Dextran oxidized by a malaprade reaction shows main chain scission through a maillard reaction triggered by schiff base formation between aldehydes and amines

Although periodate‐oxidized dextran is widely used in biomedical applications, the degradation mechanism of oxidized dextran has not yet been elucidated. Herein, we propose a novel main chain scission mechanism of oxidized dextran triggered by reaction with amine. NMR analysis revealed four hemiacetal substructures during oxidation by periodate. Kinetic analysis showed that the degradation time constant of the C3‐removed substructure and increasing time constant of the reducing end protons are consistent with the decrease in molecular weight determined by gel permeation chromatography. A methylene group is generated at the same time constant of degradation, indicating that oxidized dextran degradation proceeds via a Maillard reaction. Oxidized dextran does not degrade in saline solution without reactive amine species. Thus, we conclude that oxidized dextran is degraded in the main chain via Schiff base formation through a Maillard reaction, depending on the oxidation ratio and amino acid concentration. These findings help to elucidate the reaction mechanism of polysaccharide degradation and develop novel biodegradable polysaccharide materials for biomedical applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2254–2260     

基于席夫碱键的可注射糖肽水凝胶的制备及性能

以氧化葡聚糖(ODEX)和聚赖氨酸-聚乙二醇-聚赖氨酸(PLL₂₄-PEG-PLL₂₅)三嵌段聚合物为前驱体, 通过ODEX中的醛基与PLL中的氨基之间的席夫碱键反应, 制备了ODEX/PLL₂₄-PEG-PLL₂₅水凝胶. 研究了其凝胶强度、 降解时间及对阿霉素(DOX)释放量的影响. 结果表明, 随着ODEX中醛基密度的增加, 凝胶强度逐渐增大, 最大强度为3100 Pa. 流变学研究结果表明, 由于ODEX中的醛基与DOX中的氨基存在席夫碱键作用, 导致凝胶强度从2160 Pa降至1730 Pa. 降解实验结果表明, ODEX/PLL₂₄-PEG-PLL₂₅水凝胶具有较长的降解时间, 最长时间达到29 d. 药物释放结果表明, ODEX/PLL₂₄-PEG-PLL₂₅水凝胶具有酶促降解释放药物的性能. 在Elastase溶液中, ODEX/PLL₂₄-PEG-PLL₂₅水凝胶所载DOX累积释放量达到最大值74.35%. 结果表明, ODEX/PLL₂₄-PEG-PLL₂₅水凝胶具有进一步应用于体内局部药物传输的潜力.     

Insights into the Oxidative Dehydrogenation of Amines with Nanoparticulate Iridium Oxide

The aerobic oxidation of amines offers a promising route towards many versatile chemical compounds. Within this contribution, we extend our previous investigations of iridium oxide‐catalyzed alcohol oxidation to amine substrates. In addition to demonstrating the versatility of this catalyst, particular attention is focused on the mechanisms of the reaction. Herein, we demonstrate that although amines are oxidized slower than the corresponding alcohols, the catalyst has a preference for amine substrates, and oxidizes various amines at turnover frequencies greater than other systems found in the open literature. Furthermore, the competition between double amine dehydrogenation, to yield the corresponding nitrile, and amine–imine coupling, to yield the corresponding coupled imine, has been found to arise from a competitive reaction pathway, and stems from an effect of substrate‐to‐metal ratio. Finally, the mechanism responsible for the formation of N‐benzylidene‐1‐phenylmethanamine was examined, and attributed to the coupling of free benzyl amine substrate and benzaldehyde, formed in situ through hydrolysis of the primary reaction product, benzyl imine.     

Zinc templated synthesis—a route to get metal ion free tripodal ligands and lariat coronands, containing Schiff bases

A new series of tripodal receptors bearing imine linkages have been prepared in high yields, by a single step condensation reaction between tripodal aromatic amines and aldehydes, using zinc perchlorate as a template. The template cation leaves the pseudo cavity after the Schiff base condensation to give metal free multidentate ligands. These products have been characterized by ¹H, ¹³C NMR, IR, elemental analysis, UV-vis absorption spectroscopy and X-ray crystallographic studies. It has been seen that the presence of a coordinating atom such as O, S, and N at position-2 with respect to the carbonyl group, is mandatory for the reaction to proceed. The template reaction has been also successfully employed to synthesize a lariat type coronand by reacting the tripodal amine with a dialdehyde.     

Structural and Morphological Transformations of Covalent Organic Nanotubes

Covalent organic nanotubes (CONTs) are porous one-dimensional frameworks connected through imine bonds via Schiff base condensation between aldehydes and amines. The presence of two amine groups at the ortho position in the structurally demanding tetraaminotriptycene (TAT) building block leads to multiple reaction pathways between the ditopic aldehyde and the tetratopic amine. We have synthesized five different monomers of CONT-1 by the Schiff base condensation reaction between TAT and o-anisaldehyde. The conversion of imine to imidazole bonding in a monomer is probed using NMR, mass spectrometry, and X-ray diffraction techniques. Solid-state NMR provide insights into the CONTs’ structural connectivity. A theoretical investigation suggests that the π-π stacking could be the driving force for rapid imine to imidazole conversion within the CONT-1. Microscopic imaging sheds further light on the self-assembly process of the CONTs, indicating both head-to-head and side-by-side assembly.     

Grafting of model primary amine compounds to cellulose nanowhiskers through periodate oxidation

This study demonstrates regioselective oxidation of cellulose nanowhiskers using 2.80–10.02 mmols of sodium periodate per 5 g of whiskers followed by grafting with methyl and butyl amines through a Schiff base reaction to obtain their amine derivatives in 80–90 % yield. We found a corresponding increase in carbonyl content (0.06–0.14 mmols/g) of the dialdehyde cellulose nanowhiskers with the increase in oxidant as measured by titrimetric analysis and this was further evidenced by FT-IR spectroscopy. Grafting of amine compounds to the oxidized cellulose nanowhiskers resulted in their amine derivatives, which are found to be partially soluble in DMSO. Therefore, the reduction reaction between amines and carbonyl groups was confirmed through ¹³C NMR spectra, which was also supported by copper titration, XPS, and FT-IR spectroscopy. Morphological integrity and crystallinity of the nanowhiskers was maintained after the chemical modification as studied by AFM and solid-state ¹³C NMR, respectively.     

Reactive interaction of aromatic amines with dialdehyde cellulose gel

A new chromatographic method was developed for separation of amines based on their interaction with aldehyde groups in stationary phase. Expecting specific interaction with aldehyde groups through imine formation (Schiff base), we introduced dialdehyde groups to a commercial cellulose packing by periodate oxidation and examined eluting behavior of various aromatic amines. Primary amines with acid dissociation constants (pKa) greater than 6 showed no delay at pHs of 4.0–5.5, indicating the lack of interaction because of complete protonation. Primary amines with pKa less than 6 showed remarkable delays according to the amount of aldehyde groups on cellulose. The delay was dependent on the pH of eluent. The amines with pKa of 4–5.3 eluted faster at lower pH, apparently because of the change in proportion of free and protonated species. Amines with pKa less than 3.4 also showed delays but they eluted slower at lower pH. The latter behavior can be ascribed to the change in the ratio of free/protonated species of imines formed. Certain degree of steric effect was also noted, that is, compounds with a primary amino group adjacent to bulky substituents (ortho compounds) showed weaker interaction with aldehyde groups than meta- and para-isomers.     

Pyridylidene‐Mediated Dihydrogen Activation Coupled with Catalytic Imine Reduction

In recent years, dihydrogen activation at non‐metallic centers has received increasing attention. A system in which dihydrogen is trapped by a pyridylidene intermediate that is generated from a pyridinium salt and a base is now reported. The dihydropyridine formed in this process can act as reducing agent towards organic electrophiles. By coupling the hydrogen‐activation step with subsequent hydride transfer from the dihydropyridine to an imine, a catalytic process was established. Treatment of the N‐phenylimine of phenyl trifluoromethyl ketone with 5–20 mol % of N‐mesityl‐3,5‐bis(2,6‐dimethylphenyl)pyridinium triflate and 0.3–1.0 equivalents of LiN(SiMe₃)₂ under 50 bar of hydrogen gas resulted in high conversion into the corresponding amine.     

Synthesis and characterization of poly(vinyl amine)‐based amphiphilic comb‐like dextran glycopolymers by a two‐step method

Poly(vinyl amine) (PVAm)‐based amphiphilic glycopolymers were synthesized by a two‐step method, that is dextran molecules (Dex, M_w = 1500) were attached to the PVAm backbone by reacting amine groups with dextran lactone, and then, hexanoyl groups (Hex) were attached by reacting the PVAm free amine groups with N‐(hexanoyloxy)succinimide. By adjustment of the feed ratios of Dex/Hex, amphiphilic comb‐like glycopolymers with various hydrophilic and hydrophobic balances were prepared, and their structures were characterized by ¹H NMR. Surface activity of the amphiphilic glycopolymers at the air/water interface was demonstrated by reduction in water surface tension. Adsorption of the amphiphilic glycopolymers at the solid/water interface was examined on octadecyltrichlorosilane (OTS)‐coated coverslips by water contact angle measurements. The results show that the amphiphilic glycopolymers need about 20 mol % of dextran attachment to make an effective hydrophilic coating. In comparison with the one‐step reaction by addition of dextran lactone and alkyl succinimide simultaneously, the two‐step approach can attach Dex on PVAm as high as possible in the first step, and offers quantitative advantages in controlling the ratio of hydrophilic and hydrophobic chains along the PVAm backbone, resulting in increased water solubility for the final amphiphilic glycopolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 192–199, 2006     

Synthesis of a New Series of N‐Mannich Bases and Polyhydroxy Mannich Bases of Pharmaceutical Interest Related to Isatin and Its Schiff Bases

The reaction of isatin 1 with benzaldehyde and a sec‐amine or the appropriate aldimine afforded the N‐Mannich bases 2 – 3 and the bis‐base 4 . Treatment of 1 with glutaric dialdehyde and morpholine gave the bis‐base 5 . Mannich reaction of the Schiff bases 6a – f derived from 1 , led to the new Mannich bases and bis‐bases 7 – 9 . The use of N‐methyl‐D‐glucamine as the amine component in the Mannich reaction with 6b – f led to the polyhydroxy Mannich bases 11 – 13 .     

Synthesis and Characterization of Chitosan/ Dextran-Based Hydrogels for Surgical Use

A series of hydrogels were formed from the reaction between an amine functionalized succinyl chitosan and an oxidized dextran. The properties and rate of formation of the gel were related to both the amine and aldehyde levels of the precursors. These levels could be readily changed by altering the reaction conditions, and allowed good control of the gel properties. Oxidation of the dextran with periodate was accompanied by chain scission and a large reduction in molecular weight. The gel showed excellent haemostatic properties and reduction of adhesions in animal models.     

Diastereoselective Synthesis of Benzoxanthenones

An oxidative catalytic vanadium(V) system was developed to access the naturally nonabundant diastereomers of carpanone from the corresponding alkenyl phenol monomer in one pot by tandem oxidation, oxidative coupling, and 4+2 cyclization. This system was applied to the synthesis of two other analogues of carpanone. Mild oxidizing silver salts were used as the terminal oxidant to minimize background oxidation which produces the natural diastereomer of carpanone. Further, the first examples of enantioselective oxidative benzoxanthenone formation are reported. Solvent polarity has a strong effect on enantioselectivity, consistent with a mechanism involving binding of vanadium Schiff base catalysts to the alcoholic moiety of the alkenyl phenols during the cyclization step.     

Synthesis,characterization and catalytic properties of novel palladium(II) complexes containing aromatic sulfonamides: effective catalysts for the oxidation of benzyl alcohol

In this article, N‐(2‐aminophenyl)arylsulfonamides (1–5) were successfully synthesized by the reaction of o‐phenylenediamine and various benzenesulfonyl chlorides. The Schiff base derivatives (1a–f; 4e) of those compounds were obtained using different aldehydes. Then, a series of neutral‐four coordinate Pd(II) complexes (6–10) were prepared from the reaction of Pd(OAc)₂ and 1–5. On the other hand, when we tried to synthesize Pd(II) complexes containing Schiff base/sulfonamide ligands, two different situations were observed. Generally, when an electron‐donating group was attached to the imine fragment (1a–d) except for 1f, the Schiff base hydrolyzed and 6 was isolated. When an electron‐withdrawing group was attached to the imine fragment (1e, 4e), neutral four‐coordinate Pd(II) complexes (11–13) bearing Schiff base/sulfonamide ligands were isolated. The synthesized compounds were characterized by FT‐IR, elemental analysis and NMR spectroscopy. The complexes were used as a catalyst in the oxidation reaction of benzyl alcohol to benzaldehyde in the presence of H₅IO₆ in acetonitrile. All complexes showed satisfactory catalytic activity. The highest catalytic activity was obtained with 9. Copyright © 2012 John Wiley & Sons, Ltd.     

Application of Periodate Oxidized Glucans to Biochemical Reactions

ABSTRACT

Periodate oxidation of glucans afforded a dialdehyde structure, which was highly reactive with various compounds containing amino groups. A covalent Schiff base linkage was readily formed at the alkaline pH of 8-9 and cyclodextrin dialdehyde gave both positively and negatively charged derivatives upon incubation with hexamethylenediamine and ?-aminocaproic acid, respectively. Binding of the amino group containing a fluorescent probe of ethylenediaminonaphthalene yielded fluorescent glycogen, which was hydrolyzed with Taka-amylase A. By gel filtration with a Bio-Gel P-2 column, hydrolyzed oligosaccharides containing a fluorescent probe were strongly retained to the column. Dextran dialdehyde was useful in producing a covalent linkage with trypsin under very mild conditions, and the enzyme-dextran complex formed was recovered in a high-molecular weight and active form. Thus, various glucan dialdehydes may serve as useful cross-linking reagents for enzymes.     

One-Pot Direct Oxidation of Primary Amines to Carboxylic Acids through Tandem ortho-Naphthoquinone-Catalyzed and TBHP-Promoted Oxidation Sequence

Biomimetic oxidation of primary amines to carboxylic acids has been developed where the copper-containing amine oxidase (CuAO)-like o-NQ-catalyzed aerobic oxidation was combined with the aldehyde dehydrogenase (ALDH)-like TBHP-mediated imine oxidation protocol. Notably, the current tandem oxidation strategy provides a new mechanistic insight into the imine intermediate and the seemingly simple TBHP-mediated oxidation pathways of imines. The developed metal-free amine oxidation protocol allows the use of molecular oxygen and TBHP, safe forms of oxidant that may appeal to the industrial application.     

Biological aspects of Schiff base–metal complexes derived from benzaldehydes: an overview

Schiff bases are stable imines containing C=N, where N is bonded to an alkyl or aryl group, but not with hydrogen and are prepared by condensation of aliphatic or aromatic primary amine with carbonyl compounds. They have the general formula R₁R₂C?=?NR₃, where R₃?≠?H. The presence of the basic donor N atom and the stability of the imine function render Schiff bases as the most favored ligands that have the ability to stabilize metal ions in different oxidation states. The chelating environment in a Schiff base profoundly influences the electron distribution in the coordination sphere of metal in a complex and thereby regulates the property of the compounds in a big way. The structural diversity in some of the metal complexes with multidentate Schiff base ligands has triggered a wide range of applications of this class of compounds in sensors, catalysis, biology, medicines, and photonics. This review compiles the synthesis and biological activities (antimicrobial, antioxidant, anticancer, antitubercular, DNA interaction studies) of benzaldehyde-based Schiff bases and their metal complexes.     

The crosslinking of epoxy resins at interfaces. V. Amine-cured resins at carbon and graphite surfaces

The effects of carbon blacks, chopped carbon fibers, and crushed carbon fibers on the crosslinking chemistry of a diglycidyl epoxy resin/m-phenylenediamine system were examined by infrared (IR) spectroscopy and differential scanning calorimetry (DSC). The carbon and graphite surfaces were given oxidizing and reducing treatment to simulate the surface treatment of carbon fibers used in the manufacture of composites. The oxidized carbon surfaces initially accelerated epoxy–amine reactions but inhibited the later stages of the reaction such that the final extent of cure was reduced. The oxidized carbons also preferentially adsorbed the amine curing agent, resulting in a stoichiometric imbalance at the interface.     

Dinuclear and polynuclear transition metal complexes with macrocyclic ligands. 6. New dinuclear copper(ii) complexes with macrocyclic Schiff bases derived from 4-tert-butyl-2,6-diformylphenol

New dinuclear complexes containing Cu^II atoms in the cavity of a macrocyclic Schiff base were prepared by template condensation of 4-tert-butyl-2,6-diformylphenol with 1,3-diaminopropane in the presence of Cu^II trimethylacetate and chloride as well as by extra-ligand exchange. The mononuclear Cu^II complex with two 1,3-diaminopropane molecules can serve as an intermediate in this template synthesis. The reaction of Cu^II trimethylacetate with the unsymmetrical macrocyclic Schiff base synthesized earlier afforded a new dinuclear copper(ii) complex with the amine and imine nitrogen atoms in the coordination sphere. The structures of the new complexes were established by X-ray diffraction analysis and studied by the density functional theory (gradient-corrected PBE functional, TZ2p basis set).     

Synthesis and characterization of epoxy resins containing imine group and their curing processes with aromatic diamine

The epoxy resins containing imine bonding were prepared from hydroxyl substituted Schiff base monomers in two steps. At the first step, hydroxyl substituted Schiff base monomers were synthesized via condensation reaction. At the second step, epoxy resins were synthesized from the reaction between Schiff base monomers and epichlorohydrine (EPC). Then curing processes of epoxy resins were achieved by p-phenylenediamine compound. The structures of resulting compounds were confirmed by FT-IR, UV-Vis and ¹H-NMR. TG-DTA and DSC measurements were performed for thermal characterizations of the compounds. Chemical resistances of the cured epoxy-amine systems were determined for coating applications in acidic, alkaline and organic solvents. HCl (10%, aqueous solution), NaOH (10%, aqueous solution), DMSO, DMF, N-methylpyrrolidone, ethanol, THF and acetone were used for corrosion tests. Chemical resistance data of the synthesized epoxy resins demonstrated that they have good chemical resistance against various acid, alkaline and common organic solvents. Surface morphologies of epoxy resin and the cured epoxy resin were determined with scanning electron microscopy (SEM) measurements. Also, optical band gap (E_g) values of Schiff base monomers and epoxy resins were calculated from UV-Vis measurements.     

Hydrophobization and characterization of internally crosslink-reinforced cellulose fibers

Transforming hydrophilic cellulose fibers into hydrophobic, non-hygroscopic fibers could potentially lead to a variety of new products, such as flexible packaging, self-cleaning films and strength-enhancing agents in polymer composites. To achieve this, softwood cellulose pulp was chemically modified with successive chemical treatments. First the C2 and C3 hydroxyl groups of the glucose units were selectively oxidized by periodate oxidation to reactive dialdehyde units on the cellulose chain, followed by a Schiff base reaction with 1,12-diaminododecane to crosslink the microfibrils within the fiber wall. This was done, because introducing high levels of alkylation resulted in fiber disintegration, which could be prevented by crosslinking. After internal crosslinking a second Schiff base reaction was performed with butylamine. This procedure yielded highly hydrophobic and low-hygroscopic cellulosic materials. The modified cellulose fibers were investigated by a variety of techniques, including Fourier transform infrared spectroscopy, nuclear magnetic resonance, field-emission scanning electron microscopy, thermogravimetric analysis, X-ray diffraction, moisture sorption and water contact angle measurements. The water uptake of the fibers after being modified reduced from 4 to around 1 %. Various reaction conditions were studied for optimum performance.