Design and development of radio frequency output window for circular electron–positron collider klystron

This paper presents the first phase of design, analysis, and simulation for the klystron coaxial radio frequency(RF)output window. This study is motivated by 800 kW continuous wave(CW), 650 MHz klystrons for the future plan of circular electron–positron collider(CEPC) project. The RF window which is used in the klystron output section has a function to separate the klystron from the inner vacuum side to the outside, and high RF power propagates through the window with small power dissipation. Therefore, the window is a key component for the high power klystron. However, it is vulnerable to the high thermal stress and multipacting, so this paper presents the window design and analysis for these problems. The microwave design has been performed by using the computer simulation technology(CST) microwave studio and the return loss of the window has been established to be less than-90 d B. The multipacting simulation of the window has been carried out using MultiPac and CST particles studio. Through the multipacting analysis, it is shown that with thin coating of TiN, the multipacting effect has been suppressed effectively on the ceramic surface. The thermal analysis is carried out using ANSYS code and the temperature of alumina ceramic is lower than 310 K with water cooling.The design result successfully meets the requirement of the CEPC 650 MHz klystron. The manufacturing and high power test plan are also described in this paper.     

Design of a new pseudospark-produced high-brightness electron beam source

Ｄｅｓｉｇｎｏｆａｎｅｗｐｓｅｕｄｏｓｐａｒｋ－ｐｒｏｄｕｃｅｄｈｉｇｈ－ｂｒｉｇｈｔｎｅｓｓｅｌｅｃｔｒｏｎｂｅａｍｓｏｕｒｃｅＺＨＵＪｕｎｂｉａｏ；ＷＡＮＧＭｉｎｇｃｈａｎｇ；ＷＡＮＧＺｈｉｊｉａｎｇ（ＳｈａｎｇｈａｉｉｎｓｔｉｔｕｔｅｏｆＯｐｔ...     

Design and performance of a video-based laser beam automatic alignment system

A laser alignment system is applied to a high power laser facility for inertial confinement fusion. A design of the automated, close-loop laser beam alignment system is described. Its function is to sense beam alignment errors in a laser beam transport system and automatically steer mirrors preceding the sensor location as required to maintain beam alignment. The laser beam is sampled by a sensor package, which uses video cameras to sense pointing and centering errors. The camera outputs are fed to a personal computer, which includes video digitizers and uses image storage and software to sense the centroid of the image. Signals are sent through the computer to a stepper motor controller, which drives stepper motors on mirror mounts preceding the beam sampling location to return the beam alignment to the prescribed condition. Its optical principles and key techniques are given. The pointing and centering sensitivities of the beam alignment sensor package are analyzed. The system has been verified on the     

Axially magnetized electron–positron and electron plasma competition on the self focusing of intense laser beam

The spot-size evolution of circularly polarized intense laser beam propagating through the axially magnetized electron–positron (EP) and electron plasmas is discussed, in mildly relativistic and weakly non-linear (a² ? 1) regime. The non-linear current density source terms are obtained by making used of the perturbative technique. The variational principle approach method is applied to the solution of the non-linear Schrodinger wave equation. It is shown that the laser beam spot size decreases for the left and increases for the right handed polarized beams with increasing the external magnetic field, owing to the beam passages inside the electron plasma. Furthermore, it is revealed that the self focusing property strongly enhanced in the EP plasma in comparison to the electron plasma. Moreover, self focusing of linearly polarized laser beam is investigated for EP plasma by superposition of the right and left circularly polarized beams.     

Design and construction of the first prototype ionization chamber for CSNS and PA beam loss monitor （BLM） system

Design and construction of the first prototype ionization chamber for CSNS and Proton Accelerator （PA） beam loss monitor （BLM） system is reported. The low leakage current （〈0.1 pA）, good plateau （≈800 V） and linearity range up to 200 Roentgen/h are obtained in the first prototype. All of these give us good experience for further improving the ionization chamber construction.     

Dependence of the beam–channel interaction force on the radial profiles of a relativistic electron beam and an ion channel in the ion-focusing regime

Technical Physics - We have derived the formulas for calculating the force of the interaction of a relativistic electron beam with an ion plasma channel in the case of the beam transportation...     

Design of the thermal neutron detection system for CJPL-Ⅱ

A low background thermal neutron flux detection system has been designed to measure the ambient thermal neutron flux of the second phase of the China Jinping Underground Laboratory(CJPL-Ⅱ),right after completion of the rock bolting work.A ~3He proportional counter tube combined with an identical ~4He proportional counter tube was employed as the thermal neutron detector,which has been optimised in energy resolution,wall effect and radioactivity of construction materials for low background performance.The readout electronics were specially designed for long-term stable operation and easy maintenance in an underground laboratory under construction.The system was installed in Lab Hall No.3 of CJPL-Ⅱ and accumulated data for about 80 days.The ambient thermal neutron flux was determined under the assumption that the neutron field is fully thermalized,uniform and isotropic at the measurement position.     

Design of a MeV ultra-fast electron diffraction experiment at Tsinghua university

Time-resolved MeV ultra-fast electron diffraction (UED) is a powerful tool for structure dynamics studies. In this paper, we present a design of a MeV UED facility based on a photocathode RF gun at Tsinghua University. Electron beam qualities are optimized with numerical simulations, indicating that resolutions of 250 fs and 0.01 AA, and bunch charge exceeding 10⁵ electrons are expected with technically achievable machine parameters. Status of experiment preparation is also presented.     

Optimized electron–optical system of a static mass-spectrometer for simultaneous isotopic and chemical analysis

A new approach to control the linear dimensions of analytical electrophysical systems is suggested. This approach uses the lens properties of electron–optical elements with a curvilinear axis. It is shown that such an approach can be effectively applied, in particular, to synthesize ion–optical systems (IOSs) for static magnetic mass spectrometers and can be implemented owing to off-axis fundamental points, the “poles” of an electron–optical system, introduced earlier by one of the authors. The capabilities of the new approach are demonstrated with the synthesis of the IOS of a static mass spectrometer dedicated for isotopic and chemical analysis with an increased resolution. A new IOS not only provides desired high ion–optical parameters at decreased dimensions of the mass spectrometer as a whole but also makes it possible to loosen requirements for the manufacturing accuracy of IOS main elements.     

On the phase diagram of a two-dimensional electron–hole system

The phase diagram for a system of spatially separated electrons and holes in coupled quantum wells or graphene double layers is studied in the framework of a BCS-like mean-field approach and a Landau expansion in terms of the pairing order parameter. We find a second order transition between an electron–hole plasma and a BCS phase, as well as a first-order transition between the BCS phase and a bosonic Mott phase of tightly bound electron–hole pairs without phase coherence. The electron–hole plasma exists at low and at high densities for weak interaction, the BCS phase at moderate density and the Mott phase at high density and strong interaction.     

Modification of the titanium film–aluminum substrate system by a high-intensity pulsed electron beam with a submillisecond duration

Numerical simulation of the thermal processes that occur during doping of an Al surface with titanium by the method of liquid-phase mixing of a film–substrate system using an intense pulsed electron beam is carried out. As a result of our studies, it is shown that melting of the Ti-film–Al-substrate system makes it possible to form a multiphase submicrocrystalline structure with high strength and tribological properties in the surface layer.     

Design of magnet and control of the beam emittance for Penning H－ ion source

The design requirement and principle of the deflection magnet for Magnetron and Penning H^－ ion source are discussed. It is proved that there exists a maximum emittance for the beam that may be transformed by the magnet into a state with equal Twiss parameters of α_r=α_y and β_r=β_y, which is the requisite condition to get a minimum emittance at the entrance of RFQ after transporting by a LEBT with solenoids. For this maximum emittance, the corresponding magnetic field gradient index is 1.     

Percolation and the electron–electron interaction in an array of antidots

A square lattice of microcontacts with a period of 1 μm in a dense low-mobility two-dimensional electron gas is studied experimentally and numerically. At the variation of the gate voltage V _g , the conductivity of the array varies by five orders of magnitude in the temperature range T from 1.4 to 77 K in good agreement with the formula σ(V _g ) = (V _g ?V _g ^* (T))^β with β = 4. The saturation of σ(T) at low temperatures is absent because of the electron–electron interaction. A random-lattice model with a phenomenological potential in microcontacts reproduces the dependence σ(T, V _g ) and makes it possible to determine the fraction of microcontacts x(V _g , T) with conductances higher than σ. It is found that the dependence x(V _g ) is nonlinear and the critical exponent in the formula σ ∝ ? (x - 1/2) ^t in the range 1.3 < t(T, V _g ) < β.     

Design and implementation of the detector control system for the BESⅢ drift chamber cosmic ray test

After the construction of the BESⅢ drift chamber,a long period of cosmic rays test is necessary to verify its performance.This also provides a good opportunity to integrate the detector readout electronics and Detector Control System (DCS) into a unified working system.The goal of the DCS is to guarantee reliable physics data quality and the safe operation of the detector.It monitors and controls the HV,gas,VME crates and the environmental variables.The upper-level system is mainly developed from LabVIEW and the lower-level system mainly uses MCU and PLC technology.The system is designed to be highly flexible and scalable so that it can be applied to other detectors with little or no change.In the immediate future,it will be integrated into the entire BESⅢ Slow Control System.     

Design and implementation of the detector control system for the BESⅢ drift chamber cosmic ray test

After the construction of the BESⅢ drift chamber, a long period of cosmic rays test is necessary to verify its performance. This also provides a good opportunity to integrate the detector readout electronics and Detector Control System (DCS) into a unified working system. The goal of the DCS is to guarantee reliable physics data quality and the safe operation of the detector. It monitors and controls the HV, gas, VME crates and the nvironmental variables. The upper-level system is mainly developed from LabVIEW and the lower-level system mainly uses MCU and PLC technology. The system is designed to be highly flexible and scalable so that it can be applied to other detectors with little or no change. In the immediate future, it will be integrated into the entire BESⅢ Slow Control System.     

Design of “Eye Closure” system for the stealth of photo-electric equipments

Based on the optical activity of liquid crystal, a new approach for the stealth of “cat’s eye” targets is proposed in this paper. It imitates the physiological close reaction of human eyes when strong light irradiates eyes. With this approach, the “cat’s eye” effect will vanish, which is applied in restricting photo-electric equipments being detected and located by active laser detection system. The structure and working principle of the design are presented. The drive circuit is given to control the optical switch automatically. Feasibility of this design is demonstrated by experimental method. The measured data illustrate that the proposed approach is effective to eliminate the “cat’s eye” effect, so as to enhancing the viability of photo-electric equipments on the battlefield.     

Generation of femtosecond X-ray pulses via laser–electron beam interaction

The generation of femtosecond X-ray pulses will have important scientific applications by enabling the direct measurement of atomic motion and structural dynamics in condensed matter on the fundamental time scale of a vibrational period. Interaction of femtosecond laser pulses with relativistic electron beams is an effective approach to generating femtosecond pulses of X-rays. In this paper we present recent results from proof-of-principle experiments in which 300 fs pulses are generated from a synchrotron storage ring by using an ultrashort optical pulse to create femtosecond time structure on the stored electron bunch. A previously demonstrated approach for generating femtosecond X-rays via Thomson scattering between terawatt laser pulses and relativistic electrons is reviewed and compared with storage-ring based schemes.     

Synthetic applications and methodology development of Chan–Lam coupling: a review

Chan–Lam coupling is one of the most popular and easy methods to perform arylation of amines (N-arylations). This cross-coupling is generally performed by reacting aryl boronate derivatives with a variety of substrates involving nitrogen containing functional groups such as amines, amides, ureas, hydrazine, carbamates. This article summarizes the synthetic applications of this reaction and the efforts of scientists to develop novel and efficient methodologies for this reaction.

     

Diagnostic system for two dimension intensity distribution of laser beam

The diagnostic system for two dimension(2-D)intensity distribution of laserbeam is a measuring instrument for many parameters of laser beam.2-D intensity distributionplot of laser beam is obtained by the two dimension scanning mirror which is controlled by amicrocomputer to scan the laser beam on a detector.Many parameters of laser beam such asthe isointensity distribution plot,the beam diameter,the beam waist diameter,the laser pow-er,the diverge angle and the beam brightness,are given by means of the microcomputer pro-cessing the data measured.Theoretical analysis of beam parameter transform is given.