Mechanistic Studies on the Gas‐Phase Dehydrogenation of Alkanes at Cyclometalated Platinum Complexes

In the ion/molecule reactions of the cyclometalated platinum complexes [Pt(L? H)]⁺ (L=2,2′‐bipyridine (bipy), 2‐phenylpyridine (phpy), and 7,8‐benzoquinoline (bq)) with linear and branched alkanes C_nH_2n+2 (n=2–4), the main reaction channels correspond to the eliminations of dihydrogen and the respective alkenes in varying ratios. For all three couples [Pt(L? H)]⁺/C₂H₆, loss of C₂H₄ dominates clearly over H₂ elimination; however, the mechanisms significantly differs for the reactions of the “rollover”‐cyclometalated bipy complex and the classically cyclometalated phpy and bq complexes. While double hydrogen‐atom transfer from C₂H₆ to [Pt(bipy? H)]⁺, followed by ring rotation, gives rise to the formation of [Pt(H)(bipy)]⁺, for the phpy and bq complexes [Pt(L? H)]⁺, the cyclometalated motif is conserved; rather, according to DFT calculations, formation of [Pt(L? H)(H₂)]⁺ as the ionic product accounts for C₂H₄ liberation. In the latter process, [Pt(L? H)(H₂)(C₂H₄)]⁺ (that carries H₂ trans to the nitrogen atom of the heterocyclic ligand) serves, according to DFT calculation, as a precursor from which, due to the electronic peculiarities of the cyclometalated ligand, C₂H₄ rather than H₂ is ejected. For both product‐ion types, [Pt(H)(bipy)]⁺ and [Pt(L? H)(H₂)]⁺ (L=phpy, bq), H₂ loss to close a catalytic dehydrogenation cycle is feasible. In the reactions of [Pt(bipy? H)]⁺ with the higher alkanes C_nH_2n+2 (n=3, 4), H₂ elimination dominates over alkene formation; most probably, this observation is a consequence of the generation of allyl complexes, such as [Pt(C₃H₅)(bipy)]⁺. In the reactions of [Pt(L? H)]⁺ (L=phpy, bq) with propane and n‐butane, the losses of the alkenes and dihydrogen are of comparable intensities. While in the reactions of “rollover”‐cyclometalated [Pt(bipy? H)]⁺ with C_nH_2n+2 (n=2–4) less than 15 % of the generated product ions are formed by C? C bond‐cleavage processes, this value is about 60 % for the reaction with neo‐pentane. The result that C? C bond cleavage gains in importance for this substrate is a consequence of the fact that 1,2‐elimination of two hydrogen atoms is no option; this observation may suggest that in the reactions with the smaller alkanes, 1,1‐ and 1,3‐elimination pathways are only of minor importance.     

Characterization of synthetic and commercial trisiloxane surfactant materials

The organosilicone surfactant Silwet L‐77^® (L‐77), used as an agrochemical adjuvant, is a mixture comprised predominantly of [(CH₃)₃SiO]₂? (CH₃)Si? (CH₂)₃? (OCH₂CH₂)_n? OCH₃ oligomers (n = 3–16, average n ≈ 7.5). The commercially available L‐77 mixture was purified by reversed‐phase high‐performance liquid chromatography (HPLC) to obtain individual trisiloxane surfactant components. Pure oligomers (n = 3, 6 and 9) were also synthesized. Synthesis was achieved by hydrosilylation of monomeric ethoxylate monomethyl ether starting reagents. Pure hexa‐ and nona‐ethylene glycols were produced by condensation of smaller oligomers. Atmospheric‐pressure ionization mass spectrometry (MS) methods were used to characterize fully the commercial L‐77 product and synthesized or isolated components. The application of Fourier‐transform ion cyclotron resonance MS and online HPLC–electrospray ionization MS techniques to the analysis of this surfactant are described here. The application of these analytical techniques also enabled elucidation of the synthetic by‐products present in the commercial formulation. In addition, physico‐chemical properties specific to agrochemical uses, such as droplet spread areas on plant foliage and surface tension for the different oligomer solutions, are also reported. Copyright © 2004 John Wiley & Sons, Ltd.     

Light‐Induced Rearrangement of Thioether‐Substituted Phosphanide Ligands: Scope and Limitations of a Remarkable Isomerization

Treatment of the thioether‐substituted secondary phosphanes R²PH(C₆H₄‐2‐SR¹) [R²=(Me₃Si)₂CH, R¹=Me ( 1_PH ), iPr ( 2_PH ), Ph ( 3_PH ); R²=tBu, R¹=Me ( 4_PH ); R²=Ph, R¹=Me ( 5_PH )] with nBuLi yields the corresponding lithium phosphanides, which were isolated as their THF ( 1 – 5_Pa ) and tmeda ( 1 – 5_Pb ) adducts. Solid‐state structures were obtained for the adducts [R²P(C₆H₄‐2‐SR¹)]Li(L)_n [R²=(Me₃Si)₂CH, R¹=nPr, (L)_n=tmeda ( 2_Pb ); R²=(Me₃Si)₂CH, R¹=Ph, (L)_n=tmeda ( 3_Pb ); R²=Ph, R¹=Me, (L)_n=(THF)_1.33 ( 5_Pa ); R²=Ph, R¹=Me, (L)_n=([12]crown‐4)₂ ( 5_Pc )]. Treatment of 1_PH with either PhCH₂Na or PhCH₂K yields the heavier alkali metal complexes [{(Me₃Si)₂CH}P(C₆H₄‐2‐SMe)]M(THF)_n [M=Na ( 1_Pd ), K ( 1_Pe )]. With the exception of 2_Pa and 2_Pb , photolysis of these complexes with white light proceeds rapidly to give the thiolate species [R²P(R¹)(C₆H₄‐2‐S)]M(L)_n [M=Li, L=THF ( 1_Sa , 3_Sa – 5_Sa ); M=Li, L=tmeda ( 1_Sb , 3_Sb – 5_Sb ); M=Na, L=THF ( 1_Sd ); M=K, L=THF ( 1_Se )] as the sole products. The compounds 3_Sa and 4_Sa may be desolvated to give the cyclic oligomers [[{(Me₃Si)₂CH}P(Ph)(C₆H₄‐2‐S)]Li]₆ (( 3_S )₆) and [[tBuP(Me)(C₆H₄‐2‐S)]Li]₈ (( 4_S )₈), respectively. A mechanistic study reveals that the phosphanide–thiolate rearrangement proceeds by intramolecular nucleophilic attack of the phosphanide center at the carbon atom of the substituent at sulfur. For 2_Pa / 2_Pb , competing intramolecular β‐deprotonation of the n‐propyl substituent results in the elimination of propene and the formation of the phosphanide–thiolate dianion [{(Me₃Si)₂CH}P(C₆H₄‐2‐S)]^2?.     

Mixed‐Ligand Complexes of Copper(II) with α‐Hydroxycarboxylic Acids and 1,10‐Phenanthroline

Eight new two‐ligand complexes of copper(II) with 1,10‐phenanthroline and one of four different α‐hydroxy‐carboxylic acids (glycolic, lactic, mandelic and benzylic) were prepared. The complexes of general formula [Cu(HL)₂(phen)] · nH₂O (HL = monodeprotonated acid) ( 1 – 4 ) were characterized by elemental analysis, IR, electronic and EPR spectroscopy, magnetic measurements and thermo‐gravimetric analysis. The complexes of general formulae [Cu(HL)(phen)₂](HL) · H₂L · nSolv [ 1 a (HL = HGLYO^–, n = 1, Solv = MeCN) and 3 a (HL = HMANO^–, n = 0)] and [Cu(L)(phen)(OH₂)] · nH₂O [ 2 a (L = LACO^2–, n = 4) and 4 a (L = BENO^2–, n = 2)] were characterized by X‐ray diffractometry. In all these latter a pentacoordinated copper atom has a basically square pyramidal coordination polyhedron, the distortion of which towards a trigonal bipyramidal configuration has been evaluated in terms of the parameter τ. In 1 a and 3 a there are three forms of α‐hydroxycarboxylic acid: a monodentate monoanion, a monoanionic counterion, and a neutral molecule lying in the outer coordination sphere; in 2 a and 4 a the α‐hydroxycarboxylic acid is a bidentate dianion coordinating through carboxyl and hydroxyl oxygens.     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

Hydrothermal Synthesis,Crystal Structures,and Catalytic Properties of Three Coordination Polymers Containing ­Flexible Bis(benzimidazole) and Dicarboxylate Ligands

Three metal‐organic coordination polymers, namely {[Cd(L1)(1,2‐chdc)] · 2H₂O}_n ( 1 ), {[Ni(L2)(1,2‐chdc)] · H₂O}_n ( 2 ), and [Cd(L2)(npht)]_n ( 3 ) [L1 = 1,2‐bis(2‐methylbenzimidazol‐1‐ylmethyl)benzene, L2 = 1,2‐bis(5,6‐dimethylbenzimidazol‐1‐ylmethyl)benzene, 1,2‐H₂chdc = 1,2‐cyclohexanedicarboxylic acid, H₂npht = 3‐nitrophthalic acid] were synthesized under hydrothermal conditions and structurally characterized by single‐crystal X‐ray diffraction methods, IR spectroscopy, TGA, and elemental analysis. In compound 1 , two 1,2‐chdc^2– ligands connect two neighboring Cd atoms to form a dinuclear [Cd₂(1,2‐chdc)₂] subunit, which is further linked by L1 ligands to construct a 1D ladder‐like chain. Compound 2 exhibits a 2D (4,4) coordination network with {4⁴.6²} topology, whilst compound 3 shows a 1D helical chain structure. The fluorescence, UV/Vis diffuse reflection spectra, and catalytic properties of complexes 1 – 3 for the degradation of the congo red azo dye in a Fenton‐like process are investigated.     

Synthesis of silylene-vinylene oligomers via catalytic polycondensation of divinyldimethylsilane

Acyclic diene polymerization (ADP) of divinyldimethylsilane in the presence of ruthenium RuCl₂(PPh₃)₃ and rhodium [RhCl(cod)]₂ catalysts led predominantly to linear silylene-vinylene oligomers (M_n = 1510 and M_w/M_n = 1.19) if the ruthenium catalyst was used or to mixture of cyclic and linear oligomers if rhodium complex was catalyst. © 1996 John Wiley & Sons, Inc.     

Oligomeric Alkoxysilanes with Cagelike Hybrids as Cores: Designed Precursors of Nanohybrid Materials

Well‐defined alkoxysilane oligomers containing a cagelike carbosiloxane core were synthesized and used as novel building blocks for the formation of siloxane‐based hybrid networks. These oligomers were synthesized from the cagelike trimer derived from bis(triethoxysilyl)methane by silylation with mono‐, di‐, and triethoxychlorosilanes ((EtO)_nMe_3?nSiCl, n=1, 2, and 3). Hybrid xerogels were prepared by hydrolysis and polycondensation of these oligomers under acidic conditions. The structures of the products varied depending on the number of alkoxy groups (n). When n=2 and 3, microporous xerogels (BET surface areas of 820 and 510 m² g^?1, respectively) were obtained, whereas a nonporous xerogel was obtained when n=1. ²⁹Si NMR spectroscopic analysis suggested that partial rearrangement of the siloxane networks, which accompanied the cleavage of the Si–O–Si linkages, occurred during the polycondensation processes. By using an amphiphilic triblock copolymer surfactant as a structure‐directing agent, hybrid thin films with a 2D hexagonal mesostructure were obtained when n=2 and 3. These results provide important insight into the rational synthesis of molecularly designed hybrid materials by sol–gel chemistry.     

Coordination Frameworks based on 3,5‐Bis(imidazole‐1‐yl)­pyridine and Aromatic Dicarboxylate Ligands: Synthesis,Crystal Structures,and Photoluminescent Properties

Three metal coordination polymers [Zn(bdc)(L)(H₂O)]_n ( 1 ), [Co(pta)(L)(H₂O)₂]_n ( 2 ), and [Cd(tda)(L)(H₂O)]_n ( 3 ) [H₂bdc = 1,2‐benzene dicarboxylate acid, H₂pta = terephthalic acid, H₂tda = 2,5‐thiophenedicarboxylic acid, L = 3,5‐bis(imidazole‐1‐yl)pyridine] were synthesized and structurally characterized by IR spectroscopy, elemental analysis, X‐ray powder diffraction, and X‐ray single crystal diffraction. Complex 1 shows a three‐dimensional (3D) structure with cco topology with the symbol 6⁵ · 8, whereas complex 2 features a 3D structure with cds topology with the symbol 6⁵ · 8. Complex 3 has a 2D network constructed by the cadmium atoms bridged through the ligands tda and L. Their X‐ray powder diffraction patterns were compared with the simulated ones. Moreover, their luminescent properties were investigated in the solid state at room temperature, and the thermogravimetric analyses were carried out to study the thermal stability of the 3D networks.     

Concurrent two one‐electron transfer in the oxidation of chromium(III) complexes with trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetate and diethylenetriaminepentaacetate ligands by periodate ion

The kinetics of oxidation of [Cr^IIIcdta(H₂O)]^? and [Cr^IIIdtpa(H₂O)]^2? (where cdta = trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetate and dtpa = diethylenetriaminepentaacetate) by periodate ion has been studied in aqueous solutions. The oxidation of these complexes was carried out in the pH range 5.52–7.44 for the [Cr^IIIcdta(H₂O)]^? complex and the pH range 5.56–8.56 for the [Cr^IIIdtpa(H₂O)]^2? complex. The reaction exhibited an uncommon second‐order dependence on [Cr^IIIL(H₂O)]ⁿ (L = cdta or dtpa and n=?1 or ?2, respectively) and a first‐order dependence on [IO^?₄]. At fixed reaction conditions, the reaction rate is described by Eq. (i). The third‐order rate constant, k₃, varied with [H⁺] according to Eq. (ii). (i) (ii) A mechanism in which simultaneous one‐electron transfer from two [Cr^IIIL(OH)]^n?1 ions to I(VII) is proposed. The two [Cr^IIIL(OH)]^n?1 ions are bridged to I(VII) via the hydroxo group. Periodate ion is known to undergo rapid substitution or expansion of its coordination number from four to six. The activation parameters ΔH* and ΔS* were calculated using the Eyring equation. The relatively high negative values of ΔS* are consistent with an associative process preceding electron transfer. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 729–735, 2012     

Synthesis and Self‐Assembly of NCN‐Pincer Pd‐Complex‐Bound Norvalines

The NCN‐pincer Pd‐complex‐bound norvalines Boc‐D /L ‐[PdCl(dpb)]Nva‐OMe ( 1 ) were synthesized in multigram quantities. The molecular structure and absolute configuration of 1 were unequivocally determined by single‐crystal X‐ray structure analysis. The robustness of 1 under acidic/basic conditions provides a wide range of N‐/C‐terminus convertibility based on the related synthetic transformations. Installation of a variety of functional groups into the N‐/C‐terminus of 1 was readily carried out through N‐Boc‐ or C‐methyl ester deprotection and subsequent condensations with carboxylic acids, R¹COOH, or amines, R²NH₂, to give the corresponding N‐/C‐functionalized norvalines R¹‐D /L ‐[PdCl(dpb)]Nva‐R² 2 – 9 . The dipeptide bearing two Pd units 10 was successfully synthesized through the condensation of C‐free 1 with N‐free 1 . The robustness of these Pd‐bound norvalines was adequately demonstrated by the preservation of the optical purity and Pd unit during the synthetic transformations. The lipophilic Pd‐bound norvalines L ‐ 2 , Boc‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, and L ‐ 4 , n‐C₄H₉CO‐L ‐[PdCl(dpb)]Nva‐NH‐n‐C₁₁H₂₃, self‐assembled in aromatic solvents to afford supramolecular gels. The assembled structures in a thermodynamically stable single crystal of L ‐ 2 and kinetically stable supramolecular aggregates of L ‐ 2 were precisely elucidated by cryo‐TEM, WAX, SAXS, UV/Vis, IR analyses, and single‐crystal X‐ray crystallography. An antiparallel β‐sheet‐type aggregate consisting of an infinite one‐dimensional hydrogen‐bonding network of amide groups and π‐stacking of PdCl(dpb) moieties was observed in the supramolecular gel fiber of L ‐ 2 , even though discrete dimers are assembled through hydrogen bonding in the thermodynamically stable single crystal of L ‐ 2 . The disparate DSC profiles of the single crystal and xerogel of L ‐ 2 indicate different thermodynamics of the molecular assembly process.     

Mössbauer and electric conductivity studies of bidentate base adducts of acetylacetonatoiron(II)

Summary Bidentate bridging base polymer complexes of acetylacetonatoiron(II) [Fe(acac)₂L]_n, where L=pyrazine(pyz), 4,4-bipyridine(bpy),trans-1,2-bis(4-pyridyl)ethylene(bpe), 1,2-bis(4-pyridyl)ethane(bpa) and 4,4-trimethylene bipyridine(tmbpy), have been prepared, characterized and oxidized by iodine to give a range of iron(III) and iron(II) complexes [Fe(acac)₂L · I_x]_n] in which the Fe^III/Fe^II ratios were established by Mössbauer spectroscopy. The electric conductivities of compressed pellets of the polysalts were obtained. The conductivities and Mössbauer parameters (I.S. and Q.S.) both change with respect to the kind of bidentate bridging bases.The conjugation of bridged ligand markedly affects the conductivity of the complexes.     

Syntheses and structural characterization of New Tl + and K + complexes of 3,5-dinitrobenzoic acid (HDNB), [Tl(μ-DNB)] n and [K(μ-DNB)(μ-HDNB)] n

Two new Tl⁺ and K⁺ complexes of 3,5-dinitrobenzoic acid (HDNB), [Tl(μ-DNB)] _n and [K(μ-DNB)(μ-HDNB)] _n have been synthesized and characterized by elemental analysis, IR, ¹H NMR and ¹³C NMR spectroscopy. Determination of the structure of the [K(μ-DNB)(μ-HDNB)] _n and [Tl(μ-DNB)] _n by X-ray crystallography shows that there are nine coordinate K atoms (KO₉) and eight coordinate Tl atoms (TlO₈). The [Tl(μ-DNB)] _n and [K(μ-DNB)(μ-HDNB)] _n complexes are 2D and 3D coordination polymers, respectively.     

Synthesis,Structures, and Luminescent Properties of Three Coordination Polymers Constructed from Tricarboxylate and Bisbenzoimidazole Ligand

The hydrothermal reaction of the tricarboxylate ligand 5‐(carboxymethoxy)isophthalic acid (H₃L) with Zn^II, Cd^II, and Sn^II salts in the presence of the bisbenzoimidazole coligand 1, 3‐bis(benzimidazol‐2‐yl)‐2‐oxapropane (bbop) afforded the coordination polymers, [Zn(HL)(bbop)]_n ( 1 ), [Cd(HL)(bbop)]_n ( 2 ), and {[H₂(bbop)][Sn₂L₂]}_n ( 3 ). The complexes were characterized by elemental analyses, IR spectroscopy, single‐crystal X‐ray diffraction analyses, thermogravimetric analyses, and fluorescence properties. The structures of complexes 1 and 2 are constructed by 1D chains and show strong blue luminescence emission. The structure of complex 3 is a 2D anionic dilayer, and shows a vase‐like porous structure occupied by the bulky [H₂(bbop)]²⁺ cation, which is an uncommon structural feature in transition metal coordination polymers. The three complexes are further connected by hydrogen bonds to form 3D supramolecular architectures.     

Assembled synthesis of luminescent mono/double‐layered 2D and 3D Zn (II)‐based coordination polymers tuned by flexible bis (pyridyl)propane‐1,2‐diamines and diverse organic dicarboxylates

Six mono/double‐layered 2D and three 3D coordination polymers were synthesized by a self‐assembly reaction of Zn (II) salts, organic dicarboxylic acids and L1/L2 ligands. These polymeric formulas are named as [Zn(L1)(C₄H₂O₄)_0.5 (H₂O)]_n·0.5n(C₄H₂O₄)·2nH₂O ( 1 ), [Zn₂(L2)(C₄H₂O₄)₂]_n·2nH₂O ( 2 ), [Zn(L1)(m‐BDC)]_n ( 3 ), [Zn₂(L2)(m‐BDC)₂]_n·2nH₂O ( 4 ), [Zn₃(L1)₂(p‐BDC)₃(H₂O)₄]_n·2nH₂O ( 5 ), [Zn₂(OH)(L2) (p‐BDC)_1.5]_n ( 6 ), [Zn₂(L1)(p‐BDC)₂]_n·5nH₂O ( 7 ), [Zn₂(L2)(p‐BDC)₂]_n·3nH₂O ( 8 ) and [Zn₂(L1)(C₄H₄O₄)_1.5(H₂O)]_n·n(ClO₄)·nH₂O ( 9 ) [L1 = N,N′‐bis (pyridin‐4‐ylmethyl)propane‐1,2‐diamine, L2 = N,N′‐bis (pyridin‐3‐ylmethyl)propane‐1,2‐ diamine, m‐BDC^2? = m‐benzene dicarboxylate, p‐BDC^2? = p‐benzene dicarboxylate]. Meanwhile, these polymers have been characterized by elemental analysis, infrared, thermogravimetry (TG), photoluminescence, powder and single‐crystal X‐ray diffraction. Polymers 1–6 present mono‐ and double (4,4)‐layer motifs accomplished by L1/L2 ligands with diverse conformations and organic dicarboxylates, and the layer thickness locates in the range of 5.8–15.0 Å. In three 3D polymers, the L1 and L2 molecules adopt the same cis‐conformations and join adjacent Zn (II) cations together with p‐BDC^2? or succinate, giving rise to different binodal (4,4)‐c nets with (4.5².8³)(4.5³.7²) ( 7 ), pts ( 8 ) topology and twofold interpenetrated binodal (5,5)‐c nets with (3².4⁴.5².6²)(3.4³.5².6⁴) ( 9 ). Therefore, the diverse conformations of the two bis (pyridyl)‐propane‐1,2‐diamines and the feature of different organic dicarboxylate can effectively influence the architectures of these polymers. Powder X‐ray diffraction patterns demonstrate that these bulk solid polymers are pure phase. TG analyses indicate that these polymers have certain thermal stability. Luminescent investigation reveals that the emission maximum of these polymers varies from 402 to 449 nm in the solid state at room temperature. Moreover, 1 , 3 and 5–8 show average luminescence lifetimes from 8.81 to 16.30 ns.     

Syntheses,Structures, and Catalytic Properties of Three Copper(II) Coordination Polymers Based on 2,3,5,6‐Tetrafluoro‐1,4‐bis(triazole‐ylmethyl)benzene and Benzene Carboxylate Ligands

Three new mixed‐ligand coordination polymers of Cu^II, namely, [Cu(Fbtx)(L1)(H₂O)]_n ( 1 ), [Cu(Fbtx)_0.5(HL2)(H₂O)₂]_n ( 2 ), and {[Cu(Fbtx)_1.5(HL3)(H₂O)] · H₂O}_n ( 3 ) [Fbtx = 2,3,5,6‐tetrafluoro‐1,4‐bis(1,2,4‐triazole‐1‐ylmethyl)benenze, H₂L1 = terephthalic acid, H₃L2 = trimesic acid, NaH₂L3 = 5‐sulfoisophthalic acid monosodium salt], were hydrothermally synthesized and structurally characterized by elemental analysis, IR spectra, and single‐crystal and powder X‐ray diffraction techniques. All the complexes have a two‐dimensional (2D) coordination layer structure. Of these, 1 displays a planar 4⁴‐ sql structure whereas both 2 and 3 are highly undulated 6³‐ hcb nets. Moreover, their thermal stability and catalytic behaviors in the aerobic oxidation of 4‐methoxybenzyl alcohol were also investigated as well. The results indicate that the benzene dicarboxylate ligands have an effective influence on the structures and catalytic properties of the resulting coordination polymers.     

Hydrothermal Synthesis of Five New Coordination Polymers Based on Benzophenone‐2, 4′‐dicarboxylic Acid and N‐Donor Spacers

Five new coordination polymers, namely, [Ni₂(L)₂(4, 4′‐bipy)₃)] · H₂O]_n ( 1 ), [Ni₂(L)₂(O) (bpp)₂]_n ( 2 ), [Zn(L)(bib)_0.5]_n ( 3 ), [Zn(L)(PyBIm)]_n ( 4 ), and [Zn₃(L)₂(OH)(im)]_n ( 5 ) [H₂L = benzophenone‐2, 4′‐dicarboxylic acid, 4, 4′‐bipy = 4, 4′‐bipyridine, bpp = 1, 3‐bis(4‐pyridyl)propane, PyBIm = 2‐(4‐pyridyl)benzimidazole, and im = imidazole] were synthesized under hydrothermal conditions. Structure determination revealed that compound 1 is a 3D network and exhibits a 4‐connected metal‐organic framework with (4².6³.8) topology, whereas compounds 2 , 3 , 4 , and 5 are two‐dimensional layer structures. In compounds 2 – 4 , dinuclear metal clusters are formed through carboxylic groups. In compound 5 , trinuclear metal clusters are formed through μ₃‐OH and carboxylic groups. The carboxylic groups exhibit three coordination modes in compounds 1 – 5 : monodentately, bidentate‐chelating, and bis‐monodentately. Furthermore, the luminescent properties for compounds 3 , 4 , and 5 were investigated.     

Linking Tribridged Dicopper Complexes with Neutral Dipyridyl Compounds to Coordination Oligomers and Polymers

The stable tribridged dicopper(I) carboxylate complexes [Cu₂(μ‐dppm)₂(μ‐O₂CR)]BF₄ (RCO₂ ⁻ = formate (OFc⁻), m1 ; acetate (OAc⁻), m2 ; benzoate (OBAc⁻), m3 ; o‐toluate (O2TAc⁻), m4 ; p‐toluate (O4TAc⁻), m5 ; 4‐phenylbutyrate (O4PBAc⁻), m6 ; 2‐nitrobenzoate (O2NBAc⁻), m7 ), abbreviated as MM, and neutral dipyridyl compounds (NN; NN = 4,4′‐bipyridine (bpy), 1,2‐bis(4‐pyridyl)ethane (bpa), trans ‐1,2‐bis(4‐pyridyl)ethylene (bpe), 4,4′‐trimethylenedipyridine (tmp)) can form dynamic equilibria in CH₂Cl₂. From the equilibrium mixtures containing MM and NN with MM/NN = 1:1, nine 2:1 oligomers ([( m1 )₂(μ‐bpy)](BF₄)₂ ( o1a (BF₄)₂), [( m3 )₂(μ‐bpe)](BF₄)₂ ( o3c (BF₄)₂), [( m3 )₂(μ‐tmp)](BF₄)₂ ( o3d (BF₄)₂), [( m4 )₂(μ‐bpe)](BF₄)₂ ( o4c (BF₄)₂), [( m5 )₂(μ‐bpy)](BF₄)₂ ( o5a (BF₄)₂), [( m5 )₂(μ‐tmp)](BF₄)₂ ( o5d (BF₄)₂), [( m6 )₂(μ‐bpa)](BF₄)₂ ( o6b (BF₄)₂), [( m7 )₂(μ‐bpy)](BF₄)₂ ( o7a (BF₄)₂), [( m7 )₂(μ‐bpa)](BF₄)₂ ( o7b (BF₄)₂)), one 2:3 oligomer ([{( m2 )(bpy)}₂(μ‐bpy)](BF₄)₂ ( o2a (BF₄)₂)), and five 1:1 polymers ([( m2 )(μ‐bpe)] _n (BF₄ ) _n ( p2c (BF₄ ) _n ), [( m2 )(μ‐tmp)] _n (BF₄ ) _n ( p2d (BF₄ ) _n ), [( m3 )(μ‐bpy)] _n (BF₄ ) _n ( p3a (BF₄ ) _n ), [( m3 )(μ‐tmp)] _n (BF₄ ) _n ( p3d (BF₄ ) _n ), [( m7 )(μ‐tmp)] _n (BF₄ ) _n ( p7d (BF₄ ) _n )) were obtained as single crystals, and their structures were determined by X‐ray crystallography. Both experimental and theoretical results support the presence of two oligomeric species, [{Cu₂(μ‐dppm)₂(μ‐O₂CR)}₂(μ‐NN)]²⁺ and [{Cu₂(μ‐dppm)₂(μ‐O₂CR)(NN)}₂(μ‐NN)]²⁺), in dynamic equilibrium. The oligomers (such as o3d (BF₄)₂) can serve as seeds to induce the formation of soluble coordination polymers as crystals (such as p3d (BF₄)_n ).     

Electronic Spectra of Ruthenium Nitrosyl Complexes with Macrocyclic Ligands

Electronic spectra of ruthenium(II) nitrosyl complexes [Ru(NO)(salen)(X)]⁴ⁿ (X = Cl, H₂O; n = 0, 1) and [Ru(NO)(P)(ONO)] with tetradentate -conjugated ligands N,N'-ethylenebis(salicylideniminato) dianion (salen) and porphinate dianion (P) were calculated by the TD DFT and CINDO/CI methods. The data obtained were compared to the results of previous calculations of the spectra of trans-[Ru(NO)(NH₃)₄(L)]^{3 +} complexes with nitrogen-containing heterocyclic ligands L. It was found that charge-transfer transitions to * orbitals of the RuNO group dominate in the long-wave part of the spectrum irrespective of the other ligands.     

Production and isolation of ligated metal(IV)‐oxo ions by tandem mass spectrometry

High valent metal(IV)‐oxo species, [M(?O)(MeIm)_n(OAc)]⁺ (M = Mn–Ni, MeIm = 1‐methylimidazole, n = 1–2), which are relevant to biology and oxidative catalysis, were produced and isolated in gas‐phase reactions of the metal(II) precursor ions [M(MeIm)_n(OAc)]⁺ (M = Mn–Zn, n = 1–3) with ozone. The precursor ions [M(MeIm)(OAc)]⁺ and [M(MeIm)₂(OAc)]⁺ were generated via collision‐induced dissociation of the corresponding [M(MeIm)₃(OAc)]⁺ ion. The dependence of ozone reactivity on metal and coordination number is discussed. Copyright © 2010 John Wiley & Sons, Ltd.