Effect of the urethane group on treated clay surfaces for high-performance poly(butylene succinate)/montmorillonite nanocomposites

We successfully modified organic clays containing the urethane group by introducing a covalent bond between the silanol group on the clay side and the hydroxyl group of organic modifier in the silicate layer using 1,6-diisocyanatohexane (HDI), namely surface-treated montmorillonite (30BM), to increase both basal spacing and the favorable interaction between clay and polymer. The effect of the surface urethane modification of clay on poly (butylene succinate) (PBS)/30BM nanocomposites was studied. The results of transmission electron microscopy micrographs at a 10-nm resolution and X-ray diffraction measurements allowed us to examine the degree of the high exfoliation and the effect of surface urethane modification on clay dispersibility. As results of high exfoliation, PBS/30BM nanocomposites not only exhibited the high thermal properties, but also showed a remarkable increase in physical properties (e.g., tensile strength, Young's modulus, elongation at break) due to enhanced affinity between the clay and PBS matrix. Over all, the results suggest that wide gallery spacing and the predominant affinity between PBS and clay must be considered simultaneously to increase the degree of exfoliation and physical properties as key factors.     

New insight into the crystallization behavior of poly(ethylene terephthalate)/clay nanocomposites

Crystallization behavior of poly(ethylene terephthalate) (PET)/clay nanocomposites has been investigated in terms of differential scanning calorimeter (DSC) analysis, polarizing optical microscopy (POM), and scanning electron microscopy (SEM) observation. The nanocomposites for investigation were prepared via in situ polycondensation. Crystalline morphologies were observed through POM and SEM. The nonisothermal and isothermal crystallization rates of different samples were determined for comparison based on DSC data. Secondary nucleation analysis was also performed based on bulk crystallization data derived from DSC analysis. The results revealed that nucleating abilities of montmorillonites (MMT) depended on the dispersion state of clay in matrix, the surface modification status, and the metallic derivatives released from MMT during in situ synthesis. The quantities of metallic elements released were measured by inductively coupled plasma (ICP) analysis. The results showed that the release of these metallic derivatives was also affected by surfactant molecules anchored on the surface of MMT. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2380–2394, 2008     

Isothermal crystallization kinetics of polypropylene latex–based nanocomposites with organo‐modified clay

The effect of organo‐modified clay (Cloisite 93A) on the crystal structure and isothermal crystallization behavior of isotactic polypropylene (iPP) in iPP/clay nanocomposites prepared by latex technology was investigated by wide angle X‐ray diffraction, differential scanning calorimetry and polarized optical microscopy. The X‐ray diffraction results indicated that the higher clay loading promotes the formation of the β‐phase crystallites, as evidenced by the appearance of a new peak corresponding to the (300) reflection of β‐iPP. Analysis of the isothermal crystallization showed that the PP nanocomposite (1% C93A) exhibited higher crystallization rates than the neat PP. The unfilled iPP matrix and nanocomposites clearly shows double melting behavior; the shape of the melting transition progressively changes toward single melting with increasing crystallization temperature. The fold surface free energy (σ_e) of polymer chains in the nanocomposites was lower than that in the PP latex (PPL). It should be reasonable to treat C93A as a good nucleating agent for the crystallization of PPL, which plays a determinant effect on the reduction in σ_e during the isothermal crystallization of the nanocomposites. The activation energy, ΔE_a, decreased with the incorporation of clay nanoparticles into the matrix, which in turn indicates that the nucleation process is facilitated by the presence of clay. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1927–1938, 2010     

Crystallization studies of isotactic polypropylene containing nanostructured polyhedral oligomeric silsesquioxane molecules under quiescent and shear conditions

Crystallization studies at quiescent and shear states in isotactic polypropylene (iPP) containing nanostructured polyhedral oligomeric silsesquioxane (POSS) molecules were performed with in situ small‐angle X‐ray scattering (SAXS) and differential scanning calorimetry (DSC). DSC was used to characterize the quiescent crystallization behavior. It was observed that the addition of POSS molecules increased the crystallization rate of iPP under both isothermal and nonisothermal conditions, which suggests that POSS crystals act as nucleating agents. Furthermore, the crystallization rate was significantly reduced at a POSS concentration of 30 wt %, which suggests a retarded growth mechanism due to the molecular dispersion of POSS in the matrix. In situ SAXS was used to study the behavior of shear‐induced crystallization at temperatures of 140, 145, and 150 °C in samples with POSS concentrations of 10, 20, and 30 wt %. The SAXS patterns showed scattering maxima along the shear direction, which corresponded to a lamellar structure developed perpendicularly to the flow direction. The crystallization half‐time was calculated from the total scattered intensity of the SAXS image. The oriented fraction, defined as the fraction of scattered intensity from the oriented component to the total scattered intensity, was also calculated. The addition of POSS significantly increased the crystallization rate during shear compared with the rate for the neat polymer without POSS. We postulate that although POSS crystals have a limited role in shear‐induced crystallization, molecularly dispersed POSS molecules behave as weak crosslinkers in polymer melts and increase the relaxation time of iPP chains after shear. Therefore, the overall orientation of the polymer chains is improved and a faster crystallization rate is obtained with the addition of POSS. Moreover, higher POSS concentrations resulted in faster crystallization rates during shear. The addition of POSS decreased the average long‐period value of crystallized iPP after shear, which indicates that iPP nuclei are probably initiated in large numbers near molecularly dispersed POSS molecules. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2727–2739, 2001     

Degradable polyoctamethylene suberate/clay nanocomposites. Crystallization studies by DSC and simultaneous SAXS/WAXD synchrotron radiation

Several organo-modified montmorillonites were studied to prepare nanocomposites of polyoctamethylene suberate, a biodegradable polyester. Mixtures were analyzed by conventional powder X-ray diffraction and transmission electron microscopy techniques. C30B clay was effective in rendering an intercalated structure with rather variable silicate layer spacing. The hydroxyl groups of the organo-modifier may allow the establishment of good interactions with the polar carbonyl groups of the studied polyester. A slight decrease in thermal stability was detected when the modified clay was incorporated into the polymer matrix. Isothermal and nonisothermal crystallization kinetics were studied by DSC and results compared with those for the neat polyester. The overall crystallization rate determined by calorimetric methods depends on the nucleation density and the crystal growth rate, which were independently evaluated by means of optical microscopy. Crystallization and morphological features were also analyzed by simultaneous SAXS/WAXD measurements made at a selected crystallization temperature and cooling rate under both isothermal and nonisothermal conditions, respectively.     

Crystallization kinetics and morphology of poly(butylene succinate‐co‐adipate)

The crystallization kinetics of biodegradable poly(butylene succinate‐co‐adipate) (PBS/A) copolyester was investigated by using differential scanning calorimetry (DSC) and polarized optical microscopy (POM), respectively. The Avrami and Ozawa equations were used to analyze the isothermal and nonisothermal crystallization kinetics, respectively. By using wide‐angle X‐ray diffraction (WAXD), PBS/A was identified to have the same crystal structure with that of PBS. The spherulitic growth rates of PBS/A measured in isothermal conditions are very well comparable with those measured by nonisothermal procedures (cooling rates ranged from 0.5 to 15 °C/min). The kinetic data were examined with the Hoffman–Lauritzen nucleation theory. The observed spherulites of PBS/A with different shapes and textures strongly depend on the crystallization temperatures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3231–3241, 2005     

聚丁二酸丁二醇酯的自成核结晶行为

利用差示扫描量热仪(DSC)研究了自成核对聚丁二酸丁二醇酯(PBS)的结晶行为的影响. 研究结果表明, PBS的有效自成核温度处理区间为118～120 ℃. PBS经自成核处理后结晶温度提高, 可以在100~118 ℃温度区间内迅速结晶. 同时, 研究了自成核处理后样品在100～104 ℃范围内的等温结晶行为、动力学过程及熔融行为. 结果表明, 随着等温结晶温度的升高, 结晶速率变慢, 熔融曲线出现多重熔融峰. Hoffman-Weeks方程分析结果表明, 自成核处理对PBS的平衡熔点没有影响. Avrami等温结晶动力学方程适合分析自成核处理样品的等温结晶动力学过程, 获得其动力学参数K与n, 其中n值偏大的原因在于自成核的样品结晶生长点增多. 根据Arrhenius方程, 计算获得PBS自成核处理后等温结晶活化能为-286 kJ/mol.     

Crystallization behavior of clay nanocomposites prepared from a degradable alternating copolyester constituted by glycolic acid and 6‐hydroxyhexanoic acid

An exfoliated nanocomposite was prepared by the film‐casting technique from C25A organo‐modified clay and a new biodegradable polyester derived from glycolic acid and 6‐hydroxyhexanonoic acid. This polyester has a sequential monomer distribution and high crystallinity, allowing a detailed study of its isothermal crystallization. The influence of the clay on the crystallization behavior was investigated by optical microscopy, simultaneous SAXS/WAXD synchrotron radiation and FTIR spectroscopy. Primary nucleation and crystal growth rate decreased significantly with the incorporation of nanoparticles. In addition, the overall crystallization rate of the nanocomposite was logically lower than that of the neat polyester. Bulk crystallizations were modeled from FTIR data with the Avrami equation. The results showed spherulite growth geometry and predetermined (heterogeneous) nucleation for both samples. Morphological studies revealed that both the crystal and the amorphous layer thicknesses were influenced by the presence of silicate layers. The overall percentage of crystallinity and the size of crystalline domains decreased with the addition of the highly miscible organoclay. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 33–46, 2010     

Crystallization kinetics and crystallization behavior of syndiotactic polystyrene/clay nanocomposites

We investigated the effects of montmorillonite (clay) on the crystallization kinetics of syndiotactic polystyrene (sPS) with isothermal differential scanning calorimetry analyses. The clay was dispersed into the sPS matrix via melt blending on a scale of 1–2 nm or up to about 100 nm, depending on the surfactant treatment. For a crystallization temperature of 240 °C, the isothermal crystallization data were fitted well with the Avrami crystallization equation. Crystallization data on the kinetic parameters (i.e., the crystallization rate constant, Avrami exponent, clay content, and clay/surfactant cation‐exchange ratio) were also investigated. Experimental results indicated that the crystallization rate constant of the sPS nanocomposite increased with increasing clay content. The clay played a vital role in facilitating the formation on the thermodynamically more favorable all‐β‐form crystal when the sPS was melt‐crystallized. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2097–2107, 2001     

Nonisothermal crystallization and morphology of poly(butylene succinate)/layered double hydroxide nanocomposites

Biodegradable poly(butylene succinate) (PBS) and layered double hydroxide (LDH) nanocomposites were prepared via melt blending in a twin-screw extruder. The morphology and dispersion of LDH nanoparticles within PBS matrix were characterized by transmission electron microscopy (TEM), which showed that LDH nanoparticles were found to be well distributed at the nanometer level. The nonisothermal crystallization behavior of nanocomposites was extensively studied using differential scanning calorimetry (DSC) technique at various cooling rates. The crystallization rate of PBS was accelerated by the addition of LDH due to its heterogeneous nucleation effect; however, the crystallization mechanism and crystal structure of PBS remained almost unchanged. In kinetics analysis of nonisothermal crystallization, the Ozawa approach failed to describe the crystallization behavior of PBS/LDH nanocomposites, whereas both the modified Avrami model and the Mo method well represented the crystallization behavior of nanocomposites. The effective activation energy was estimated as a function of the relative degree of crystallinity using the isoconversional analysis. The subsequent melting behavior of PBS and PBS/LDH nanocomposites was observed to be dependent on the cooling rate. The POM showed that the small and less perfect crystals were formed in nanocomposites.     

CRYSTALLIZATION OF BLENDS OF AN ASYMMETRIC POLY（OXYETHYLENE）-b-POLY（OXYBUTYLENE） BLOCK COPOLYMER WITH POLY（OXYBUTYLENE）

An oxyethylene/oxybutylene block copolymer with asymmetric volume fraction (E115B103) was blended with oxybutylene homopolymer (Bh) at different volume fractions of the block (φE). Crystallization behavior of the blends was studied and was compared with that of the blends from a symmetric block copolymer (E114B56). It was found that the crystallization temperature of E115B103/B28 blend is lower than that of the blends from symmetric block copolymer. For the blend with φE= 0.30 breakout crystallization with an Avrami exponent n ≈ 3.0 is observed. At φE = 0.22 the blend exhibits a variable crystallization behavior: confined crystallization with n ≈ 1.0 at lower crystallization temperatures but breakout crystallization at high crystallization temperatures. For the blend with φE = 0.14 and sphere morphology confined crystallization occurs at all crystallization temperatures studied. When compared with the blends from symmetric block copolymer, confined crystallization occurs more easily in the E115B103/B28 blends. The SAXS results agree with the isothermal crystallization kinetics. Deformation of the confined crystalline block is observed in the blend with φE = 0.14 and mixed lamellar and cylinder morphologies in the blend with φE = 0.22.     

Phase behavior of modified montmorillonite– poly(ϵ‐caprolactone) nanocomposites

The thermal behavior and overall isothermal crystallization kinetics of a series of organophilic modified montmorillonite–poly(?‐caprolactone) nanocomposites were investigated. In general, the thermal behavior was influenced more by the type of dispersion than by the clay content. For nanocomposites in which silicate platelets were predominantly dispersed in the polymer matrix to give exfoliated structures, the thermal properties were improved with respect to those of neat poly(?‐caprolactone), whereas in those cases in which simply intercalated structures were attained, the thermal properties regularly decayed as the clay content increased. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1321–1332, 2004     

Effect of Carboxylic Acid Nucleating Agent on Crystallization and Mechanical Properties of PLA/PBS Blends

Poly(lactic acid) (PLA)/poly(butylene succinate) (PBS) blends were prepared using a carboxylic acid salt as nucleating agent (NA). The effect of NA on the crystallization kinetics of PLA and PLA/PBS blend was investigated using a differential scanning calorimeter, a polarized optical microscope and a wideangle X-ray diffractometer. The crystallization rate of PLA component in PLA/PBS blends is increased effectively by NA through fast nucleation and growth rate of PLA α'-form crystal, which is confirmed by isothermal crystallization behavior of PLA/PBA/NA composites. The isothermal crystallization results also show that the incorporation of NA induces heterogeneous nucleation mechanism in PLA component. The increased number of crystal nuclei hinders the increase of average grain size of PLA component in composites but contributes to a higher crystallinity of both PLA and PBS components in PLA/PBS blends. Finally, the mechanical properties and dynamic mechanical properties of PLA/PBS/NA composites are improved because of the increased crystallinity, which are superior to that of PLA/PBS blend.     

Isothermal crystallization of layered silicate/starch-polycaprolactone blend nanocomposites

The isothermal crystallization behavior of layered silicate/starch-polycaprolactone blend nanocomposites was studied by means of differential scanning calorimetry (DSC) measurements. The theoretical melting point was higher for the matrix than for nanocomposites. At low clay concentration, the induction time decreased and the overall crystallization rate increased acting as nucleating agent whereas at higher concentrations became retardants. Classical Avrami equation was used to analyze the crystallization kinetic of these materials. n values suggested that clay not only affected the crystallization rate but also influenced the mechanism of crystals growth. An Arrhenius type equation was used for the rate constant (k). Models correctly reproduced the experimental data.     

Influence of ionic association on the nonisothermal crystallization kinetics of sodium sulfonate poly(butylene succinate) ionomers

We evaluated the relationship between the ionic substituents and nonisothermal crystallization behavior in poly(butylene succinate) (PBS) ionomers, synthesized by the introduction of sulfonated dimethyl fumarate (SDMF) with sodium sulfonate. In addition, we investigated the effect of sodium ions on the molecular structure of the PBS backbone by solid‐state ²³Na NMR analysis. Sodium ion aggregates (multiplets) was predominately created with the ionic group concentration, and melt rheology and dynamic melt analysis results showed that multiplet formation induced not only remarkable heterogeneity, but also a high degree of clustering in the PBS chains. At low ionic group concentration, well dispersed multiplets behaved as effective nuclei during the crystallization of the PBS ionomer and accelerated the rate of crystallization. As ionic group concentration grew higher, crystallization rates decreased due to hindered chain mobility by clusters consisting of numerous multiplets. A combined Ozawa and Avrami equation proved to be more effective than the Ozawa equation in describing the nonisothermal crystallization kinetics of PBS and its ionomers. The observed nucleation activity indicates that the nonisothermal crystallization rate is not directly proportional to the ionic group concentration. Superior nucleation activity was observed in PBS ionomer containing 1 mol % SDMF. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 925–937, 2008     

HYDROGEN-BONDING INDUCED CHANGE OF CRYSTALLIZATION BEHAVIOR OF POLY（BUTYLENE SUCCINATE） IN ITS MIXTURES WITH BISPHENOL A

In the present work, the blend of poly（butylene succinate） （PBS） and bisphenol A （BPA） was prepared by solution mixing, and the intermolecular interactions between the two components were characterized by a combination of nuclear magnetic resonance （NMR） and Fourier transform infrared spectroscopy （FTIR）. The results showed that intermolecular hydrogen-bonding forms between the carbonyl group of PBS and phenol hydroxyl of BPA. With the increase of BPA content, more hydrogen bonds were formed. The effect of hydrogen bonding on the crystallization behavior of PBS was investigated by differential scanning calorimetry （DSC） and polarized optical microscopy （POM）. The results showed that the overall isothermal crystallization kinetics and the spherulite growth rate of PBS decrease with the increase of BPA content, while the PBS spherulite size increases with BPA content.     

The crystallization behavior of biodegradable poly(butylene succinate) in the presence of organically modified clay with a wide range of loadings

The crystallization behavior of poly(butylene succinate)(PBS) nanocomposites with a wide range of contents of clays was revealed. It was of interest to find that the crystallization rate of PBS was accelerated obviously at relatively low contents of clays; while a retarded crystallization kinetics and a decreased crystallinity of PBS were found in the nanocomposites with higher clay contents. Two interplaying effects existed in the nanocomposites, i.e., a suppression effect of clays on nucleation and a templating effect of clays on crystal growth, were clarified to contribute to this intriguing crystallization behavior.     

Confirmation of a nanohybrid shish‐kebab (NHSK) structure in composites of PET and MWCNTs

Here, the confirmation of an oriented nanohybrid shish‐kebab (NHSK) crystalline structure in a series of composites of poly(ethylene terephthalate) (PET) and multiwall carbon nanotubes (MWCNTs) is reported. The combined use of small‐ and wide‐angle X‐ray scattering (SAXS/WAXS) and thermal analysis has been used to investigate the morphology development in PET‐MWCNT nanocomposites under hot isothermal crystallization conditions. The MWCNTs act as both heterogeneous nucleating agents and surfaces (oriented shish structures) for the epitaxial growth of PET crystallites (kebabs) giving an oriented crystalline morphology. In contrast, the PET homopolymer does not show any residual oriented crystalline morphology during isothermal crystallization but gave a sporadic nucleation of a classic unoriented lamellar structure with slower crystallization kinetics. The results provide a valuable insight into the role of MWCNTs as nanoparticulate fillers in the morphology development and subsequent modification of physical properties in engineering polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 132–137     

生物可降解聚丁二酸/甲基丁二酸丁二酯系列共聚物的合成和表征

摘要合成了一系列聚丁二酸/甲基丁二酸丁二醇共聚酯(PBSM), 利用DSC, ¹H NMR和X射线衍射等方法对共聚物组成、 热学性能、 结晶性能、 等温结晶行为进行了研究. 结果表明, 引入甲基丁二酸共聚单元较为显著地改变了聚丁二酸丁二酯(PBS)的热学性能, 利用Hoffman\|Weeks方程得到的共聚物平衡熔点随共聚物的组分含量增加而降低, 玻璃化转变温度亦有所降低, 熔点则符合无规共聚物的Flory方程. 此外, 利用Avrami方程分别研究了均聚物PBS及共聚物PBSM-20的等温结晶行为, 结果表明, 在所研究的温度范围内, 聚酯结晶速率随温度升高而降低, PBS和PBSM\-20的Avrami指数分别介于2.8~3.0和2.7~3.0之间, 结晶方式为三维生长异相成核, 而X射线衍射测试结果表明晶体结构几乎不变.     

Cold crystallization behavior of polyamide 6 in PS‐g‐PA6 graft copolymers

TEM micrographs show that the PA grafts of PS‐g‐PA6 graft copolymers, which are obtained directly by extracting homo‐PA6 out from the homo‐PA6/PS‐g‐PA6 blends, are in the form of wormlike structure. The wormlike PA6 domains can shrink into droplets after annealing at 250 °C for 15 min. The diameter of the droplet determined by TEM and SAXS is in the range of 50–60 nm. This article reports on a unique crystallization behavior of the PA6 grafts in PS‐g‐PA6 graft copolymers. In a DSC cooling scan, PA6 grafts do not crystallize from the melt with a cooling rate of 10 °C/min. However, there is a cold crystallization peak around 65 °C in the subsequent heating scan. This cold crystallization phenomenon, which has not yet been reported in the literature till now, follows well the homogeneous nucleation mechanism and is depressed at relatively slow cooling rates (2 °C/min) or even completely eliminated after annealing within a specific temperature range. It may be caused by the slow diffusion or transport rate of the less flexible PA6 grafts to the crystal fronts when crystallization takes place around its glass transition temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 65–73, 2010