X-ray laser research at the LULI (Palaiseau)

The X-ray laser program at Palaiseau is based on the recombination scheme in lithiumlike ions, which requires a moderate pump power and seems to be promising for the purpose of scaling to shorter wavelengths. In aluminum plasmas, peak gain values of 2-2.5 cm^-1 have been obtained at a wavelength of 105.7 Å corresponding to the 3d -5f transition, 6 ns after the top of a 2 ns laser pulse. The same transition in sulfur is emitted at 65.2 Å and has shown a gain of 1 cm^-1 in a preliminary time-integrated experiment. Simulations using a collisional-radiative model as the postprocessor of a hydrodynamic numerical code predict amplifications for the 3d-4f, 3d-5f, and 4d-5f transitions. A new experiment, in progress at the present time, has been designed to enhance the gain-length product up to 10-15 at 105.7 Å. The recently extended facilities of the LULI make it possible to produce a 6-cm-long plasma column, keeping the flux density at the same level as in the previous experiments     

The short vacuum arc. I. Experimental investigations

High-current vacuum arcs drawn between commercial radial-magnetic field, chromium-copper contacts were studied by high-speed photography. The aim of the investigation was to study phenomena of relevance to high-current interruption, such as arc constriction and arc motion. The arcs were drawn at contact opening speeds typical of commercial devices, are duration being 10 ms or less. The arcs were `short' for much of their lifetime, and strong electrode-discharge coupling could be expected. Such arcs are also of principal interest. Arc behavior was found to be strongly influenced by the gap length d and the arc current I. No diffuse mode was observed at d less the d_min≈4 mm and at instantaneous currents I above I_max±25 kA. The diffuse discharge mode was assumed more readily when d was large. At d below 2 mm, the arcs could not be moved by a magnetic field. Increasing both I and d resulted in an increase of the probability and duration of arc motion and of the arc path length. Arc speed was often irregular, showing that arc motion is also affected by parameters other than the purely electrodynamic ones     

Pressure limits for the vacuum arc deposition technique

Observations of the cathodic copper plasma expansion at low pressures of He, Ar, and SF₆ showed that, for background gas mass densities of ρ_g=1 to 4×10^-4 kg/m ³ and higher, the plasma and gas are separated into two volumes. A shock wave acts as a boundary between the two volumes. The boundary attains a stationary position once its expansion velocity decreases to the velocity of sound in the background gas. This position corresponds to a distance R_c to the cathode that agrees with a snowplow expansion model, giving R_c ^βf=E_r, where f is a function of the arc current and background gas characteristics, E _r is the erosion rate of the cathode, and β varies between 2.1 and 2.5. The interaction model is based on kinetic energy exchanges between two gas-like volumes without other energy losses. A maximum pressure limit for vacuum arc deposition is set for ρ_g /I=2 to 9×10^-6 kg/m³ A     

Validity conditions for complete and partial local thermodynamicequilibrium of nonhydrogenic level systems and their application tocopper vapor arcs in vacuum

Validity conditions for complete and partial local thermodynamic equilibrium (CLTE and PLTE) of homogeneous, time-dependent, and optically thin plasmas are derived. For Cu I, electron densities of n_e⩾(5×10²²-5×10²³ ) m^-3 are required for the establishment of CLTE. For Cu I and Cu II, n_e⩾(5×10²¹-5×10²¹ -5×10²²) m^-3 is necessary for PLTE (for electron temperatures of 1-2 eV). Application to low-current copper vapor arcs in vacuum shows that CLTE can be expected for r<200-600 μm (r=distance from the cathode spot). A further limitation follows for temperatures of 2 eV or higher if diffusion effects are taken into consideration. Consequently, the use of the LTE formulas in plasma spectroscopy of low-current vacuum arcs is very limited     

Equilibrium lengths of railgun plasma armatures

Recent data have shown that the length of railgun plasma armatures increases with bore size. The mechanisms for plasma growth and mass loss are treated analytically through a simple thermodynamic model in which mass is added through ablation of bore materials and lost through friction. It is assumed that at the bore wall, a thin boundary layer is formed in the plasma in which the velocity is sufficiently slow that the boundary layer is left behind the bulk of the plasma. Using the scaling relations of J.D. Powell and J. Batteh (1983), a functional relationship between the plasma length l_p and bore height h of the form l_p=kh^α, where α≃0.68. Using the model developed in the present work, a linear relationship between l_p and h is derived, but the proportionality factor depends on temperature, plasma conductivity, velocity, and boundary-layer thickness. Predictions of the model are interpreted in the light of available data. The model is shown to predict lengths which are in reasonable agreement with the observed data     

Stimulated acceleration and confinement of deuterons in focuseddischarges. II

For pt.I see ibid., vol.16, no.3, p.368-73, June 1988. Methods of increasing, by a factor greater than five, the neutron yield/short Y _n from D-D fusion reactions in a plasma focus (PF) enhance both the D⁺-ion acceleration to energy values E _d>1-8 MeV and the ion confinement in the pinch region. Nuclear activation of C and N in the (doped) filling gas of the discharge chamber and of solid targets of C and BN bombarded by the ion beam in the direction of the electrode axis (0°) confirms earlier determination of the energy spectrum of the trapped ions (dφ_t/dE∝φ_0tE ^-m) and of the ejected beam (dφ_b/dE∝φ_0bE _d^-m, m=2.5±0.5 for 0.1 MeV≲E≲3 MeV). A Thomson (parabola) spectrometer with nanosecond time resolution determines the time of emission t( E) of the beam at 0°. Ion acceleration and trapping occur within the small (filamentary) elements of the magnetic fine structure of the pinch, which can be dispersed on a relatively large confinement volume after the pinch disintegration. It has been found that φ_t/φ_b≳10-10³ for E_d≳1 MeV, depending on Y_n     

A hydrodynamic model of vacuum arc plasmas

The properties of plasmas expanding from cathode spots of vacuum arcs are calculated with a one-dimensional two-fluid model. The system of simplified hydrodynamic equations can be solved under stationary conditions using asymptotic power series. Although necessarily only an approximation, such analytical solutions prove to be advantageous compared with numerical integrations. All the plasma parameters are functions of (I/r)^2/5 (current, I: distance, r). The three forces accelerating the ions to high kinetic energies are quantitatively calculable: the electric field, the ion pressure gradient, and the electron-ion friction. The potential is decreasing towards the anode, and the residence of the plasma is negative. The ion temperature reaches only about 35% of the electron temperature. Although only asymptotic, the solution is suited to describe the arc plasma in a sufficient manner all over the expansion region     

A model of the cathode spot glow discharge for a cathode withinclusions of low work function material

A model that describes the self-maintained glow discharge for a composite cathode in which cathode spots are formed on low work function material inclusions is presented. Based on this model, expressions are obtained for the radius of the spot, the cathode voltage, and the spot current as functions of Pd (where P is the gas pressure and d is the thickness of the cathode layer), the parameters of the inclusions, and the basic material matrix are obtained. Numerical results for the case of a glow discharge in 75 torr neon gas with a copper cathode matrix and inclusions of LaB₆ are presented. The average radii of inclusions were 0.05 and 0.015 mm. Conditions under which the glow discharge migrates from the inclusions and begins to spread onto the surface of the basic matrix are obtained. The transition of the glow discharge into a contracted state, depending on the structure of the composite material, is also considered     

Coherent and incoherent XUV emission in helium and neon,laser-driven plasmas

The authors present results of measurements of high-order harmonic generation and XUV spontaneous emission in helium and neon plasmas excited by a short pulse laser at intensities between 10¹⁴ and 5×10¹⁷ W/cm². They compare the observed behavior of the harmonics with recent single atom calculations in helium. A wavelength dependence to the efficiency of harmonic generation that has not been previously reported is observed. Line emission from excited state transitions in Ne⁷⁺ in a short pulse laser-driven plasma is also observed. In particular, strong emission and a rapid recombination rate for the 9.8-nm (3d-2p) transition that is a possible candidate for a recombination-pumped X-ray laser is shown     

A revised theoretical model of vacuum arc spot plasmas

The quasi-stationary hemispherical expansion of the cathodic plasma in vacuum arcs can be modeled with hydrodynamic two-fluid equations. In any case, the state of the plasma is determined by the only variable (I/r)^2/5 (with current I , distance r). In order to avoid some deficiencies of the model (as published) and to investigate more carefully the dependence of the plasma parameters on the arc current, the known analytic solution to the problem is improved by taking into consideration the variability of the Coulomb logarithm and the dependence of the boundary conditions on I. These effects are treated separately. Examples are used to illustrate the new results, with particular emphasis on ion acceleration. The influence of the above factors turns out to be rather unimportant. Quantitatively, they cause some shifts, but no qualitative change of the basic behavior of the plasma is seen     

Computation of the electric and magnetic fields induced in a plasmacreated by ionization lasting a finite interval of time

S.C. Wilks et al. (1988) showed that when an infinite expanse of gas, carrying a linearly polarized electromagnetic wave, is instantly ionized, the initial wave is frequency upshifted. This phenomenon of frequency upconversion through flash ionization gives rise to steady-state transmitted and reflected electromagnetic waves and to a time-independent magnetic field. The case in which the final state of ionization is achieved not instantly but in a finite turn-on time, 0⩽t⩽t 0, which is followed by the steady state, is studied. It is shown that the electric field is obtained from the one-dimensional Helmholtz equation, d²F(t)/dt² +ω₀²g(t)F( t)=0, if electrons are born at rest when they are created during ionization. As a result, the instantaneous frequency of the upshifted radiation is ω(t)=√g(t). The electric field can be solved exactly for specific choices of g(t). It is solved using WKB approximations for arbitrary g(t). The magnetic field is then found by integrating Faraday's law. It is found that the steady-state electric field amplitude depends on the steady-state value o f g(t) but does not depend on the ionization time t₀. Conversely, the static magnetic field amplitude decreases with increasing turn-on time     

Some interruption criteria for short high-frequency vacuum arcs

If the contacts of a vacuum interrupter open shortly before a current zero, the transient recovery voltage (TRV) can cause a reignition and reestablish the arc. When the current in a diffuse vacuum arc passes through zero, there is a distinct pause before the TRV builds up (approximately 40 ns for copper). During this pause the gap carries conduction current only with an ion component which depends on dI /dt, varying between 3 A for dI/dt=60 A/μs and 60 A for dI/dt=1235 A/μs. The ion current subsequently decays in tens or hundreds of nanoseconds. It can be distinguished from the displacement current at this time by varying dV/dt, keeping the other parameters constant. Among the interruption criteria for short high-frequency vacuum arcs, dI /dt prior to current zero and initial dV/dt are the most important. High values of dI/dt are more likely to precipitate reignitions, but breakdowns can occur after lower dI/dt's if the gap has been subjected to a high current for a relatively long time (>100 μs)     

Measurements of the behaviour of neutral atom density in a diffusevacuum arc by laser-induced fluorescence (LIF)

The method of laser-induced fluorescence was used to study the behavior of the absolute neutral vapor density of a diffuse vacuum arc on FeCu contacts. The local and temporal resolutions were 1 mm³ and 10 μs, respectively. The arc current had a sinusoidal shape of 5.8-ms duration with peak values of 90 and 510 A. It was found that the maximum densities of the iron and copper atoms are 1.2×10 ¹⁷ m^-3 and 7.5×10¹⁷ m^-3, respectively. During the arc the density was correlated with the current. At current zero the measured densities decreased to 10 ¹⁶ m^-3. After current zero, an exponential density decay with a time constant of about 100 μs was observed, indicating the recovery of dielectric strength after current zero. Measurements of the neutron iron vapor density at different spatial positions in the electrode gap reveal a nonisotropic distribution. From the measurements of the population distribution of the iron ground-state multiplet a ⁵D, the excitation temperature was derived. This temperature was low compared with the cathode spot temperature 2500-4000 K and decreased from 1600 K at the current maximum to 1000 K at current zero. The results indicate that the generation of neutrals is caused by flying evaporating metal droplets rather than by molten surface areas     

Theory of the cathode sheath in a vacuum arc

A previous theory of the plasma sheath transition starting from the charge exchange model for ion collisions is extended to account for ionization and recombination. It is applied to the quasi-neutral boundary layer (presheath) in front of the cathode sheath of a vacuum arc. An essential potential and density difference between the sheath edge and cathodic plasma ball is found. This difference is accounted for in a unified theory of the arc cathode based on G. Ecker's (1971) existence diagram method, which indicates possible areas of arc operation in the T_cj plane, where T_c is the spot temperature and j is the current density. A numerical evaluation for Cu gives the results which are qualitatively similar to Ecker's theory. The existence areas are quantitatively enlarged and shifted to lower current densities     

Recombination lasing in heliumlike silicon: a possible path to thewater window

A major goal of current X-ray laser research is the achievement of gain in the 23.3-43.7 Å wavelength region, known as the `water window'. Silicon is the lowest atomic number element for which all the heliumlike 3-2 transitions lie in this region. The authors examine the fundamental kinetics of recombination lasing in this species, and conclude that the Si XIII 1s3d¹D ₂-1s2p¹P₁ line at 39.1 Å is an attractive candidate for recombination-pumped lasing. Attainment of gain in this line is somewhat more energetically favorable than for the hydrogenic Al XIII 3-2 transitions, but radiative trapping may be somewhat more troublesome than for H-like Al     

Research into pulsed power-driven recombination lasers

Time-resolved measurements of XUV emissions from recombining Ne and Al plasmas are reported. The DNA/PITHON pulsed-power generator was used to produce hot, dense aluminum and neon plasmas in a Z-pinch configuration. The Al Xl, 4f-3d and 4 d-3p lines at 154.4 and 150.4 Å were observed to be anomalously bright compared to the Al Xl, 4d-2p line. This anomaly, which might be suggestive of recombination lasing, may also be explained by opacity, whereby the optically thick 4→2 lines are reduced in apparent intensity with respect to the 4→3 lines. The Ne X 4-3 line was observed to be spatially localized on axis where emissions from the Ne X 3-2 line were sharply reduced in intensity. On axis, the anomalous brightness of the Ne X 4-3 line suggests a strong inversion     

Soft X-ray recombination laser research at the Institute of LaserEngineering

Soft X-ray laser experiments recently carried out using the Gekko MII glass laser facility at the Institute of Laser Engineering, Osaka University, are described. Hydrogenic and lithiumlike lasing schemes in recombining plasmas were investigated using foil targets exploded with line-focused 532 nm laser radiation of approximately 100 J energy. In a preliminary study, time-integrated emissions of Balmer-α transitions in C⁸⁺ and O⁷⁺ and 5-3 transitions in Al¹⁰⁺ were found to increase nonlinearly with increasing target length, yielding gain coefficients of G=0.9 to 2.3 cm ^-1. In a subsequent, more refined study, which included time-resolved measurements, the authors obtained a gain of G=2 cm^-1 and a gain-length product GL=3 for the Balmer-α transition in F⁸⁺ at 80.9 Å     

Acoustic double layers in multispecies plasma

Particle simulation in a one-dimensional bounded system is used to examine the formation of acoustic double layers in the presence of two ion species. Double-layer formation depends critically on the details of the distribution functions of the supporting ion populations, and their relative drifts with respect to the electrons. The effect of having two ion components, an H⁺ and an O⁺ beam, on double-layer evolution from ion acoustic turbulence driven by an electron drift relative to the H⁺ beam of ≈0.5u _e, where uu_e is the electron thermal speed, is examined. The ratio of ion drifts is taken to be consistent with acceleration by a quasi-static auroral potential drop (i.e. V _H/V_O=√M_O/ M_H=4.0). Acoustic double layers form in either ion species on the time scale τ≈100ω_ps^-1, where ω_ps is the ion plasma frequency for species `s' and s=H or O, and for drifts relative to the electrons lower than that required for double layer formation in simulations of single ion component plasma     

Monte Carlo simulation of electron swarms in nitrogen in uniformE×B fields

The motion of electrons in nitrogen in uniform E× B fields is simulated using the Monte Carlo technique for 240⩽E/N⩽600 Td (1 Td=1×10^-17 V cm²) and 0⩽B/N⩽0.45×10^-17 T cm³ . The electron-molecule collision cross sections adopted are the same cross sections as those used previously for the numerical solution of the Boltzmann equation. The swarm parameters obtained from the Monte Carlo simulation are compared with the Boltzmann solution and with the experimental data available in the literature. In relation to E×B fields, it is concluded that the Monte Carlo approach provides an independent method of substantiating the validity of the equivalent electric-field approach     

Analytic expression for the electric potential in the plasma sheath

An expression for the spatial dependence of the electric potential in a collisionless and source-free planar plasma sheath is presented. This expression is derived by analogy with Child's law and approaches Child's law asymptotically as the potential drop φ_W across the sheath becomes large, |eφ_W/kT_e|>10⁴. Here k is Boltzmann's constant, T_e is the electron temperature, and e is the electronic charge. Comparison with numerical solutions of the model equations indicates that the sheath thickness and potential variation predicted by this improved Child's law are accurate for |eφ_W/kT_e|>10. In contrast, the authors find that Child's law is accurate only when |e φ_W/kT_e|>10⁴