Thermal and ion-exchange studies on chelating terpolymer resins derived from o cresol urea formaldehyde

Terpolymers prepared by condensation of o cresol and urea with formaldehyde in presence of acid catalyst (2 M HCl) proved to be selective chelating ion exchange resins for certain metal ions. The molecular weights of the synthesised terpolymers were determined by GPC Technique. TGA analysis was employed to study the thermal stability and the kinetic data like activation energy of the terpolymer resins. Chelation ion exchange properties of these terpolymers were studied for Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ ions. A batch equilibrium method was employed in the study of the selectivity of metal ion uptake involving the measurements of distribution of a given metal ion between the polymer samples. The study was carried out over a wide pH range and in media of various ionic strengths.     

o-Cresol,thiourea and formaldehyde terpolymer – A cation exchange resin

o-Cresol–thiourea–formaldehyde terpolymer resin was synthesized through the condensation of o-cresol and thiourea with formaldehyde in the mole ratio 1:3:5 in the presence of 2 M hydrochloric acid as a catalyst. The resulting copolymer was characterized with IR and ¹H NMR spectral data. The average molecular weight of the resin was determined by Gel permeation chromatography. Thermal study of the resin was carried out to calculate the activation energy (Ea), enthalpy of activation (H³), entropy of activation (S³), free energy of activation (G³), and pre-exponential factor (A) of various steps of thermal decomposition of the terpolymer. The Dharwadkar and Kharkhanavala method has been used to calculate thermal activation energy and thermal stability. The chelation ion-exchange properties were also studied with the batch equilibrium method. The chelation ion-exchange properties of the copolymer was studied for Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ ions. The resin was proved to be selective chelating ion-exchange copolymer for certain metals. The study was carried out over a wide pH range and in media of various ionic strengths.     

Synthetic functionalized terpolymeric resin for the removal of hazardous metal ions: synthesis,characterization and batch separation analysis

An effectual functionalized synthetic resin involving anthranilic acid/4‐nitroaniline/formaldehyde was synthesized for the detoxification of hazardous metal ions. The resin was characterized by Fourier transform infrared, ¹H, and ¹³C nuclear magnetic resonance spectroscopy, and its morphology was established through scanning electron microscope and X‐ray diffraction. The resin was analyzed by thermogravimetric analysis to assess the thermal stability, in which the resin could be used in high temperature aqueous solutions for the elimination of harmful metal ions. The ion‐exchange property of the resin was evaluated by batch technique for specific metal ions viz. Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Pb²⁺. The study was extended to three variations such as effect of metal ion uptake in the presence of various electrolytes in different concentrations, effect of pH, and effect of contact time. The outcome proved that the resin can be used as a strong cation‐exchanger to remove various metal ions from the solutions. The resin could be regenerated and reused with quantitative recovery of metal ions for few cycles. On comparison with the earlier reported resins, the synthesized resin has found excellent capability of metal ion recovery. The resin possesses an utmost ion‐exchange capacity, which is in good harmony with isotherm models and kinetics. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and Properties of a Chelating Resin Containing a Salicylaldimine Group

Abstract

A phenol-formaldehyde polymer, poly(salicylaldehyde 3,5-diylmethylene) was synthesized and characterized. A chelating ionexchange resin was obtained by reacting the polymer with nbutylamine. The chelation characteristics of the chelate-forming resin was studied by a batch equilibration technique. The resin showed fast rates of metal ion uptake and was found to selectively chelate Cu²⁺ and Cd²⁺ ions with capacities up to 3.56 mmol/g over a pH range of 5–8.     

Thermal Decomposition of Chloromethylated Poly(styrene)-PAN Resin and Its Complexes with Some Transition Metal Ions

The complexes formed by the chemically modified chloromethylated poly(styrene)-PAN (CMPS-PAN) as a resin chelating ion exchanger were characterized by infrared and potentiometry. The thermal degradation of pure CMPS-PAN resin and its complexes with Au³⁺, Cr³⁺, Cu²⁺, Fe³⁺, Mn²⁺ and Pt⁴⁺ in air atmosphere has been studied using thermal gravimetry (TG) and derivative thermal gravimetry (DTG). The results showed that four different steps accompany the decomposition of CMPS-PAN resin and its complexes with the metal ions. These stages were affected by the presence of the investigated metal ions. The thermal degradation of CMPS-PAN resin in the presence of the ions showed different stability of the resin in the following decreasing order: Au³⁺>Pt⁴⁺>Mn²⁺>Cu²⁺>Cr³⁺>Fe³⁺. On the basis of the applicability of a non-isothermal kinetic equation, the decomposition process was a first-order reaction. The activation energy, Ea, the entropy change, ΔS ^*, the enthalpy change, ΔH ^* and the Gibbs free energy of activation, ΔG ^* were calculated by applying the theory of the reaction rates. The effect of the different central metal ions on the calculated thermodynamic activation parameters was discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Complexation of 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Mg2+, Ca2+, Mn2+, Fe3+, Fe2+, Co2+, Ni2+, Cu2+, and Zn2+ ions in aqueous solution

In a search for environmental-friendly metal chelating ligands for industrial applications, the protonation and complex formation equilibria of 3-hydroxy-2,2′-iminodisuccinic acid with Mg²⁺, Ca²⁺, Mn²⁺, Fe³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ ions in aqueous 0.1 mol L^?1 NaCl solution were studied at 25°C by potentiometric titration. The model for complexation and the stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. In all cases, complex formation was dominated by stable ML ^{n ?4} complexes.     

A new chelating resin containing 2-aminothiophenol: Synthesis characterization and determination of mercury in waste water using <Superscript>203</Superscript>Hg radiotracer

A new stable chelating resin was synthesized by incorporating 2-aminothiophenol into Merrifield polymer through C-N covalent bond and characterized by elemental analysis, IR and thermal study. The sorption capacity of the newly formed resin for Hg²⁺ as a function of pH has been studied using ²⁰³Hg radioisotope. The resin exhibits no affinity to alkali or alkaline earth metal ions and common anions. The separation of mercury(II) in presence of different alkali and alkaline earth metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), common anions (ClO₄ ⁻, SO₄ ²⁻) and other diverse ions (Ag⁺, Cu²⁺, Pb²⁺, Fe³⁺, Ni²⁺ and Zn²⁺) has been checked. In column operation it has been observed that Hg²⁺ content of the waste water can be removed at usual pH of natural water. Mercury was determined by isotope dilution method and the concentration of Hg²⁺ in the waste water spiked with ²⁰³Hg was found to be 0.05 to 0.09 μg/ml.     

Synthesis and Chelating Properties of Polystyrene Supported Schiff Base (N,N′-disalicylidenepropylenetriamine) Resin Toward Some Divalent Metal Ions

A new polystyrene-supported Schiff base resin, N,N-bis(salicylidenepropylenetriamine)- aminomethyl polystyrene, has been synthesized through a reaction between the commercially available 4-chloromethyl polystyrene polymer and the Schiff base, N,N′-disalicylidenepropylenetriamine. The chelation behavior of this resin toward the divalent metal ions Cu^{2 +}, Ni^{2 +}, Zn^{2 +}, and Pb^{2 +} in aqueous solutions was investigated. Batch equilibration experiments were carried out as a function of contact time, pH, amount of metal-ion, polymer mass, and temperature. The amount of metal-ion uptake of the polymers was determined by using atomic absorption spectrometry (AAS). Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Cu^{2 +} and that the metal-ion uptake follows the order: Cu^{2 +} > Zn ^{2 +} > Ni^{2 +} > Pb²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed.     

Complexation of metal ion with poly(1-vinylimidazole) resin prepared by radiation-induced polymerization with template metal ion

Poly(1-vinylimidazole) (PVI) resin was prepared with Ni²⁺, Co²⁺, or Zn²⁺ as a template to study the adsorption of metal ions. The metal-1-vinylimidazole complex was copolymerized and crosslinked with 1-vinyl-2-pyrrolidone by γ-ray irradiation and the template metal ion was removed by treating the polymer complex with an acid. These PVI resins adsorbed metal ions more effectively than the PVI resin prepared without the template. The number of adsorption sites (As) and the stability constant (K) of Ni²⁺ complex were larger for the PVI resin prepared with the Ni ion template, caused by the smaller dissociation rate constant of Ni ion from the resin. The composition of the Ni²⁺ complex in the resin remained constant. This suggests that the complexation proceeded via a one-step mechanism.     

Application of Chitosan Functionalized with 8-Hydroxyquinoline: Determination of Lead by Flow Injection Flame Atomic Absorption Spectrometry

This work describes the application of chitosan – chemically modified with 8-hydroxyquinoline – in a simple and efficient preconcentration system using flow injection flame atomic absorption spectrometry (FI-FAAS) for the determination of Pb²⁺ ions. The efficiency of the chelating resin and the accuracy of the proposed method were evaluated by the metal ion recovery technique in samples of mineral water, potable water and lake water. The recovery of Pb²⁺ ions from spiked solutions was less than 70% due to matrix effects, which were eliminated by addition of Ba²⁺ metal ions, resulting in recoveries of approximately 100% for all water samples. Ag⁺, Cd²⁺, Cu²⁺, Mn²⁺, Ni²⁺, Zn²⁺, Hg²⁺, Ca²⁺, Mg²⁺, Cr³⁺, Al³⁺ and Fe³⁺ metal ions were studied with respect to their interference with Pb²⁺ metal ion determination, and the chelating resin exhibited high selectivity for Pb²⁺ at pH 7. The analytical properties of merit were obtained using the parameters previously optimized. The method shows high precision with a relative standard deviation (R.S.D.) of 1.1% (n=7) for a solution containing 50µgL^–1 of Pb²⁺ and a detection limit (L.O.D.) of 1.7µgL^–1.     

Synthesis and characteristics of a chelating resin as an extractant and chromogenic reagent of heavy metal ions in solid phase extraction

A new chelating resin (CPS-DMA-SABA) was synthesized with the chloromethylated cross-linked polystyrene porous beads (CPS) as raw materials, which were bonded with salicylidene-o-aminobenzoic acid (SABA) on the surface via a quaternary ammonium unit as a linker. The results showed that CPS-DMA-SABA would easily change into a zwitterionic chelating resin (CPS-DMA-SABZ) when washed with distilled water. CPS-DMA-SABA was characterized by elemental analysis, infrared spectra and thermo-gravimetric analysis. The ion sorption capacities of CPS-DMA-SABA were found to be 1916 μg/g for Zn²⁺ with pH at 4.5, 1620 μg/g for Cu²⁺ with pH at 6.2, 1291 μg/g for Ni²⁺ with pH at 6.6 and 780 μg/g for Cr³⁺ with pH at 5.5, respectively. The experiments showed CPS-DMA-SABA also changed its color when meeting with the metal ion in the aqueous solution. As a consequence, CPS-DMA-SABA can not only be used as a solid phase extractant but also an indicator for confirming the heavy metal ion in solutions.     

Potentiometric Titration of Trace Concentrations of Penicillamine Using Ion Selective Electrodes

Abstract

Penicillamine (PA) has shown promise as a therapeutic agent in the treatment of rheumatoid arthritis (RA), and a sensitive analytical procedure applicable to physiological fluids is needed. PA is a metal chelating agent which forms very strong complexes with heavy metal ions (e.g., Hg²⁺, Cu²⁺, Pb²⁺). This characteristic has been applied to the analytical problem presented. The method developed is based on potentiometric titration of the ligand with a metal ion solution utilizing for endpoint detection an indicator electrode selective for this metal ion. The procedure described used lead (II) as the titrant and a lead (II) selective electrode. Demonstrated precision was ±2.0% when 7.5 μg PA was determined in 50 ml solution.     

A chelating resin with bis[2-(2-benzothiazolylthioethyl)sulfoxide]: Synthesis, characterization and properties for the removal of trace heavy metal ion in water samples

A new chelating resin containing bis[2-(2-benzothiazolylthioethyl)sulfoxide] was synthesized using chloromethylated polystyrene as material and characterized by elemental analysis and infrared spectra. The adsorption capacities of the newly formed resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were investigated over the pH range 1.0-6.0. The resin exhibited no affinity for alkali or alkaline earth metal ions. The maximum adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Cd²⁺ and Fe³⁺ were 1.49, 0.96, 0.58, 0.11, 0.37, 0, 0.24, 0.36 and 0.25 mmol g⁻¹, respectively. In column operation it had been observed that Hg²⁺ and Ag⁺ in trace quantity could be separated from different binary mixtures and Hg²⁺ could be effectively removed from industrial wastewater and the natural water spiked with Hg²⁺ at usual pH.     

Preconcentration and Determination of Copper(II) by Novel Solid-Phase Extraction and High-Resolution Continuum Source Flame Atomic Absorption Spectrometry

Amberlite XAD-4 modified with N-para-anisidine-3,5-di-tert-butylsalicylaldimine was investigated as a new chealting sorbent for the selective separation and preconcentration of Cu(II). The metal ion was retained by chemical sorption on the modified resin, eluted by hydrochloric acid, and determined by high-resolution continuum source flame atomic absorption spectrometry. The prepared resin was characterized for the solid-phase extraction of Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ in a column. The influence of the pH, the mass of solid phase, eluent, flow rate, and sample volume was optimized. Using the optimum conditions, only Cu(II) showed quantitative sorption at the 95% confidence level, and the recoveries of the other metal ions were below 80%. A preconcentration factor 125 was obtained for Cu(II) with a limit of detection of 0.56?µg?L^?1. The method was used for the determination of Cu(II) in tap water, river water, tomato leaves, and fish. The relative standard deviation and the relative error were lower than 7%.     

Template effects in chelating polymers

Poly(4′-methyl-4-vinyl-2,2′-bipyridine) has been prepared as have various copolymers with divinylbenzene. When polymerization is carried out in the presence of metal ions (Ni²⁺, Co²⁺, Cu²⁺) a metal-containing copolymer is obtained which, when the metal ion is removed with acid, retains some memory of the original chelating metal.     

Complexing properties of cation-exchangers grafted with carboxyl moieties

The complexing properties of CM-52, Olvagel-COOH, MacroPrep 50 CM, and hypercrosslinked polystyrene MN (carboxyl-grafted sorbents) toward Cu²⁺, Co²⁺, Ni²⁺, Cd²⁺, Zn²⁺, Mn²⁺, and Pb²⁺ have been studied. The optimal parameters for the sorption of these metal ions from solution have been determined. The pH effect on the ion uptake has been studied. The uptake is maximal at pHs higher than 5–6. When pH is lower than 2, the indicated ions are quantitatively desorbed. Olvagel-COOH is most selective toward these ions.     

Divalent metal ion-sensitive holographic sensors

A holographic sensor for real-time detection of divalent metal ions (Ca²⁺, Mg²⁺, Ni²⁺, Co²⁺ and Zn²⁺) has been fabricated by incorporating a chelating monomer into a hydrogel matrix. A methacrylated analogue of iminodiacetic acid (IDA) was prepared and co-polymerised with hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EDMA) as a cross-linker to form polymer films. A silver-based reflection hologram was incorporated into the hydrogel by diffusion followed by holographic recording using a frequency-doubled Nd/YAG laser. Changes in the replay wavelength of the hologram were used to characterise the swelling behaviour of the matrix as a function of its chemical composition and concentration of analyte in the media. The effects of active monomer, cross-linker, pH and ionic strength on the swelling of the matrix and on metal detection sensitivity have been studied. Polymers containing >10 mol% of chelating monomer and 6 mol% of cross-linker showed significant responses (46.3 nm) within 30 s at an ion concentration of 0-40 nm. The selectivity of the holograms towards the different ions tested was Ni²⁺>Zn²⁺>Co²⁺>Ca²⁺>Mg²⁺. The sensor showed fully reversible responses, permitting real-time monitoring of calcium ion efflux during the germination of Bacillus megaterium spores.     

Binding of some first-row transition metal ions by a poly(iminoethylene)dithiocarbamate copolymer

The binding of the transition metal ions VO²⁺, Fe²⁺, Fe³⁺, CO²⁺, Co³⁺, Ni²⁺ and Cu²⁺ by a poly(iminoethylene) dithiocarbamate copolymer has been investigated by uptake studies and physical measurements (electronic, IR, and ESR spectra and magnetic susceptibility). Metal ions may be bound by both the dithiocarbamato and amino groups of the co-polymer. Binding to nitrogen (in addition to binding to sulphur) increases in the order FE(II)<Ni(II)<Cu(II) and accounted for increasing metal ion uptake by the copolymer in the same order. Factors which determine the relative uptake of the metal ions by the copolymer are discussed.     

Study of some metallic silicates as ion-exchangers

The extraction of ammine complexes of Cu²⁺, Cd²⁺, Ni²⁺, Co²⁺ and Zn²⁺ by synthesised manganese, nickel and zinc silicates has been studied at different pH and ionic concentrations in the external solution. It has been found that the uptake of the metal ion Co²⁺, Cu²⁺ and Zn²⁺ increases with increase in pH of the external solution, attains a maximum and then decreases. However, the uptake for Cd²⁺ and Ni²⁺ increases continuously. The q_A values of all the silicates increases with the increase in the concentration of the exchanging ion and its order for the investigated metal ions is Ni²⁺ < Co²⁺ < Cd²⁺ < Zn²⁺ < Cu²⁺.     

ADDUCTS OF THEOBROMINE WITH 3d METAL PERCHLORATES

Abstract

Adducts of theobromine (tbH) with 3d metal perchlorates (Mⁿ⁺ = Cr^3-. Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn^2- I here prepared by refluxing mixtures of the Iigand and a metal salt in ethyl acetate-triethyl orthoformate. The new complexes invariably involve 2: 1 molar ratios of tbH to metal ion and are apparently monomeric with terminal tbH ligands binding riaa ring nitrogen (N9 or Nl). The Mn²⁺, Cu²⁺ and Zn^2- complexes are distorted tetrahedral, involving tuo tbH and two unidentate perchlorato ligands in the first coordination sphere of the metal ion. The remaining metal(II) complexes (Fe, Co, Ni) were obtained as monohydrates. These compounds are pentacoordinated of the [M(tbH)₂(OClO₃)₂(OH₂)] type, containing one aqua ligand in addition to the tbH and perchlorato ligands. The Cr³⁺ and Fe³⁺ complexes are low-symmetry hexacoordinated, with two tbH ligands. two unidentate and one bidentate chelating perchlorate Iigands.