Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Ionic conductivity of complexes of novel multiarmed polymers with phosphazene core and LiClO4

Novel multiarmed polymers with ethylene oxide units, [( CH₂CH₂O)_n : 7, n = 3; 8, n= 7.2; 9, n = 11.8, and 12, n = 11.8] were prepared from the reaction of polyethylene glycol monomethyl ethers with acid chlorides of hexakis(3,5-dicarboxyphenoxy)-( 6 ) and hexakis(4-carboxyphenoxy)cyclotriphosphazenes ( 11 ) and conductivities of their Li⁺ salt complexes were investigated. The glass transition temperatures of the salt-free polymers are in the temperature range −59 to −54°C, indicative of a high degree of reorientational mobility of the arms. When LiClO₄ was added to the multiarmed polymers, the T_g values raised monotonically. The extent of T_g elevation was affected by the length of arms and the number of oxygen atoms around cyclotriphosphazene core and increased in the order 7 > 8 > 12 > 9 . The conductivities increased in the order 9 > 8 = 12 > 7 and the maximum conductivities of 4.0 × 10⁻⁵ S/cm at 30°C and 6.0 × 10⁻⁴ S/cm at 90°C have been achieved for the 9 -Li⁺ complex with Li⁺/O = 0.03. Interestingly, the conductivity of 9 -Li⁺ complexes at constant reduced temperatures increased in the whole concentrations of LiClO₄ examined (Li⁺/O = 0.01–0.2), although the degree of increase in conductivity above Li⁺/O = 0.06 became small. From the behaviors of T_g and the conductivity of multiarmed polymer–LiClO₄ complexes, it appears that the conductivity is governed by relative concentrations of inter- and intramolecular complexes in the polymer matrix. The influence of structural change of the comb-shaped to multiarmed polymers on the conductivity is described. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1839–1847, 1997     

Thermal polymerizations of alkali 4-(2-bromoethyl)benzoates in bulk

Thermal polymerizations of alkali 4-(2-bromoethyl)benzoates (2-BEBAs) were investigated. The polymerization of the lithium salt at 220°C for 2 h under reduced pressure in bulk, followed by esterification, produced poly(methyl 4-vinylbenzoate), having a number-average molecular weight (M̄_n) of 9500 in a 54% yield. Thus, elimination of hydrogen bromide to form a double bond occurred, followed by vinyl polymerization. In contrast, polymerization of the potassium salt at 200°C for 2 h afforded poly(oxycarbonyl-1,4-phenylene-ethylene) (polyester 1), having an inherent viscosity of 0.19 dL g⁻¹ in a 95% yield: i.e., polycondensation proceeded to afford the polyester. Reaction of the sodium salt at 220°C for 2 h produced polyester 1 having M̄_n of 4000 in a 28% yield as well as 4-vinylbenzoic acid in a 9% yield. In the reaction of the sodium salt, both polycondensation and double bond formation occurred. Thus, these polymerizations depended on the counter cations of 2-BEBAs. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2055–2060, 1999     

Single-ion and salt conductor polymer electrolytes based on poly(4-vinylpyridine) quaternized with poly(ethylene oxide) side chains

A new type of single-ion conductor with fixed cation was synthesized by spontaneous anionic polymerization of 4-vinylpyridine in the presence of short polyethylene oxide ( PEO ) chains as alkylating agents. These comblike polymers have low T_gs and are amorphous with the shorter PEO s. Their conductivities are unaffected by the nature of the anion ( Br ⁻, ClO ₄⁻, and tosylate) and are controlled by the free volume and the mobility of the pendant cation. By comparison of the results at constant free volume, it is shown that the charge density decreases with the increasing length of pendant PEO demonstrating that PEO acts only as a plasticizing agent. Best conductivity results (σ = 10⁻⁵ S cm⁻¹ at 60°C) are obtained with PEO side chains of molecular weight 350. With this sample, the conductivity in the presence of various amounts of added salt (LiTFSI) was studied. A best value of 10⁻⁴ S cm⁻¹ at 60°C is obtained with a molar ratio EO/Li of 10. It is shown that, over the range of examined concentrations (0.2–1.3 mol Li kg⁻¹), the reduced conductivity σ_r/c increases linearly with increasing salt concentration showing that the ion mobility increases continuously. Such behavior is quite unusual since in this concentration range a maximum is generally observed with PEO systems. To interpret this result and by analogy with the behavior of this type of polymer in solution, it is proposed that the conformation of these polymers in the solid state is segregated with the P4VP skeleton more or less confined inside the dense coils surrounded by the PEO side chains. Under the influence of the increasing salt concentration, this microphase separation vanishes progressively: The LiTFSI salt exchanges with the tosylate anions and acts as a miscibility improver agent. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2719–2728, 1997     

Synthesis and characterization of cerium,thorium, and uranyl complexes with ( E )-4-(4-methoxyphenoxy)-4- oxobut-2-enoic acid

(E)-4-(4-Methoxyphenoxy)-4-oxobut-2-enoic acid and its Ce(IV), Th(IV), and UO₂(II) complexes were synthesized and characterized by MS, elemental analysis, IR, UV, TG-DTA, and NMR. The complexes have composition [CeL₂(OH)₂ · 2H₂O] · H₂O, [ThL₂(OH)₂ · 2H₂O] · H₂O, and [UO₂L₂ · 2H₂O] · H₂O. Molar conductance data confirm that the three complexes are nonelectrolytes. The IR and NMR results show that the carboxylates coordinate to the metal ions bidentate, and the ester carboxylic groups do not take part in coordination. Luminescence spectra of the ligand and complexes in DMSO at room temperature were also studied showing strong luminescence of the metal ions.     

IONIC CONDUCTIVITY OF POLY(β-ALKOXYCARBONYLETHYLMETHYLSILOXANE)-LiClO4 CROSSLINKED FILMS

Poly (β-carboxyethylmethylsiloxane)-LiClO_4 and poly (β-alkoxylethylmethylsiloxane)-LiClO_4 crosslinked fllms have been prepared. The ionic conductivity of the films depends on the polymer species, concentration of lithium perchlorate, temperature and content of crosslinking agent. The effect of high polar organic solvent 1, 4-butyrolactone on the ionic conductivity and mechanical properties of poly (β-carhoxyethylmethylsiloxane )-LiClO_4 system was also investignied.     

Synthesis and characterization of novel poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate

The melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L‐proline (N‐CBz‐Hpr) with cyclic carbonate [trimethylene carbonate (tri‐MC) or tetramethylene carbonate (tetra‐MC)] at a wide range of molar fractions in the feed produced new degradable poly(ester‐carbonate)s. The influence of reaction conditions such as polymerization time and temperature on the yield and inherent viscosity of the copolymers was investigated. The polymerizations were carried out in bulk at 140 °C with 1.5 wt % stannous octoate as a catalyst for 30 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, gel permeation chromatography, and Ubbelohde viscometry. The copolymers synthesized exhibited moderate molecular weights with rather narrow molecular weight distributions. The values of the glass‐transition temperature (T_g) of the copolymers depend on the molar fractions of cyclic carbonate. For the poly(N‐CBz‐Hpr‐co‐tri‐MC) system, with a decreased tri‐MC content from 93 to 16 mol %, the T_g increased from ?10 to 60 °C. Similarly, for the poly(N‐CBz‐Hpr‐co‐tetra‐MC) system, when the tetra‐MC content decreased from 80 to 8 mol %, the T_g increased from ?18 to 52 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐tri‐MC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐tri‐MC)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1435–1443, 2003     

The preparation and characterization of poly(urethane–peo-polar siloxane) complexes as polymer electrolytes

A series of novel poly(urethane-PEO-polar siloxane) copolymers and their complexes with LiClO₄ were prepared for assessment as polymer electrolytes and characterized by IR, GPC, and DSC, and their ionic conductivity and thermal stability were tested. The incorporation of polar siloxanes into U-PEO greatly increased conductivity. The highest conductivity was 2.6 × 10^?5 S cm^?1 at 25°C. The correlation between T_g, conductivity, and the ratio of siloxane to PEO as well as stability of the polymers are discussed. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of the ionomer diblock copolymer poly(4‐vinylbenzyl triethyl ammonium bromide)‐b‐polyisobutene

A new amphiphilic diblock copolymer containing an ionomer segment, poly[(4‐vinylbenzyl triethyl ammonium bromide)‐co‐(4‐methylstyrene)‐co‐(4‐bromomethylstyrene)]‐b‐polyisobutene [poly(4‐VBTEAB)‐b‐PIB], was synthesized by the chemical modification of poly(4‐methylstyrene)‐b‐polyisobutene [poly(4‐MSt)‐b‐PIB]. First, the 4‐methylstyrene moiety in poly(4‐MSt)‐b‐PIB was brominated with azobisisobutyronitrile as an initiator at 60 °C in CCl₄, and then the highly reactive benzyl bromide groups were ionized by a reaction with triethylamine in a toluene/isopropyl alcohol (80/20 v/v) mixture at about 85 °C to produce the ionomer diblock copolymer poly(4‐VBTEAB)‐b‐PIB. The solubility of the ionomer block copolymer was quite different from that of the corresponding poly[(4‐methylstyrene)‐co‐(4‐bromomethylstyrene)]‐b‐polyisobutene {poly[(4‐MSt)‐co‐(4‐BrMSt)]‐b‐PIB}. Transmission electron microscopy observations demonstrated that all three diblock copolymers had microphase‐separation structures in which polyisobutene (PIB) domains existed in the continuous phase of the poly(4‐methylstyrene) segment or its derivative segment matrix. Dynamic mechanical thermal analysis measurements showed that poly[(4‐MSt)‐co‐(4‐BrMSt)]‐b‐PIB had two glass‐transition temperatures (T_g's), ?56 °C for the PIB segment and 62 °C for the poly[(4‐MSt)‐co‐(4‐BrMSt)] domain, whereas poly(4‐VBTEAB)‐b‐PIB showed one T_g at ?8 °C of the PIB domain; T_g of the poly[(4‐vinylbenzyl triethyl ammonium bromide)‐co‐(4‐methylstyrene)‐co‐(4‐bromomethylstyrene)] domain was not observable because of the strong ionic interactions resulting in a higher T_g and a retention of modulus up to 124 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2755–2764, 2003     

Preparation and properties of aromatic polyamides and polyimides derived from 3,3-bis [4-(4-aminophenoxy) phenyl] phthalide

3,3-Bis[4-(4-aminophenoxy)phenyl]phthalide ( II ) was used as a monomer with various aromatic dicarboxylic acids and dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of phenolphthalein with p-chloronitrobenzene in the presence of K₂CO₃. Polyamides IV _a-g having inherent viscosities of 0.77–2.46 dL/g were prepared by the direct polycondensation of diamine II with diacids III _a-g using triphenyl phosphite and pyridine as condensing agents. The polyamides were readily soluble in a variety of solvents such as N, N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAc), and N-methyl-2-pyrrolidinone (NMP) and afforded transparent and flexible films from the polymer solutions. These polymers had glass transition temperatures (T_gs) in the 227–307°C range and 10% weight loss temperatures occurred up to 450°C. Polyimides VI _a-e based on diamine II and various aromatic dianhydrides V _a-e were synthesized by the two-stage procedure that included ring-opening, followed by thermal or chemical conversion to polyimides. Most of the polyimides obtained by chemical cyclodehydration procedure were found to soluble in DMF, NMP, o-chlorophenol, and m-cresol. The T_gs of these polyimides were in the 260–328°C range and showed almost no weight loss up to 500°C under air and nitrogen atmosphere. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of trans-di(nitrobenzo)- and di(aminobenzo)-18-crown-6 derivatives with high selectivity

The dibenzo-18-crown-6 derivatives such as di(nitrobenzo)-18-crown-6 and di(aminobenzo)-18-crown-6 were synthesized by nitration reaction and catalytic hydrogenation with high selectivity. The chemical structures were determined by FTIR, ¹H NMR, ¹³C NMR, and UV. Regarding the mixture of Ac₂O and HNO₃ as nitrating agent, the reaction exhibited commendable trans-isomer selectivity. Effects of nitrating agent ratio, reaction temperature and reaction time on yield of trans-di(nitrobenzo)-18-crown-6 were investigated. The yield of trans-di(nitrobenzo)-18-crown-6 was 62.9% for nitrating agent ratio of 1/1, reaction temperature of 50?°C and reaction time of 5?h. Moreover, effect of reaction time on trans-di(aminobenzo)-18-crown-6 was also studied.     

Crowned polyacetylene. I. Synthesis and characterization of poly(4′-ethynylbenzo-15-crown-5)

4′-Ethynylbenzo-15-crown-5 ( EB15C5 ) polymerized with high yields in the presence of (bicyclo[2.2.1] hepta-2,5-diene) rhodium(I) chloride dimer and triethylamine as a cocatalyst in chloroform at 30°C. Common catalysts for the polymerization of substituted acetylenes, WCl₆ and MoCl₅, did not produce any polymer from EB15C5 . The structure of the main chain for poly(4′-ethynylbenzo-15-crown-5) ( PEB15C5 ) was determined to be predomi-nantly cis form, based upon the relatively sharp signals attributed to the main chain atoms that was observed in the ¹H and ¹³C NMR spectra. The cation-binding properties of PEB15C5 are very similar to that of poly(4′-vinylbenzo-15-crown-5), and the selectivity is in the order of K⁺> Rb⁺ ? Cs⁺ ? Na⁺, Li⁺. The electrical conductivity of PEB15C5 increased from 1.3 × 10^?10 to 1.3 × 10^?6 S. cm^?1, when the polymer was doped with iodine. © 1995 John Wiley & Sons, Inc.     

Poole-Frenkel effect in amorphous poly(p-phenylene sulfide)

The conductivity of poly(p-phenylene sulfide) (PPS) amorphous samples sandwiched between metallic electrodes has been studied as a function of applied voltage, temperature, and electrode material. The voltage (U) dependence of the currents for electric fields within the range 10³–10⁶ V/cm exhibits exp βU^1/2 behavior with β = β_Schottky below the glass transition temperature (T_g ≊ 90°C), and β = β_{Poole-Frenkel} above T_g. Coordinated temperature measurements of dc currents with different metallic contacts and thermally stimulated currents (TSC) indicate, however, that the conductivity at T < T_g is consistent with the so-called “anomalous” Poole-Frenkel effect rather than the Schottky effect. Consequently, the p-type conductivity in amorphous PPS is proposed to be a bulk-limited process due to ionization of two different types of acceptor centers in the presence of neutral hole traps. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(vinylcyclohexane) derivatives

Six nearly monodisperse substituted poly(styrene) homopolymers, poly(styrene) (PS), poly(2-methylstyrene) (P2MS), poly(3-methylstyrene) (P3MS), poly(4-methylstyrene) (P4MS), poly(tertiary-butylstyrene) (PtBS), and poly(α-methylstyrene) (FαMS) were anionically polymerized and subsequently saturated using heterogeneous hydrogenation techniques to poly(vinylcyclohexane) (PVCH), poly(2-methylvinylcyclohexane) (P2MVCH), poly(3-methylvinylcyclohexane) (P3MVCH), poly(4-methylvinylcyclohexane) (P4MVCH), and poly(tertiary-butylvinylcyclohexane) (PtBVCH), respectively. In each case, except PαMS, the materials were saturated to > 99% conversion with no chain degradation. PS hydrogenations required the addition of small amounts of tetrahydrofuran to the reaction solvent cyclohexane to enhance miscibility and eliminate large-scale chain degradation. Density gradient and differential scanning calorimetry (DSC) measurements were used to characterize the density and glass transition temperature, T_g, of the unsaturated and saturated polymers. Saturation reduces the density by 3% to 11% and changes T_g substantially. The greatest variation in T_g is obtained with the 3-methyl substituted species where a 63°C increase is observed, while the highest measured T_g is 186°C for P2MVCH. Small-angle neutron scattering (SANS) experiments on binary mixtures of hydrogenous and deuterium labeled PVCH derivatives provided a determination of bulk chain statistics. The statistical segment length is relatively insensitive to vinylcyclohexane ring substitution, except with P3MVCH where a 20% greater value is obtained. ©1995 John Wiley & Sons, Inc.     

Sub-TG relaxations in LiClO4-poly (propylene glycol)-2000 solutions

The dielectric permittivity and loss of LiClO₄ solutions in poly (propylene glycol (PPG)), molecular weight 2000, have been measured over a concentration range up to a ratio of Li⁺ to oxygen atoms in PPG of 33.3:100, between 77 and 350 K. The data have been analyzed in both the permittivity and electrical modulus formalisms. Addition of LiClO₄ to poly (propylene glycol) first increases the height of the β-relaxation peak, and ultimately a second sub-T_g relaxation peak at a higher temperature emerges. This is in addition to the β-relaxation peak due to the reorientation of PPG dipoles, whose strength decreases from that in pure PPG-2000. For a fixed temperature, the dc conductivity initially decreases with increasing Li⁺ concentration up to 20 Li⁺ per 100 O atoms and thereafter increases. This concentration corresponds to that at which the T_g of the solution reaches its limiting value of ca. 310 K. It is concluded that the formation of ion pairs causes a second and slower sub-T_g relaxation process and that the increase in the efficiency of chain packing reduces the strength of the β-relaxation of the polymer.     

Volume dependence of thermal conductivity and bulk modulus for poly(propylene glycol)

The thermal conductivity λ and heat capacity per unit volume of poly(propylene glycol) PPG (0.4 and 4.0 kg·mol⁻¹ in number-average molecular weight) have been measured in the temperature range 150–295 K at pressures up to 2 GPa using the transient hot-wire method. At 295 K and atmospheric pressure, λ = 0.147 W m⁻¹K⁻¹ for PPG (0.4 kg·mol⁻¹) and λ = 0.151 W m⁻¹K⁻¹ for PPG (4.0 kg·mol⁻¹). The temperature dependence of λ is less than 4 × 10⁻⁴ W m⁻¹K⁻² for both molecular weights. The bulk modulus has been measured in the temperature range 215–295 K up to 1.1 GPa. At atmospheric pressure, the room temperature bulk moduli are 1.97 GPa for PPG (0.4 kg·mol⁻¹) and 1.75 GPa for PPG (4.0 kg·mol⁻¹). These data were used to calculate the volume dependence of $ \lambda ,g\, = - \left( {\frac{{\partial \lambda /\lambda }}{{\partial V/V}}} \right)_T $. At room temperature and atmospheric pressure (liquid phase) we find g = 2.79 for PPG (0.4 kg·mol⁻¹) and g = 2.15 for PPG (4.0 kg·mol⁻¹). The volume dependence of g, (∂g/∂ log V)_T varies between −19 to −10 for both molecular weights. Under isochoric conditions, g is nearly independent of temperature. The difference in g between the glassy state and liquid phase is small and just outside the inaccuracy of g of about 8%. The theoretical model for λ by Horrocks and McLaughlin yields an overestimate of g by up to 120%. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 345–355, 1998     

Synthesis,Characterization, Antimicrobial Activities,and Structural Studies of Lanthanide (III) Complexes with 1-(4-Chlorophenyl)-3-(4-fluoro/hydroxyphenyl)prop-2-en-1-thiosemicarbazone

Twelve coordinate lanthanide (III) complexes with the general composition [Ln L₃X_n(H₂O)_n] where Ln = Pr(III), Sm(III), Eu (III), Gd (III), Tb (III), Dy (III), X = Cl^?1, NO₃ ^?2, n = 2–7, and L is 1-(4-chlorophenyl)-3-(4-fluoro/hydroxyphenyl)prop-2-en-1- thiosemicarbazone have been prepared. The lanthanide complexes (5) were derived from the reaction between 1-(4-chlorophenyl)-3-(4-fluoro/hydroxyphenyl)prop-2-en-1-thiosemicarbazone (4) with an aqueous solution of lanthanide salt. Chalcone thiosemicarbazone ligand (4) was prepared by the reaction of [1-(4-chlorophenyl)-3-(4-fluoro/hydroxyphenyl)]prop-2-enone (chalcone) (3) with thiosemicarbazide in the presence of hot ethanol. All the lanthanide-ligand 1:3 complexes have been isolated in the solid state, are stable in air, and characterized on the basis of their elemental and spectral data.

Thiosemicarbazone ligands behave as bidentate ligands by coordinating through the sulfur of the isocyanide group and nitrogen of the cyanide residue. The probable structure for all the lanthanide complexes is also proposed. The chalcone thiosemicarbazone ligands and their lanthanide complexes have been screened for their antifungal and antibacterial studies. Some of the synthesized lanthanide complexes have shown enhanced activity compared with that of the free ligand.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Synthesis and properties of polyimides derived from 1,4-bis(4-aminophenoxy)2,5-di-tert-butylbenzene

Novel aromatic polyimides containing symmetric, bulky di-tert-butyl substituents unit were synthesized from 1,4-bis(4-aminophenoxy)2,5-di-tert-butylbenzene (BADTB) and various aromatic tetracarboxylic dianhydrides by the conventional two-stage procedure that included ring-opening polyaddition in a polar solvent such as N,N-dimethylacetamide to give poly(amic acid)s, followed by cyclodehydration to polyimides. The diamine was prepared through the nucleophilic displacement of 2,5-di-tert-butylhydroquinone with p-chloronitrobenzene in the presence of K₂CO₃, followed by catalytic reduction. Depending on the dianhydrides used, the poly(amic acid)s obtained had inherent viscosities of 0.83–1.88 dL g⁻¹. Most of the polyimides formed transparent, flexible, and tough films. Tensile strength and elongation at break of the BADTB-based polyimide films ranged from 68–93 MPa and 7–11%, respectively. The polyimide derived from 4,4′-hexafluoro-isopropylidenebisphathalic anhydride had better solubility than the other polyimides. These polyimides had glass transition temperatures between 242–298°C and 10% mass loss temperatures were recorded in the range of 481–520°C in nitrogen. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1527–1534, 1997     

Mechanical properties and morphology of epoxy/poly(vinyl acetate)/poly(4-vinyl phenol) brominated system

Diglycidyl ether of bisfenol-A (DGEBA)/poly(vinyl acetate) (PVAc)/poly(4-vinyl phenol) brominated (PVPhBr) ternary blends cured with 4,4’-diaminodiphenylmethane (DDM) were investigated by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). Homogeneous (DGEBA+DDM)/PVPhBr networks with a unique T _g are generated. Ternary blends (DGEBA+DDM)/PVAc/PVPhBr are initially miscible and phase separate upon curing arising two T _gs that correspond to a PVAc-rich phase and to epoxy network phase. Increasing the PVPhBr content the T _gof the PVAc phase move to higher temperatures as a consequence of the PVAc-PVPhBr interactions. Different morphologies are generated as a function of the blend composition.     

Zinc (II), palladium (II) and cadmium (II) complexes containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline derivatives: Synthesis,characterization and methyl methacrylate polymerization

A series of Zn (II), Pd (II) and Cd (II) complexes, [(L) _n MX ₂ ] _m (L = L‐a–L‐c; M = Zn, Pd; X = Cl; M = Cd; X = Br; n, m = 1 or 2), containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline ( L‐a ), 4‐methoxy‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐b ) and 4‐methoxy‐N‐methyl‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐c ) have been synthesized and characterized. The X‐ray crystal structures of Pd (II) complexes [L ₁ PdCl ₂ ] (L = L‐b and L‐c) revealed distorted square planar geometries obtained via coordinative interaction of the nitrogen atoms of pyridine and amine moieties and two chloro ligands. The geometry around Zn (II) center in [(L‐a)ZnCl ₂ ] and [(L‐c)ZnCl ₂ ] can be best described as distorted tetrahedral, whereas [(L‐b) ₂ ZnCl ₂ ] and [(L‐b) ₂ CdBr ₂ ] achieved 6‐coordinated octahedral geometries around Zn and Cd centers through 2‐equivalent ligands, respectively. In addition, a dimeric [(L‐c)Cd(μ ‐ Br)Br] ₂ complex exhibited typical 5‐coordinated trigonal bipyramidal geometry around Cd center. The polymerization of methyl methacrylate in the presence of modified methylaluminoxane was evaluated by all the synthesized complexes at 60°C. Among these complexes, [(L‐b)PdCl ₂ ] showed the highest catalytic activity [3.80 × 10⁴ g poly (methyl methacrylate) (PMMA)/mol Pd hr^?1], yielding high molecular weight (9.12 × 10⁵ g mol^?1) PMMA. Syndio‐enriched PMMA (characterized using ¹H‐NMR spectroscopy) of about 0.68 was obtained with T_g in the range 120–128°C. Unlike imine and amine moieties, the introduction of N‐methyl moiety has an adverse effect on the catalytic activity, but the syndiotacticity remained unaffected.