Organic electroluminescent device based on electropolymerized polybithiophene as the hole-transport layer

An ultrathin film of polybithiophene (PBTh), used in organic electroluminescent (EL) devices, was generated by an electrochemical method with a conducting indium tin oxide (ITO) glass as the working electrode. The light-emitting layer could be deposited directly onto the PBTh by using spin coating for fabrication of the organic EL devices. It was found that the film of PBTh as the hole-transport layer for the EL device could effectively raise the EL intensity and efficiency. The EL intensity of the ITO/PBTh/emitting layer/Al device is about 100 times as strong as that of the ITO/emitting layer/Al device at the same current density of 50 mA/cm².     

Electrochemical Biosensor Based on Nanoporous Au/CoO Core–Shell Material with Synergistic Catalysis

An ultrathin CoO layer is deposited on the skeleton surfaces of a nanoporous gold (NPG) film by using atomic layer deposition, creating a flexible electrode. Detailed characterization demonstrates the superior performance of the flexible NPG/CoO hybrids for electrochemical catalysis. The NPG/CoO hybrid not only achieves high catalytic activity for glucose oxidation and H₂O₂ reduction, but also exhibits a linear dependence of the electrical signal on the concentration of glucose and H₂O₂ molecules in the electrolyte. Meanwhile, the sensitivity for H₂O₂ reduction can be as high as 62.5 μA mm ^?1 cm^?2 with linear dependence on the concentration in the range of 0.1–92.9 mm . The high sensitivity is proposed to result from the synergistic effect of Au and CoO at the interfaces, and the high conductivity of the gold skeleton with a large surface area. The superior electrochemical performance of this hybrid electrode is promising for future potential applications in various transitional‐metal‐oxide‐based electrochemical electrodes.     

Efficient organic-inorganic hybrid cathode interfacial layer enabled by polymeric dopant and its application in large-area polymer solar cells

An organic-inorganic hybrid cathode interfacial layer(CIL) was developed by doping ZnO with the naphthalene-diimide based derivative NDI-PFNBr. It was found the resulting organic-inorganic hybrid CIL showed apparently improved conductivity and could act as an effective cathode interlayer to modify indium tin oxide(ITO) transparent electrodes. As a result, by employing the blend of PTB7-Th:PC71BM as the photoactive layer, the inverted polymer solar cells(PSCs) exhibited a remarkable enhancement of power conversion efficiency(PCE) from 8.52% for the control device to 10.04% for the device fabricated with the hybrid CIL. Moreover, all device parameters were simultaneously improved by using this hybrid CIL. The improved open-circuit voltage(VOC) was attributed to the reduced work function of the ITO cathode, whereas the enhancements in fill factor(FF) and short-circuit current density(JSC) were assigned to the increased conductivity and more effective charge extraction and collection at interface. Encouragingly, when the thickness of the hybrid CIL was increased to 80 nm, the resulting device could still keep a PCE of 8.81%, exhibiting less thickness dependence. Considering these advantages, 16 and 93 cm2large-area PSCs modules were successfully fabricated from the hybrid CIL by using doctor-blade coating techniques and yielded a remarkable PCE of8.05% and 4.49%, respectively. These results indicated that the hybrid CIL could be a promising candidate to serve as the cathode interlayer for high-performance large-area inverted PSCs.     

A Nanosheet-Assembled SnO2-Integrated Anode

There is an ever-increasing trend toward bendable and high-energy-density electrochemical storage devices with high strength to fulfil the rapid development of flexible electronics, but they remain a great challenge to be realised by the traditional slurry-casting fabrication processes. To overcome these issues, herein, a facile strategy was proposed to design integrating an electrode with flexible, high capacity, and high tensile strength nanosheets with interconnected copper micro-fibre as a collector, loaded with a novel hierarchical SnO₂ nanoarchitecture, which were assembled into core–shell architecture, with a 1D micro-fibre core and 2D nanosheets shell. When applied as anode materials for LIBs, the resultant novel electrode delivers a large reversible specific capacity of 637.2 mAh g⁻¹ at a high rate of 1C. Such superior capacity may benefit from rational design based on structural engineering to boost synergistic effects of the integrated electrode. The outer shell with the ultrathin 2D nanoarchitecture blocks can provide favourable Li⁺ lateral intercalation lengths and more beneficial transport routes for electrolyte ions, with sufficient void space among the nanosheets to buffer the volume expansion. Furthermore, the interconnected 1D micro-fibre core with outstanding metallic conductivity can offer an efficient electron transport pathway along axial orientation to shorten electron transport. More importantly, the metal’s remarkable flexibility and high tensile strength provide the hybrid integrated electrode with strong bending and stretchability relative to sintered carbon or graphene hosts. The presented strategy demonstrates that this rational nanoarchitecture design based on integrated engineering is an effective route to maintain the structural stability of electrodes in flexible LIBs.     

Self‐Stabilized and Strongly Adhesive Supramolecular Polymer Protective Layer Enables Ultrahigh‐Rate and Large‐Capacity Lithium‐Metal Anode

Constructing a solid electrolyte interface (SEI) is a highly effective approach to overcome the poor reversibility of lithium (Li) metal anodes. Herein, an adhesive and self‐healable supramolecular copolymer, comprising of pendant poly(ethylene oxide) (PEO) segments and ureido‐pyrimidinone (UPy) quadruple‐hydrogen‐bonding moieties, is developed as a protection layer of Li anode by a simple drop‐coating. The protection performance of in‐situ‐formed LiPEO–UPy SEI layer is significantly enhanced owing to the strong binding and improved stability arising from a spontaneous reaction between UPy groups and Li metal. An ultrathin (approximately 70 nm) LiPEO–UPy layer can contribute to stable and dendrite‐free cycling at a high areal capacity of 10 mAh cm^?2 at 5 mA cm^?2 for 1000 h. This coating together with the promising electrochemical performance offers a new strategy for the development of dendrite‐free metal anodes.     

Chemical Adsorption onto an ITO Substrate of Single‐Wall Carbon Nanotube Functionalized by Carboxylic Groups as an Efficient Support for Electrocatalyst

A single‐wall carbon nanotube functionalized by carboxylic groups (SWNT‐CA) was found to be adsorbed on an indium tin oxide (ITO) electrode by chemical interaction between carboxylic groups and the ITO surface. The adsorption experiments indicated that the narrow pH conditions (around pH 3.0) exist for its adsorption which is restricted by preparation of stable fluid dispersion (favorable at higher pH) and by the chemical interaction (favorable at lower pH). Atomic force microscopic (AFM) measurements suggest that fragmented SWNT‐CA are adsorbed, primarily lying on the surface. Electrochemical impedance analysis indicated that an electrochemical double layer capacitance of the SWNT‐CA/ITO electrode is considerably higher than that for the ITO electrode, suggesting that the interfacial area between the electrode surface and the electrolyte solution is enlarged by the SWNT‐CA layer. Pt particles were deposited as a catalyst on the bare ITO and SWNT‐CA‐coated ITO (SWNT‐CA/ITO) electrodes to give respective Pt‐modified electrodes (denoted as a Pt/ITO electrode and a Pt/SWNT‐CA/ITO electrode, respectively). The cathodic current for the Pt/SWNT‐CA/ITO electrode was 1.7 times higher than that for the Pt/ITO electrode at 0.0 V, showing that the Pt/SWNT‐CA/ITO electrode works more efficiently for O₂ reduction at 0.0 V due to the SWNT‐CA layer. The enhancement by the SWNT‐CA layer is also effective for electrocatalytic proton reduction. It could be ascribable to the enlarged interfacial area between the electrode surface and the electrolyte solution.     

Self-Stabilized and Strongly Adhesive Supramolecular Polymer Protective Layer Enables Ultrahigh-Rate and Large-Capacity Lithium-Metal Anode

Constructing a solid electrolyte interface (SEI) is a highly effective approach to overcome the poor reversibility of lithium (Li) metal anodes. Herein, an adhesive and self-healable supramolecular copolymer, comprising of pendant poly(ethylene oxide) (PEO) segments and ureido-pyrimidinone (UPy) quadruple-hydrogen-bonding moieties, is developed as a protection layer of Li anode by a simple drop-coating. The protection performance of in-situ-formed LiPEO–UPy SEI layer is significantly enhanced owing to the strong binding and improved stability arising from a spontaneous reaction between UPy groups and Li metal. An ultrathin (approximately 70 nm) LiPEO–UPy layer can contribute to stable and dendrite-free cycling at a high areal capacity of 10 mAh cm⁻² at 5 mA cm⁻² for 1000 h. This coating together with the promising electrochemical performance offers a new strategy for the development of dendrite-free metal anodes.     

Features of the occurrence of electrochemical processes in contact of sodium chloride solutions with the surface of superhydrophobic coatings on titanium

A joint analysis of the results of electrochemical studies and the evolution of the parameters of a sodium chloride solution droplet in contact with the coating under test reveals the pattern of changes in the surface state which result from the electrochemical reactions and adsorption-desorption processes at the coating/electrolyte interface. Features of the corrosion process are studied on titanium samples with different protective layers on the surface: (1) a natural oxide, (2) a coating prepared via plasma electrolytic oxidation (PEO coating), (3) a PEO coating with a hydrophobic layer, and (4) a PEO coating with a superhydrophobic nanocomposite layer. The best protective properties in a chloride-containing electrolyte are exhibited by the superhydrophobic nanocomposite coating. The mechanism of corrosion protection of this coating is formulated.     

Enhancing the performances of Li-ion batteries by carbon-coating: present and future

With progress of knowledge of electrode materials, it has been found that their surface structures are of great importance to the electrochemical performance of Li-ion batteries. Carbon coating can effectively increase the electrode conductivity, improve the surface chemistry of the active material, and protect the electrode from direct contact with electrolyte, leading to enhanced cycle life of the batteries. Carbon coating together with nanotechnology provides good conductivity as well as fast Li-ion diffusion, and thus also results in good rate capabilities. The recent development of carbon coating techniques in lithium-ion batteries is discussed with detailed examples of typical cathode and anode materials. The limitation of current technology and future perspective of the new concept of "hybrid coating" are also pointed out.     

SbOx+SnO2中间层对Ti/MnO2电极性能的影响

采用热分解方法制备了含SbO_x+SnO₂中间层的钛基二氧化锰电极. 在0.5 mol·L^-1 H₂SO₄溶液中对添加和没有添加SbO_x+SnO₂中间层的二氧化锰阳极进行了加速电解试验. 采用极化曲线和循环伏安曲线测量电极的析氯反应. 用循环伏安曲线和电化学阻抗谱来分析电极电解过程中内部结构和表面的变化. 结果表明, 二氧化锰阳极钝化失效的主要原因是绝缘的TiO₂层的生成和变厚. 引入中间层可以降低钛基体和活性涂层间的电阻, 并且在电解过程中, 可以显著延缓接触电阻的升高, 从而可以显著提高其寿命.     

Towards understanding the effects of carbon and nitrogen-doped carbon coating on the electrochemical performance of Li4Ti5O12 in lithium ion batteries: a combined experimental and theoretical study

We investigate the effects of carbon coating, with and without nitrogen-dopants, on the electrochemical performance of a promising anode material Li(4)Ti(5)O(12) (LTO) in lithium ion battery applications. The comparative experimental results show that LTO samples coated with nitrogen-doped carbon derived from pyridine and an ionic liquid exhibit significant improvements in rate capability and cycling performance compared with a LTO sample coated by carbon derived from toluene and the pristine LTO sample. For the first time, we construct an atomistic model for the interface between the lithium transition metal oxide and carbon coating layers. Our first-principles calculations based on density functional theory reveal that at this interface there is strong binding between the graphene coating layer and the Ti-terminated LTO surface, which significantly reduces the chemical activity of LTO surfaces and stabilizes the electrode/electrolyte interface, providing a clue to solve the swelling problem for LTO-based batteries. More importantly, electron transfer from the LTO surface to graphene greatly improves the electric conductivity of the interface. Nitrogen-dopants in graphene coatings further increase the interfacial stability and electric conductivity, which is beneficial to the electrochemical performance in energy storage applications.     

Mixed colloidal suspensions of reduced graphene oxide and layered metal oxide nanosheets: useful precursors for the porous nanocomposites and hybrid films of graphene/metal oxide

Homogeneously mixed colloidal suspensions of reduced graphene oxide, or RGO, and layered manganate nanosheets have been synthesized by a simple addition of the exfoliated colloid of RGO into that of layered MnO(2). The obtained mixed colloidal suspensions with the RGO/MnO(2) ratio of ≤0.3 show good colloidal stability without any phase separation and a negatively charged state with a zeta (ζ) potential of -30 to -40?mV. The flocculation of these mixed colloidal suspensions with lithium cations yields porous nanocomposites of Li/RGO-layered MnO(2) with high electrochemical activity and a markedly expanded surface area of around 70-100?m(2) g(-1). Relative to the Li/RGO and Li/layered MnO(2) nanocomposites (≈116 and ≈167?F?g(-1)), the obtained Li/RGO-layered MnO(2) nanocomposites deliver a larger capacitance of approximately 210?F?g(-1) with good cyclability of around 95-97?% up to the 1000th cycle, thus indicating the positive effect of hybridization on the electrode performances of RGO and lithium manganate. Also, an electrophoretic deposition of the mixed colloidal suspensions makes it possible to easily fabricate uniform hybrid films composed of graphene and manganese oxide. The obtained films show a distinct electrochemical activity and a homogeneous distribution of RGO and MnO(2). The present experimental findings clearly demonstrate that the utilization of the mixed colloidal suspensions as precursors provides a facile and universal methodology to synthesize various types of graphene/metal oxide hybrid materials.     

钌镧氧化物涂层在NaCl 溶液中的电化学阻抗谱(EIS)研究

测量了钌镧氧化物涂层的电化学阻抗谱(EIS), 结合循环伏安(CV)及扫描电子显微镜形貌分析, 研究了钌镧氧化物涂层阳极在3.5% NaCl 溶液中电化学表面结构及电化学行为. 在非析氯反应区间, 该涂层EIS 数据的最佳拟合等效电路是R_s(R_ctQ_dl), 在析氯反应区间, 其等效电路为R_s(R_fQ_f)(R_ctWQ_dl). 高频段阻抗行为对应涂层的物理阻抗, 低频段对应涂层与溶液界面的电化学反应阻抗. 实验结果表明, 随着La 浓度增加, 氧化膜及双电层的伪电容增大, 且在La 含量30mol%时达到最大值, 与CV实验结果一致, 证明了加入La 能提高RuO₂涂层的电催化活性. 但在析氯反应区间, 涂层氧化膜的导电性在含La 大于30 mol%之后迅速下降, 在低频段产生Warburg 阻抗, 与其表面钝化和特性吸附现象有关,这是导致含La 70 mol%时电催化活性急剧下降的原因.     

MnO2/TiN heterogeneous nanostructure design for electrochemical energy storage

MnO(2)/TiN nanotubes are fabricated using facile deposition techniques to maximize the surface area of the electroactive material for use in electrochemical capacitors. Atomic layer deposition is used to deposit conformal nanotubes within an anodic aluminium oxide template. After template removal, the inner and outer surfaces of the TiN nanotubes are exposed for electrochemical deposition of manganese oxide. Electron microscopy shows that the MnO(2) is deposited on both the inside and outside of TiN nanotubes, forming the MnO(2)/TiN nanotubes. Cyclic voltammetry and galvanostatic charge-discharge curves are used to characterize the electrochemical properties of the MnO(2)/TiN nanotubes. Due to the close proximity of MnO(2) with the highly conductive TiN as well as the overall high surface area, the nanotubes show very high specific capacitance (662 F g(-1) reported at 45 A g(-1)) as a supercapacitor electrode material. The highly conductive and mechanically stable TiN greatly enhances the flow of electrons to the MnO(2) material, while the high aspect ratio nanostructure of TiN creates a large surface area for short diffusion paths for cations thus improving high power. Combining the favourable structural, electrical and energy properties of MnO(2) and TiN into one system allows for a promising electrode material for supercapacitors.     

利用钛保护层在ITO电极上直接制备大面积的超薄氧化铝膜

通过磁控溅射并引入钛保护层, 利用在0.3 mol·L^-1硫酸中20 V电压下二次阳极氧化, 在氧化铟锡(ITO)导电玻璃衬底上直接制备了超薄(约140 nm, 为阳极氧化前Al厚度的一半)、大面积(约4 cm²)的多孔阳极氧化铝(AAO). 扫描电子显微镜结果表明生成的微孔与衬底垂直, 孔径和孔间距分别约为30和60 nm. 我们发现钛保护层的作用是提高了Al层的附着性并且防止ITO被腐蚀, 在此体系中钛不能被其它的金属如铬、金、银或铜代替. 紫外-可见光谱透过率结果显示在阳极氧化过程中Ti被氧化成为透明的TiO₂, 利用10-20 nm的钛保护层以及二次阳极氧化过程, 能够保证高透明度. 在ITO上直接制备的这种透明、有序的AAO纳米结构在光子学、光伏领域和纳米制备等方面具有潜在应用.     

Anion receptor-coated separator for lithium-ion polymer battery

Anion receptor-coated separators were prepared by coating poly(ethylene glycol) borate ester (PEGB) as an anion receptor and poly(vinyl acetate) (PVAc) as a good adhesive material towards electrodes onto microporous polyethylene (PE) separators. Gel polymer electrolytes were fabricated by soaking them in an liquid electrolyte, 1 M LiPF₆ in EC/DEC/PC (30/65/5, wt.%). As the weight ratio of PEGB to PVAc in a coating layer increased, gel polymer electrolytes showed higher cationic conductivity and electrochemical stability. The cationic conductivity and electrochemical stability of the gel polymer electrolyte based on coated separator with PVAc/PEGB (2/5, weight ratio) could reach 2.8 × 10^–4 S cm^–1 and 4.8 V, respectively. Lithium-ion polymer cells (LiCoO₂/graphite) based on gel polymer electrolytes with and without PEGB were assembled, and their electrochemical performances were evaluated.     

Microstructural impact of anodic coatings on the electrochemical chlorine evolution reaction

Sol-gel Ru(0.3)Sn(0.7)O(2) electrode coatings with crack-free and mud-crack surface morphology deposited onto a Ti-substrate are prepared for a comparative investigation of the microstructural effect on the electrochemical activity for Cl(2) production and the Cl(2) bubble evolution behaviour. For comparison, a state-of-the-art mud-crack commercial Ru(0.3)Ti(0.7)O(2) coating is used. The compact coating is potentially durable over a long term compared to the mud-crack coating due to the reduced penetration of the electrolyte. Ti L-edge X-ray absorption spectroscopy confirms that a TiO(x) interlayer is formed between the mud-crack Ru(0.3)Sn(0.7)O(2) coating and the underlying Ti-substrate due to the attack of the electrolyte. Meanwhile, the compact coating shows enhanced activity in comparison to the commercial coating, benefiting from the nanoparticle-nanoporosity architecture. The dependence of the overall electrode polarization behaviour on the local activity and the bubble evolution behaviour for the Ru(0.3)Sn(0.7)O(2) coatings with different surface microstructure are evaluated by means of scanning electrochemical microscopy and microscopic bubble imaging.     

Enhanced electrochemical activity of redox-labels in multi-layered protein films on indium tin oxide nanoparticle-based electrode

Facile electrical communication between redox-active labeling molecules and electrode is essential in the electrochemical detection of bio-affinity reactions. In this report, nanometer-sized indium tin oxide (ITO) particles were employed in the fabrication of porous thick film electrodes to enhance the otherwise impeded electrochemical activity of redox labels in multi-layered protein films, and to enable quantitative detection of avidin/biotin binding interaction. To carry out the affinity reaction, avidin immobilized on an ITO electrode was reacted with mouse IgG labeled with both biotin and ruthenium Tris-(2,2′-bipyridine) (Ru-bipy). The binding reaction between avidin and biotin was detected by the catalytic voltammetry of Ru-bipy in an oxalate-containing electrolyte. On sputtered ITO thin film electrode, although a single layer of Ru-bipy labeled avidin exhibited substantial anodic current, attaching the label to the outer IgG layer of the avidin/biotin-IgG binding pair resulted in almost complete loss of the signal. However, electrochemical current was recovered on ITO film electrodes prepared from nanometer-sized particles. The surface of the nanoparticle structured electrode was found by scanning electron microscopy to be very porous, and had twice as much surface binding capacity for avidin as the sputtered electrode. The results were rationalized by the assumption of different packing density of avidin inner layer on the two surfaces, and consequently different electron transfer distance between the electrode and Ru-bipy on the IgG outer layer. A linear relationship between electrochemical current and IgG concentration was obtained in the range of 40-4000 nmol L⁻¹ on the nanoparticle-based electrode. The approach can be employed in the electrochemical detection of immunoassays using non-enzymatic redox labels.     

Improving the adhesion of polymethacrylate thin films onto indium tin oxide electrodes using a silane-based ��Molecular Adhesive��

Indium tin oxide (ITO) is the most commonly used transparent conducting substance. It has been used in numerous applications such as light-emitting diodes. In most applications and studies, the ITO surface is further coated with additional layers. The interface between the ITO and the coating is of utmost importance since it affects the physical and chemical properties of the final device. Improving the adhesion between ITO and a coating layer can be achieved by applying a ??molecular adhesive?? as an inter-phasing molecular layer. In this study, we used 3-(trimethoxysilyl)propyl methacrylate as a ??molecule adhesive?? for better connection between ITO and a polymethacrylate layer. The samples were studied by electrochemistry, contact angle goniometry, atomic force microscopy, and nano scratch microscopy. These studies clearly show that a simple silanization process formed a thin molecular adhesive layer, which did not influence the physical and chemical properties of the final coated electrode and at the same time increased significantly the adhesion between the ITO and the polymethacrylate coating.     

Improving the adhesion of polymethacrylate thin films onto indium tin oxide electrodes using a silane-based “Molecular Adhesive”

Indium tin oxide (ITO) is the most commonly used transparent conducting substance. It has been used in numerous applications such as light-emitting diodes. In most applications and studies, the ITO surface is further coated with additional layers. The interface between the ITO and the coating is of utmost importance since it affects the physical and chemical properties of the final device. Improving the adhesion between ITO and a coating layer can be achieved by applying a “molecular adhesive” as an inter-phasing molecular layer. In this study, we used 3-(trimethoxysilyl)propyl methacrylate as a “molecule adhesive” for better connection between ITO and a polymethacrylate layer. The samples were studied by electrochemistry, contact angle goniometry, atomic force microscopy, and nano scratch microscopy. These studies clearly show that a simple silanization process formed a thin molecular adhesive layer, which did not influence the physical and chemical properties of the final coated electrode and at the same time increased significantly the adhesion between the ITO and the polymethacrylate coating.