A comprehensive assessment on degradation of multi-walled carbon nanotube-reinforced EMA nanocomposites

Thermal degradation kinetics of MWNT-reinforced EMA-based nanocomposites having different methyl acrylate (MA) contents (by % mass) ranging from 9 to 30% have been monitored. Kissinger and Flynn?CWall?COzawa methods for evaluating non-isothermal degradation of polymers have been examined. Overall, the thermal stabilities of the nanocomposites are the function of amount of MWNTs loading and their state of dispersion that depends on the MA content of respective EMAs. Composite samples exhibit higher activation energy (E _a) than the neat EMAs but the E _as of the composites diminish with increased MA contents of the matrices. TG-Mass spectrometry has been used to identify the volatile products resulting from thermal degradation of composites, and a promising mechanism has been proposed over different range of temperatures of degradation. It is proposed that the side-group scission of methoxycarbonyl group initiates thermal decomposition following combination of chain end and random chain scission reactions, ensuing pseudo second-order kinetics.     

Constant rate thermal analysis for thermal stability studies of polymers

This paper explores the relationship between the shapes of temperature-time curves obtained from experimental data recorded by means of constant rate thermal analysis (CRTA) and the kinetic model followed by the thermal degradation reaction. A detailed shape analysis of CRTA curves has been performed as a function of the most common kinetic models. The analysis has been validated with simulated data, and with experimental data recorded from the thermal degradation of polytetrafluoroethylene (PTFE), poly(1,4-butylene terephthalate) (PBT), polyethylene (PE) and poly(vinyl chloride) (PVC). The resulting temperature-time profiles indicate that the studied polymers decompose through phase boundary, random scission, diffusion and nucleation mechanisms respectively. The results here presented demonstrate that the strong dependence of the temperature-time profile on the reaction mechanism would allow the real kinetic model obeyed by a reaction to be discerned from a single CRTA curve.     

Pyrolysis kinetics of ethylene–propylene (EPM) and ethylene–propylene–diene (EPDM)

The thermal degradation kinetics of several ethylene–propylene copolymers (EPM) and ethylene–propylene–diene terpolymers (EPDM), with different chemical compositions, have been studied by means of the combined kinetic analysis. Until now, attempts to establish the kinetic model for the process have been unsuccessful and previous reports suggest that a model other than a conventional nth order might be responsible. Here, a random scission kinetic model, based on the breakage and evaporation of cleavaged fragments, is found to describe the degradation of all compositions studied. The suitability of the kinetic parameters resulting from the analysis has been asserted by successfully reconstructing the experimental curves. Additionally, it has been shown that the activation energy for the pyrolysis of the EPM copolymers decreases by increasing the propylene content. An explanation for this behavior is given. A low dependence of the EPDM chemical composition on the activation energy for the pyrolysis has been reported, although the thermal stability is influenced by the composition of the diene used.     

Enhanced general analytical equation for the kinetics of the thermal degradation of poly(lactic acid) driven by random scission

An enhanced general analytical equation has been developed in order to evaluate the kinetic parameters of the thermal degradation of poly(lactic acid) (PLA) at various linear heating rates and at constant rate conditions. This improvement consisted of replacing the n-order conversion function by a modified form of the Sestak-Berggren equation f(α) = c(1?α)ⁿα^m, which led to better adjustment of experimental data, and also adequately represented the conventional mechanisms for solid-state processes. The kinetic parameters so obtained have been compared to those determined by conventional differential and isoconversional methods. Given that the thermal degradation of PLA has been argued to be caused by random chain scission reactions of ester groups, the conversion function (α) = 2(α^1/2?α), corresponding to a random scission mechanism, has been tested.     

Thermal stability of ferrocene derivatives and ferrocene-containing polyamides

Thermogravimetric data and the kinetic interpretation of the curves of mass loss for ferrocene, ferrocenecarboxylic and ferrocenedicarboxylic acids and a series of ferrocene-containing polyamides are presented. The results indicate that the degradation process occurred with more than one stage of thermal degradation. The apparent activation energy values and the FTIR spectra of the degradation products suggest that the degradation mechanism occurred by either scission of weak links or by random scission of the chain. Apparently, the N-vicinal methylene group was the primary site of attack of oxygen on the polymer chain. This revised version was published online in August 2006 with corrections to the Cover Date.     

Nanosize and microsize clay effects on the kinetics of the thermal degradation of polylactides

Polylactide (PLA)-montmorillonite (MMT) micro- and nanocomposites based on semicrystalline and amorphous polymers and unmodified or organomodified clays at 5 wt% content were produced by melt mixing. Based on the three different test methods that were used to follow thermal degradation, different conclusions were obtained. During melt processing, thermomechanical degradation was more pronounced in the presence of all fillers, which apparently acted catalytically, but to different degrees. During isothermal degradation in air from 180 °C to 200 °C, degradation rate constants were calculated from novel equations incorporating changes in intrinsic viscosity (IV). Results show that the thermal degradation rate constants of the amorphous PLA and its composites are lower than those of the semicrystalline PLA and its composites. Due to better filler dispersion in the polymer matrix, the thermal degradation rate constants of the nanocomposites are significantly lower than those of the unfilled polymers and their microcomposites under air. As per dynamic TGA data and thermal kinetic analysis from weight losses and activation energy calculations, organomodified nanofillers have a complex effect on the polymer thermal stability; the unmodified fillers, however, reduce polymer thermal stability. These TGA data and kinetic analysis results also support the findings that the thermal stability of the amorphous PLA and its composites is higher than that of the semicrystalline polymer and its composites and the thermal stability of the nanocomposites is higher than that of the microcomposites. In general, mathematical modeling based on random thermal scission equations was satisfactory for fitting the TGA experimental data.     

Thermal stability and degradation behavior of hydroxyethyl methacrylate-poly(lactide) polymers

Hydroxyethyl methacrylate (HEMA)-Poly(L-lactide) (PLA) polymers, with different molar ratios of HEMA/lactide (1/4 and 1/8), were synthesized by ring-opening polymerization. The thermal degradation behavior and kinetic parameters of these obtained HEMA-PLA polymers were analyzed by thermogravimetric analysis (TGA) and Pyrolysis-Gas chromatography/Mass spectrometry (Py-GC/MS). It was found that the activation energies of thermal degradation of the polymers increased as the residue weight was decreased, indicating that the mechanism of thermal decomposition changes during the process progress. The results showed that the random chain scission proceeded at lower temperature, and subsequently the specific chain scission did so. Moreover, the results revealed that thermal stability of PLA was increased by the copolymerzation of HEMA. In addition, Py-GC/MS analysis showed that the main decomposed products obtained from the HEMA-PLA polymers were HEMA, lactide, dimer, trimer and tetramer.     

The effect of fullerene on the resistance to thermal degradation of polymers with different degradation processes

Investigations were made about the effect of fullerene (C₆₀) on the resistance to thermal degradation of high density polyethylene (HDPE), polypropylene (PP), polymethyl methacrylate (PMMA), and bisphenol A polycarbonate (PC) matrix by using thermogravimetric analysis coupled to Fourier transform infrared spectroscopy. The results showed that the influences of C₆₀ on the resistance to the thermal degradation of different polymers were dependent on their thermal degradation mechanism. The resistance to the thermal degradation of HDPE, PP, and PMMA were improved with the addition of C₆₀, especially for HDPE matrix, which indicated that the radical trapping played a dominant role. PP and PMMA released more gaseous products at high temperature by the random scission of C–C backbone; owing to the lower bond dissociation energy of C–C in the backbone for the existence of side chains. Meanwhile, the steric hindrance of side chains also made the radicals hard to recombine with each other and accelerated the random scission, leading to the less effect on the resistance to the thermal degradation of PP and PMMA. However, few changes of resistance to the thermal degradation were found in PC matrix with the addition of C₆₀ for its non-radical degradation mechanism.     

Potential of thermal analysis as applied to studying the kinetics of thermal degradation of polymers

The kinetics of thermal degradation of low-density polyethylene was studied by TGA and DSC at heating rates from 0.5 to 40 deg min^–1. Causes of significant discrepancies in the published effective kinetic constants of the overall reaction of thermal degradation of the polymers, determined using different experimental methods and different data treatment procedures, were analyzed. The possibility of using random break model as an alternative approach to describing polymer thermal degradation curves obtained by thermal analysis methods was demonstrated by the example of polyethylene.     

Solvent effect on thermal degradation of plasticized para-substituted polystyrenes

The thermal effect on stability of a series of para-substituted polystyrenes with methyl, methoxy and α-methyl substituents in various solvents was studied in the temperature range of 298-363 K. They gave a monomer fluorescence as a minor part and excimer fluorescence as a major part. Thermal heating of para-substituted polystyrenes shows a decrease in both monomer and excimer fluorescences in all used solvents. Thermal heating causes a small fluorescence quenching effect at lower temperatures in solution but becomes very dominant at higher temperatures. Added terephthalate and phthalate plasticizers to these para-substituted polystyrenes caused a quenching of both monomer and excimer fluorescences without the formation of exciplex emission. The thermal quenching processes of the plasticized polymers were accompanied by a change in the structure of the fluorescence spectra at high heating temperatures. This may indicate that thermodestruction of these polymers starts from a random chain scission. The change in solvent polarity has considerable effect on fluorescence quenching but it has a minor effect on the thermal degradation of these polymers. The binding energies for excimer formation were calculated in the used solvents.     

Thermal decomposition of poly(propylene sebacate) and poly(propylene azelate) biodegradable polyesters: Evaluation of mechanisms using TGA, FTIR and GC/MS

The synthesis, characterization and thermal behavior of two biodegradable aliphatic polyesters poly(propylene azelate) (PPAz) and poly(propylene sebacate) (PPSeb) are described in the present work. The thermal degradation of both polyesters was studied using thermogravimetric analysis (TG) by the determination of their mass losses during heating. From the thermogravimetric curves it can be seen that both polyesters are thermally stable materials since PPAz has its highest decomposition rate at 411.3 while PPSeb at 413.6 °C. From the variation of activation energy (E) with increasing degree of conversion it is found that the polyester's decomposition proceeds with a complex reaction mechanism with the participation of at least two different mechanisms. To evaluate these mechanisms the TG, FTIR and a combination of TG-gas chromatography-mass spectrometry (TG/GC-MS) methods were used. From mass ions detection of formed decomposition compounds, it was found that the decomposition of both polymers takes place, mainly, through β-hydrogen bond scission and secondarily through α-hydrogen bond scission. The main decomposition products are aldehydes, alcohols, allyl, diallyl, and carboxylic acids.     

The thermal degradation of poly(diethyl fumarate)

The kinetics and mechanism of the thermal degradation of poly(diethyl fumarate) (PDEF) were studied by thermogravimetry, as well as by analysis of the thermolysis volatiles and polymer residue. The characteristic mass loss temperatures were determined, as were the overall thermal degradation activation energies of three PDEF samples of varying molar mass. Ethylene and ethanol were present in the thermolysis volatiles at degradation temperatures below 300 °C, while diethyl fumarate was also evidenced at higher degradation temperatures. The amount of monomer increased with increasing degradation temperature. The dependence of the molar mass of the residual polymer on the degradation time and temperature was established and the number of main-chain scissions per monomer unit, s/P₀, calculated. A thermal degradation mechanism including de-esterification and random main-chain scission is proposed. The thermal degradation of PDEF was compared to the thermolysis of poly(ethyl methacrylate) (PEMA), poly(diethyl itaconate) (PDEI) and poly(ethyl acrylate) (PEA).     

An improved model for the kinetic description of the thermal degradation of cellulose

In spite of the large amount of work performed by many investigators during last decade, the actual understanding of the kinetics of thermal degradation of cellulose is still largely unexplained. In this paper, recent findings suggesting a nucleation and growth of nuclei mechanism as the main step of cellulose degradation have been reassessed and a more appropriate model involving chain scission and volatilization of fragments has been proposed instead. The kinetics of cellulose pyrolysis have been revisited by making use of a novel kinetic method that, without any previous assumptions regarding the kinetic model, allows performing the kinetic analysis of a set of experimental curves recorded under different heating schedules. The kinetic parameters and kinetic model obtained allows for the reconstruction of the whole set of experimental TG curves.     

Effects of residual metal compounds and chain-end structure on thermal degradation of poly(3-hydroxybutyric acid)

Thermal degradation behaviours of poly(3-hydroxybutyric acid) (P(3HB); bacterial poly[(R)-3-hydroxybutyric acid] and synthetic poly[(R,S)-3-hydroxybutyric acid] samples, were examined under both isothermal and non-isothermal conditions. The inverse of number-average degree of polymerisation for all P(3HB) samples decreased linearly with degradation time during the initial stage of isothermal degradation at a temperature ranging from 170-190 °C. In addition, crotonyl unit was detected in the residual polymer samples as main ω-chain-end. These results indicate that the dominant thermal degradation reaction for P(3HB) is a random chain scission via cis-elimination reaction of P(3HB) molecules. It was found that the presence of either Ca or Mg ions enhances the depolymerisation of P(3HB) molecules, while that Zn ions hardly catalyse the reaction. As a result, a shift of thermogravimetric curves toward the lower temperature regions was observed for the P(3HB) samples containing high amounts of Ca and Mg compounds.     

Terpolymerization of p-acetylpyridine oxime, p-methylacetophenone and formaldehyde, and its thermal studies

A terpolymer resin involving p-acetylpyridine oxime and p-methylacetophenone with formaldehyde (APOMAF) was synthesized by condensation polymerization in the presence of an acid catalyst. The structure of terpolymer was elucidated by FT-IR, ¹H NMR, pyrolysis gas chromatography mass spectrometer (Py?CGC?CMS), nitrogen adsorption/desorption analysis, Ubbelohde viscometer and non-aqueous conductometric titration, TG?CDTG and DSC. Molar fractions of monomer, condensing and comonomer unit (m ₁, m ₂, and m ₃) in APOMAF using ¹H NMR analysis data were calculated as 1.67; 0.27 and 0.66?mol%, respectively. The apparent activation energy of terpolymer by using various degradation models including the Flynn?CWall?COzawa (FWO), Kissinger?CAkahira?CSunose (KAS), and Friedman methods were 140.3; 144.9 and 129.9?kJ?mol^?1, respectively. The results from isoconversional degradation kinetics and Pyrolysis (GC?CMS) indicates that the degradation mechanism of terpolymer are likely limited by at least two-reaction step, the first being associated with the loss of the pendent methyl, acetyl, and oxime groups (side group elimination) while the second mass loss being due to the degradation of the terpolymer backbone (random scission) which clearly indicates that grafting pendant groups to the terpolymer backbone yields polymers with lower thermal stability. From the calculation, the solid state thermal degradation mechanism is proposed to be D₃ (three-dimensional diffusion) at initial stage and F ₁ (Random nucleation with one nucleus on the individual particles) at final stage.     

Mechanical degradation of polypropylene solutions under large pressure drops

The degradation of polypropylene (PP), dissolved in n‐alkanes at high temperatures and pressures, during the solution discharge to ambient conditions was experimentally studied. Molecular weight distributions (MWD) of the solubilized PP were measured by gel permeation chromatography. The MWD curves of PP obtained after discharge of the polymer solution shift to the low molecular weight side of the distribution and the polydispersity is reduced. In this work, a systematic study on the discharge products was performed to elucidate the degradation mechanism and the effects of temperature and concentration on this phenomenon. Initially, pure polymers, PP and polystyrene (PS) were studied varying the solution temperature. In a second stage, the effect of polymer concentration on chain scission was assessed using experiments on physical blends of PP/PS. In all cases, thermal and oxidative degradation were previously analyzed. Mechanical degradation was found to be the main chain scission mechanism. A negative linear functionality of the chain scission was found in both temperature and polymer concentration. To analyze the relationship between polymer degradation and molecular weight, the chain scission distribution function was calculated. On this basis, a critical molecular weight for the beginning of chain scission was obtained. This value is a function of temperature but remains constant with concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 455–465, 2007     

Stability of a salicylate-based poly(anhydride-ester) to electron beam and gamma radiation

The effect of electron beam and gamma radiation on the physicochemical properties of a salicylate-based poly(anhydride-ester) was studied by exposing polymers to 0 (control), 25 and 50 kGy. After radiation exposure, salicylic acid release in vitro was monitored to assess any changes in drug release profiles. Molecular weight, glass transition temperature and decomposition temperature were evaluated for polymer chain scission and/or crosslinking as well as changes in thermal properties. Proton nuclear magnetic resonance and infrared spectroscopies were also used to determine polymer degradation and/or chain scission. In vitro cell studies were performed to identify cytocompatibility following radiation exposure. These studies demonstrate that the physicochemical properties of the polymer are not substantially affected by exposure to electron beam and gamma radiation.     

Dimensions of branched polymers formed in simultaneous long‐chain branching and random scission

In free‐radical olefin polymerizations, the polymer‐transfer reactions could lead to chain scission as well as the formation of long‐chain branches. The Monte Carlo simulation for free‐radical polymerization that involves simultaneous long‐chain branching and random scission is used to investigate detailed branched structure. The relationship between the mean‐square radius of gyration 〈s²〉 and degree of polymerization P as well as that between the branching density and P is the same for both with and without random scission reactions—at least for smaller frequencies of scission reactions. The 〈s²〉 values were larger than those calculated from the Zimm–Stockmayer (Z‐S) equation in which random distribution of branch points is assumed, and therefore, the Z‐S equation may not be applied for low‐density polyethylenes. The elution curves of size exclusion chromatography were also simulated. The molecular weight distribution (MWD) calibrated relative to standard linear polymers is much narrower than the true MWD, and high molecular weight tails are clearly underestimated. A simplified method to estimate the true MWD from the calibrated MWD data is proposed. The MWD obtained with a light scattering photometer in which the absolute weight‐average molecular weight of polymers at each retention volume is determined directly is considered a reasonable estimate of the true MWD. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2960–2968, 2001     

Thermal degradation study of phenolphthalein polycarbonate

Phenolphthalein polycarbonate underwent complicated thermal degradation which included random scission, rearrangement, hydrolysis, Friedel-Crafts acylation, and cross-linking. The carbonate group and lactone ring were both susceptible to thermal deterioration. Kinetic parameters were determined from the dynamic TGA thermograms. During early stages of degradation the measured reaction order was nearly 1, which suggested a random chain scission mechanism. The measured activation energy was 42.6 kcal/mol, compared with 41.2 kcal/mol calculated from isothermal aging. The Arrhenius preexponential constant was 3.09 × 10¹¹ min^?1. Below 80% weight residue the plot of fractional weight against 1/T revealed that complicated reactions with different activation energies occurred simultaneously and resulted in a final overlap of TGA curves for different heating rates indicative of cross-linking and a lower preexponential constant. The reaction order changed and kept increasing in the last stages of degradation. Pyrolysis of this polymer was performed at 350°C under vacuum, followed by GC-mass spectroscopic identification of products. The volatile products (17.5%) contained CO₂, CO, O₂, H₂O, phenol, fluorenone, diphenyl carbonate, xanthone, anthraquinone, 2-hydroxylanthraquinone, 2-benzoxyanthraquinone, phenolphthalein, and trace amounts of benzoxyphenol and hydroquinone; the other 82.5% of products was insoluble gel. Functional group changes were examined by Fourier transform infrared spectroscopy (FT-IR). Lactone, carbonate, and aromatic absorptions decreased during degradation. Increasing absorptions at 1739, 1728, 1280–1200, and 1138–1075 cm^?1 were believed to result from aromatic ester (1728 cm^?1) and phenyl aromatic ester (1739 cm^?1) cross-linkages ortho to the aromatic ether group (increases at 1155 cm^?1 and 1280–1200 cm^?1). Existence of 2-hydroxyanthraquinone and xanthone contained in the crosslinked polymer matrix were also detected. Mechanisms for random scission, rearrangement, Friedel-Crafts acylation, hydrolysis, and cross-linking were suggested.     

Hydrolytic degradation of poly(rac‐lactide) and poly[(rac‐lactide)‐co‐glycolide] at the air–water interface

The understanding of the simultaneous transport and chain‐scission phenomena involved in the hydrolysis of bulk‐degrading polymers requires the experimental separation of chain cleavage and water diffusion. The hydrolytic chain cleavage of poly(rac‐lactide) rac‐(PLA) and poly[(rac‐lactide)‐co‐glycolide] (PLGA) is analysed on the basis of monolayer degradation experiments combined with an improved data reduction procedure. Different, partly contradictory models of the hydrolytic degradation and erosion mechanism of PLA and PLGA, namely random chain scission and chain‐end scission, are discussed in the literature. The instantaneous linear area reduction observed for the polymer Langmuir films indicates a chain‐end scission mechanism. As monolayers of end‐capped and non‐end‐capped polymers degrade with exactly the same rate, the observed differences in the degradation kinetics of bulk samples do clearly result from differences in the water penetration into these polymers. A pronounced ‘auto‐inhibition’ effect is observed for the polymers degraded at initially high pH of the aqueous subphase in the absence of buffers. Copyright © 2007 John Wiley & Sons, Ltd.