Intramolecular hydrogen bonding in 3‐imino‐propenylamine: Theoretical investigations

Intramolecular H‐bonds existing for derivatives of 3‐imino‐propenylamine have been studied using the B3LYP/6‐311++G** level of theory. The nature of these interactions, known as resonance‐assisted hydrogen bonds, has been discussed. Vibrational frequencies for α‐derivatives were calculated at the same level of theory. The topological properties of the electron density distributions for N? H···N intramolecular bridges have been analyzed in terms of the Bader theory of atoms in molecules (AIM). Calculation for 3‐imino‐propenylamine derivatives in water solution were also carried out at B3LYP/6‐311++G** level of theory. Finally, the analysis of hydrogen bond in this molecule and their derivatives by quantum theory of natural bond orbital methods fairly support the ab initio results. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

熔体自由基反应法制备聚丙烯/碳纳米管复合材料

以2,5-二甲基-2,5-双（叔丁基过氧基）己烷（DHBP）在聚丙烯体系中引发形成自由基,以二硫化四甲基秋兰姆（TMTD）调控自由基反应,通过熔融共混一步法制备了共价接枝的聚丙烯/碳纳米管（PP/CNTs）复合材料。 通过拉曼光谱和透射电子显微镜证明发生了共价接枝反应,并研究了PP/CNTs的结晶性能、热性能与力学性能。 结果表明,发生共价接枝的PP/CNTs与未接枝的PP/CNTs及PP相比,其结晶温度分别提高了2.6和12.0 ℃,热分解温度T5%分别提高了6.4和34.8 ℃,其拉伸强度和拉伸模量略有提高,冲击强度分别提高了56.7%和58.1%。     

Theoretical and experimental investigations of complexation with BF3.Et2O effects on electronic structures,energies and photophysical properties of Anil and tetraphenyl (hydroxyl) imidazol

The novel compounds (E)‐2‐(((4‐hydroxyphenyl)imino)methyl)phenol, Tetraphenyl (hydroxyl) imidazole and their corresponding Boron difluoride complexes were synthesized and characterized by spectroscopic techniques. Density functional theory calculations at B3LYP‐D3/6–311++G (d, p) level of theory were performed for the geometric parameters. The MEP surface studies were used to understand the behavior of molecules in terms of charge transfer and to determine how these molecules interact. We used the GIAO and the B3LYP‐D3 with a 6–311++ G (d, p) basis set to simulate the (¹H‐NMR and ¹⁹F‐NMR) and the IR spectra, respectively. The corresponding calculated results are in good agreement with the experimental data. The stability of the molecule arising from hyperconjugation interaction and charge delocalization were analyzed using NBO analysis. FMOs revealed the occurrence of charge transfer within the molecule. The complexation using BF₃.Et₂O was also found to have remarkable effects on the electrochemical properties of the studied molecules, where (b) and (d) present lower chemical stability, higher reactivity and higher polarizability than (a) and (c), respectively. Moreover, the energy gap of (a) and (c) decreased after complexation using BF₃.Et₂O, indicating the reliability of the electrochemical evaluation of LUMO and HOMO energy levels. These values are the factors explaining the possible charge transfer interaction within the molecule. The absorption and emission spectra of the model compound were also simulated and compared to experimental observations in the DMF solvent. The results of DFT calculations supported the structural and spectroscopic data and confirmed the structure modification of frontier molecular orbitals for BF₂ complexes as well as tunable potentials and energy levels.     

The Dowd-Beckwith ring expansion: a theoretical study

UB3LYP/6-311++G(d,p) and ROMP2/6-311++G(d,p)//UB3LYP/6-311++G(d,p) calculations including the effect of benzene solvent through the PCM-UAHF method render a concerted mechanism without fragmentation as the most favourable one for the Dowd-Beckwith radical ring expansion of the bromomethyl adduct of methyl cyclopentanone-2-carboxylate to yield methyl cyclohexanone-3-carboxylate. The corresponding concerted TS is a bicyclic alcoxy radical.     

Theoretical and experimental study of tropylium formation from substituted benzylpyridinium species

Fragmentation pathways of unsubstituted and substituted benzylpyridinium compounds were investigated using mass-analysed kinetic energy (MIKE) technique in combination with high level of quantum chemical calculations in the gas phase. Fast atom bombardment (FAB) source was used for ionisation of the studied compounds. The formation of both benzylium and tropylium species were investigated. Hybrid Hartree-Fock/Density Functional Theory calculations have been performed to assess the geometries and the energies of the transition states and intermediates. For each cases, different reaction pathways were investigated, and particularly in the case of the formation of tropylium species, the formation of the seven-membered ring before or after the loss of pyridine were studied. The effect of para-methyl and para-methoxy substituents on the activation energy of the rearrangement process to form thermodynamically stable tropylium compounds has been studied. Theoretical calculations showed competition between direct bond cleavage and rearrangement reactions to form benzylium and tropylium compounds, respectively. Experimental results also suggested that the rearrangement process takes place to yield stable tropylium under "soft ionisation techniques", such as FAB.     

Theoretical and experimental X-ray photoelectron spectroscopy investigation of ion-implanted nafion

The membrane properties of a Nafion surface can be modified by ion implantation with N⁺ or F⁺. The results are presented of an X-ray photoelectron spectroscopy (XPS) study of implanted surfaces. For the interpretation of the XPS spectra, calculations using a semiempirical quantum chemical formalism (AM1) have been applied, in conjunction with a charge-potential model, to predict the C_1s core electron binding energies. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 551–556, 2004     

The Molecular and Electronic Structure of Nickelatetrazole – A Theoretical Study

Nickelatetrazoles have been proposed as intermediates in the course of the photoreaction of Ni^II complexes of [NiP₂(N₃)₂] constitution (P₂: mono‐ or diphosphane ligands). However, any metallatetrazoles as well as their organic analogue, 5 H‐carbatetrazole, could neither be prepared nor identified up to now. Based on density functional theory (DFT) calculations, predictions are given concerning the molecular and electronic structure of tetrazoles. While 5 H‐tetrazole is indeed a rather unstable species, metallatetrazole moieties in square‐planar d⁸ transition metal complexes should be experimentally accessible.     

Characterization and thermal degradation of polypropylene-montmorillonite nanocomposites

Polypropylene (PP)-montmorillonite nanocomposites have been prepared using isotactic PP homopolymers with different rheological properties, and a maleic anhydride grafted PP. Morphology and structure of the composites were investigated by using X-ray techniques (WAXD, SAXS) and transmission electron microscopy (TEM). The absence of pristine clusters of the clay and the presence of intercalated and exfoliated structures were shown for all the investigated samples. The nanocomposite prepared by using maleic anhydride grafted PP showed a widespread exfoliation. The thermal behaviour and degradation have been studied by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The incorporation of the montmorillonite improves the thermal stability in air atmosphere of all the investigated PPs, thanks to a physical barrier effect of the silicate layers.     

Spin density distribution in mononuclear Rh(0) complexes: A combined experimental and DFT study

The paramagnetic complex [Rh(trop₂dach)]2 was obtained by reduction of the almost planar 16-electron cationic precursor complex, [Rh(trop₂dach)]⁺1 and characterized by EPR spectroscopy [g₁₁ = 2.069, g₂₂ = 2.014, g₃₃ = 1.964, g_iso = 2.016; A(Rh) = (<40, 29, 30)]. The unobservable small nitrogen hyperfine coupling and DFT calculations show that most of the spin density is localized on the hydrocarbon ligand framework and only about 35% on the metal center. DFT calculations on various 17 electron rhodium complexes with carbonyl, olefine, or phosphane ligands like [Rh(CO)₄], [Rh(cod)₂], and [Rh(dppe)₂] reveal that in none of these the spin density at the metal center exceeds 45%. That is all formally Rh(0) complexes reported to date are better described as highly delocalized radicals and an assignment of the formal metal oxidation state is not meaningful.     

Carboazidation of chiral allylsilanes: experimental and theoretical investigations

The carboazidation of chiral allylsilanes has been investigated by varying the nature of the substituents at the silicon center and on the carbon framework. The influence of temperature and the nature of the sulfonyl azide, as well as the stereochemistry of the remote stereogenic center, on the 1,2-diastereocontrol of the process were considered. Good to excellent levels of diastereocontrol were generally observed, with the syn-beta-azidosilane always being formed as the major isomer. An illustration of the value of this methodology has been provided with a short and efficient synthesis of an analogue of castanospermine. EPR spectroscopy was carried out on various beta-silyl radicals providing useful information about their conformations in the ground state. Based on this experimental evidence and DFT calculations, reactant-like transition state models were finally proposed that rationalize the observed 1,2-stereoinduction.     

Theoretical and experimental studies of cationized uracil complexes in the gas phase

Cationized uracil clusters were generated in the gas phase by electrospray ionization (ESI). Mass spectrometry experiments showed that with particular experimental conditions, decameric uracil clusters are magic number clusters. MS/MS experiments demonstrated that the structure of these decameric uracil clusters depends substantially on the size and the charge of the cation. On the basis of the ab initio and density functional theory (DFT) quantum chemistry calculations, structures for these decameric clusters were proposed. These structures are in agreement with the experimental mass spectra of modified nucleobases. Theoretical calculations showed that complexes experimentally observed using ESI-MS techniques, are not naturally the most stable in the gas phase.     

Thermal degradation analysis and XRD characterisation of fibre-forming synthetic polypropylene containing nanoclay

Flammability of synthetic fibres is significantly worse than that of bulk polymers because of the high surface area to volume ratio and the low tolerance to high filler loadings in the fibre production process. Introducing nanocomposite structures has the potential to enhance the char formation at relatively low loadings of nanoparticulate fillers and hence can reduce the flammability of synthetic polymers and fibres.This paper reports thermal degradation analysis results in conjunction with TG analysis under different atmospheres and further studies of X-ray diffraction characterisation of fibre-forming polypropylene containing selected dispersed nanoclays.The concentrations of hydrocarbons, carbon monoxide and carbon dioxide released during the TG analysis have been monitored and analysed by using a combined electrochemical infrared analyser. The intensity changes of the crystallinity peaks and nanoclay peaks in the polymer and composites are discussed.     

The origins of volatile oxidation products in the thermal degradation of polypropylene, identified by selective isotopic labeling

Making use of polypropylene samples that are selectively labeled with carbon-13 at each of the three unique positions within the repeating unit, we are conducting mass spectral analyses of the volatile organic oxidation products that are produced when the polymer is subjected to elevated temperature in the presence of air. By examination of both the parent and fragmentation ion peaks in the mass spectrum, we are able to identify the positioning of the C-13 labels within the volatile compounds, and thereby map each compound onto its site of origin from within the macromolecular structure of polypropylene. Most of the organic oxidation products are remarkably specific in terms of their genesis from the polymer. The structural results are discussed in terms of the oxidation chemistry of the macromolecule.     

Oxygen dependent oxidation of trimethoprim by sulfate radical: Kinetic and mechanistic investigations

Trimethoprim (TMP) is a typical antibiotic to treat infectious disease, which is among the most commonly detected antibacterial agents in natural waters and municipal wastewaters. In the present study, the impacts of dissolved oxygen (DO) on the oxidation efficiency and pathways of TMP by reaction with sulfate radicals (SO₄⁻) were investigated. Our results revealed that the presence of DO was favourable for TMP degradation. Specifically, TMP would react initially with SO₄⁻ via electron-transfer process to form a carbon-centered radical. In the absence of oxygen, the carbon-centered radical could undergo hydrolysis to produce α-hydroxytrimethoprim (TMP−OH), followed by the further oxidation which generated α-ketotrimethoprim (TMP=O). However, in the presence of oxygen, the carbon-centered radical would alternatively combine with oxygen, leading to a sequential reaction in which peroxyl radical and a tetroxide were formed, and finally generated TMP−OH and TMP=O simultaneously. The proposed pathways were further confirmed by density functional theory (DFT) calculations. The results obtained in this study would emphasize the significance of DO on the oxidation of organic micro-pollutants by SO₄⁻.     

Synthesis and quadratic molecular hyperpolarizabilities of two new chiral boronates: Computational and experimental study

A monomeric boronate and an oxobridged chiral dimer were obtained by reaction of the ligand derived from 4-diethylaminosalicylaldehyde with (R)-(−)-phenylglycinol, and phenyl boronic acid or boric acid. The compounds were fully characterized by spectroscopic techniques (¹H, ¹³C, ¹¹B NMR, elemental analyses, IR and masses spectrometry); and their molecular hyperpolarizabilities were investigated by the electric field induced second harmonic (EFISH) technique and semi-empirical calculations. The experimental quadratic hyperpolarizability which is equal to 9.8 × 10⁻³⁰ cm⁵ esu⁻¹ at 1.064 μm for the monomeric derivative rises to 19.5 × 10⁻³⁰ cm⁵ esu⁻¹ in the dimeric specie.     

Room-temperature long-lived [Nb2F11] salts of radical cations of simple arenes: EPR, UV-Vis and DFT results

The computed structures of the long-lived radical cation salts [Arene][Nb₂F₁₁] [Arene = 1,4-F₂-2,5-(OMe)₂C₆H₂, 2; 1,4-(OMe)₂C₆H₄, 3; 2,5-(OEt)₂(Me)C₆H₃, 4; C₆H₆, 5] and that of the transient [1,3-(OMe)₂C₆H₄][Nb₂F₁₁], 6, obtained for the gas-phase by DFT at the B3LYP/6-31G∗∗ level, are presented. The degree of inertness observed in chloroform solution seems to increase on decreasing the steric demand of the ring substituents, and may be correlated to the calculated distance between the cation-centroid and the niobium atoms. The room-temperature EPR spectra of 2-4, in CHCl₃, are described in detail; the spectrum of 3 is compared to those of analogous 1,4-dimethoxybenzene radical species reported previously. The EPR spectra display a hyperfine structure due to coupling of the unpaired electron with nuclei belonging to both the cation (H and F in the case of 2) and the anion (F and eventually Nb). The UV-Vis spectra of 2-4 exhibit one strong absorption attributed to the cation and one anion-to-cation charge-transfer band (e.g. for 3 at 398 and 589 nm, respectively). Thermodynamic calculations indicate that the low yield formation of the benzene radical salt 5 occurs with Gibbs free energy variation significantly higher than those involved in the synthesis of 2-4 and 6.     

Theoretical study of the structure and antimicrobial activity of horminone

The structural and electronic parameters of the horminone molecule, an abietan diterpene quinone, were studied by means of all‐electron calculations using Hartree–Fock and density functional theory‐based methods, as implemented in the Gaussian98 program. The 6‐31G orbital basis sets were used for the C, H, O, and Mg atoms. The results allow the identification of the negative site of horminone (HM) most favorable for its binding to the Mg²⁺ ion. The HM–Mg²⁺ complex is assumed to play a significant role in the antibacterial activity. First, it penetrates the membrane cell. Then, through its interaction with rRNA, it inhibits the protein synthesis in several types of bacteria. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 411–421, 2003     

The versatile binding mode of transition-state analogue inhibitors of tyrosinase towards dicopper(II) model complexes: experimental and theoretical investigations

We describe 2-mercaptopyridine-N-oxide (HSPNO) as a new and efficient competitive inhibitor of mushroom tyrosinase (K(IC) =3.7 μM). Binding studies of HSPNO and 2-hydroxypyridine-N-oxide (HOPNO) on dinuclear copper(II) complexes [Cu(2)(BPMP)(μ-OH)](ClO(4))(2) (1; HBPMP=2,6-bis[bis(2-pyridylmethyl)aminomethyl]-4-methylphenol) and [Cu(2)(BPEP)(μ-OH)](ClO(4))(2)) (2; HBPEP=2,6-bis{bis[2-(2-pyridyl)ethyl]aminomethyl}-4-methylphenol), known to be functional models for the tyrosinase diphenolase activity, have been performed. A combination of structural data, spectroscopic studies, and DFT calculations evidenced the adaptable binding mode (bridging versus chelating) of HOPNO in relation to the geometry and chelate size of the dicopper center. For comparison, binding studies of HSPNO and kojic acid (5-hydroxy-2-(hydroxymethyl)-4-pyrone) on dinuclear complexes were performed. A theoretical approach has been developed and validated on HOPNO adducts to compare the binding mode on the model complexes. It has been applied for HSPNO and kojic acid. Although results for HSPNO were in line with those obtained with HOPNO, thus reflecting their chemical similarity, we showed that the bridging mode was the most preferential binding mode for kojic acid on both complexes.     

New Cu(I) Coordination Complexes Based on Tetrathiafulvalene Substituted Triazol‐pyridine Ligand: Synthesis,Properties and Theoretical Studies

Two Cu(I) complexes based on the thioethyl‐bridged triazol‐pyridine ligand with tetrathiafulvalene unit (TTF‐TzPy, L ), [Cu(I)(Binap)(L)]BF₄ ( 5 , Binap=2,2’‐bis(diphenylphosphino)‐1,1’‐binaphthyl) and [Cu(I)(Xantphos)(L)]BF₄ ( 6 , Xantphos=9,9‐dimethyl‐4,5‐bis(diphenylphosphino)‐xanthene), have been synthesized. All new compounds are characterized by elemental analyses, ¹H NMR and mass spectroscopies. The complex 5 has been determined by X‐ray structure analyses which shows that the central copper (I) ion assumes distorted tetrahedral geometry. The photophysical, computational and electrochemical properties of L and 5 ‐ 6 have been investigated. The most representative molecular orbital energy‐level diagrams and the spin‐allowed singlet? singlet electronic transitions of the three compounds have been calculated with density functional theory (DFT) and time‐dependent DFT (TD‐DFT). The luminescence bands of Cu(I) complexes 5 ‐ 6 have been assigned as mixed intraligand and metal‐to‐ligand charge transfer ³(MLCT+π→π^*) transitions through analysis of the photophysical properties and DFT calculations. The electrochemical studies reveal that 5 ‐ 6 undergo reversible TTF/TTF^+?/TTF²⁺ redox processes and one irreversible Cu⁺→Cu²⁺ oxidation process.     

Reactivity of phosphiranes toward nucleophiles: Theoretical and experimental investigations

The thermodynamic and kinetic parameters for the reaction of 1‐methylphosphirane with dimethylphosphide (PMe), proceeding via attack at the ring phosphorus atom to give Me₂P–PMe⁻ plus ethylene, were calculated at the G3(MP2)‐RAD(+) level. The rate constant for this mechanism (k = 1.1 × 10¹³ L mol⁻¹ s⁻¹ at 25°C) is seven orders of magnitude greater than that for the previously studied mechanism involving attack at carbon. Experimental investigations with 1‐phenylphosphirane gave consistent results: Treatment with LiPMePh yielded no detectable polymer, and quenching with MeI gave the known diphosphine (R*, R*)‐(±)/(R*, S*)‐MePhP‐‐PMePh. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:178–181, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20405