Properties of block and graft copolymers of polybutadiene with small complexed poly(4-vinylpyridine) segments

Various diblocks, triblocks and a graft copolymer of butadiene with 4-vinylpyridine short blocks have been prepared. They were complexed with ZnCl₂ to give ionomer-like materials. For all copolymers, the T_g of the elastomeric block (?84°C to ?91°C) was unchanged by complexation. For all diblocks and triblocks with short blocks (DP _n ～ 3) the storage modulus was only slightly increased by comparison with uncomplexed materials. For the graft copolymer even with short blocks the material is less sensitive to temperature after complexation. For triblocks, when the DP _n of the vinylpyridine blocks was high enough (15 units), complexes were associated in multiplets of large size and the elastomeric properties were retained up to 200°C.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

Phase Behaviour of Poly(styrene-co-methacrylic acid)/ Poly(styrene-co-N,N-dimethylacrylamide)/Poly(styrene-co-4-vinylpyridine) Ternary Blends by DSC and FTIR

Summary: we have investigated by DSC and FTIR the miscibility and phase behaviour of binary and ternary blends of different ratios of poly(styrene-co-methacrylic acid) containing 15 mol% of methacrylic acid (SMA15) with poly(styrene-co-N,N-dimethylacrylamide) containing 17 mol% of N,N,-dimethylacrylamide (SAD-17) and poly(styrene- co-4-vinylpyridine) containing 15 mol% of 4-vinylpyridine. SMA15 is miscible with both SAD17 and S4VP15 and interacts more strongly with S4VP15 than with SAD17 as evidenced by the positive deviations from linear average line observed with these blends and the appearance of new bands in the 1800–1550 cm⁻¹ region. This behaviour is known as ΔK effect. The FTIR study confirms that though the specific intermolecular interactions that occurred with each pair of the SMA15/S4VP15 and SMA15/SAD17 binary components are of different strength, they still exist in the ternary blend. Even though the three binary polymer pairs are individually miscible, the ternary system of SMA15/S4VP15/SAD17 exhibits only partial miscibility with small loop of immiscibility due to a significant ΔK effect. These results obtained by DSC and FTIR are in a fair agreement with theoretical prediction applying the Painter-Coleman association model.     

Swelling-assisted modification of poly(ethylene terephthalate) by methacrylic acid

When a poly(ethylene terephthalate), PET, film is heated in an aqueous solution of methacrylic acid in the presence of hydrogen peroxide as an initiator, it is found that the weight of the film is increased. The amount of methacrylic acid that may be added onto the film is dependent upon the concentration of the monomer, the initiator, and the temperature at which the reaction occurs. Pretreatment of the film with 1,1,2,2,tetrachloroethane causes swelling and the amount of add-on is increased as the swelling level increases. Methacrylic-acid-modified PET films hydrolyze at room temperature in aqueous sodium hydroxide; the rate of hydrolysis is dependent upon the amount of add-on and the concentration of the base. This procedure leads to a chemically induced blend of polymethacrylic acid and poly(ethylene terephthalate), and grafting of the monomer onto the polymer film does not occur. © 1995 John Wiley & Sons, Inc.     

pH-responsive poly(methacrylic acid)-grafted hollow silica vesicles

Poly(methacrylic acid)-grafted hollow silica vesicles (PMAA-g-hollow silica vesicles) were obtained through a grafting-from approach. PMAA brushes were formed by performing atom-transfer radical polymerisation of sodium methacrylate with an initiator attached to the hollow silica spheres. PMAA-g-hollow silica vesicles were characterised by using TEM, thermogravimetric analysis (TGA) and FTIR spectroscopy. pH-dependent ξ potential and (1)H NMR spectra of PMAA-g-hollow silica vesicles were measured, and the results indicated that MAA brushes in PMAA-g-hollow silica vesicles had a lower ionisation degree and low solubility in acidic aqueous solution, for example, pH 3.4, but a higher ionisation degree and high solubility when the pH was higher than 7. Also it was demonstrated that calcein blue and fluorescein isothiocyanate (FITC) labelled dextran (M(n):10 kDa) could be encapsulated in the interiors of the PMAA-g-hollow silica vesicles with a negligible amount in PMAA brushes at pH 2, and pH-triggered release of calcein blue and FITC-labelled dextran from PMAA-g-hollow silica vesicles was observed at pH 7.4.     

Molecular modeling of polymers. 10. Characterization of conformational transitions of poly(acrylic acid) and poly(methacrylic acid) using dyad structures

The conformational profiles of nearest side-chain neighbors, methylene-dyad structures, of poly(acrylic acid), PAA, and poly(methacrylic acid), PMA, were determined as a function of tacticity, extent of ionization, and presence of counterion. The dominant backbone conformer states are quite similar for both isotactic and syndiotactic diads in a common charge state. Thus, the overall dimensional properties of isotactic syndiotactic and atactic chains of PAA or PMA, based upon dyad interactions, are predicted to be alike for a given charge state. Significant deviations from precise t, g⁺, and g^? states are found for the dyad minimum energy conformations. The rod-to-coil and coil-to-rod transitions observed in PAA and PMA, respectively, as a function of increasing counterion concentration can be explained, to a large extent, by the conformational profiles of the corresponding dyad model structures. © 1994 John Wiley & Sons, Inc.     

Cross-linked poly(4-vinylpyridine/styrene) copolymers as a support for immobilization of ytterbium triflate

Eight cross-linked poly(4-vinylpyridine/styrene) (P/S) resins (as beads) were prepared by radical suspension polymerization. Ytterbium triflate was immobilized in the range of 0.10-0.24 mmol/g by mixing with the P/S resins. The ytterbium triflate-immobilized P/S resins exhibited good activity in two Lewis acid-catalyzed reactions. Low pyridine containing resins were recycled with no loss of activity, while a slight loss of activity was observed with the higher pyridine containing resins.     

Gas permeability,diffusivity, and solubility of poly(4-vinylpyridine) film

Although poly(4-vinylpyridine) is believed to have good gas permselectivity, the intrinsic gas permeation property is rarely reported in the literature. The objective of this work is to study the the intrinsic gas permeation property of poly(4-vinylpyridine) using a free-standing film. Because of its brittleness and strong adhesion with most solid surfaces, a free-standing poly(4-vinylpyridine) film was therefore prepared from casting on a liquid mercury surface. The permeation behavior of He, H₂, O₂, N₂, CH₄, and CO₂ through the film was tested over a pressure range of 252 to 800 cm Hg at 35°C. The permeability and solubility decrease slightly with an increase in pressure, whereas the diffusivity increases as pressure increases. The pressure-dependent phenomenon can be explained using the partial immobilization model and the dual sorption model. An effective gas molecule diameter, which is defined as the square root of the product of gas collision and kinetic diameters, was used to correlate the diffusivity and gas molecule size, and an empirical equation was derived. Solubility is also a strong function of gas physical properties such as critical temperature and Lennard–Jones force constant, which are the measures of gas condensability and molecule interaction, respectively. In general, higher solubility in a polymer is obtained for gases with greater condensability and stronger interaction. Typical gas permeabilities of poly(4-vinylpyridine) measured at 619 cm Hg and 35°C are: 12.36 (He), 12.64 (H₂), 3.31 (CO₂), 0.84 (O₂), 0.14 (CH₄), and 0.13 (N₂) barrers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2851–2861, 1999     

Molecular weight influence on viscosimetric parameters of poly(4-vinylpyridine) polymers

This work describes the effect of the molecular weight on the viscosimetric parameters of poly(4-vinylpyridine) (P4VP) polymers in ethanolic solution. Numerous studies concerning this question have been reported in very separate intervals of molecular weight. We have observed a discordance (discontinuity) in the variation of the intrinsic viscosity as a function of the molecular weight of these polymers ([η]=f(M_w)). In order to establish a general relationship between viscosimetric parameters and M_w, we have considered 10 P4VP samples in a wide interval of molecular weights: 0.75×10⁴ to 153×10⁴. These results have been compared and completed with that of the literature. We have observed that:

(i)

All viscosimetric parameters (intrinsic viscosity [η], Huggins constant k_H, second virial coefficient, viscosimetric expansion coefficient α_η, and critical concentration) change according to a continuous function without a break.

(ii)

The lower is the molecular weight of P4VP; the higher are the variations of the expansion coefficient and the interaction effects.

(iii)

The variation of the intrinsic viscosity versus the molecular weight follows a unique relation in the whole M_w range. In fact, the Berkowitz equation (1), described for a limited range of relatively high M_w (10⁵ to 18.5×10⁵) is extended for all M_w interval values.

(iv)

Empiric laws for [η], k_H, A₂ and C^* and variations as a function of molecular weight were proposed for the P4VP in ethanol.

     

Binding of a surfactant counterion to low-charge-density poly(acrylic acid) and poly(methacrylic acid)

The binding of a cationic surfactant, dodecylpyridinium (C12Py) chloride, with a low-charge-density poly (methacrylic acid) (PMA) was investigated in buffer solutions under the condition of constant pH. The binding isotherms with PMA consisted of two and three steps at a pH lower and higher than 3.2, respectively. Bindings in the first step were independent of pH and this step was considered to correspond to the solubilization of the hydrocarbon chains of C12Py into the nonpolar region of the compact form of PMA. This is the indication of the compact form from the binding isotherm. At pH higher than 3.2, the second step was discriminated and it depended on the pH. In the third step, a sharp rise in the degree of binding (β) was observed accompanying the solubilization of the precipitates of the PMA–C12Py complex. The binding with poly(acrylic acid) (PAA) and PMA in conventional unbuffered NaCl solutions was also examined and the pH profile of the solution during the binding process was determined. In the case of unbuffered NaCl solutions, the binding with PAA took place cooperatively at the critical association concentration (cac). The binding isotherm consisted of two steps and the pH decreased with the increase in β. The binding isotherm of PMA, on the other hand, consisted of three steps: the pH decreased slightly in the first step and considerably in the second step with the increase in β but it increased with β in the third step, exhibiting a pH minimum around 3.2. The binding in the first step coincided with that obtained in the buffered solutions. Linear relationships between β and the pH were found for both polymers. In the case of PMA, no cac was observed in both buffered and unbuffered NaCl solutions. Received: 24 January 2001 Accepted: 23 May 2001     

Single-ion and salt conductor polymer electrolytes based on poly(4-vinylpyridine) quaternized with poly(ethylene oxide) side chains

A new type of single-ion conductor with fixed cation was synthesized by spontaneous anionic polymerization of 4-vinylpyridine in the presence of short polyethylene oxide ( PEO ) chains as alkylating agents. These comblike polymers have low T_gs and are amorphous with the shorter PEO s. Their conductivities are unaffected by the nature of the anion ( Br ⁻, ClO ₄⁻, and tosylate) and are controlled by the free volume and the mobility of the pendant cation. By comparison of the results at constant free volume, it is shown that the charge density decreases with the increasing length of pendant PEO demonstrating that PEO acts only as a plasticizing agent. Best conductivity results (σ = 10⁻⁵ S cm⁻¹ at 60°C) are obtained with PEO side chains of molecular weight 350. With this sample, the conductivity in the presence of various amounts of added salt (LiTFSI) was studied. A best value of 10⁻⁴ S cm⁻¹ at 60°C is obtained with a molar ratio EO/Li of 10. It is shown that, over the range of examined concentrations (0.2–1.3 mol Li kg⁻¹), the reduced conductivity σ_r/c increases linearly with increasing salt concentration showing that the ion mobility increases continuously. Such behavior is quite unusual since in this concentration range a maximum is generally observed with PEO systems. To interpret this result and by analogy with the behavior of this type of polymer in solution, it is proposed that the conformation of these polymers in the solid state is segregated with the P4VP skeleton more or less confined inside the dense coils surrounded by the PEO side chains. Under the influence of the increasing salt concentration, this microphase separation vanishes progressively: The LiTFSI salt exchanges with the tosylate anions and acts as a miscibility improver agent. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2719–2728, 1997     

聚甲基丙烯酸与修饰聚丙烯酰胺间的络合作用

利用荧光各向异性,荧光探针和荧光猝灭等静态光物理技术研究了稀水溶液中聚甲基丙烯酸（ＰＭＡＡ）与阳离子修饰聚丙烯酰胺（ＱＣＰＡＭ）间的络合作用。结果表明：在ｐＨ＝２－８范围内,ＰＭＡＡ与ＱＣＰＡＭ之间发生明显络合,但以ｐＨ为４时络合作用最大,最佳络合本比为１：１（单体单元比）,络合作用的发生大大地改变了ＰＭＡＡ的构象行为,ＰＭＡＡ构象对ｐＨ和络合作用的双重依赖性有可能在新型“智能”凝胶的设计合成上获     

Charge-mosaic membrane from gamma-irradiated poly(styrene-butadiene-4-vinylpyridine) triblock copolymer

Poly(styrene-butadiene-4-vinylpyridine) triblock copolymers were prepared from styrene (S), butadiene (B), and 4-vinylpyridine (P) by sequential anionic polymerization with n-butyllithium as initiator and benzene as solvent. The triblock copolymer was characterizated by gel-permeation chromatography (GPC), transmission electron microscopy (TEM), and viscoelastic spectrometry. Films of the triblock copolymer cast from solution in mixtures of chloroform and n-butyraldehyde were subjected to gamma-ray irradiation to form cross-linked networks, Cationic and anionic groups were introduced by sulfonation and quater-nization to obtain charge-mosaic membranes. The resulting membrane had substantial cation-exchange and anion-exchange capacities. The membranes were very permeable to electrolyte (J_KCI = 2.10×10^?8 mol/cm² s). © 1993 John Wiley & Sons, Inc.     

Complexation of poly(acrylic acid) and poly(ethylene oxide) investigated by enhanced Rayleigh scattering method

The method of enhanced Rayleigh scattering spectroscopy (ERS) was developed to investigate the complexation of poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) in semidilute polymer solutions. Based on the Ornstein‐Zernike equation, the relationship between macromolecular static correlation length and ERS intensity was presented. Moreover, the ERS spectra were calculated by the moving window two‐dimensional (MW2D) correlation spectroscopy to get detailed information of the polymer complexation. The results indicated that the ERS spectroscopy characteristics of the polymer mixtures have similar trend, and the ERS intensity promptly increases as the macromolecular chains contract. The increase of ERS intensity showed that the degree of complexation between PAA and PEO increases when the pH value decreases. The complexation results from the collapse of macromolecular chains, which is induced by the PAA chains contracting and the enhanced association between PAA and PEO chains because of the hydrogen bond formation. In addition, the association resulting from the complexation of PAA and PEO in solution was demonstrated by the MW2D correlation spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1847–1852, 2010     

Association of copolymers of methacrylic acid and 4-vinylpyridine in comparison with an intermacromolecular complex of poly(methacrylic acid) with poly(4-vinylpyridine)

Solution properties of copolymers [C(MA-Py)x] of methacrylic acid and 4-vinylpyridine and intermacromolecular complexes of poly(methacrylic acid) (PMAA) and poly(4-vinylpyridine) (PVP) in the presence or absence of a proton-accepting water-soluble polymer such as poly(ethylene glycol) (PEG) in water/methanol mixed solvent are studied by potentiometric titration, turbidity and viscosity methods. These copolymers behave like polyampholytes and their solubilities are strongly dependent with pH changes. The pH regions where they are precipitated around their isoelectric points are narrower than those of the intermacromolecular complex of PMAA with PVP. The polyampholyte can form an intermacromolecular complex with PEG in acidic solution but this complex is soluble in the medium.     

PMAA纳米水凝胶的水相制备

利用表面活性剂间的疏水作用以及表面活性剂与单体间的氢键作用,促使甲基丙烯酸(MAA)单体在原位生成的聚甲基丙烯酸甲酯(PMMA)种子乳胶表面的选择性聚合,实现了PMAA纳米水凝胶的水相"绿色"制备。利用动态光散射、傅里叶红外光谱、透射电子显微镜表征了PMAA纳米水凝胶的尺寸、组成、形貌和pH响应性。研究了聚氧乙烯失水山梨醇单月桂酸酯(吐温20)的用量、N,N’-亚甲基双丙烯酰胺(MBA)的用量、MAA的用量和加入方式、十二烷基硫酸钠(SDS)的补加速率等对PMAA纳米水凝胶的尺寸和溶胀性能的影响。结果表明:PMAA纳米水凝胶为核-壳结构;随着MBA用量的减小、吐温20用量的增加、MAA用量的增加,PMAA纳米水凝胶的尺寸和溶胀比均增大;当采用半连续加入MAA时,PMAA纳米水凝胶的尺寸和溶胀比变小;当SDS的补加时间由60min延长到100min时,PMAA纳米水凝胶的尺寸逐渐变小。PMAA纳米水凝胶具有良好的pH响应性,当介质的pH从1增加到6时,其流体力学体积扩张了64倍。     

Synthesis and characterization of poly(4-vinylpyridine) substituted with a novel betaine salt derived from 4,5-dicyanoimidazole

A novel betaine internal salt ( 3 ) has been synthesized by the reaction of pyridine with 1-methyl-2-bromo-4,5-dicyanoimidazole ( 1 ). The reaction of pyridine with 1 serves as a model for the reaction of poly(4-vinylpyridine) with 1 . The reaction of poly(4-vinylpyridine) with 1 gives betaine salt substituted polymers which were characterized by IR, NMR, UV-visible spectroscopy, and viscometry. The substituted polymers were compared to the model compound ( 3 ) and to unsubstituted poly(4-vinylpyridine) in order to determine polymer structure and the degree of substitution. One of the substituted polymers shows polyelectrolyte behavior. Thermal characterization of the substituted polymers shows two exothermic transitions at 260 and 340°C attributed to chemical reactions of the pendant groups.     

Miscibility and Thermal Behaviour of Poly(styrene-co-itaconic acid)/Poly(butyl methacrylate-co-4-vinylpyridine) Mixtures. Accessibility and Self-Association Effects

Summary: The miscibility and thermal behaviour of binary mixtures of poly(styrene-co-itaconic acid) containing 11 or 27 mol % of itaconic acid (PSIA-11 or PSIA27) with poly(butyl methacrylate) (PBMA)or poly(butyl methacrylate-co-4-vinylpyridine) containing 10 or 26 mol% of 4-vinylpyridine (PBM4VP-10, PBM4V-P26) were investigated by differential scanning calorimetry, scanning electron microscopy, FTIR spectroscopy and thermogravimetry. The results showed that 11 mol % of itaconic acid and 10 mol % of 4-vinylpyridine respectively introduced within the polystyrene and poly(butyl methacrylate) matrices induced the miscibility of this pair of polymers due to specific interactions of hydrogen bonding type with partial pyridine protonation that occurred between the two copolymers as evidenced by FTIR from the appearance of two new bands at 1607 cm⁻¹ and 1640 cm⁻¹. Increasing itaconic acid content from 11 to 27 mol % led to a decrease of the intensity of the specific interactions within PSIA-27/PBM4VP blends and is attributed to both accessibility and self association effects as evidenced by DSC from the change of the shape of the Tg- composition curves and by FTIR spectroscopy. As shown from the thermogravimetric study, the presence of these specific interactions delayed the anhydride formation and improved the thermal stability of the blends.