Synergistic effect between POSS and fumed silica on thermal stabilities and mechanical properties of room temperature vulcanized (RTV) silicone rubbers

In this paper, both divinyl-hexa[(trimethoxysilyl)ethyl]-POSS (DVPS) and fumed silica were firstly introduced into polydimethylsiloxane (PDMS) system using as the cross-linker and the reinforcing filler respectively. And a series of novel RTV silicone rubbers synergistically enhanced by DVPS and fumed silica were prepared. The cross-linked networks in the novel RTV silicone rubbers have been studied by attenuated total reflection infrared spectroscopy, and the dispersions of POSS and fumed silica in these novel RTV silicone rubbers have been observed by means of scanning electron microscope (SEM). And thermal stabilities, thermo-oxidative stabilities and mechanical properties of these novel RTV silicone rubbers were studied by means of thermal gravimetric analysis and universal tensile testing machine, respectively. From the obtained results, it was found that synergistic effect between POSS-rich areas and fumed silica on thermal stability and mechanical property of RTV silicone rubber indeed existed. And the experimental results also exhibited that the thermal stabilities and mechanical properties of the novel RTV silicone rubbers were far better than those of the reference materials (DVPR and MTFR). The striking enhancements in thermal properties and improvements on mechanical properties of novel RTV silicone rubbers were likely attributed to the synergistic effect between POSS-rich domains and fumed silica. Meanwhile, it was found that the mechanical properties of RTV silicone rubbers prepared with a given amount of POSS cross-linker were enhanced with the increment of the loading amount of fumed silica.     

Synthesis and characterization of novel PDMS nanocomposites using POSS derivatives as cross‐linking filler

We report the synthesis and characterization of novel elastomeric nanocomposites containing polyhedral oligomeric silsesquioxanes (POSS) as both the cross‐linker and filler within a polydimethylsiloxane (PDMS) polymer matrix. These polymer composites were prepared through the reaction of octasilane‐POSS (OS‐POSS) with vinyl‐terminated PDMS chains using hydrosilylation chemistry. In addition, larger super‐POSS cross‐linkers, consisting of two pendant hepta(isobutyl)POSS molecules attached to a central octasilane‐POSS core, were also used in the fabrication of the PDMS composites. The chemical incorporation of these POSS cross‐linkers into the PDMS network was verified by solid‐state ¹H magic angle spinning NMR. Based on dynamic mechanical analysis, the PDMS nanocomposites prepared with the octafunctional OS‐POSS cross‐linker exhibited enhanced mechanical properties relative to polymer systems prepared with the tetrafunctional TDSS cross‐linker at equivalent loading levels. The observed improvements in mechanical properties can be attributed to the increased dimensionality of the POSS cross‐linker. The PDMS elastomers synthesized from the larger super‐POSS molecule showed improved mechanical properties relative to both the TDSS and OS‐POSS composites due to the increased volume‐fraction of POSS filler in the polymer matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2589–2596, 2009     

硅氮聚合物交联剂交联的室温硫化硅橡胶的热稳定性

利用硅氮聚合物作交联剂使双组分缩合型室温硫化硅橡胶在不需要催化剂存在下硫化，通过对硫化胶老化后的热失重、交联密度和力学性能的测定，表明这种硫化胶的耐温性能由２００℃提高到３５０℃．对硫化胶的降解动力学研究表明：降解反应活化能由７０ＫＪ／ｍｏｌ提高到３３０ＫＪ／ｍｏｌ，这是由于消除了端基引发的主链降解．     

PDMS mixed-matrix membranes with molecular fillers via reactive incorporation and their application for bio-butanol recovery from aqueous solution

Mixed-matrix membrane (MMM) consisting of fillers in polymeric matrix offers a promising approach to develop high-performance membranes, while remain challenges in achieving ideal filler dispersion and interfacial morphology. Herein, we reported on a new kind of MMM with molecular-level dispersion of filler via a proposed reactive incorporation approach. Specifically, polyhedral oligomeric silsesquioxanes (POSS) with vinyl groups was grafted with ethoxy groups to build covalent bond with hydroxyl-terminated polydimethylsiloxane (PDMS) chains to fabricate PDMS MMMs uniformly dispersed with POSS molecules. The molecular dispersion of POSS in PDMS matrix was visualized by SEM, AFM, and TEM characterizations, as well as reflected by XRD analysis. The PDMS chain conformation affected by the reactive incorporation of POSS was investigated by analyzing the thermal and mechanical properties of the POSS/PDMS MMMs using DSC, TGA, and DMA measurements. Contact angle test was used to study the surface affinity and positron annihilation technique was employed to probe the free volumes, which are respectively associated with the sorption and diffusion behavior in the POSS/PDMS MMMs. The results demonstrated that molecular cages and crosslinking effect of POSS led to an increase of large free volumes while a decline of small free volumes. Therefore, the PDMS MMM with reactive incorporation of only 2 wt.% POSS simultaneously enhanced the butanol permeability (by 78%) and butanol/water selectivity (by 124%) for pristine PDMS membrane, transcending the performance limit of state-of-the-arts organophilic membranes. The proposed reactive incorporation approach may provide a platform of developing highly efficient membranes for molecular separation.     

Thermal investigation of silicone rubber containing imide-siloxane copolymers

Dynamic mechanical thermal analysis and isothermal thermogravimetry yield useful information on the temperature dependence of the mechanical properties and thermal stability of silicone rubbers. In the thermal mechanical relaxation spectra, only one characteristic phenomenon may be observed. Isothermal thermogravimetry reveals that the thermal degradation is a first-order reaction. The experimental results provide a possibility for the calculation of overall (apparent) reaction rate constants characteristic of the thermal decomposition process, and for the calculation of half-time values.     

Effect of homologous nano-composites on the thermal degradation of the silicone resin

Effect of homologous of nano-composites on the thermal degradation of the silicone resin was researched based on graphene oxide (GO)/polyhedral oligomeric silsesquioxane (POSS). First, the amino-POSS was grafted onto the GO surface (GO/POSS) via the amide bond. Second, GO/POSS was incorporated into the silicone with active epoxy group via chemistry grafting. The reaction kinetics of the thermal decomposition of the epoxy–silicone resin based on nano-composite homologous effect is developed. The initial decomposition temperature of the modified silicone resin is improved by 77.2°C. At high temperatures, GO/POSS-modified silicone molecular end forms homologous nano-structures, which can restrain silicone future degradation. The developed strategy has potential to restrain the degradation of the polymer molecular chain.     

Silicone-enriched surface of immersed polyurethane-POSS antifouling coating

Abstract

A series of waterborne polyurethane-polyhedral oligomeric silsesquioxane (WBPU-POSS) dispersions were synthesized. Different POSS contents were used to evaluate the effect of POSS content on silicone enrichment under both nonimmersed and immersed conditions. The impact of silicone enrichment under immersed conditions on antifouling properties was also evaluated. The structure of the WBPU-POSS coating was identified by FT-IR and ²⁹Si-NMR. X-ray photoelectron spectroscopy (XPS) analysis confirmed a silicone-enriched surface with a certain composition of the WBPU-POSS coating under both nonimmersed and immersed conditions. The mechanical properties, hydrophilicity and hydrolytic degradation of the coating all varied with POSS content. The long-term antifouling performance of immersed coatings depends on surface silicone enrichment, which was found to be above 0.0021?mole POSS content in WBPU-POSS coatings.     

高热稳定性硅橡胶的研究

阐述了在硅橡胶主链中引入硅氮结构,在硅橡胶中添加硅氮化合物或采用硅氮交联剂对改进硅橡胶热稳定性的影响,提出了利用Ｓｉ－Ｎ键的反应去消除引起硅橡胶主链降解的硅羟基和水平达到提高其热稳定性的作用机理。采用阴离子活性聚合的方法合成了具有低玻璃化温度的耐高温的聚硅氧烷弹性体。     

The thermal degradation behaviour of polydimethylsiloxane/montmorillonite nanocomposites

A series of novel polydimethylsiloxane/montmorillonite (PDMS/MMT) nanocomposites was prepared. The thermal degradation behaviour of these nanocomposites was studied by means of Thermal Volatilization Analysis (TVA) and Thermogravimetric Analysis (TGA). The major degradation products were identified as cyclic oligomeric siloxanes from D₃ to D_7, and higher oligomeric siloxane residues. Other minor degradation products include methane, bis-pentamethylcyclotrisiloxane, propene, propanal, benzene and dimethylsilanone. The results demonstrate that the nanoclay significantly alters the degradation behaviour of the PDMS network, modifying the profile of the thermal degradation and reducing the overall rate of volatiles evolution. The results also indicate that the nanoclay promotes the formation of dimethylsilanone and benzene by inducing low levels of radical chain scission.     

Epoxy-POSS/silicone rubber nanocomposites with excellent thermal stability and radiation resistance

Due to the rigid Si-O-Si backbone, silicone rubber (SR) have a widespread application in extreme environment such as high temperature and high-level radiation. However, the radiation stability of SR still does not meet the practical needs in special radiation environments. Herein we prepared epoxy POSS(ePOSS)/SR nanocomposites with excellent thermal stability and radiation resistance. As a physical crosslinking point in the SR, addition of small amount of ePOSS not only enhanced the mechanical properties of the matrix, but also improved its thermal stability greatly due to their good compatibility. ePOSS/SR had higher radiation stability in air than SR owing to the inhibition of radiation oxidation by ePOSS, and the yield of main gaseous radiolysis products (CH₄, H₂, CO and CO₂) of SR and ePOSS/SR nanocomposites was determined. By analyzing the changes of chemical structure, thermal properties and mechanical properties of the ePOSS/SR nanocomposite, combined with the characteristics of gas products after γ-irradiation, the radiation induced crosslinking and degradation mechanism of the nanocomposites was proposed comprehensively.     

Mechanical properties of ormosils

Many organically modified silicates (ormosils) can be prepared by the sol-gel method with very different mechanical properties by varying the ratio of polydimethylsiloxane (PDMS) to tetraethoxysilane (TEOS) contents and processing conditions. With a low PDMS concentration, the ormosils are harder, stiffer and stronger than those with higher concentration of PDMS. Even harder ormosils are possible when ultrasonic irradiation is used during synthesis. As the PDMS concentration is increased, the ormosils take on a more flexible nature, and over a critical concentration actually become rubbery. These new rubbery materials can contain as much as 75% inorganic components, and have more stable mechanical properties than commercial rubbers at elevated temperatures. Effects of PDMS addition to the network structure and mechanical properties of the ormosils were investigated.     

Physical & thermal properties of model polysiloxane rubbers: impact of crosslink density and tin concentration

The influence of the tin octanoate catalyst on the physical and thermal properties of RTV 5370 polysiloxane rubbers has been studied. To assess the likely influence of crosslinking on a number of physical and thermal properties in polysiloxanes, “model siloxane networks” (representing networks of well defined composition/structure) have been formulated by the hydrosilylation of polysiloxane diols of known average molecular weight with tetraethoxysilane curing agent. It was found that linear swell and the crystallisation melting transitions of these systems were both significantly affected by changes in crosslink density. A selection of RTV5370 foamed rubbers with different tin concentrations were prepared in a similar manner to assess the influence of the tin catalyst. For these materials it was found that the area of the crystalline melting transition decreased with increasing tin concentration, an effect indicative of increased crosslinking. Samples with double the standard amount of tin (10% wt catalyst) show a shift in the crystallisation transition to higher temperature with no further effect beyond this concentration. Furthermore, the storage modulus (E') of the rubbers at room temperature appears to be independent of the tin catalyst concentration. Through correlation with the data from the model siloxanes, these results suggests that increasing the catalyst concentration appears to induce additional crosslinking interactions that are stable at low temperatures but not stable at room temperature.     

Effects of silphenylene units on the thermal stability of silicone resins

A series of silicone resins containing silphenylene units were synthesized by a hydrolysis-polycondensation method, with methyltriethoxysilane, dimethyldiethoxysilane and 1,4-bis(ethoxydimethylsilyl)benzene. Their thermal degradation behaviours were studied by thermogravimetric analysis (TGA), differential thermogravimetry (DTG) and Fourier-transform infrared (FTIR) spectroscopy, and the effect of silphenylene units on the thermal stability of silicone resins was also investigated. Results showed that the thermal stability of silicone resins was improved by the introduction of silphenylene units into the backbone. Under nitrogen atmosphere, the temperature for maximum degradation rate of silicone resins with silphenylene units was lower compared to the pure methylsilicone resin. With the increase of silphenylene units, the amount of degradation residues increased under nitrogen atmosphere while it decreased under air atmosphere. Additionally, the short-term and long-term stability of silicone resins were also improved by the introduction of silphenylene units.     

Thermal and dynamic mechanical properties of epoxy resin/poly(urethane‐imide)/polyhedral oligomeric silsesquioxane nanocomposites

Linear isocyanate‐terminated poly(urethane‐imide) (PUI) with combination of the advantages of polyurethane and polyimide was directly synthesized by the reaction between polyurethane prepolymer and pyromellitic dianhydride (PMDA). Then octaaminophenyl polyhedral oligomeric silsesquioxane (OapPOSS) and PUI were incorporated into the epoxy resin (EP) to prepare a series of EP/PUI/POSS organic–inorganic nanocomposites for the purpose of simultaneously improving the heat resistance and toughness of the epoxy resin. Their thermal degradation behavior, dynamic mechanical properties, and morphology were studied with thermal gravimetric analysis (TGA), dynamic mechanical analysis (DMA), and transmission electron microscope (TEM). The results showed that the thermal stability and mechanical modulus was greatly improved with the addition of PUI and POSS. Moreover, the EP/PUI/POSS nanocomposites had lower glass transition temperatures. The TEM results revealed that POSS molecules could self assemble into strip domain which could switch to uniform dispersion with increasing the content of POSS. All the results could be ascribed to synergistic effect of PUI and POSS on the epoxy resin matrix. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel hybrid systems based on poly(propylene-g-maleic anhydride) and Ti-POSS by direct reactive blending

Novel hybrid systems based on maleic anhydride-grafted polypropylene (PPgMA) and home-made Ti-containing amino polyhedral oligomeric silsesquioxanes (Ti-POSS-NH₂) have been prepared by one-step reactive blending, and their properties have been compared with those of systems based on a non-reactive POSS (POSS). The occurrence of a reaction between PPgMA and the reactive POSS molecules has been assessed by Fourier Transform Infrared Resonance (FTIR) measurements, whereas dispersion of POSS into the polymer was evaluated by Scanning Electron Microscopy (SEM), showing a nanometric dispersion only for the reactive POSS. Thermo-oxidative behaviour was studied by Thermogravimetric Analysis (TGA), showing a delayed volatilization of the PPgMA/Ti-POSS-NH₂ with respect to both PPgMA/POSS and pristine PPgMA, which is attributed to the chemical activity of Ti in Ti-POSS-NH₂. To highlight the mechanism of the hybrid system decomposition, samples which underwent a thermal treatment at 250 °C, i.e. the onset temperature for polymer matrix decomposition in thermo-oxidative conditions, have been studied by FTIR and X-Ray Photoelectron Spectroscopy (XPS) measurements.     

Mechanical Properties of Silicone Rubber Using Carbosilane Dendrimers as the Cross-linker

Peroxide-cured high-temperature vulcanized （HTV） silicone rubber was prepared by using allyl-capped carbosilane dendrimers, in which the core molecule is Si（CHaCH=CH2）4, as the cross-linker. It showed that this kind of allyl-capped carbosilane dendrimer improved the mechanical properties of silicone rubber.     

Amphiphilic membranes crosslinked and reinforced by POSS

This article concerns the synthesis and characterization of novel tricomponent amphiphilic membranes consisting of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic polydimethylsiloxane (PDMS) segments cocrosslinked and reinforced by octasilane polyhedral oligomeric silsesquioxane (octasilane‐POSS) cages. Rapid and efficient network synthesis was effected by cocrosslinking diallyl‐telechelic PEG (A‐PEG‐A) and divinyl‐telechelic PDMS (V‐PDMS‐V) with pentamethylpentacyclosiloxane (D₅H), using Karstedt's catalyst in conjunction with Et₃N cocatalyst and water. Films were prepared by pouring charges in molds and crosslinking by heating at 60 °C for several hours. The films were characterized by sol fractions and equilibrium swelling both in hexane and water, extent of crosslinking, contact angle hysteresis, oxygen permeability, thermogravimetric analysis, and mechanical properties. The crosslinking of octasilane‐POSS achieved by the same catalyst system was studied in separate experiments. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4337–4352, 2004     

Poly(dimethylsiloxane)/palygorskite composites: preparation,characterization, and properties

Poly(dimethylsiloxane) (PDMS) composites were prepared by simple blending process using palygorskite (PG) or modified palygorskite (MP). This study has been designed to determine the influences of PG or MP on the thermal stability and the mechanical properties of PDMS composites. The thermal stability of PG and MP were also studied by thermogravimetric analysis (TGA). The results showed that MP had the similar thermal stability to PG, and PG or MP not only increased the thermal stability but also improved the mechanical properties of PDMS composites. Meanwhile, compared with PG/PDMS composites, MP/PDMS composites had better thermal stability and mechanical properties owing to the better dispersion of MP into the matrix, the stronger chemical interfacial interaction between MP and the matrix. Copyright © 2010 John Wiley & Sons, Ltd.     

多苯基三联苯有机硅化合物的合成及其对聚合物耐热性影响的研究

本文通过Diels-Alder反应合成了1,4-双(2′,3′,6′-三苯基,4′-四甲基乙烯基二硅氧基苯基)苯(简称Ⅰ)和1,4-双(2′,3′,6′-三苯基,4′-三乙氧基硅基苯基)苯(Si称Ⅱ)两种新的多苯基三联苯有机硅单体,产率均为80％左右,并作了下列耐热性研究,其结果:(1)把化合物(Ⅰ)作为硅橡胶的热稳定剂,所得硅弹性体在300℃×150小时老化后,具有较好的耐热性和机械性能;(2)化合物(Ⅱ)可以做室温胶的交联剂,所得胶片在300℃×48小时老化,仍保持好的弹性。     

Nanocomposites through copolymerization of a polyhedral oligomeric silsesquioxane and methyl methacrylate

The mechanical properties and thermal stability of polymers can be enhanced through the formation of nanocomposites. Nanocomposites consisting of hybrid copolymers of methacrylcyclohexyl polyhedral oligomeric silsesquioxane (POSS‐1) and methyl methacrylate (MMA) with up to 92 wt % (51 mol %) POSS‐1 and with superior thermal properties were synthesized using solution polymerization. The POSS‐1 contents of the copolymers were similar to or slightly higher than those in the feeds, the polydispersity indices were relatively low, and the degree of polymerization decreased with increasing POSS‐1 content. POSS‐1 enhanced the thermal stability, increasing the degradation temperature, reducing the mass loss, and preventing PMMA‐like degradation from propagating along the chain. The mass loss was reduced in a high POSS‐1 content copolymer since the polymerization of POSS‐1 with itself reduced sublimation. Exposure to 450 °C produced cyclohexyl‐POSS‐like remnants in the POSS‐1 monomer and in all the copolymers. The degradation of these remnants, for the copolymers and for the POSS‐1 monomer, yielded 75% SiO₂ and an oxidized carbonaceous residue. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4264–4275, 2007