1,2-Bis(diphenylphosphino)carborane as a dual mode ligand for both the Sonogashira coupling and hydride-transfer steps in palladium-catalyzed one-pot synthesis of allenes from aryl iodides

[reaction: see text] One-pot allene synthesis from aryl iodides 1 and propargyldicyclohexylamine 2 proceeded in the presence of Pd(2)(dba)(3).CHCl(3) catalyst (2.5 mol %), 1,2-bis(diphenylphosphino)carborane 5 (10 mol %), CuI (15 mol %), and Et(3)N (150 mol %) to give the corresponding allenes 4 in good to high yields. Electron-deficient bidentate phosphines, such as 1,2-bis(diphenylphosphino)carborane 5 and (C(6)F(5))(2)PC(2)H(4)P(C(6)F(5))(2), play the role of a dual mode ligand for both the Sonogashira coupling and hydride-transfer reactions.     

Palladium-catalyzed aminoallylation of activated olefins with allylic halides and phthalimide

The three-component aminoallylation reaction of the activated olefins 2 with the phthalimide 1a and allyl chloride proceeded very smoothly in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) and Cs(2)CO(3) (3 equiv against 2) in dichloromethane at room temperature to give the corresponding aminoallylated products, N-pent-4-enylphthalimides 3, in 58-99% yields. The reaction of oxazolidinone 1b also proceeded very smoothly to give N-(2,2-dicyano-1-phenylpent-4-enyl)oxazolidinone in a quantitative yield; however, the Tsuji-Trost-type allylation products 4 were obtained in the case of dibenzylamine, N-tosylaniline, and pyrrolidin-2-one. Further, 2 underwent cycloaddition with N-tosylvinylaziridine 9a in the presence of Pd(2)dba(3).CHCl(3) (5 mol %)/P(4-FC(6)H(4))(3) (40 mol %) in THF at room temperature, giving the corresponding pyrrolidines 11 in 69-99% yields.     

四种阴离子的毛细管电泳电导检测(英文)

 采用柠檬酸 柠檬酸钠作为缓冲体系 ,使用负高压 ,对Cl-,NO3 -,HCO3 -和H2 PO4 -等 4种常见阴离子进行了分离检测 ,研究了缓冲剂的种类、浓度、pH值及操作电压对分离的影响。在选定的条件下 ,4种离子的定量线性范围 :Cl-5 0× 10 -5mol/L～ 2 5× 10 -3 mol/L ,NO3 -6 0× 10 -5mol/L～ 2 0× 10 -3 mol/L ,HCO3 -5 0× 10 -6mol/L～ 2 0× 10 -4 mol/L ,H2 PO4 -6 0× 10 -5mol/L～ 1 0× 10 -3 mol/L ;检出限 :Cl-1 5× 10 -5mol/L ,NO3 -3 0×10 -5mol/L ,HCO3 -1 0× 10 -6mol/L ,H2 PO4 -2 0× 10 -5mol/L ;峰面积的RSD (n =6 ) :Cl-3 1% ,     

Palladium-catalyzed functionalization of indoles with 2-acetoxymethyl-substituted electron-deficient alkenes

New functionalizations of indoles via palladium-catalyzed reaction of indoles and 2-acetoxymethyl-substituted electron-deficient alkenes are reported. It was found that for N-protected indoles the reaction proceeded smoothly in the presence of 5 mol % of Pd(acac)2 and 10 mol % of PPh3 at 80 degrees C in HOAc, while for N-unprotected indoles, the reaction was carried out by using 5 mol % of Pd(dba)2 or 2.5 mol % of Pd2(dba)3.CHCl3 with 10 mol % of 2,2'-bipyridine as the catalyst in toluene. This strategy allows the selective installation of electron-deficient olefin functionality at the 3-position of indoles, which might be difficult to obtain by other methods and can be further elaborated.     

Efficient synthesis of 2,2-diaryl-1,1-difluoroethenes via consecutive cross-coupling reactions of 2,2-difluoro-1-tributylstannylethenyl p-toluenesulfonate

2,2-Difluoro-1-tributylstannylethenyl p-toluenesulfonate (2) was reacted with aryl iodides in the presence of 10 mol % of Pd(PPh(3))(4) and 10 mol % of CuI in DMF at 80 °C for 10-20 h to give the cross-coupled products 3 in 35-97% yields. Further coupling reaction of 3 with arylstannanes in the presence of 5 mol % of Pd(PPh(3))(4) and 3 equiv of LiBr in DMF at 100 °C for 2-24 h afforded the desired products 5 in 25-78% yields.     

A new route to cyclopentenones via ruthenium-catalyzed carbonylative cyclization of allylic carbonates with alkenes

[RuCl2(CO)3]2/Et3N and (eta 3-C3H5)RuBr(CO)3/Et3N are highly effective catalyst systems for carbonylative cyclization of allylic carbonates with alkenes to give the corresponding cyclopentenones in high yields. For example, treatment of allyl methyl carbonate (1a) with 2-norbornene (2a) in the presence of a catalytic amount of [RuCl2(CO)3]2 (2.5 mol %) and Et3N (10 mol %) at 120 degrees C for 5 h under 3 atm of carbon monoxide gave the corresponding cyclopentenone, exo-4-methyltricyclo[5.2.1.0(2,6)]dec-4-en-3-one (3a), in 80% yield with high stereoselectivity (exo 100%).     

Remarkable dynamical opening and closing of platinum and palladium pentaruthenium carbido carbonyl cluster complexes

The reaction of Ru(5)(CO)(15)(mu(5)-C), 1, with Pt(PBu(t)(3))(2) at room temperature yielded the mixed-metal cluster complex PtRu(5)(CO)(15)(PBu(t)(3))(C), 2, in 52% yield. Compound 2 consists of a mixture of two interconverting isomers in solution. One isomer, 2A, can be isolated by crystallization from benzene/octane solvent. The second isomer, 2B, can be isolated by crystallization from diethyl ether. Both were characterized crystallographically. Isomer 2A consists of a square pyramidal cluster of five ruthenium atoms with a phosphine-substituted platinum atom spanning the square base. Isomer 2B consists of a square pyramidal cluster of five ruthenium atoms with a phosphine-substituted platinum atom on an edge on the square base. The two isomers interconvert rapidly on the NMR time scale at 40 degrees C, deltaG(313)++ = 11.4(8) kcal mol(-1), deltaH++ = 8.8(5) kcal mol(-1), deltaS++ = -8.4(9) cal mol(-1) K(-1). The reaction of Pd(PBu(t)(3))(2) with compound 1 yielded two new cluster complexes: PdRu(5)(CO)(15)(PBu(t)(3))(mu(6)-C), 3, in 50% yield and Pd(2)Ru(5)(CO)(15)(PBu(t)(3))(2)(mu(6)-C), 4, in 6% yield. The yield of 4 was increased to 47% when an excess of Pd(PBu(t)(3))(2) was used. In the solid state compound 3 is structurally analogous to 2A, but in solution it also exists as a mixture of interconverting isomers; deltaG(298)++ = 10.6(6) kcal mol(-1), deltaH++ = 9.7(3) kcal mol(-1), and deltaS++ = -3(1) cal mol(-1) K(-1) for 3. Compound 4 contains an octahedral cluster consisting of one palladium atom and five ruthenium atoms with an interstitial carbido ligand in the center of the octahedron, but it also has one additional Pd(PBu(t)(3)) grouping that is capping a triangular face of the ruthenium cluster. The Pd(PBu(t)(3)) groups in 4 also undergo dynamical interchange that is rapid on the NMR time scale at 25 degrees C; deltaG(298)++ = 11(1) kcal mol(-1), deltaH++ = 10.2(4) kcal mol(-1), and deltaS++ = -3(2) cal mol(-1) K(-1) for 4.     

Regioselective haloaromatization of 1,2-bis(ethynyl)benzene via halogen acids and PtCl2. Platinum-catalyzed 6-pi electrocyclization of 1,2-bis(1'-haloethenyl)benzene intermediates

[reaction: see text] Treatment of 1,2-bis(ethynyl)benzene (1) with aqueous HX (X = Br, I) in hot 3-pentanone (100-105 degrees C, 2 h) afforded 1,2-bis(1'-haloethenyl)benzene species 2-Br and 2-I in 98% and 95% yields, respectively. The hydrochlorination of endiyne 1 failed to proceed at elevated temperature but was implemented efficiently by PtCl2 (5 mol %) in hot 3-pentanone (100 degrees C, 2 h) to give 1,2-bis(1'-chloroethenyl)benzene 2-Cl in 80% yield. In the presence of PtCl2 (5 mol %), these halides 2-Cl,2-Br, and 2-I were subsequently converted to 1-halonaphthalenes 3-Cl, 3-Br, and 3-I in the mother solution via sequential 6-pi electrocyclization and dehalogenation reactions. PtCl2 (5 mol %) also effected direct haloaromatization of endiyne 1 with HX (X = Cl, Br, I) and gave 1-halonaphthalenes 3-Cl, 3-Br, and 3-I in 64-71% yields. This investigation reports the scope and the regioselectivity of haloaromatization of various enediynes catalyzed by PtCl2.     

Formation of a quaternary carbon center through the Pd(0)/PhCOOH-catalyzed allylation of cyclic beta-keto esters and 1,3-diketones with alkynes

Formation of a quaternary carbon center through the allylation of beta-keto esters and 1,3-diketones with alkynes is accomplished by the use of Pd(0)/benzoic acid catalyst. Reactions of various cyclic beta-keto esters and 1,3-diketones with alkynes in the presence of Pd(2)dba(3).CHCl(3) (5 mol %), PPh(3) (40 mol %), and PhCOOH (10 mol %) proceeded at 100 degrees C in toluene (5 M) to give the corresponding allylation products in high yields in a regio- and stereoselective manner. The possibility of asymmetric allylation is also discussed.     

A bimetallic catalyst and dual role catalyst: synthesis of N-(alkoxycarbonyl)indoles from 2-(alkynyl)phenylisocyanates

3-allyl-N-(alkoxycarbonyl)indoles are synthesized via the reaction of 2-(alkynyl)phenylisocyanates and allyl carbonates in the presence of Pd(PPh(3))(4) (1 mol %) and CuCl (4 mol %) bimetallic catalyst. It is most probable that Pd(0) acts as a catalyst for the formation of a pi-allylpalladium alkoxide intermediate and Cu(I) behaves as a Lewis acid to activate the isocyanate, and the cyclization step proceeds with a cooperative catalytic activity of Pd and Cu. On the other hand, N-(alkoxycarbonyl)indoles are produced via the reaction of 2-(alkynyl)phenylisocyanates and alcohols under a catalytic amount of Na(2)PdCl(4) (5 mol %) or PtCl(2) (5 mol %). Pd(II) or Pt(II) catalyst exhibits dual roles; it acts as a Lewis acid to accelerate the addition of alcohols to isocyanates and as a typical transition-metal catalyst to activate the alkyne for the subsequent cyclization.     

Organocatalytic enantioselective conjugate addition to alkynones

The first catalytic enantioselective addition of beta-dicarbonyl compounds to alkynones is presented. The conjugate addition proceeds in very high yields, giving a mixture of (Z)- and (E)-enones with up to 95% ee using the cinchona alkaloid [DHQ]2PHAL (5 mol %) as the catalyst. This organocatalytic enantioselective reaction has been further developed to a one-pot procedure to give the optically active (E)-enone adduct using first [DHQ]2PHAL (5 mol %), followed by Bu3P (10 mol %), as the catalysts.     

In situ trapping of Boc-2-pyrrolidinylmethylzinc iodide with aryl iodides: direct synthesis of 2-benzylpyrrolidines

Addition of (S)-(+)-tert-butyl 2-(iodomethyl)pyrrolidine-1-carboxylate to activated zinc, aryl halides, and a catalyst derived from Pd(2)(dba)(3) (2.5 mol %) and SPhos (5 mol %) in DMF allows trapping of the corresponding organozinc reagent, with formation of Boc-protected 2-benzylpyrrolidines (20-72%).     

Unusual palladium-catalyzed silaboration of allenes using organic iodides as initiators: mechanism and application

A highly regio- and stereoselective method for the synthesis of various 2-silylallylboronates 7 from allenes 1 and 2-(dimethylphenylsilanyl)-4,4,5,5-tetramethyl[1,3,2]dioxaborolane (5) catalyzed by palladium complexes and initiated by organic iodides is described. Treatment of monosubstituted aryl and alkylallenes RCH=C=CH(2) (1a-m) and 1,1-dimethylallene (1n) with borylsilane 5 in the presence of Pd(dba)(2) (5 mol %) and organic iodide 3a (10 mol %) afforded the corresponding silaboration products 7a-n in moderate to excellent yields. This catalytic silaboration is totally regioselective with the silyl group of 5adding to the central carbon and the boryl group to the unsubstituted terminal carbon of allene. Furthermore, the reactions show very high E stereoselectivity with the Z/E ratios lying in the range from 1/99 to 7/93. In the absence of an organic iodide, silaboration of 1 with 5 still proceeds, but gives products having completely different regiochemistry as that of 7. The silaboration chemistry can be applied to the synthesis of homoallylic alcohols. Treatment of allenes (1) with borylsilane 5 and aldehydes 14 in the presence of Pd(dba)(2) (5 mol %) and 3a (10 mol %) at 80 degrees C in ethyl acetate for 5 h afforded homoallylic alcohols 15a-p in one pot in good to excellent yields, with exceedingly high syn selectivity (>93%). Mechanistic pathways involving an unusual palladium-catalyzed three-component assembling reaction of dimethylphenylsilyl iodide, allene 1, and borylsilane 5 were proposed to account for these catalytic reactions.     

Metal-catalyzed chemoselective cycloisomerization of cis-2,4-dien-1-als to 3-cyclopentenones and 4-alkylidene-3,4-dihydro-2H-pyrans

[reaction: see text] PtCl(2) (5 mol %) catalyst effected cycloisomerization of cis-2,4-dien-1-al (1) to 3-cyclopentenone (3) efficiently in hot toluene. In the presence of p-TSA, this PtCl(2) catalysis gave 2-cyclopentenone (5) exclusively because of the secondary isomerization reaction. Although the 1-2 equilibrium state greatly favors aldehyde (1), PdCl(2)(PhCN)(2) (5 mol %) catalyzed cycloisomerization of aldehyde (1) to 4,6,7,8-tetrahydro-3H-isochromene (4) smoothly in hot toluene. A plausible mechanism is proposed on the basis of reaction observation and isotope-labeled experiment.     

Palladium-triethylborane-triggered direct and regioselective conversion of allylic alcohols to allyl phenyl sulfones

A combination of Pd(OAc)2 (5 mol %), PPh3 (10 mol %), and Et3B (200 mol %) promotes the formation of allyl phenyl sulfones from the allylic alcohols directly with excellent yields under mild conditions. The activation of an alcohol group is not necessary which is achieved in situ. The conjugated dienols also were equally effective for the said transformation.     

Synthesis of substituted benzoxacycles via a domino ortho-alkylation/Heck coupling sequence

The synthesis of a variety of alkylidene benzoxacycles via a domino palladium-catalyzed ortho-alkylation/intramolecular Heck reaction is described. Under the optimized conditions [Pd(OAc)2 (10 mol %), P(2-Furyl)3 (20 mol %), norbornene (4 equiv), Cs2CO3 (2 equiv), CH3CN, 80 degrees C], aryl iodides with oxygen-tethered Heck acceptors are coupled with alkyl bromides (5 equiv) to generate a variety of six- and seven-membered-ring benzoxacyclic products.     

One-Pot synthesis of gamma,delta-unsaturated carbonyl compounds from allyl alcohols and vinyl or isopropenyl acetates catalyzed by [IrCl(cod)]2

One-pot synthesis of gamma,delta-unsaturated carbonyl compounds from allyl alcohols and vinyl or isopropenyl acetates was achieved through in situ generation of allyl vinyl ethers by the action of the [IrCl(cod)]2 complex followed by Claisen rearrangement of the resulting ethers. For instance, the reaction of trans-2-methyl-3-phenyl-2-propen-1-ol with isopropenyl acetate in the presence of [IrCl(cod)]2 (1 mol %) and Cs2CO3 (5 mol %) at 100 degrees C for 3 h followed by 140 degrees C for 15 h afforded 5-methyl-4-phenyl-5-hexen-2-one in 72% yield. When vinyl acetate was employed in place of isopropenyl acetate, 4-methyl-3-phenyl-4-pentenal was obtained in 83% yield.     

2,3,4- or 2,3,5-trisubstituted furans: catalyst-controlled highly regioselective ring-opening cycloisomerization reaction of cyclopropenyl ketones

2,3,4- or 2,3,5-trisubstituted furans were highly regioselectively formed from the cycloisomerization reaction of the same starting cyclopropenes 1 via the subtle choice of the transition metal halides. Under the catalysis of 5 mol % PdCl2(CH3CN)2, 2,3,5-trisubstituted furans 2 were given in 50-88% yields with 95-99% regioselectivities, while 2,3,4-trisubstituted furans 3 were formed in 78-96% yields with 99% regioselectivities under the catalysis of 5 mol % CuI.     

Reductions with lithium in low molecular weight amines and ethylenediamine

Reductions of several types of compounds with lithium and ethylenediamine using low molecular weight amines as solvent are described. In all cases 1 mol of ethylenediamine or N, N'-dimethylethylenediamine per gram-atom of lithium was used. In some cases it was beneficial to add an alcohol as a proton donor. These reaction conditions were applied to the debenzylation of N-benzylamide and lactams which are refractory to hydrogenolysis with hydrogen and a catalyst. N-Benzylpilolactam 2, synthesized from pilocarpine hydrochloride in refluxing benzylamine, was debenzylated in good yield using 10 gram-atoms of lithium per mole (10 Li/mol) of 2 in n-propylamine. The debenzylation of N-benzyl-N-methyldecanoic acid amide, 4 (6 Li/mol), in t-butylamine/N, N'-dimethylethylenediamine gave N-methyldecanoic acid amide 6 in 70% yield. Alternatively, reduction of 4 (7 Li/mol) in t-butanol/n-propylamine/ethylenediamine gave n-decanal 12 in 36% yield. Using the same conditions, thioanisole, 1-adamantane-p-toluenesulfonamide, and 1-adamantane methyl p-toluenesulfonate were reduced with 3, 7, and 7.2 Li/mol of compound to give thiophenol (74%), adamantamine (91%), and 1-adamantane methanol (75%), respectively. In this solvent system naphthalene and 3-methyl-2-cyclohexene-1-one were reduced to isotetralin (74%) and 3-methyl cyclohexanone (quantitative) with 5 and 2.2 Li/mol of starting compound, respectively. Oximes and O-methyloximes were reduced to their corresponding amines using 5 and 8 Li/mol of compound, respectively. Anisole was also reduced to 1-methoxy-1,4-cyclohexadiene with 2.5 Li/mol of anisole. Undecanenitrile was reduced to undecylamine with 8.6 Li/mol. Additionally, a base-catalyzed formation of imidazolines from a nitrile and ethylenediamine was also explored.     

The reaction of tricarbon with acetylene: an ab initio/RRKM study of the potential energy surface and product branching ratios

Ab initio calculations of the potential energy surface for the C3(1Sigmag+)+C2H2(1Sigmag+) reaction have been performed at the RCCSD(T)/cc-pVQZ//B3LYP/6-311G(d,p) + ZPE[B3LYP/6-311G(d,p)] level with extrapolation to the complete basis set limit for key intermediates and products. These calculations have been followed by statistical calculations of reaction rate constants and product branching ratios. The results show the reaction to begin with the formation of the 3-(didehydrovinylidene)cyclopropene intermediate i1 or five-member ring isomer i7 with the entrance barriers of 7.6 and 13.8 kcal/mol, respectively. i1 rearranges to the other C5H2 isomers, including ethynylpropadienylidene i2, singlet pentadiynylidene i3, pentatetraenylidene i4, ethynylcyclopropenylidene i5, and four- and five-member ring structures i6, i7, and i8 by ring-closure and ring-opening processes and hydrogen migrations. i2, i3, and i4 lose a hydrogen atom to produce the most stable linear isomer of C5H with the overall reaction endothermicity of approximately 24 kcal/mol. H elimination from i5 leads to the formation of the cyclic C5H isomer, HC2C3, +H, 27 kcal/ mol above C3+C2H2. 1,1-H2 loss from i4 results in the linear pentacarbon C5+H2 products endothermic by 4 kcal/mol. The H elimination pathways occur without exit barriers, whereas the H2 loss from i4 proceeds via a tight transition state 26.4 kcal/mol above the reactants. The characteristic energy threshold for the reaction under single collision conditions is predicted be in the range of approximately 24 kcal/mol. Product branching ratios obtained by solving kinetic equations with individual rate constants calculated using RRKM and VTST theories for collision energies between 25 and 35 kcal/mol show that l-C5H+H are the dominant reaction products, whereas HC2C3+H and l-C5+H2 are minor products with branching ratios not exceeding 2.5% and 0.7%, respectively. The ethynylcyclopropenylidene isomer i5 is calculated to be the most stable C5H2 species, more favorable than triplet pentadiynylidene i3t by approximately 2 kcal/mol.