应用酸性铬蓝K的A_N=0双波长补偿系数光度法测定铜(Ⅱ)

在pH=12.7的NaOH介质中,铜(Ⅱ)与酸性铬蓝K(ACBK)形成深红色配合物,应用该配合物生色对试剂ACBK褪色产生100%相消干扰的波长533 nm作为负峰波长,建立了ACBK测定铜(Ⅱ)的A_N=0双波长补偿系数光度法.该法能消除显色剂ACBK褪色对生成物Cu(ACBK)生色的相消干扰,测得生色法真实吸光度,消除生成物生色对有色剂ACBK褪色的相消干扰;测得褪色法近似真实吸光度,其灵敏度是上述两法之和.于波长λp 573 nm,λN 533 nm测得信号吸光度补偿系数fs为4.135,信号摩尔吸光系数为4.56×10~4 L·5moL~(-1)·5cm~(-1),是经典光度法的3.73倍.方法线性范围为0.02～1.60 mg·~(-1),配合物的摩尔比为Cu∶ACBK=1∶1.测定了某些水样中的铜(Ⅱ),并对方法进行了检验,回收率为96%～104%.     

探针体耐尔蓝(NB)与DNA结合反应研究

应用微相吸附-光谱修正(MPASC)新技术研究DNA与耐尔蓝(NB)探针分子间的相互作用,分析生物大分子内静电场的形成与Langmuir吸附的关联性,测定了结合产物结合比、平衡常数等.通过在pH=10.38介质中对DNA-NB反应的光谱分析,结果表明产物结合比NB∶ DNA-P=3∶ 1、平衡常数K=3.33×105,摩尔吸收系数ε660 nm=4.81×103 L/mol cm.样品分析表明DNA回收率95.6%～108%,相对标准偏差RSD=2.8%.     

茜素红与蛋白质分子Langmuir吸附聚集反应研究

在pH4.3的B-R缓冲体系中,用微相吸附-光谱修正技术[1]研究了茜素红(ARS)与牛血清白蛋白(BSA)、人血清白蛋白(HSA)的结合反应。其吸附结合常数分别为:KBSA-ARS=3.950×104,KHSA-ARS=4.377×104。染料与蛋白的最大结合数分别为NARS∶NBSA=9∶1,NARS∶NHSA=7∶1。经光谱修正技术计算结合产物的实际摩尔吸光系数分别为εBSA-ARS(537nm)=2.517×104L.mol-1.cm-1,εHSA-ARS(519nm)=2.051×104L.mol-1.cm-1,检出限BSA为19mg/L,HSA为23mg/L。经探讨该结合反应机理符合Langmuir吸附聚集反应方程。     

酶催化分光光度法测定盐酸甲氧氯普胺

试验发现血红蛋白(Hb)对酸性铬蓝K与过氧化氢的氧化褪色反应的催化作用因甲氧氯普胺的存在而受到抑制。此反应系在pH 9.5的氨性缓冲介质中进行,并根据在551 nm波长(为酸性铬蓝K在此条件下的吸收峰)处测得的吸光度A0(试剂空白溶液)、A1(加Hb溶液)及A2(加Hb和甲氧氯普胺溶液),按所给公式计算反应的抑制率(I%)。甲氧氯普胺的浓度在3.0×10-6~1.2×10-4mol·L-1范围内与所算得的抑制率呈线性关系。上述反应的检出限(3s/k)为2.8×10-8mol·L-1。浓度水平在4.0×10-5mol·L-1时,测得其相对标准偏差(n=11)为4.6%。根据以上方法,测定了药物针剂中甲氧氯普胺含量,测得结果与其标示值相符。     

酸性铬蓝K-H2O2-HRP伏安酶联免疫分析法测定HRP及其标记物

本文提出了一种新的辣根过氧化物酶(HRP)的底物--酸性铬蓝K(ACBK),它本身具有电化学活性,能够在汞电极上发生还原反应.以H2O2为氧化剂,HRP的加入能加快氧化反应的进行,使酸性铬蓝K被氧化分解,其平衡浓度降低,对应的还原峰电流降低,峰电流的降低值同HRP的加入量在8.0×10-8～1.0×10-6 g/mL之间呈线性关系.用于IgG-HRP的测定,最高稀释比为1∶5 000.     

铌-铬天青S与牛血清白蛋白结合反应及其应用

探讨了铌-铬天青S配合物与牛血清白蛋白(BSA)结合反应体系.在pH 4.6的邻苯二甲酸氢钾-NaOH(Clark-Lubs)缓冲溶液中,在OP存在下,铌-铬天青S配合物与牛血清白蛋白进一步形成复合物,其最大吸收峰位于595 nm,且随着BSA量的增加,体系在595 nm波长处吸收峰也随着增大.据此建立以铌-铬天青S配合物为光谱探针,分光光度法测定蛋白质含量的新方法.牛血清白蛋白含量在0～0.32 mg/mL的范围内符合比尔定律,摩尔吸光系数ε595为 4.4×105 L·mol-1·cm-1,相关系数为γ=0.9996,生物体内的常见物质基本上不干扰测定,方法可用于人血清蛋白中蛋白质的测定.     

共振光散射探针法测定壁画胶结材料中蛋白质含量

用酸性铬蓝K(ACBK)为共振光散射探针,对壁画含不同颜料的胶结材料中的蛋白质含量进行了定量测定在pit3．96乙酸-乙酸钠缓冲溶液条件下,在λ=345nm处,以生血清白蛋白(BSA)为标准样品绘制工作曲线测定敦煌壁画中含不同颜料的胶结材料中蛋白质结果分别为：白色颜料1．5361μg／mg;绿色颜料1．5714μg／mg：蓝色颜料1．6801μg／mg;棕色颜料1．8756μg／mg和红色颜料3．2673μg／mg．对BSA测定的线性范围为0．13～10．88μg／L。该方法简单、快速、灵敏度高,平行测定的相对标准偏差(RSD)为3．8％,蛋白质的加标回收率为95％～107％。     

卡络磺钠与牛血清蛋白荧光光谱的研究

采用荧光光谱法研究了卡络磺钠CSS (Carbazochrome Sodium Sulfonate)与牛血清蛋白(BSA)结合反应的特征, 测定了结合常数(K=1.32×105 L/mol) 和结合位点数(n=1.28). 依据Foster非辐射能量转移理论, 确定了给体-受体间的结合距离(r=4.896 nm)和能量转移效率, 采用同步荧光技术考察了CSS对BSA构象的影响.     

光谱法研究雷尼替丁与牛血清白蛋白的相互作用

运用荧光光谱和紫外-可见吸收光谱研究了雷尼替丁(Ran)与牛血清白蛋白(BSA)之间的相互作用.实验结果表明,Ran对BSA的内源荧光有较强的猝灭作用,猝灭机制为静态猝灭.测定了二者在不同温度下的表观结合常数KA,KA分别为5.64×105 L·mol-1(12℃)、5.38×105 L·mol-1(25℃)和5.15×105 L·mol-1(37℃),Ran与BSA以摩尔比1∶ 1结合.根据Frster非辐射能量转移理论,求出了37℃时给体(Ran)和受体(BSA)之间能量转移效率和结合距离分别为E=0.20和r=2.51nm.计算出的热力学参数表明,Ran和BSA之间的作用力主要是氢键和范德华力.利用同步荧光技术,研究了Ran对BSA构象的影响.     

催化分光光度法测定血红蛋白

基于血红蛋白的过氧化物酶特性,建立了一种测定血红蛋白的催化动力学光度分析法.在pH 9.5的缓冲溶液中,血红蛋白对过氧化氢氧化酸性铬蓝K反应体系的褪色作用明显加速.在最佳试验条件下,由于褪色作用的加速所引起的吸光度下降(△A)与血红蛋白的浓度在7.0×10-10～9.0×10-8 mol·L-1范围内呈线性关系.表观摩尔吸光率为3.9×108L·mol-1.cm-1,检出限为1.7×10-11mol·L-1.用于尿液中血红蛋白含量的测定,测定结果的相对标准偏差(n=5)在1.9%～4.2%之间,回收率在96.0%～102.0%之间.对此酶催化反应的机理也作了探讨.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.