Study of the mechanism of intumescence in fire retardant polymers: Part II—Mechanism of action in polypropylene-ammonium polyphosphate-pentaerythritol mixtures

It is shown that, by the addition of a typical intumescent mixture of ammonium polyphosphate and pentaerythritol to polypropylene, the mechanism of intumescence which develops on heating is not significantly affected by dispersion of the intumescent mixture in the polymer. On the other hand, in these mixtures, polypropylene seems to evolve, by thermal degradation, a smaller amount of flammable products than when it is heated alone. The ammonium polyphosphate-pentaerythritol additive is shown to induce fire retardant characteristics in polypropylene by means of a ‘condensed phase’ mechanism.     

Neutralized flame retardant phosphorus agent: Facile synthesis, reaction to fire in PP and synergy with zinc borate

A neutralized intumescent fire retardant (NIFR) has been synthesized in “one step and one pot” using a simple, novel and safe protocol. The fire retardant efficiency of the NIFR in polypropylene (PP) has been evaluated using usual fire testing methods. The results show that the NIFR is very effective. Moreover, we demonstrate that zinc borate exhibits a synergistic effect on fire retardant properties and apparently prevents migration of the additives through the polymer matrix.     

Study of the mechanism of intumescence in fire retardant polymers: Part III—Effect of urea on the ammonium polyphosphate-pentaerythritol system

Urea, which is commonly used as a ‘blowing’ co-additive in intumescent coatings, is shown to depress intumescence when it is added to ammonium polyphosphate-pentaerythritol mixtures incorporated into the bulk of polypropylene. Concurrently, the fire retardant properties of the intumescent additive are depressed in the presence of urea although, in this case, a smaller amount of flammable hydrocarbons is evolved in the thermal degradation of the polymer.     

Fire protection of polypropylene and polycarbonate by intumescent coatings

An innovative way to improve fire‐retardant properties of different polymers by applying intumescent coatings on their surface has been studied. Two polymers have been investigated: polypropylene and polycarbonate. The surfaces were first subjected to a flaming treatment in order to clean them and to increase their wettability and thus improve the adhesion of the coatings. Two different formulations were then applied: a transparent intumescent varnish, based on an acrylic resin, and an intumescent coating based on polyvinylacetate resin. Different parameters have been obtained using several fire tests. The cone calorimeter, the limiting oxygen index and UL94 tests have been carried out to evaluate the fire‐retardant properties obtained for both the intumescent coating and the intumescent varnish. Results clearly evidence an outstanding improvement of the fire‐retardant properties using intumescent coatings without any incorporation of flame retardants in the bulk. Copyright © 2010 John Wiley & Sons, Ltd.     

交联三嗪类聚合物的制备及其成炭性研究

通过异氰尿酸三缩水甘油酯与三聚氰胺的本体熔融聚合反应,合成了一种交联结构的三嗪类聚合物成炭剂,它显示出良好的热稳定性和耐水性,其制备过程不需溶剂,简单易行,且无有害物质排放.这种新型交联聚合物与聚磷酸铵复配(质量比1:5)而组成的膨胀型阻燃剂,应用于聚丙烯阻燃.当膨胀阻燃剂用量为阻燃聚丙烯的32%时,燃烧测试分析表明,所获得的炭层展现出致密连续的结构,其阻燃氧指数达到32,垂直燃烧FV-0,热释放速率峰值为486kJ/m2,比纯PP降低了47.5%,而有焰燃烧时间为714s,比纯聚丙烯增加54.9%.     

Influence of surface modification of fillers and polymer on flammability and tensile behaviour of polypropylene-composites

An intumescent system consisting of ammonium polyphosphate (APP) as an acid source and blowing agent, pentaerythritol (PER) as a carbonific agent and natural zeolite (clinoptilolite, Gördes II) as a synergistic agent was used in this study to enhance flame retardancy of polypropylene (FR-PP). Zeolite was incorporated into flame retardant formulation at four different concentrations (1, 2, 5, and 10 wt%) to investigate synergism with the flame retardant materials. Filler content was fixed at 30 wt% of total amounts of flame retardant PP composites. Zeolite and APP were treated with two different coupling agents namely, 3-(trimethoxysilyl)-1-propanethiol and (3-aminopropyl)-triethoxysilane for investigation of the influence of surface treatments on mechanical properties and flame retardant performance of composites. Maleic anhydride grafted polypropylene (MAPP) was used for making polypropylene hydrophilic. Flammability of FR-PP composites was measured by the determination of limiting oxygen index (LOI). The LOI values reached to a maximum value of 41% for mercapto silane treated APP:PER (2:1) PP composite containing 5 wt% zeolite. The tensile strength of composites was increased by the addition of MAPP and elongation at break of composites was increased with silane treatments.     

Effects of carbon nanotubes on the thermal stability and flame retardancy of intumescent flame-retarded polypropylene

Flame retardant mixtures of carbon nanotubes (CNTs) and intumescent flame retardant (IFR) were embedded in polypropylene (PP) to investigate what will happen if the additives exhibit two different flame retardation mechanisms. TEM tests showed that CNTs dispersed homogenously in PP matrix without any visible agglomeration. The effects of CNTs on thermal stability and flammability of PP were investigated by thermogravimetry (TG) and cone calorimetry tests, respectively. Results indicated that the introduction of CNTs only enhanced thermal stability of materials in a certain temperature range, but caused a severe deterioration of flame retardancy due to the interaction of the network structure and the intumescent carbonaceous char. Furthermore, conditions for an intumescent flame retardation system to behave with high efficiency were also discussed by a secondary combustion test.     

Synthesis of a novel hybrid synergistic flame retardant and its application in PP/IFR

A novel inorganic-organic hybrid synergistic flame retardant was prepared by sol-gel reaction and characterized by NMR and FT-IR. It showed that the fire resistance of polypropylene/intumescent flame retardant (PP/IFR) composites could be improved with the combination of hybrid synergistic flame retardant. The char morphology and structure of PP composites were characterized by SEM and Raman spectra. The influence of the hybrid flame retardant on the thermal degradation process of PP composites was analyzed by FT-IR and the rheological behavior of the PP composites was also evaluated. The thermal stability of PP composites was characterized by TGA, weight loss difference and integral procedural decomposition temperature (IPDT). It indicated that the hybrid synergistic flame retardant had good synergistic effect with IFR.     

Effect of Phosphorus-Nitrogen Intumescent Flame Retardant on Structure and Properties of Poly(propylene)

Summary : Phosphorus-nitrogen intumescent product (R₂₀₀₀) was filled into polypropylene (PP) as a flame retardant. The neat PP and flame-retarded PP blends were studied for their structural and mechanical properties after verification of the flame retardancy character of blends. In this paper, the influence of incorporation of different amount (5%, 10%, 15%, 20%, and 25%) of R₂₀₀₀ was studied. The flame retardancy is evaluated by limiting oxygen index (LOI) value, which is enhanced from 17.5 for pure PP to 22.7 for the blend comprising 15% intumescent product, phosphorus-nitrogen based (R₂₀₀₀). The thermal degradation behaviour of the PP/R₂₀₀₀ blends was investigated using thermogravimetric analysis (TGA) under nitrogen (N₂) and oxygen (O₂) atmospheres. The influence of the R₂₀₀₀ on the PP crystallization was examined by X-ray diffraction (XRD) and differential scanning calorimetry (DSC). Further, the mechanical properties of the materials were studied by dynamic mechanical analysis (DMA). The incorporation of the flame retardant had no effect on the crystallization of the neat polymer and the mechanical properties of the materials remained unaffected.     

Efficient approach to enhancing the fire resistance of polypropylene by modified microporous aluminosilicate from kaolinite as synergist

In this work, kaolinite (K) was firstly converted to one kind of microporus aluminosilicate (4A) by a green andeconomical method, which was thenacted as the precursor to synthesize two other microporus aluminosilicate (3A and 5A) by ions exchange. After modified and loaded with one kind of rare earth ion (La³⁺), the final product (A‐La) was then used as synergist to enhance fire retardant property for polypropylene (PP) with intumescent flame‐retardants (IFR). The properties of PP composites for thermal stability and flame retardant were studied and demonstrated that A‐La, especially 4A‐La, had the most obviously flame‐retardant effect. Meanwhile, the macro/micro‐structure of char residues and real‐time fourier transform infrared spectroscopy (FTIR) after heating also showed that A‐La were helpful to promote the formation of homogenous and compact intumescent char layer. This dense carbon layer can effectively control the convection of combustion gases mixture, and heat transfer between underlying matrix and outside environment.     

Thermal and flame retardant properties of novel intumescent flame retardant polypropylene composites

Novel intumescent flame retardant polypropylene (PP) composites were prepared based on a char forming agent (CFA) and silica-gel microencapsulated ammonium polyphosphate (Si-MCAPP). The thermal and flame retardancy of flame retardant PP composites were investigated by limiting oxygen index, UL-94 test, cone calorimetry, thermogravimetric analysis, scanning electron micrograph, and water resistance test. The results of cone calorimetry show that the flame retardant properties of PP with 30 wt% novel intumescent flame retardants (CFA/Si-MCAPP = 1:3) improve greatly. The peak heat release rate and total heat release decrease, respectively, from 1,140.0 to 156.8 kW m^?2 and from 96.0 to 29.5 MJ m^?2. The PP composite with CFA/Si-MCAPP = 1:3 has the excellent water resistance, and it can still obtain a UL-94 V-0 rating after 168 h soaking in water.     

A facile strategy to fabricate intumescent fire-retardant and smoke suppression protective coatings for natural rubber

As flammable natural rubber (NR) becomes more ubiquitous in industrial fields, there is a growing need for safe and effective flame retardant treatments through efficient techniques. Remarkably, our developed highly efficient natural tannic acid (TA)-based intumescent flame-retardant system (AGT) has the unique function in the rubber flame retardant aspect. Meanwhile, the developed coating method through polyurethane elastomer (PU) both as adhesive medium and a carbonforming agent can not only minimize the influence of flame retardant on the desirable intrinsic properties of base polymer and also maximize the efficiency of flame retardant. The flame-retardant coating (AGT/PU) exhibits highly efficient flame retardant performances reflected by a 31.9% reduction in peak heat release rate and a 27.3% reduction in total heat release and a 26.2% reduction in total smoke production with 50 wt% loading in 1 mm thick coating due to synergistic flame retardant effects. More importantly, the excellent flame retardancy performance are obtained by the PU@AGT10, as reflected in flame retardancy index (FRI) value of 11.88 makes it as excellent flame retardancy performance. While many physically mixed flame retardants are usually seriously detrimental to mechanical properties of NR, the influence of AGT/PU coating on mechanical properties of NR decreases obviously because fire retardant just directly impacts on PU adhesive layer rather than NR matrix, and the reinforcement function of graphene is also much significant. Moreover, the coating method requires just less flame retardant to achieve high flame retardant effect for NR. These findings suggest that significant opportunities for flame retardant polymer materials in industry.     

Roles of organic intercalation agent with flame retardant groups in montmorillonite (MMT) in properties of polypropylene composites

Three kinds of organic intercalation agent containing flame retardant groups, melamine (MA), triphenylphonium (TPP) chloride, and tetradecyl trihexyl phosphonium (TTP) bromide were intercalated into montmorillonite (MMT) via cation exchange reactions. These modified MMTs are combined with intumescent systems and compounded with PP. The flame retardant and thermal properties of the PP composites are studied. The organic intercalation agents in the layers of MMT play important roles in the char formation and flame retardant properties of PP composites. MA shows a better performance in limiting oxygen index (LOI) value and TPP helps to increase UL‐94 properties, whereas TTP maintains or deteriorates the flame retardancy of polypropylene/intumescent flame retardant (IFR) composites. The LOI and UL‐94 properties increase firstly and then decrease as the content of MMT increases. The MA acts as a blowing agent and emits an inert gas to provide migration impetus, which results in a better intumescent structured and stronger char to endure heat erosion. Although TPP and TTP emit combustible gas that burn, especially for TTP as it has a more flammable aliphatic chain. The synergistic effect between MA‐MMT and IFR is better than that for TPP‐MMT and TTP‐MMT. Copyright © 2014 John Wiley & Sons, Ltd.     

Intumescent flame retardants for polymers. II. The polypropylene-ammonium polyphosphate-polyurea system

The mechanism of action of ammonium polyphosphate (APP) and polyurea (PU) as flame retardant (FR) agents for polypropylene (PP) was examined. The APP–PU system behaves as an intumescent flame-retardant (IFR) formulation. Comparison of the oxygen index (OI) measured on molded pellets and rods, values of the polymer temperature measured just below the burning surface, and visual considerations describe the IFR action of this system. A strong synergism between APP and two of the four polyureas investigated here was ascertained with a maximum 3:1 ratio. Thermogravimetric (TG), OI, nitrous oxide index (NOI), and char-residue measurements were made. On the basis of our data, it can be concluded that polyurea acts as a catalyst for the charring reactions of the APP on PP.     

The investigation of intumescent flame-retarded polypropylene using poly(hexamethylene terephthalamide) as carbonization agent

A novel intumescent flame retardant, containing ammonium polyphosphate (APP), and poly(hexamethylene terephthalamide) (PA6T), was prepared for flame retarding polypropylene (PP). The flame retardation of the PP composites was characterized by limiting oxygen index (LOI). The thermal degradation of the composites was investigated by means of thermogravimetric analysis (TG) and TG coupled with Fourier transform infrared spectroscopy (TG-FTIR). The morphology of the char obtained after combustion of the composites was studied by scanning electron microscopy. It has been found the intumescent flame retardant showed good flame retardancy, with the LOI value of the PA6T/APP/PP (5/25/70) system increasing from 17.5 to 32. Meanwhile, the TG and TG-FTIR work indicated that PA6T could be effective as a carbonization agent and there was a synergistic reaction between PA6T and APP, which effectively promoted the char formation of the PP composites. Moreover, it was revealed that uniform and compact intumescent char layer was formed after combustion of the intumescent flame retarded PP composites.     

Self-extinguishing polypropylene with a mass fraction of 9% intumescent additive II – Influence of highly oriented fibres

Recently, noticeably enhanced flame retardancy of multilayered self-reinforced composites, flame retarded with common ammonium polyphosphate based intumescent system, was described. In this paper the observed novel flame retardant synergism between intumescent additive system and highly oriented polymer fibres is further studied. The ignitability and combustion behaviour of flame retarded multilayer self-reinforced composites were compared to flame retardant compounds, prepared by simple melt compounding, of identical low additive contents, both when the heat was applied parallel (UL-94 tests) and perpendicular (cone calorimetric tests) with the direction of the embedded oriented tapes in self-reinforced composites. SEM and EDS analyses supported the different foaming process of the two types of samples to be understood, while the structure and character of the finally (after combustion) obtained charred layers were examined by compression tests. Considering the results of all the applied testing methods, the complex picture of the mechanism behind the enhanced flame retardant efficiency of flame retarded self-reinforced composites could be clarified.     

Catalytic action of phospho-tungstic acid in the synthesis of melamine salts of pentaerythritol phosphate and their synergistic effects in flame retarded polypropylene

A solid acid, phospho-tungstic acid (PTA), has been used to catalyze the pentaerythritol-melamine phosphate (PER-MP) reaction to synthesize intumescent flame retardant, melamine salt of pentaerythritol phosphate (MPP) used in flame retardant polypropylene (PP). This novel and environmentally friendly synthesis technology well solves the problems of conventional preparation methods. PTA plays a double-role: on one hand, it remarkably enhances the conversion of the above reaction and decreases the reaction temperature; on the other hand, it acts as an effective synergist with MPP and greatly improves the flame retardancy; accordingly, no additional process is needed to remove PTA after the reaction, and the products of the catalyzed reaction were directly incorporated with PP to prepare high-performance flame retardant materials. The catalytic and synergistic effects of PTA, as well as the flame retardancy and mechanical properties of the corresponding flame retardant PP were investigated.     

Synergistic improvement of fire retardancy and mechanical properties of ferrocene‐based polymer in intumescent polypropylene composite

The ferrocene‐based polymer (PDPFDE) accompanied with traditional intumescent flame retardant (IFR) system (ammonium polyphosphate (APP)/pentaerythritol (PER) = 3/1, mass ratio) has been used as additive flame retardant in polypropylene (PP), aiming to lower the total loading amount. The thermal stability and fire retardant properties were investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical combustion (UL‐94), and cone calorimetry (CONE). The fire retardant mechanism was studied by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy. The results showed that the PP1 with 25 wt% IFR only passed the UL‐94 V‐1 rating, but the PP6 loaded by 0.5 wt% PDPFDE and 22.5 wt% IFR possessed an LOI value of 28.5% and passed the UL‐94 V‐0 rating; the peak heat release rate (pHRR) and total heat release (THR) are decreased by 63% and 43%, respectively, compared with pure PP. In addition, the char residue of PP6 manifested a very compact and smooth surface, indicating a more effective barrier layer. Meanwhile, it was interesting that the addition of PDPFDE evidently improved the impact strength and elongation at break of PP/IFR composites.     

Influences of coupling agent on thermal properties, flammability and mechanical properties of polypropylene/thermoplastic polyurethanes composites filled with expanded graphite

In this study, polypropylene (PP)/thermoplastic polyurethanes (TPU) filled with inorganic intumescent flame retardant expanded graphite (EG) was prepared by melt blending in a twin-screw extruder. The thermal stability, fire retardancy, mechanical properties, and fracture morphology of PP/TPU composites with treated and untreated EG were investigated by thermogravimetric analysis, cone calorimeter, and scanning electron microscope. The results showed that both untreated and treated EG can greatly enhance the thermal stability and fire resistance of polymer matrix materials. Compared with untreated EG, treated EG can further improve the flame retardancy of the composites. For example, treated EG can further reduce the heat release rate, total heat release, and CO emissions of the composites in the combustion. Surface treatment of EG could significantly improve elongation at break and impact strength of PP/TPU/EG composites due to its enhanced interfacial adhesion and the good dispersion of EG particles in the polymer matrix.     

Preparation of Intumescent Flame Retardant Polypropylene composite through Solid State Mechanochemical Method

Polypropylene (PP), with characteristics of good mechanical properties, good resistance to water and low cost, has been widely used in many fields such as building, transport, furniture and electrical industries. However, a fateful drawback of polypropylene is its high flammability,restricting its wider applications. Addition of flame retardants is an effective way to improve its flame retardancy. An effective halogen-free flame retardant system used is the mixture of melamine, ammounium phosphate and pentaerythritol (intumescent flame retardant). But how to enhance the dispersion of this mixture in polypropylene matrix is a big problem. A self-made mechanochemical reactor, pan type milling equipment, can exert strong shear and squeeze forces,and has good mixing function. As a result, a uniform dispersion of flame retardants in the polymer matrix can be expectably obtained by using this equipment.In this paper, flame-retarded Polypropylene (PP) composites with intumescent flame retardant (IFR) were prepared via solid state mechanochemical method (pan-mill) and conventional method (twin-roll masticator) respectively. Particle diameter analysis, melt flow index (MFI), differential scanning calorimetry (DSC) and scanning electronic microscopy (SEM) were used to characterize these composites, and the mechanical properties and flame retardancy were also determined. The experimental results showed that the blend of PP and IFR were effectively pulverized from 3～4 mm to less than 300i m under the strong shear forces of pan-mill. With increasing the milling cycles, the MFI value of IFR/PP blend decreased first and then increased. The mechanical properties and flame retardancy of IFR/PP blends prepared by solid state mechanochemical method were proved to be better than those prepared by conventional method because of the dispersing function of pan-mill.Also it was found that IFRs were the nucleating agent for PP and the crystallinity of PP increased first and then decreased with increasing the milling cycles.