The Effect of Electrochemical Modification of Activated Carbons by Polypyrrole on Their Structure Characteristics,Composition of Surface Compounds,and Adsorption Properties

The electrochemical modification of activated carbons (AC) by a conducting polymer polypyrrole (PPy) has a substantial effect on the AC structure characteristics, electrochemical properties, and adsorption activity with respect to natural substances (by the example of free hemoglobin). Using the method of standard contact porosimetry (SCP), the porous structure and hydrophilic–hydrophobic properties are studied for the activated carbon SKT-6A, the [SKT-6A/PPy/Cl^–] composite, and individual polypyrrole. The chemistry of the activated carbon surface is studied by the standardized Boehm method. It is shown that the nature of activated carbon and its initial surface substantially affect the character of its interaction with the conducting polymer polypyrrole. The effect of such modification on the AC surface chemistry should be considered in aggregate by taking into account each component of such modification. The increase in the sorption ability of [AC/PPy/Cl^–] composites with respect to hemoglobin is largely associated with the stronger hydrophilicity of polypyrrole as compared with activated carbons.     

基于导电聚吡咯生物电化学传感器的研究进展

导电聚合物具有良好的导电性能,可以作为分子导线使电子在生物活性物质与电极间直接传递,是构建生物传感器的一种新型材料.聚吡咯(PPy)具有导电性、生物相容性、易固定等特点,在传感器中用于固定生物活性物质有着良好的应用前景.该文简要介绍了导电聚吡咯的合成方法及掺杂机理,重点评述了聚吡咯用于固定生物活性物质构建生物传感器的多...     

Electrochemically Controlled Ion‐exchange Property of Carbon Nanotubes/Polypyrrole Nanocomposite in Various Electrolyte Solutions

The electrochemically controlled ion‐exchange properties of multi‐wall carbon nanotube (MWNT)/electronically conductive polypyrrole (PPy) polymer composite in the various electrolyte solutions have been investigated. The ion‐exchange behavior, rate and capacity of the electrochemically deposited polypyrrole with and without carbon nanotube (CNT) were compared and characterized using cyclic voltammetry (CV), chronoamperometry (CA), electrochemical quartz crystal microbalance (EQCM), X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). It has been found that the presence of carbon nanotube backbone resulted in improvement in ion‐exchange rate, stability of polypyrrole, and higher anion loading capacity per PPy due to higher surface area, electronic conductivity, porous structure of thin film, and thinner film thickness providing shorter diffusion path. Chronoamperometric studies show that electrically switched anion exchange could be completed more than 10 times faster than pure PPy thin film. The anion selectivity of CNT/PPy film is demonstrated using X‐ray photoelectron spectroscopy (XPS).     

Synthesis and characterization of a novel polyurethane/polypyrrole‐p‐toluenesulfonate (PU/PPy‐pTS) electroactive nanofibrous bending actuator

Electroactive actuators based on conductive polymers currently have attracted a great deal of attention. In this study, a nanofibrous structure of polypyrrole (PPy) was used to fabricate an electroactive bending actuator. For this purpose, polyurethane/PPy (PU/PPy) nanofibrous bending actuator was fabricated through the combined use of electrospinning and in‐situ chemical polymerization. The response surface methodology (RSM) was considered to find the optimal electrospinning conditions for producing PU nanofibers with the minimum diameter. The in‐situ chemical polymerization method was then used to prepare a conductive layer of PPy on the surface of optimum electrospun nanofibers with p‐toluenesulfonate (pTS) as the dopant. The coated nanofibers were used in the fabrication of PU/PPy‐pTS nanofibrous bending actuator. The morphology and electrical, thermal, electrochemical, and electrochemomechanical properties of the fabricated actuator were investigated. By using optimum conditions of electrospinning, PU nanofibers were obtained with a diameter of 221 nm. The results showed that the produced PU/PPy‐pTS nanofibers enjoy good thermal stability and have an electrical conductivity of about 276.34 S/cm. The obtained cyclic voltammetric and dynamo‐voltammetric responses showed that the dominant mechanism of actuation in the fabricated PU/PPy‐pTS nanofibrous actuator is the exchange of perchlorate anions with a partial exchange of lithium cations in 1M lithium perchlorate electrolyte solution. The fabricated actuator was capable of undergoing 141° reversible angular displacement during a potential cycle. The results demonstrated that, given high porosity, large specific surface area, flexibility, and desirable electrical properties, PU/PPy nanofibrous electroactive actuator provides a lot of potential for developing artificial muscle applications.     

The processing and properties of conductive polypropylene/polypyrrole composites

Polypropylene (PP) particles were chemically coated with polypyrrole (PPy). The content of polypyrrole varied from 0.8 to 7.6 wt.-%. Electrical conductivity of compression moulded samples depends on the concentration of polypyrrole and reached values from 4×10⁻¹⁰ to 5×10⁻³ S/cm, which is about 7 orders of magnitude higher than the conductivity in the blends prepared by mechanical mixing of PP and PPy in the same PPy concentration range. Highly conductive composites were also obtained from a mixture of coated and non-coated PP particles. The PP/PPy composites were characterized by elemental analysis, SEM and mechanical testing. The antistatic properties of PP/PPy composites were demonstrated. The electrical and mechanical properties depend on processing of composites.     

Preparation of submicron polypyrrole/poly(methyl methacrylate) coaxial fibers and conversion to polypyrrole tubes and carbon tubes

In an effort to prepare electrically conductive nanofiber and nanotube materials, polypyrrole/poly(methyl methacrylate) coaxial fibers have been prepared using polymer fibers produced from an electrospinning process. Poly(methyl methacrylate) (PMMA) fibers with an average diameter of 230 nm were initially fabricated by electrospinning as core materials. The PMMA fibers were subsequently coated as templates with a thin layer of polypyrrole (PPy) by in-situ deposition of the conducting polymer from aqueous solution. Hollow PPy tubes were produced by dissolution of the PMMA core from PPy/PMMA coaxial fibers. High-temperature (1000 degrees C) treatment under inert atmosphere converted PPy/PMMA coaxial fibers into carbon tubes by complete decomposition of PMMA fiber core and carbonization of the PPy wall. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and FT-IR spectroscopy confirmed the formation of the PPy/PMMA coaxial fibers, PPy tubes, and carbon tubes.     

Highly conductive free standing polypyrrole films prepared by freezing interfacial polymerization

Highly conductive free standing polypyrrole (PPy) films were prepared by a novel freezing interfacial polymerization method. The films exhibit metallic luster and electrical conductivity up to 2000 S cm(-1). By characterizing with SEM, FTIR, Raman and XRD, the high conductivity is attributed to the smooth surface, higher conjugation length and more ordered molecular structure of PPy.     

Electrochemistry of conductive polymers 37. Nanoscale monitoring of electrical properties during electrochemical growth of polypyrrole and its aging

Electrical and morphological properties of polypyrrole (PPy) films were studied during and after their electrochemical growth under various experimental conditions on a nanometer scale using a current-sensing atomic force microscope (CS-AFM). Of acetonitrile (ACN) solutions containing various amounts of water, one that contained 1.0% water produced the best quality films in their electrical and morphological properties in terms of homogeneities. The degree of doping, as well as time evolution of the film structure and its conductivity, of the PPy films was investigated during their growth in water and ACN with 1.0% water by obtaining the current images at a few designated growing stages, and the results were compared. Well-doped, conductive films were obtained from the very early stage during the electrodeposition of PPy in the ACN solution, while the films were poorly doped in water. As the film deposition progressed further in both aqueous and nonaqueous media, the doped areas spread over the whole surface leading to a more homogeneously conducting film. The current-voltage traces were obtained at each growing stage, which showed that the conductivity increases in both media as the PPy grows; the conductivity of the film grown in ACN is much higher than that of the film grown in water at all growing stages. The electrical properties of the PPy film deteriorated gradually upon exposure to air.     

New biocompatible polypyrrole-based films with good blood compatibility and high electrical conductivity

A novel O-butyryl chitosan (OBCS)-grafted polypyrrole (PPy) film was described. The immobilization was accomplished by photocrosslinking the OBCS onto PPy films under ultraviolet light irradiation. The surfaces of OBCS-grafted PPy film were characterized by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and electron spectroscopy for chemical analysis (ESCA). The blood compatibility of the OBCS-grafted PPy film was evaluated by platelet-rich plasma (PRP) contacting experiments and protein adsorption experiments in vitro. These results have demonstrated that the surface with immobilized OBCS shows much less platelet adhesive and fibrinogen adsorption compared to the control surface. The bulk conductivity values of PPy films were measured by a modified four-probe method. The composite films have both good blood compatibility and high electrical conductivity that make them suitable for using as potential biomaterials, such as electrically conducting blood vessel and functionally haemocompatible substrate of biosensor used directly in whole blood.     

Gas Sensing Ability of a Nanostructured Conducting Polypyrrole Film Prepared by Catalytic Electropolymerization on Cu/Au Interdigital Electrodes

Nanostructured conductive polypyrrole has been prepared electrochemically on the surfaces of Cu/Au interdigital electrodes in the presence of Fe(II) as catalyst and ClO₄^? as anion dopant by using constant potential amperometry and cyclic voltammetry. The morphology of the conducting films was examined by field emission scanning electron microscopy, indicating a dependence from the processing technique. The synthesized polymer was used to investigate the properties of the gas sensing ability. The effect of the catalyst concentration on the oxidation mechanism of pyrrole was discussed. The PPy‐ClO₄ gas sensors had demonstrated fast response time and high sensitivity to VOCs.     

吡咯在一些聚合物基质中聚合生成导电高分子复合物的研究

用电化学氧化聚合方法将吡咯在聚氨酯(PU)、聚已内酰胺(Nylon 6)、聚芳砜酰胺(PSu)及聚对苯二甲酰对苯二胺(PPTA)等绝缘聚合物中聚合生成聚吡咯(PP_y)的高分子复合物PU/PP_y、Nylon 6/PP_y、PS_u/PP_y、PPTA/PP_y等。它们具有良好的电导率及力学性能、报导了他们的制备方法及电导率、力学性能、电化学活性、扫描电镜、X-射线衍射的表征。     

聚吡咯/聚苯胺复合型导电聚合物防腐蚀性能

采用循环伏安法,在含吡咯和苯胺的0.3 mol/L草酸水溶液中制备了聚吡咯/聚苯胺(PPy/Pani)的复合型导电聚合膜。采用红外光谱、极化曲线、自腐蚀电位-时间曲线、扫描电子显微镜和电化学阻抗谱研究了共聚膜的防腐蚀性能。结果表明,在1 mol/L H2SO4中,PPy、Pani与不锈钢基体发生氧化还原反应,促进不锈钢表面发生钝化;当苯胺与吡咯浓度比为1∶3时,制备得到的复合型导电聚合膜所保护的不锈钢自腐蚀电流最小,自腐蚀电位最高,保护时间最长。PPy、Pani及其共聚膜在3.5%NaCl溶液中电化学阻抗谱表明,所制备的PPy、Pani及其共聚物膜与不锈钢基体发生氧化还原反应,使其表面钝化;当Cl-到达不锈钢表面时,破坏钝化膜导致不锈钢腐蚀。     

导电聚合物的电化学制备和电化学性质研究——中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(I)

简要介绍本研究组自上世纪80年代以来在导电聚合物的电化学制备和电化学性质研究中取得的一些主要成果,包括吡咯电化学聚合条件的影响、电化学聚合反应机理及其反应动力学、导电聚吡咯的两种掺杂结构及其两步电化学氧化还原过程和电化学过氧化的机理、导电聚苯胺的电化学性质、导电聚合物稳定性的电化学解释等等.     

Well-dispersed sulfur anchored on interconnected polypyrrole nanofiber network as high performance cathode for lithium-sulfur batteries

Preparation of novel sulfur/polypyrrole (S/PPy) composite consisting well-dispersed sulfur particles anchored on interconnected PPy nanowire network was demonstrated. In such hybrid structure, the as-prepared PPy clearly displays a three-dimensionally cross-linked and hierarchical porous structure, which was utilized in the composite cathode as a conductive network trapping soluble polysulfide intermediates and enhancing the overall electrochemical performance of the system. Benefiting from this unique structure, the S/PPy composite demonstrated excellent cycling stability, resulting in a discharge capacity of 931 mAh g⁻¹ at the second cycle and retained about 54% of this value over 100 cycles at 0.1 C. Furthermore, the S/PPy composite cathode exhibits a good rate capability with a discharge capacity of 584 mAh g⁻¹ at 1  C.     

Polypyrrole/poly(N‐isopropylacrylamide‐co‐acrylic acid) thermosensitive and electrically conductive composite microgels

The electrically conductive polypyrrole/dodecylbenzene sulfonic acid/poly(N‐isopropylacrylamide‐co‐acrylic acid) (PPy/DBSA/poly(NIPAAm‐co‐AA)) composite microgels were synthesized by a chemical oxidation of pyrrole in the presence of DBSA as the primary dopant, and poly(NIPAAm‐co‐AA) microgels as the polymeric codopant and template, in which APS was used as the oxidant. It was proposed to prepare “intelligent” polymer microgel particles containing both thermosensitive and electrically conducting properties. The polymerization of pyrrole took place directly inside the microgel networks, leading to formation of composite microgels and the morphology was observed by transmission electron microscope. PPy particles interacted strongly with microgels, as the acid groups of microgels acted as the polymeric codopant. The composite microgels thus formed showed electrically conducting behavior dependent on humidity and temperature. At temperatures lower than lower critical solution temperature, the conductivity decreased with increasing the humidity and a small hysteresis phenomenon was observed. The hysteresis became indistinct when temperature was near volume phase transition temperature. However, after the treatment of high temperature and high humidity, the conductivity increased surprisingly due to the structure reorganization inside the composite microgels. The distinctive functionality of the PPy composite microgels was expected to be utilized in many attractive applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1648–1659, 2006     

Conductive Composite Materials of Polyethylene and Polypyrrole with High Modulus and High Strength

Composite films of polyethylene (PE) and polypyrrole (PPy) were prepared by polymerization of PPy on an ultradrawn polyethylene film with high modulus and high strength in ferric chloride (FeCl₃) aqueous solution. The electrical conductivity of the composite film was found to be related to the polymerization conditions, such as polymerization temperature, polymerization time, the concentration and the oxidation potential of the FeCl₃ solution. Scanning electron microscopy, FTIR and ¹³C NMR spectra were used to elucidate the morphological and structural variations of PPy prepared under different conditions, which lead to the differences in the electrical properties of the resultant composite films. The best electrical conductivity of the composite was about 5.5 S/cm for the film prepared under optimum conditions. The Young's modulus and the tensile strength reached 80 GPa and 3.2 GPa, respectively, which indicated the successful production of a conductive polymer with high strength and high modulus.     

Preparation of conductive,flexible and transparent films by in situ deposition of polypyrrole nanoparticles on polyethylene terephthalate

In this study polypyrrole (PPy) nanoparticles were deposited as a thin film on the modified surface of polyethyleneterephthalate (PET) by in situ chemical polymerization in the presence of sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (DBSNa) and mixture of them as the surfactant. The surface of PET was modified by KOH before deposition and was investigated for conductivity and adhesion of PPy nanoparticles to PET. Resulting conductive flexible films were characterized by UV–Vis spectroscopy, fieldemission scanning electron microscopy, contact angle measurements and four-point-probe technique for conductivity. Direct morphological observation (FESEM) and electrical measurements indicated that the morphology, conductivity and the nature of deposited PPy films depend on surfactant, surface modification of PET and monomer concentration. In optimized process condition, uniform conductive films of PPy were obtained with good adhesion to PET.     

Preparation of hydrogel/conducting polymer composites

The electropolymerisation of a conducting electroactive polymer (polypyrrole) within a hydrogel matrix has been investigated. Using appropriate conditions a conductive electroactive polymer can be formed and the composite structure retains the hydration/rehydration properties of the hydrogel.     

Synthesis and Properties of Polypyrrole/Chitosan Composite Hydrogels

Conducting polymer hydrogels consisting of polypyrrole (PPy) and chitosan (CS) are prepared by static polymerization of pyrrole using methyl orange (MO) as the dopant and Fe₂(SO₄)₃ as the oxidant in the CS aqueous solution. PPy/CS composite hydrogels not only have good electrical conductivities, but also exhibit excellent swelling/deswelling behaviors due to the participation of one-dimensional conducting PPy blocks in the hydrogel network. The effects of the amount of the oxidant and ionic strength on the physical properties of PPy/CS composite hydrogels are studied in detail. The results show that PPy/CS composite hydrogels have improved water absorbencies in saline solutions compared with the conventional polyelectrolyte hydrogel.     

Surface (XPS,SIMS) chemical investigation on poly(pyrrole‐3‐acetic acid) films electrosynthesized on Ti and TiAlV substrates for the development of new bioactive substrates

Electropolymerization of pyrrole‐3‐acetic acid was performed by cyclic voltammetry on titanium and Ti90Al6V4 substrates with the aim of developing a multilayer structure for applications in advanced biomaterials. The polymeric films obtained were characterized by both XPS and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). Information on the poly(pyrrole‐3‐acetic acid) (PPy‐3‐acetic) surface structure was achieved by a detailed XPS analysis of C 1s and N 1s signals. The number of COOH groups was quantified by XPS coupled to a chemical derivatization reaction in which esterification with trifluoroethanol was exploited so that the presence of fluorine (or the CF₃ component in C 1s spectra) could be used as a marker for COOH groups. As a result, it was found that more than 90% of the monomer units along PPy‐3‐acetic chains bear carboxylic functionalities, of which 60% are protonated and 40% are present as carboxylate groups. Some decarboxylation occurs with film ageing. The PPy‐3‐acetic films were also investigated by ToF‐SIMS in the negative ion mode, thus obtaining, for the first time, interesting information on the structure of the top surface layers of a polymer belonging to the polypyrrole family. In particular, clusters of peaks related to PPy‐3‐acetic oligomers were detected and the decarboxylation phenomenon on top of the polymer surface was confirmed. Copyright © 2005 John Wiley & Sons, Ltd.