Functionalized ordered mesoporous carbon for the adsorption of reactive dyes

A?novel ordered mesoporous carbon containing basic nitrogen functional groups was synthesized by ammonia-tailoring at a temperature of 1173?K and was applied for reactive dye adsorption. The basic nitrogen-containing functional groups incorporated into the carbon surface could enhance the dispersive interactions between the carbon and dye molecules due to the electron-donating effect as well as the electrostatic interactions between the carbon surface and the anions of the dyes. It was found that this novel functionalized ordered mesoporous carbon could increase the adsorption capacity of reactive red 2 at 298?K by around 40?% and 100?% as compared with the unmodified carbon and a commercial activated carbon, respectively. The Freundlich isotherm showed better correlation with the experimental adsorption data of ammonia-tailored samples than the Langmuir isotherm due to the increased surface heterogeneity induced by the nitrogen-containing functional groups. Adsorption of reactive red 2 was an endothermic process as the adsorption capacity increased with increasing temperature. Low desorption efficiency revealed that the adsorption of reactive red 2 on the modified CMK-3 was extremely favorable, tending to be weakly reversible.     

Synthesis of organic-inorganic hybrid mesoporous tin oxophosphate in the presence of anionic surfactant

Synthesis of novel mesoporous hybrid tin oxophosphate is reported from phenylphosphonic acid as the only precursor of phosphorus in the presence of anionic surfactant (SDS), which possesses a wormhole mesoporous structure and is stable even after calcination at 550 degrees C.     

Sodium polyacrylate adsorption onto anionic and cationic silica in the presence of salts

Sodium polyacrylate is well known for its application as a scale inhibitor in common household products, and the effects of both monovalent and divalent metal cations on its structure have been covered by a range of previous publications. In the present article, we extend this work by using solvent relaxation NMR to look at the adsorption of the polyelectrolyte onto both positively and negatively charged silica and how this is altered by calcium chloride. In the anionic case, we found that polyacrylate adsorption was predictably very weak, and interestingly, perhaps counterintuitively, it was further reduced by calcium ions. This is probably linked to NaPA-Ca2+ binding, which changes the conformation and charge of the polyelectrolyte. In contrast, NaPA adsorbs very strongly on cationic silica, to the point that precipitation often occurs, particularly on addition of salt.     

Fluorescence of acridinic dyes in anionic surfactant solution

The interaction of the cationic dyes acridine, 9-aminoacridine (9AA), and proflavine, with sodium dodecyl sulfate (SDS) was studied by electronic absorption, steady-state and time-resolved fluorescence spectroscopies. The dyes interact with SDS in the pre-micellar region leading in two cases to dimerization in dye-surfactant aggregates, but with distinct molecular arrangements. For proflavine, the observed red shift of the electronic absorption band indicates the presence of J-aggregate, which are nonfluorescent. In the case of 9AA, the aggregates were characterized as nonspecific (neither J- nor H-type is spectroscopically observed). The time-resolved emission spectra gives evidences of the presence of weakly bound dimers by the recovery of three defined decay times by global analysis: dye monomer (tau1 = 16.4 ns), dimer (tau2 = 7.1 ns), and a faster component (tau3 = 2.1 ns) ascribed to intracluster energy migration between monomer and dimer. Acridine has a weak interaction with SDS forming only an ion pair without further self-aggregation of the dye.     

Vesicle adsorption on mesoporous silica and titania

Lipid bilayer formation via vesicle fusion on mesoporous silica and mesoporous titania was investigated using quartz crystal microbalance with dissipation monitoring (QCM-D) and fluorescent recovery after photobleaching (FRAP). Results showed that lipid bilayers were formed on mesoporous silica and that intact vesicle adsorption was obtained on mesoporous titania. From the FRAP results, it could be concluded that the lipid bilayer was fluid; however, it had a smaller diffusivity constant compared to bilayers supported on a nonporous silica.     

Adsorption of reactive dyes on titania-silica mesoporous materials

This paper presents a study on the adsorption of two basic dyes, methylene blue (MB) and rhodamine B (RhB), from aqueous solution onto mesoporous silica-titania materials. The effect of dye structure, adsorbent particle size, TiO(2) presence, and temperature on adsorption was investigated. Adsorption data obtained at different solution temperatures (25, 35, and 45 degrees C) revealed an irreversible adsorption that decreased with the increment of T. The presence of TiO(2) augmented the adsorption capacity (q(e)). This would be due to possible degradation of the dye molecule in contact with the TiO(2) particles in the adsorbent interior. The adsorption enthalpy was relatively high, indicating that interaction between the sorbent and the adsorbate molecules was not only physical but chemical. Both Langmuir and Freundlich isotherm equations were applied to the experimental data. The obtained parameters and correlation coefficients showed that the adsorption of the two reactive dyes (MB and RhB) on the adsorbent systems at the three work temperatures was best predicted by the Langmuir isotherm, but not in all cases. The kinetic adsorption data were processed by the application of two simplified kinetic models, first and second order, to investigate the adsorption mechanism. It was found that the adsorption kinetics of methylene blue and rhodamine B onto the mesoporous silica-titania materials surface under different operating conditions was best described by the first-order model.     

Association of chitosan in the presence of an anionic surfactant in aqueous-glycerol solutions

Russian Journal of Applied Chemistry - The effect of additions of sodium tetradecyl sulfate as an anionic surfactant on the association of chitosan macromolecules in aqueous-glycerol solutions was...     

Tuning particle morphology of mesoporous silica nanoparticles for adsorption of dyes from aqueous solution

Spherical and rod mesoporous silica nanoparticles with hexagonal mesostructure were prepared using the modified Stöber method. The morphology, size and internal pore structure can be controlled by simple changing of surfactant concentration and water:ethanol molar ratio. Monodispersed spheroid MCM-41 was obtained at 40 °C under basic conditions using cetyltrimethylammonium bromide (C₁₆TAB) as template. Obtained materials were characterized by X-ray diffraction (XRD), nitrogen physisorption (BET), transmission electron microscopy (TEM) and scanning electronic microscopy (SEM). The results reveal that the pore volume and surface area increase when the amount of C₁₆TAB increases whereas the pore diameter and particle size decrease. However, the use of ethanol as cosolvent led to an increase in the particles’ size. Moreover, the addition of a 3-aminopropyltriethoxysilane greatly influenced the final particle shape. The material was effectively used for the removal of two fluorescent dyes (Hoechst 33342 and rhodamine 6g) from aqueous solution. Adsorption isotherm models, Langmuir, Freundlich and Temkin were used to simulate the equilibrium data. The Langmuir model was found to fit the experimental data better than others models.     

Synthesis of anionic gemini surfactant-templated mesoporous silica nanoparticles and its adsorption application for Pb2+

Abstract

Amino-functionalized mesoporous silica nanoparticles (AFMSN) were prepared based on the self-assembly process of the pre-fabricated template of anionic gemini surfactant. The perfect mass ration of the reactants for the synthesis of the AFMSN with high surface area and amino loading was optimized by orthogonal experiments. Adsorption capability of the optimized product for lead ion (Pb²⁺) was investigated in detail. Specially, the effects of the amino content, solution pH, adsorbent dosage, temperature, and interference of other metal ions on the removal efficiency of Pb²⁺ were studied. It is found that these factors can greatly affect the removal efficiency of Pb²⁺ and the prepared adsorbent exhibits the high adsorption selectivity for Pb²⁺. At an optimal condition, the AFMSN adsorbent presents an excellent adsorption capacity for Pb²⁺ up to 211.42?mg/g. The adsorption kinetics study revealed that the pseudo-second-order model could well describe the Pb²⁺ adsorption process, and the adsorption isotherm was fitted well with the Langmuir model. More importantly, the AFMSN adsorbent could be recycled 8 times and a high adsorption efficiency of Pb²⁺ could still be maintained. Therefore, the prepared AFMSN adsorbent may find practical application in removing Pb²⁺ from the polluted water.     

Flocculation of anionic surfactant micelles in the presence of hydrocarbons

Adsorptive micellar flocculation (AMF) is a surfactant-based separation process based on the flocculation of micelles of suitable anionic surfactants by Al³⁺. The micelles form large amorphous flocs which can be removed by filtration, which is attractive because soluble pollutants are captured by the floc, thus providing a simple separation method. As the primary aim of AMF is the removal of anionic pollutants from aqueous streams, it is important to investigate the influence of the various substances which may affect it. This article discusses the influence of the presence of insoluble hydrocarbons on the flocculation of micelles of the anionic surfactant dodecyl sulfate by Al³⁺. The ratio between surfactant remaining in solution and total surfactant and the ratio between Al³⁺ and surfactant in the flocculate are determined in systems composed of an aqueous solution containing a constant dodecyl sulfate concentration of 0.05 M and a variable Al³⁺ concentration and an organic phase (decane) with phase volume ratios of decane/water ranging from 0 (no decane) to 0.15. The flocculation is only slightly affected by the presence of decane for decane/solution ratios below 0.05, while the effect (lower flocculated fraction) is more marked above this ratio. Received: 25 October 1999/Accepted: 7 February 2000     

The adsorption of dyes used in the textile industry on mesoporous materials

An adsorbent material made with a silica lamellar mesoporous material treated with chitosan has been proved to be useful to adsorb both anionic and cationic dyes used in the textile industry. The two tested dyes Tectilon Blue (anionic) and Rhodamine B (cationic) have different adsorption kinetics reflecting a complex mechanism of the phenomenon. Furthermore, the adsorption capacity and interaction strength of Tectilon Blue is higher than those of Rhodamine B. Tectilon Blue molecules are situated with the molecular plane perpendicular to the adsorbent surface, whilst that of the Rhodamine B molecule is flat and parallel to the surface. The differences may be attributed to the different regions of the adsorbent surface on which the dyes are adsorbed because of their different electric charge.     

Nitrogen adsorption on silica surfaces of nonporous and mesoporous materials

We present an accurate comparative analysis of N 2 adsorption at 77 K on nonporous silica and the pore wall surface of MCM-41 materials. The analysis shows that in the low-pressure region of N 2 adsorption obeys a peculiar mechanism governed by short-ranged forces, which makes the surface curvature effect on the N 2 adsorption in mesopores nearly negligible. We used this observation to define more exactly compared to the BET technique the specific surface area of the reference adsorption isotherm on nonporous silica basing on XRD data and linear sections of t-plots. Calculation of the capillary evaporation and condensation pressures seems to confirm our previous finding that the capillary condensation pressure corresponds to the equilibrium transition rather than spinodal condensation at least for pore sizes less than 7 nm. It allowed us to provide more reliable pore size distribution (PSD) analysis of mesoporous silica materials. For example, the PSDs of MCM-41 samples do not show artificial peaks in the micropore range that we obtained in our earlier publications.     

Analysis of fouling potential in the electrodialysis process in the presence of an anionic surfactant foulant

Fouling of ion exchange membranes in an electrodialysis process is highly sensitive to the concentration of a surfactant. To investigate the influence of the fouling on the process performance, an anion exchange membrane was characterized by electrochemical properties as well as physical and chemical properties. The fouling potential was then quantitatively analyzed using the membrane fouling index as a function of the surfactant concentration. It was observed that the fouling mechanism is initiated by the micelle formation. That is, most of SDBS molecules form a fouling layer on the membrane surface at a higher concentration than the critical micelle concentration. Also the SDBS fouling mechanisms caused by the fouling layer were examined by the electrochemical impedance spectroscopy. The equivalent circuits show that the fouling potential of the system was increased by an additional layer, simultaneously increasing the electrical resistance to permeation of ions through the membrane. However, the SDBS fouling on the membrane was a reversible process.     

Competitive adsorption of nonionic surfactant and nonionic polymer on silica

Competitive adsorption of the nonionic polymer poly(ethylene oxide) (PEO) and the nonionic surfactant of the type poly(ethylene oxide) alkyl ether from aqueous solutions on a silica surface is examined. From one-component solutions, both species readily adsorb onto silica and, in the bulk of mixed (two-component) solutions, polymer-surfactant complexes are not observed. Because both species bind by the same mechanism to silica, subtle differences in layer structure, or other species-specific parameters, determine whether one or both of the species will adsorb. It was found that various surfactants can displace PEO up to a certain critical molecular weight. Surfactants with a high aggregation number, in bulk and on the surface, can displace PEO with a higher molar mass than surfactants with a low aggregation number. As the molar mass of the polymer increases, the time a surfactant needs to completely displace the polymer increases. We can explain both the existence of the critical molar mass and the decrease in adsorption kinetics with a shift in the critical surface association concentration (CSAC).     

Investigation on specific adsorption of hydrogen on lithium-doped mesoporous silica

This paper reports the synthesis, structure, and hydrogen adsorption property of Li-doped mesoporous silica (MPS) with a 2D hexagonal structure. The Li-doping is achieved by impregnation of the cylindrical mesopores with an ethanol solution of lithium chloride followed by heat treatment. Detailed characterization by solid-state NMR, TG-MS, and FT-IR suggests that, during the heat treatment, lithium chloride reacts with surface ethoxy groups (≡Si-OEt) to form ≡SiOLi groups, while ethyl chloride is released into the gas phase. The hydrogen uptake at 77 K and 1 atm increases from 0.68 wt% for the undoped MPS to 0.81 wt% for Li-doped MPS (Li-MPS). The isosteric heat of adsorption is 4.8 kJ mol⁻¹, which is consistent with the quantum chemistry calculation result (5.12 kJ mol⁻¹). The specific hydrogen adsorption on Li-MPS would be explained by the frontier orbital interaction between HOMO of hydrogen molecules and LUMO of ≡SiOLi. These findings provide an important insight into the development of hydrogen storage materials with specific adsorption sites.     

Aggregation behavior in mixed system of double-chained anionic surfactant with single-chained nonionic surfactant in aqueous solution

The aggregation behavior of mixed systems of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) or sodium bis(4-phenylbutyl) sulfosuccinate (SBPBS) with nonionic surfactant pentaethylene glycol mono-n-dodecyl ether (C12E5) have been studied by means of steady-state fluorescence, electrical conductivity, dynamic light scattering, transmission electron microscopy, electrophoretic light scattering and pyrene solubilization measurements. The critical concentrations for aggregation, micropolarity, mobility, solubilization capacity and morphology of aggregates are characterized. Two critical concentrations for aggregation are observed in the mixed surfactants, which may correspond to the formation of different kinds of aggregates. Moreover, it is more favorable for AOT-C12E5 to form mixed vesicles compared to SBPBS-C12E5 at higher mole fraction of C12E5. In addition, it is revealed that SBPBS-C12E5 mixture has larger solubilization capacity for pyrene than AOT-C12E5 system.     

Multistep adsorption of anionic dyes on silica/chitosan hybrid. 1. Comparative kinetic data from liquid- and solid-phase models

In this work, a hybrid silica/chitosan was synthesized and characterized by nitrogen elemental analysis and thermal analysis (TG, DTG, DTA, and DSC) and BET surface area. The hybrid was used in adsorption studies of two anionic dyes from aqueous solutions. A rise of temperature accelerates mass transfer of dyes into the hybrid. However, the maximum adsorption capacities reach similar values from 25 to 55 degrees C. The kinetic data were first evaluated in relation to the decrease of the time-related residual concentration of the dyes in solution, where the second-order model has presented the best fitting. The solid-phase interaction of dye data presents a rough fitting to the traditional first-order Lagergren kinetic model. However, a modified Avrami kinetic equation was successfully fitted to the kinetic quantities, where from five to seven kinetic regions were found. A pore-diffusion model has also demonstrated that the diffusion is the rate-controlling interaction mechanism. However, the experimental-calculated comparative values are the best way to evaluate a specific aqueous- or solid-phase kinetic model.     

Competitive adsorption of anionic dyes onto DMOA modified MCM-41

Research on Chemical Intermediates - The single and binary adsorption of two anionic dyes Acid Yellow 17 (AY17) and Naphtol Green B (NGB) onto N–N–Dimethyl-n-octylamine (DMOA) modified...     

Structural control of mesoporous silica nanoparticles in a binary surfactant system

The grain size and regularity of the hexagonal array of mesoporous silica nanoparticles were investigated in a binary surfactant system composed of cetyltrimethylammonium chloride and triblock copolymer EO106PO60EO106. Structural control was achieved by varying the parameters for the prior hydrolysis of silicon alkoxide under an acidic condition and the subsequent assembly of silicates and surfactants under a basic condition. The formation of the mesoscale architectures was based on the balance between the ordered assembly of anionic silicates and the cationic surfactant through electrostatic interaction and the inhibition of grain growth with a nonionic amphiphilic agent through hydrogen bonds.