Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

New insight into the substituent effects on the hydrolytic deamination of saturated and unsaturated cytosine

Ab initio calculations were carried out to understand the effect of electron donating groups (EDG) and electron withdrawing groups (EWG) at the C5 position of cytosine (Cyt) and saturated cytosine (H₂Cyt) of the deamination reaction. Geometries of the reactants, transition states, intermediates, and products were fully optimized at the B3LYP/6-31G(d,p) level in the gas phase as this level of theory has been found to agree very well with G3 theories. Activation energies, enthalpies, and Gibbs energies of activation along with the thermodynamic properties (ΔE, ΔH, and ΔG) of each reaction were calculated. A plot of the Gibbs energies of activation (ΔG^‡) for C5 substituted Cyt and H₂Cyt against the Hammett σ-constants reveal a good linear relationship. In general, both EDG and EWG substituents at the C5 position in Cyt results in higher ΔG^‡ and lower σ values compared to those of H₂Cyt deamination reactions. C5 alkyl substituents ( H,  CH₃,  CH₂CH₃,  CH₂CH₂CH₃) increase ΔG^‡ values for Cyt, while the same substituents decrease ΔG^‡ values for H₂Cyt which is likely due to steric effects. However, the Hammett σ-constants were found to decrease at the C5 position of cytosine (Cyt) and saturated cytosine (H2Cyt) on the deamination reaction. Both ΔG^‡ and σ values decrease for the substituents Cl and Br in the Cyt reaction, while ΔG^‡ values increase and σ decrease in the H₂Cyt reaction. This may be due to high polarizability of bromine which results in a greater stabilization of the transition state in the case of bromine compared to chlorine. Regardless of the substituent at C5, the positive charge on C4 is greater in the TS compared to the reactant complex for both the Cyt and H₂Cyt. Moreover, as the charges on C4 in the TS increase compared to reactant, ΔG^‡ also increase for the C5 alkyl substituents ( H,  CH₃,  CH₂CH₃,  CH₂CH₂CH₃) in Cyt, while ΔG^‡ decrease in H₂Cyt. In addition, analysis of the frontier MO energies for the transition state structures shows that there is a correlation between the energy of the HOMO–LUMO gap and activation energies.     

Determination of maximum loading capacity of polyamidoamine (PAMAM) dendrimers and evaluation of Cu55 dendrimer‐encapsulated nanoparticles for catalytic activity

Spectrophotometric titrations provide information about the interior of the polyamidoamine (PAMAM) dendrimers, and therefore how nanoparticles are encapsulated. In this work, binding studies were performed to determine maximum loading capacities (N) of hydroxyl terminated G4, G5, and G6 PAMAM dendrimers with Cu²⁺ ions. The values of N found via spectrophotometric titrations were 16.22, 31.86, and 57.36 for G4‐OH, G5‐OH, and G6‐OH, respectively. The determination of loading capacity was also done using Viva spin filtration, and the results were found to be in agreement with those found via spectrophotometric titrations. From the binding isotherm, the values of equilibrium constant (K′) were determined and found to be 0.0488 (G4‐OH), 0.0291 (G5‐OH), and 0.0158 (G6‐OH). Owing to instability of G4‐OH (Cu₁₆), G5‐OH (Cu₃₂), and G6‐OH (Cu₅₇) dendrimer‐encapsulated nanoparticles (DENs) synthesized, G6‐OH (Cu₅₅) DENs of average size 2.6 ± 0.3 nm were prepared and were found to be relatively stable. Thus G6‐OH (Cu₅₅) catalyst was evaluated for the reduction of 4‐nitrophenol and was found to be catalytically active toward reduction of 4‐nitrophenol. Reaction kinetics of 4NP reduction was thoroughly studied in light of the Langmuir‐Hinshelwood kinetic model, and surface rate k, and the adsorption rates K_4NP, and K_BH4 were determined. The reaction was performed at different temperatures, which further expanded the study into determination of thermodynamic (ΔH^‡, ΔS^‡, ΔG^‡, and E_A) parameters.     

DFT analysis of the linkage isomerism in penta(ammine)ruthenium(II/III) complexes of benzotriazole: Natural bond orbital method approach and a comprehensive energy decomposition analysis

Penta(ammine)ruthenium benzotriazole complexes [Ru^II/III(NH₃)₅bta]^+/2+ and [Ru^II/III(NH₃)₅btaH]^2+/3+ (bta and btaH are the deprotonated and neutral form of the triazole ligand, respectively) can exhibit two linkage isomers κN1 and κN2. This system was investigated by density functional theory natural bond orbitals analysis and Su-Li energy decomposition analysis. Steric, electrostatic, exchange, repulsion, polarization, and dispersion energy components of the total metal–ligand interaction were quantitatively evaluated, and revealed that the overall metal-triazole ligand is comprised of donor–acceptor interactions like σ-donation and π-back-donation, which favors a specific isomer depending on the oxidation state of the ruthenium and the charge of the ligand. Further, activation energies (ΔG^‡) for linkage isomerization reactions were calculated. Results were correlated with experimental chemical–electrochemical data and two plausible mechanisms are discussed. © 2019 Wiley Periodicals, Inc.     

Antibacterial,spectral and thermal aspects of drug based‐Cu(II) mixed ligand complexes

The antibiotic agent clioquinol is well known for its drug design and coordinating ability towards metal ions. Copper(II) mixed‐ligand complexes of clioquinol with various uninegative bidentate ligands were prepared. The structure of the synthesized complexes was characterized using elemental analyses, infrared spectra, ¹H‐NMR spectra, electronic spectra, magnetic measurements, FAB mass spectrum and thermo gravimetric analyses. The kinetic parameters such as order of reaction (n) and the energy of activation (E_a) are reported using the Freeman–Carroll method. The pre‐exponential factor (A), the activation entropy (ΔS^#), the activation enthalpy (ΔH^#) and the free energy of activation (ΔG^#) were calculated. Complexes were also screened for their in vitro antibacterial activity against a range of Gram‐positive and Gram‐negative bacteria in order to set the precursors for anti‐tumourigenic agent. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and properties of polydimethylsiloxane-containing block copolymers via living radical polymerization

Polydimethylsiloxane (PDMS) block copolymers were synthesized by using PDMS macroinitiators with copper-mediated living radical polymerization. Diamino PDMS led to initiators that gave ABA block copolymers, but there was low initiator efficiency and molecular weights are somewhat uncontrolled. The use of mono- and difunctional carbinol–hydroxyl functional initiators led to AB and ABA block copolymers with narrow polydispersity indices (PDIs) and controlled number-average molecular weights (M_n's). Polymerization with methyl methacrylate (MMA) and 2-dimethylaminoethyl methacrylate (DMAEMA) was discovered with a range of molecular weights produced. Polymerizations proceeded with excellent first-order kinetics indicative of living polymerization. ABA block copolymers with MMA were prepared with between 28 and 84 wt % poly(methyl methacrylate) with M_n's between 7.6 and 35 K (PDI <1.30), which show thermal transitions characteristic of block copolymers. ABA block copolymers with DMAEMA led to amphiphilic block copolymers with M_n's between 9.5 and 45.7 K (PDIs of 1.25–1.70), which formed aggregates in solution with a critical micelle concentration of 0.1 g dm⁻³ as determined by pyrene fluorimetry experiments. Monocarbinol functional PDMS gave AB block copolymers with both MMA and DMAEMA. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1833–1842, 2001     

Effect of Hydrophilic/Hydrophobic Block Ratio and Temperature on the Surface and Associative Properties of Oxyethylene and Oxybutylene Diblock Copolymers in Aqueous Media

Recent development in dispersion science and technology demands block copolymers with a variable block length and composition. To highlight that purpose, the surface active, associative, colloidal, and thermodynamic behavior of three diblock copolymers having different hydrophilic to hydrophobic ratio is reported here. Using surface tension and light scattering measurements, the micellization and adsorption behavior of polyoxyethylene and polyoxybutylene diblock copolymers of the type E_mB_n have been analyzed. Critical micelle concentration (CMC) and related thermodynamic parameters like free energy (ΔG_mic), enthalpy (ΔH_mic), and entropy (ΔS_mic) of micellization were calculated from CMC value using the closed association model. Likewise, the surface active parameters, like surface excess concentration (Γ₂), area per molecule (A₂), and thermodynamic parameters such as free energy (ΔG_ads), enthalpy (ΔH_ads), and entropy (ΔS_ads) of adsorption of polymer at the air/water interface, were also calculated at various temperatures. Static and dynamic light scattering techniques were employed for the determination of the weight-average molar (M_w), association number (N_w), polymer–water interaction (A₂), and micellar size in terms of hydrodynamic radii (R_h) of copolymer micelles. The effect of block length and solution temperature on the surface and micellar properties of these copolymers was also investigated.     

A DFT study on the reaction mechanism of the gold(I)-catalyzed cycloisomerization of alkynylhydroxyallylamides to 4-Oxa-6-azatricyclo[3.3.0.02,8]octane and 3-Acyl-4-alkenylpyrrolidine

In this study, we use density functional theory calculations to investigate the discrepancy between two experimental results of Au(I)-catalyzed cycloisomerization reactions of alkynylhydroxyallyl tosylamide under similar reaction conditions, with the only variations being reaction temperature and time. The experimental results reported by Yeh and Chung groups, respectively, showed that 3-acyl-4-alkenylpyrrolidines are produced dominantly at ambient temperature, while 4-aza-6-oxatricyclo[3.3.0.0^2,8]octanes are produced in higher yield at elevated temperature. Using (Z)-4-([3-phenylprop-2-yn-1-yl]amino)but-2-en-1-ol and [Au(PPh₃)]⁺ as the model starting material and active catalyst species, respectively, we identified two major pathways leading to 4-aza-6-oxatricyclo[3.3.0.0^2,8]octane (pathway I ) and 3-acyl-4-alkenylpyrrolidine (pathway II ). The overall free energy barrier (ΔG^‡_max) and the energetic span (ΔG^‡_span) of each pathway were 38.3 and 48.4 kcal/mol for pathway I and 29.0 and 37.1 kcal/mol for pathway II . Our analysis shows that the disparate outcomes observed in the experiments by two separate groups mainly originate in the reaction kinetics, with both the overall activation barrier and energetic span being the important factor.     

Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(22) 5845 New multiblock copolymers derived from poly(L‐lactic acid) (PLLA) and poly(ε‐caprolactone) (PCL) were prepared with the coupling reaction between PLLA and PCL oligomers with ? NCO terminals. Fourier transform infrared (FTIR), ¹³C NMR, and differential scanning calorimetry (DSC) were used to characterize the copolymers and the results showed that PLLA and PCL were coupled by the reaction between ? NCO groups at the end of the PCL and ? OH (or ? COOH) groups at the end of the PLLA. DSC data indicated that the different compositions of PLLA and PCL had an influence on the thermal and crystallization properties including the glass‐transition temperature (T_g), melting temperature (T_M), crystallizing temperature (T_c), melting enthalpy (ΔH_m), crystallizing enthalpy (ΔH_c), and crystallinity. Gel permeation chromatography (GPC) was employed to study the effect of the composition of PLLA and PCL and reaction time on the molecular weight and the molecular weight distribution of the copolymers. The weight‐average molecular weight of PLLA–PCL multiblock copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL, whereas that of the homopolymer of PLLA was only 14,000. A polarized optical microscope was used to observe the crystalline morphology of copolymers; the results showed that all polymers exhibited a spherulitic morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5045–5053, 2004     

Theoretical prediction of Ni(I)-catalyst for hydrosilylation of pyridine and quinoline

Catalytic synthesis of dihydropyridine by transition-metal complex is one of the important research targets, recently. Density functional theory calculations here demonstrate that nickel(I) hydride complex (bpy)Ni^IH (bpy = 2,2′-bipyridine) 1 is a good catalyst for hydrosilylation of both quinoline and pyridine. Two pathways are possible; in path 1, substrate reacts with 1 to form stable intermediate Int1 . After that, N³─C¹ bond of substrate inserts into Ni─H bond of 1 via TS1 to afford N-coordinated 1,2-dihydroquinoline Int2 with the Gibbs activation energy (ΔG°^‡) of 21.8 kcal mol⁻¹. Then, Int2 reacts with hydrosilane to form hydrosilane σ-complex Int3 ; this is named path 1A. In the other route (path 1B), Int1 reacts with phenylsilane in a concerted manner via hydride-shuttle transition state TS2 to afford Int3 . In TS2 , Si atom takes hypervalent trigonal bipyramidal structure. Formation of hypervalent structure is crucial for stabilization of TS2 (ΔG°^‡ = 17.3 kcal mol⁻¹). The final step of path 1 is metathesis between Ni─N³ bond of Int3 and Si─H bond of PhSiH₃ to afford N-silylated 1,2-dihydroproduct and regenerate 1 (ΔG°^‡ = 4.5 kcal mol⁻¹). In path 2, 1 reacts with hydrosilane to form Int5 , which then forms adduct Int6 with substrate through Si–N interaction between substrate and PhSiH₃. Then, N-silylated 1,2-dihydroproduct is produced via hydride-shuttle transition state TS5 (ΔG°^‡ = 18.8 kcal mol⁻¹). The absence of N-coordination of substrate to Ni^I in TS5 is the reason why path 2 is less favorable than path 1B. Quinoline hydrosilylation occurs more easily than pyridine because quinoline has the lowest unoccupied molecular orbital at lower energy than that of pyridine. © 2019 Wiley Periodicals, Inc.     

Polyesters containing sulfur. VI. Synthesis and characterization of polyesters from naphthalene-1,4- or naphthalene-1,5-bis(methylthioacetic acid) and aliphatic diols

Two series of new linear polyesters containing sulfur in the main chain were obtained by melt polycondensation of naphthalene-1,4-bis(methylthioacetic acid) (N-1,4-BMTAA) or naphthalene-1,5-bis(methylthioacetic acid) (N-1,5-BMTAA) with some aliphatic diols using a 0.05 molar excess of diol. Softening temperatures ranging from 55 to 130°C, reduced viscosities in the range of 0.15–0.39 dL/g, and low-molecular weights were their characteristic. The structure and thermal properties of all polyesters were examined by using elemental analysis, FT-IR and ¹H-NMR spectroscopy, X-ray diffraction analysis, differential thermal analysis (DTA), thermogravimetric analysis (TGA), and differential scanning calorymetry (DSC). The kinetics of polyester formation by uncatalyzed melt polycondensation was studied in a model system: N-1,4-BMTAA or N-1,5-BMTAA and 2,2′-oxydiethanol (ODE) at 150, 160, and 170°C. Reaction rate constants (k₃) and activation parameters (ΔG^‡, ΔH^‡, ΔS^‡) from carboxyl group loss were determined using classical kinetic methods. Hydroxyl-terminated polyesters derived from 1,4-butanediol, 1,5-pentanediol, and 1,6-hexanediol were used for preparation of the polyurethanes by melt polyaddition with hexamethylene diisocyanate (HDI). They were characterized by reduced viscosity, FT-IR spectroscopy, X-ray diffraction analysis, TGA, DSC, polarizing microscope observation, and hardness and tensile properties. The resulting polyurethanes behave like high-elasticity thermoplastic elastomers, except the one derived from N-1,5-BMTAA and 1,6-hexanediol-based polyester. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2359–2369, 1998     

Chemical modification of poly(substituted-acetylene). I. Synthesis and gas permeability of poly(1-trimethylsilyl-1-propyne)/poly (dimethylsiloxane) graft copolymer

In order to improve the selectivity and the stability and the stability for gas permeation of poly (1-trimethylsilyl-1-propyne) (PTMSP) membrane, it was chemically modified by grafting polydimethylsiloxane (PDMS) chains. The graft copolymers were synthesized by four different methods via metallation of PTMSP with n-butyllithium. PDMS content of the graft co-polymers was controlled in the range of 4–92 mol %. Very tough, thin membranes could be prepared from these graft copolymers using a solvent casting method. Thermal property and gas permeability of the copolymer membranes thus obtained were evaluated. These membranes were relatively thermally stable, and the softening points were over about 150°C. Oxygen permeability coefficients Po₂ and selectivity Po₂/PN₂ of PTMSP/PDMS graft copolymers depended on the PDMS content, the former was in the range of 1 X 10^?8 to 2 × 10^?7 cm³ (STP)· cm/(cm²· s · cm. Hg) and the latter was 2.0–3.1. Minimum values of PO₂ and PN₂ occured at PDMS content of about 55 mol %. The introduction of more than 60 mol % of PDMS resulted in oxygen permeability coefficient which was maintained for more than one moth (PO₂ = 2 ? 6 × 10 ^?8 cm ³ (STP)· cm/(cm²·s·cm Hg), PO₂/PN₂ = 2.3–2.7).     

Substituent Effect on the Stability and 14N NQR Parameters of Linkage Isomers of Nitriles in a Rhodium Half‐Sandwich Metallacycle: A Theoretical Study

In this work, using the MPW1PW91 method, the substituent effect on the stability and on the ¹⁴N NQR parameters of linkage isomers of nitriles in a rhodium half‐sandwich metallacycle is illustrated. After determination of the corresponding isomerization transition state (TS), the substituent effect on the barrier energy and on the activation thermodynamic parameters (ΔG^‡ and ΔH^‡) of isomerization is explored. The electric field gradient tensor, nuclear quadrupole coupling constant, asymmetry parameter, and nuclear quadrupole resonance frequencies of the studied isomers are calculated. Also, linear correlations between these parameters and Hammett constant of the substituent are explored.     

Polyimide polydimethylsiloxane triblock copolymers for thin film composite gas separation membranes

This article demonstrates the successful fabrication of thin‐film‐composite (TFC) membranes containing well‐defined soft‐hard‐soft triblock copolymers. Based on “hard” polyimide (PI) and “soft” polydimethylsiloxane (PDMS), these triblock copolymers (PDMS‐b‐PI‐b‐PDMS), were prepared via condensation polymerization, and end‐group allylic functionalization to prepare the polyimide component and subsequent “click” coupling with the soft azido functionalized PDMS component. The selective layer consisted of pure PDMS‐b‐PI‐b‐PDMS copolymers which were cast onto a precast crosslinked‐PDMS gutter layer which in turn was cast onto a porous polyacrylonitrile coated substrate. The TFC membranes' gas transport properties, primarily for the separation of carbon dioxide (CO₂) from nitrogen (N₂), were determined at 35 °C and at a feed pressure of 2 atm. The TFC membranes showed improvements in gas permselectivity with increasing PDMS weight fraction. These results demonstrate the ability for glassy, hard polymer components to be coated onto otherwise incompatible surfaces of highly permeable soft TFC substrates through covalent coupling. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3372–3382     

Acoustical and excess thermodynamic studies of mixtures of 2-pyrrolidone with 1,3-propanediol and water as well as 1,3-propanediol with water at 308.15 K

The density (ρ), viscosity (η) and ultrasonic velocity (u) of three mixtures consisting of 2- pyrrolidone with 1,3-propanediol (PD) and water and also of PD and water have been measured as a function of mole fraction at 308.15 K. The experimentally collected data has been used to calculate the excess molar volume (V^E), deviation in viscosity (Δη), deviation in ultrasonic velocity (Δu), isentropic compressibility (κ_s), deviation in isentropic compressibility (Δκ_s) and excess Gibbs free energy of activation (ΔG*^E). The Redlich–Kister polynomial equation has been used to fit the derived parameters. The variation in excessive thermodynamic properties as a consequence of possible molecular interactions is discussed.     

Incorporation of polydimethylsiloxane into polyurethanes and characterization of copolymers

Novel copolymers of polyurethane (PU) were prepared by direct transurethanetion reaction of a commercial PU with polydimethylsiloxanes (PDMS, MW 1000, 5000, and 10,000) containing hydroxyl end-groups. Transurethanetions with different mass ratios of hydrophobic PDMS to hydrophilic PU chains (PDMS1000–PU: 43:57, 67:33, 71:29, and 80:20; PDMS5000–PU: 37:63, and 51:49; PDMS10000–PU: 51:49) were carried out in solution at 65 and 100 °C. In catalyzed reactions, dibutyltin dilaurate (SnC₃₂H₆₄O₄) was used to promote bond breaking in the PU chain and accelerate the reaction between hydroxyl end-groups of PDMS and regenerated isocyanates of PU. The chemical structures of the prepared copolymers were comprehensively characterized by ¹H, ¹³C, and ²⁹Si NMR spectroscopies. According to elemental analysis, the content of PDMS varied between 3 wt.% and 16 wt.%, and results obtained from the ¹H NMR spectroscopy were in good agreement with the results of elemental analysis. Increased length of the hydrophobic chain increased the content of PDMS in the copolymer. The GPC results showed that molar masses of the PUPDMS copolymers were lower than the molar mass of the starting PU. The glass transitions (T_g) of the copolymers were shifted to lower temperature as compared with T_g of the starting polyurethane. ATR FTIR spectroscopy showed the surface of the copolymer films to be enriched with siloxane groups and, according to electron microscopy, it was textured with microspheres. The static contact angles for copolymer films measured with deionized water ranged from 94° to 117°. The different structural, thermal and surface properties of the PUPDMS copolymers as compared with PU indicated that transurethanetion had taken place.     

Syntheses,Crystal Structures,and Thermal Properties of Energetic Semicarbazide Salt,Manganese(II) Salt,and Coordination Compound of 3,5‐Dinitrobenzoic Acid

Nitro compounds have been actively researched as driven by their potential to be high‐performing energetic materials. Herein, three new nitro compounds including semicarbazide 3,5‐dinitrobenzoate, (SCZ)(DNBA), manganese 3,5‐dinitrobenzoate dihydrate, [Mn(DNBA)₂(H₂O)₂]_n, and bis(semicarbazide) manganese(II) 3,5‐dinitrobenzoate, Mn(SCZ)₂(DNBA)₂, were synthesized and characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction analysis. The results indicated that the above mentioned compounds are ionic, polymeric, and molecular in nature, respectively. Moreover, their thermal decomposition properties were assessed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Their non‐isothermal reaction kinetics parameters, critical temperature of thermal explosion (T_bp), entropy of activation (ΔS^≠), enthalpy of activation (ΔH^≠), and free energy of activation (ΔG^≠) of the exothermic decomposition process were also calculated. Results suggest that there was a relationship between the structure and thermal stability.     

Synthesis and characterization of model polybutadiene‐1,4‐b‐polydimethylsiloxane‐b‐polybutadiene‐1,4 copolymers

Model copolymers of poly(butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS‐b‐PB, were synthesized by sequential anionic polymerization (high vacuum techniques) of 1,3‐butadiene and hexamethylciclotrisiloxane (D₃) on sec‐BuLi followed by chlorosilane‐coupling chemistry. The synthesized copolymers were characterized by nuclear magnetic resonance (¹H NMR), size‐exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). SEC and ¹H NMR results showed low polydispersity indexes (M_w/M_n) and variable siloxane compositions, whereas DSC and TGA experiments indicated that the thermal stability of the triblock copolymers depends on the PDMS composition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2726–2733, 2007     

A Novel Stable High‐Nitrogen Energetic Compound: Copper(II) 1,2–Diaminopropane Azide

The multi‐ligand coordination compound copper(II) 1,2‐diaminopropane (pn) azide, [Cu(pn)(N₃)₂]_n ( 1 ), was synthesized using pn and azido groups. It was characterized by X‐ray single crystal diffraction, elemental analysis, and FT‐IR spectroscopy. The crystal structure of 1 belongs to the monoclinic system, space group C2/c. The copper(II) cation is six‐coordinated by one pn molecule and four azido ligands with μ‐1 and μ‐1,1,3 coordination modes. Thermogravimetric investigations with a heating rate of 10 K · min^–1 under nitrogen showed one main exothermic stage with a peak temperature of 215.7 °C in the DSC curve. The non‐isothermal kinetics parameters were calculated by Kissinger and Ozawa methods, respectively. The heat of combustion was measured by oxygen bomb calorimetry, and the enthalpy of formation, the critical temperature of thermal explosion, the entropy of activation (ΔS^≠), the enthalpy of activation (ΔH^≠), and the free energy of activation (ΔG^≠) were calculated. The measurements showed that 1 has very high impact, friction, and flame sensitivities.     

Transesterification Kinetics Investigation of R‐Substituted Phenyl Benzoates with 4‐Methoxyphenol in the Presence of K2CO3 in DMF

Transesterification of R‐substituted phenyl benzoates 1–5 with 4‐methoxyphenol 6 was kinetically investigated in the presence of K₂CO₃ in dimethylformamide (DMF) at various temperatures. The Hammett plots for the reactions of the 1–5 demonstrate good linear correlations with σ⁰ constants. Low magnitude of ρ_LG values indicate that the leaving group departure occurs after the rate‐determining step. The Brønsted coefficient values for the reactions (?0.2, ?0.16, ?0.13 at 15, 24, 36°C, respectively) demonstrate the weak effect of leaving group substituent on the reactivity of R‐substituted phenyl benzoates 1–5 for the reactions with 4‐methoxyphenol 6 in the presence of K₂CO₃ in DMF. The leaving group substituent effect on free energy (ΔG^≠), enthalpy (ΔH^≠), and entropy (ΔS^≠) of activation was examined. It was shown that the activation parameters obtained depend weakly on the leaving group substituent effect. The reaction is entropy controlled in case the leaving group substituent becomes electron withdrawing.