) and (Me2N)3S+Me3SiF2- to afford the first noncyclic [10-S-5] sulfuranide dioxide salts, [(CF3)3SO2]-Q+, with three S-C bonds, whose molecular structure was determined by X-ray crystallography.     

Cerium(III) dialkyl dithiocarbamates from [Ce[N(SiMe3)2]3] and tetraalkylthiuram disulfides, and [Ce(kappa2-S2CNEt2)4] from the Ce(III) precursor; Tb(III) and Nd(III) analogues

The synthesis and characterisation of the first neutral cerium dialkyl dithiocarbamate complexes, using a novel oxidative displacement of the amido ligands of [Ce[N(SiMe3)2]3] by tetraalkylthiuram disulfides [R2NC(S)S]2(R = Me, Et) in thf solution, are reported. In the absence of other donors, the complexes [Ce(kappa2-S2CNMe2)3(thf)2] and Ce(kappa2-S2CNEt2)3) 3 were obtained. The addition of a polypyridyl ligand allowed easy access to a range of complexes of general formula [Ce(kappa2-S2CNR2)3(L[intersection]L)][R = Me and L([intersection])L = 2,2'-bipy (4), or 4,7-diphenyl-1,10-phenanthroline (6); or R = Et and L[intersection]L = 2,2'-bipy (5)]. Brief exposure of the Ce(III) dithiocarbamate to oxygen gas afforded in high yield the diamagnetic, crystalline Ce(IV) dithiocarbamate [Ce(kappa2-S2CNEt2)4)] 7. The neodymium (8) and terbium (10) complexes, isoleptic with 2, were prepared from the appropriate 4f metal (Ln) bis(trimethylsilyl)amide [Ln[pN(SiMe3)2]3][Ln = Nd or Tb (9)] and [Me2NC(S)S]2. The structures of the crystalline complexes, 2, 4, 6, 7, 9 and 10 have been determined by X-ray crystallography. Some evidence has been obtained for the formation of the cerium(IV) complex Ce[N(SiMe3)2]2(kappa2-S2CNMe2)2. The cerium(IV) complex 7 has the metal coordinated to eight sulfur atoms of four planar chelating S2CNC2 moities and its geometry is intermediate between dodecahedral and square prismatic; the mean Ce-S bond length of 2.803 A in 7 compares with the 2.950 A in the Ce(III) complex 2.     

Synthesis and Crystal Structure of a Complex Bimetallic Salt [Ni(trans_[14]diene)] [Ni (mnt)_2]

1INTRoDUCTIONMacrocycliccoordinationcomPOundshavebeenwidelyinvestigatedinthepastdecadesbecauseoftheirrelationshiptocomplexesofbiologicalsignificancesuchasthePorphyrinsandcorrins(lJ.Structuresofmanymacrocycliccompoundshavebeenre-ported,especiallythecompoundscontainingN4macrocyclicligands"'.However,toourknowledge,onlyafewcrystalstructuresofcomplexbimetallicsaltscontainingmacrocyclicligandshavebeendeterminedbyX-raydiffractionmethod.Inthispa-per,werePortthesynthesisandstructureofthetit1ecom…     

Novel reactions of phosphorus(III) azides and isocyanates: unusual modes of cycloaddition with dipolarophiles and an unexpected case of ring expansion

New modes of 1,3-dipolar cycloaddition are uncovered by the isolation of [CH2(6-t-Bu-4-Me-C6H2O)2]P(C(CO2Me)C(CO2Me)N[NP(N3)(OC6H2-6-t-Bu-4-Me)2CH2]N) (3) and [CH2(6-t-Bu-4-Me-C6H2O)2]P(C(CO2Me)C(CO2Me)C(O)N) (4) on treating [CH2(6-t-Bu-4-Me-C6H2O)2]P-X [X = N3 (1) and NCO (2)] with the dipolarophile MeO2CC identical to CCO2Me; compound 4 undergoes an unprecedented ring expansion upon addition of 2-(methylamino)ethanol to afford the spirocycle [CH2(6-t-Bu-4-Me-C6H2O)2]P(OCH2CH2N(Me)CH(CO2Me)CH(CO2Me)C(O)N) (5).