Syntheses and radical polymerization behavior of novel optically active methacrylamides having (L)-leucine structure in the side chains

Syntheses and radical polymerizations of methacrylamides having (L)-leucine and N-methyl-(L)-leucine methyl ester structures in the side chains N-methacryloyl-(L)-leucine methyl ester (MA-L-M) and N-methyl-N-methacryloyl-(L)-leucine methyl ester (N-Me-MA-L-M) were carried out. The monomers were prepared by the reactions of methacryloyl chloride with the corresponding amino acid methyl esters. Radical polymerizations were carried out in the presence of appropriate initiators at 60°C and 120°C. MA-L-M afforded the corresponding polymer with M_ns 38,000 ∼ 372,000 in high yields, while N-Me-MA-L-M afforded a trace amount of polymer at 60°C and in a low yield even at 120°C. Both inversion and increase of absolute value of specific rotation were observed in the transformation from MA-L-M (+1.3°C) to poly(MA-L-M) (−35.7°C). Changes in the CD spectral pattern and the conformation of the leucine moiety were confirmed from the monomer to polymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2681–2690, 1998     

Chain‐growth condensation polymerization of 4‐aminobenzoic acid esters bearing tri(ethylene glycol) side chain with lithium amide base

Chain‐growth condensation polymerization of p‐aminobenzoic acid esters 1 bearing a tri(ethylene glycol) monomethyl ether side chain on the nitrogen atom was investigated by using lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) as a base. The methyl ester monomer 1a afforded polymer with low molecular weight and a broad molecular weight distribution, whereas the polymerization of the phenyl ester monomer 1b at ?20 °C yielded polymer with controlled molecular weight (M_n = 2800–13,400) and low polydispersity (M_w/M_n = 1.10–1.15). Block copolymerization of 1b and 4‐(octylamino)benzoic acid methyl ester ( 2 ) was further investigated. We found that block copolymer of poly 1b and poly 2 with defined molecular weight and low polydispersity was obtained when the polymerization of 1b was initiated with equimolar LiHMDS at ?20 °C and continued at ?50 °C, followed by addition of 2 and equimolar LiHMDS at ?10 °C. Spherical aggregates were formed when a solution of poly 1b in THF was dropped on a glass plate and dried at room temperature, although the block copolymer of poly 1b and poly 2 did not afford similar aggregates under the same conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1357–1363, 2010     

NOTE: Synthesis and Characterization of a Poly(acrylamide) with Pendant 1,4-piperazine-2,5-dione Moieties via Post-polymerization Cyclization

A poly(acrylamide) was synthesized from N ^α -Boc-N ^? -acrolyl-l-lysylglycine methyl ester via radical polymerization. This polymer typically had Mn ～ 100,000 g/mol, Mw ～ 300,000 g/mol, and a T_g of 93°C. Removal of Boc with TFA and cyclization with DABCO? in DMSO at 65°C afforded a soluble piperazinedione-containing polymer that had a T_g of 157°C and thermal stability up to 300°C. These results demonstrate a viable and efficient synthetic route to piperazinedione-containing polyacrylamides of high molecular weight. Related polymers that incorporate substituted indane moieties could be useful high T_g materials for fabrication of LC and NLO devices.     

Radical polymerization of 3-methylene-5,5′-dimethyl-2-pyrrolidinone: A cyclic analog of N-substituted methacrylamide

3-Methylene-5,5′-dimethyl-2-pyrrolidinone (α-MDMP), a cyclic analog of N-substituted methacrylamide, was synthesized and polymerized with α,α′-azobis (isobutyronitrile) (AIBN) in solution. Poly(α-MDMP) is only soluble in dimethyl sulfoxide (DMSO) at room temperature. Thermogravimetry of poly(α-MDMP) showed 10% weight loss at 355°C in air and 400°C under nitrogen, respectively. The kinetics of α-MDMP homopolymerization with AIBN was investigated in DMSO. The rate of polymerization (R_p) can be expressed by R_p = k[AIBN]^0.49[α-MDMP]^1.0 and the overall activation energy has been calculated to be 73.2 kJ/mol. Monomer reactivity ratios in copolymerization of α-MDMP (M₂) with methyl methacrylate (M₁) are r₁ = 0.71 and r₂ = 0.71, from which Q and e values of α-MDMP are calculated as 0.75 and -0.43, respectively. © 1993 John Wiley & Sons, Inc.     

Catalysis of enantiomeric ester hydrolysis in polymer domains: Catalytic effects of N-decanoyl-histidine and of dipeptide derivatives containing a histidyl residue

The catalytic activities of N-decanoyl-L -histidine and its methyl ester and of dipeptide derivatives containing an L -histidine residue toward the stereoselective hydrolysis of enantiomeric substrates have been studied at pH 7.30 (in 0.01M Bis-tris buffer) and 25°C in the presence of poly(ethyleneimine) derivatives. The dipeptide catalyst revealed greatest stereoselectivity in a quaternized poly(ethyleneimine) derivative. A comparison of catalytic effects on both the rate constants and stereoselectivities of N-decanoyl-L -histidine and its methyl ester elucidates the cooperative effects of carboxyl groups in the polymer domains. The structure of the substrates influenced both the rate constants and stereoselectivities in polymer domains.     

Synthesis and polymerization of optically active N-α-methylbenzylmaleimide

Optically active N-α-methylbenzylmaleimide (MBZMI) was prepared with maleic anhydride and d-(+)-α-methylbenzylamine. The polymerizations of MBZMI were carried out with α,α′-azobisisobutyronitrile (AIBN) and n-butyllithium (n-BuLi) in tetrahydrofuran (THF). The specific rotations of the polymers obtained by AIBN and n-BuLi initiator were +11.1° to +13.0° and ?57.0° to ?89.2°, respectively. The weight-average molecular weights (M_w) for the polymers were between 4200 and 8000. Furthermore, MBZMI was copolymerized with styrene (ST) and methyl methacrylate (MMA) with AIBN in THF at 50°C to obtain optically active copolymers. The monomer reactivity ratios of MBZMI (M₁) with ST (M₂) were obtained as r₁ = 0.027, r₂ = 0.094 in the MBZMI–ST and r₁ = 0.15, r₂ = 1.54 in the MBZMI–MMA system. The Q-e values for MBZMI were Q₁ = 0.78, e₁ = 1.62. All the polymers and copolymers were found to show a weakly negative circular dichroism (CD) peak at about 250 nm and a strongly positive CD peak at about 220 nm.     

Cobalt‐mediated radical polymerization routes to poly(vinyl ester) block copolymers

Cobalt‐mediated radical polymerizations (CMRPs) utilizing redox initiation are demonstrated to produce poly(vinyl ester) homopolymers derived from vinyl pivalate (VPv) and vinyl benzoate (VBz), and their block copolymers with vinyl acetate (VAc). Combining anhydrous Co(acac)₂, lauroyl peroxide, citric acid trisodium salt, and VPv at 30 °C results in controlled polymerizations that yield homopolymers with M_n = 2.5–27 kg/mol with M_w/M_n = 1.20–1.30. Homopolymerizations of scrupulously purified VBz proceed with lower levels of control as evidenced by broader polydispersities over a range of molecular weights (M_n = 4–16 kg/mol; M_w/M_n = 1.34–1.65), which may be interpreted in terms of the decreased nucleophilicity of these less electron donating propagating polymer chain ends. Based on these results, we demonstrate that sequential CMRP reactions present a viable route to microphase separated poly(vinyl ester) block copolymers as shown by small‐angle X‐ray scattering analyses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and reactions of cysteine‐based telechelic polymers

The radical polyaddition of N‐4‐vinylbenzoyl‐L ‐cysteine methyl ester (VCM) was carried out in the presence of 2,2′‐azobisisobutyronitrile (AIBN, 3 mol %) as an initiator in dimethyl formamide (DMF) with monomer concentrations of 0.5 and 1.0 M at 60 °C for 20 h under nitrogen atmosphere to afford the corresponding polymers [poly(VCM), PVCM] with number‐average molecular weights (M_n)'s of 5300 and 18,000 in 92 and 95% yields, respectively. The obtained polymers had a heterotelechelic structure with thiol and olefin end moieties. The radical polymerization of methyl methacrylate and trityl methacrylate was carried out in the presence of PVCM with AIBN (3 mol %) as an initiator in DMF at 60 °C for 20 h to afford the block copolymers with M_n values in the range of 13,000–26,800 in good yields. PVCM [M_n = 18,000; polydispersity (M_w/M_n) = 1.56] was treated with 4 equiv of NaOH aq. (1.0 M) to afford the polymer having carboxyl groups in the side chain with a M_n of 17,300 and M_w/M_n of 1.88 in 95% yield and was also oxidized to polysulfoxide and polysulfone with 4 equiv of H₂O₂ per sulfide unit in CH₂Cl₂ (1.0 M) for 20 h. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 23–31, 2001     

Synthesis and properties of poly(hydroxyurethane)s

Bis(cyclic Carbonate)s 1 were prepared by the reaction of bis(epoxide)s and atmospheric pressure of CO₂ in the presence of sodium iodide and triphenylphosphine as catalysts at 100°C in high yield. Polyaddition of 1 and hexamethylenediamine ( 2a ) or dodecamethylenediamine ( 2b ) in dimethylsulfoxide or N,N-dimethylacetamide (DMAc) at 70 or 100°C for 24 h afforded corresponding poly(hydroxyurethane)s with M?_n 20,000–30,000. When ethylenediamine ( 2c ) or 1,3-propanediamine ( 2d ) was used as a diamine, poly(hydroxyurethane)s with lower molecular weight were obtained. The presence of water, methanol, or ethyl acetate in the solvent had little effect on the M?_n of the polymer obtained, because of the high chemoselectivity of the reaction of the five-membered cyclic carbonate and amine. Polyaddition of bis(cyclic carbonate) bearing ester groups and 2a also afforded the corresponding poly(hydroxyurethane) without aminolysis of the ester groups. Poly(hydroxyurethane) 3 obtained from the bis(cyclic carbonate) derived from bisphenol A was less soluble in organic solvents than model polyurethane 8 having no hydroxy groups obtained from 4,4′-isopropylidenebis(2-hydroxyethoxybenzene) and hexamethylene diisocyanate, and was thermally stable as well as 8.3 easily undertook crosslinking at room temperature by the treatment with hexamethylene diisocyanate or aluminium triisopropoxide in DMAc or tetrahydrofuran. The gel crosslinked by aluminium triisopropoxide regenerated the original polymer at room temperature by treatment with 1.5 equiv of 1.2M HCl in N-methylpyrollidinone for 1 h. © 1993 John Wiley & Sons, Inc.     

Polymerization of α-methylene-N-methylpyrrolidone

α-Methylene-N-methylpyrrolidone (α-MMP) was synthesized and homopolymerized by bulk and solution methods. The poly(α-MMP) is readily soluble in water, methanol, methylene chloride, and dipolar aprotic solvents at room temperature. Thermogravimetric analysis of poly(α-MMP) showed a 10% weight loss at 330°C in air. The kinetics of α-MMP homopolymerization and copolymerization were investigated in acetonitrile, using azobisisobutyronitrile (AIBN) as an initiator. The rate of polymerization R_p could be expresed by R_p = k[AIBN]^0.49[α-MMP]^1.3. The overall activation energy was calculated to be 84.1 kj/mol. The relative reactivity ratios of α-MMP (M₂) copolymerization with methyl methacrylate (r₁ = 0.59, r₂ = 0.26) in acetonitrile were obtained. Applying the Q-e scheme led to Q = 2.18 and e = 1.77. These Q and e values are larger than those for acrylamide derivatives.     

Synthesis and functionalities of poly(N‐vinylalkylamide). XII. Synthesis and thermosensitive property of poly(vinylamine) copolymer prepared from poly(N‐vinylformamide‐co‐N‐vinylisobutyramide)

The differences in the polymerization abilities of N‐vinylformamide (NVF) and N‐vinylisobutyramide (NVIBA) and the synthesis of their copolymers were studied. The polymerization abilities were fairly good and quite similar to those of N‐vinyl‐ acetamide (NVA), a monomer in the same class as N‐vinylalkylamides. Since the monomer reactivity ratios were r₁ = 1.08 and r₂ = 0.92 (M₁ = NVF, M₂ = NVIBA), respectively, it is clear that the comonomers definitely were converted to random copolymers. The resulting copolymers poly(NVF‐co‐NVIBA) exhibited the cloud points sharply. The light transmittance profiles were the same as those for poly(NVIBA) although they increased from 39 °C for poly(NVIBA), with an increase in the corresponding hydrophilic NVF component. Our final objective was to produce a cloud point controlled polymer material with primary amino groups. To achieve this, we examined the hydrolysis of poly(NVF), poly(NVA), poly(NVIBA), and poly(NVF‐co‐NVIBA) to obtain poly(vinylamine) [poly(VAm)]. The hydrolytic cleavage of poly(NVF) and poly(NVA) was promoted by an increase in temperature. However, poly(NVIBA) was not cleaved appreciably. The hydrolysis of poly(NVF‐co‐NVIBA) was done under controlled conditions, and amino groups selectively were introduced to only one of two components of the copolymer. The cloud point of the hydrolyzed copolymer shifted to a higher temperature than that of the copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3674–3681, 2000     

Cope elimination and complexation of poly(dimethylaminoethyl methacrylate N-oxide)

Poly(dimethylaminoethyl methacrylate N-oxide) (poly(DMAEMNO)) was prepared by oxidation of poly(dimethylaminoethyl methacrylate) with hydrogen peroxide in methanol. From thermogravimetric and IR spectroscopic investigations Cope elimination of amine oxide group in poly(DMAENO) was found to occur at 120–150°C. The postpolymerization of partially pyrolyzed polymer carrying vinyl ester group as pendant was performed with azobisisobutyronitrile at 60°C in methanol to give cross-linked polymer that was found to form hydrogel. Poly(DMAEMNO) gave metal–polymer complexes with CuCl₂, ZnCl₂, and CoCl₂. Cobalt–polymer complex had a constitution of 1:2 of metal ion to amine oxide group, while copper– and zinc–polymer complexes seemed to have structures of 1:1 and 1:2 of metal ion to amine oxide group. Furthermore, polymer complexes of poly(DMAEMNO) with poly(methacrylic acid) and poly(acrylic acid) were found to be formed by mixing aqueous solutions of both polymers and also by radical polymerization of the acid monomers in the presence of poly(DMAEMNO). From elemental analysis, thermogravimetric investigation, and measurement of turbidity it was concluded that the resulting polymer–polymer complexes contained more than one acid monomer unit per one N-oxide unit.     

Radical-initiated homo- and copolymerizations of methacryloyl fluoride

The kinetics of methacryloyl fluoride (MAF) homopolymerization was investigated in methyl ethyl ketone (MEK) with azobis(isobutyronitrile) as initiator. The rate of polymerization (R_p) followed the expression R_p = k[AIBN]^0.55[MAF]^1.18. The overall activation energy was calculated as 74.4 kJ/mol. The relative reactivity ratios of MAF(M₂) copolymerization with styrene (r₁ = 0.083, r₂ = 0.14), and methyl methacrylate (r₁ = 0.48, r₂ = 0.81) in methyl ethyl ketone were obtained. Application of the Q–e scheme (in styrene copolymerization) led to Q = 2.22 and e = 1.31. The glass transition temperature (T_g) of poly(MAF) was 90°C by thermomechanical analysis. Thermogravimetry of poly(MAF) showed a 10% weight loss of 228°C in air.     

Radical polymerization of 4-methylene-4H-1,3-benzodioxin-2-ones: Cyclic α-substituted styrenes

4-Methylene-4H-1,3-benzodioxin-2-one (MBDOON), an α-substituted cyclic styrene derivative, was synthesized and polymerized readily with 2,2′-azobis(isobutyronitrile) (AIBN) as an initiator in solution. The kinetics of the MBDOON homopolymerization with AIBN was investigated in N-methyl-2-pyrrolidone (NMP). The rate of polymerization, R_p, can be expressed by R_p ? k[AIBN]^0.52[MBDOON]^1.1 and the overall activation energy has been calcualted to be 75.7 kJ/mol. Monomer reactivity ratios in copolymerization of MBDOON (M₂) with styrene (M₁) are r₁ = 0.31 and r₂ = 3.20, from which Q and e values of MBDOON can be calculated as 3.0 and ?0.7, respectively. Ring-substituted MBDOON monomers such as 6-chloro, 6-methyl, and 7-methoxy derivatives were synthesized and polymerized with AIBN. The 6-substituted MBDOON's readily underwent radical polymerization while the 7-methoxy-MBDOON was slower to polymerize. Poly(MBDOON) is predominantly heterotactic. (rr = 35, mr = 46, and mm = 19%). The polymer releases carbon dioxide at about 200°C and is converted with some depolymerization to poly[(o-hydroxyphenyl)acetylene]. The thermolysis temperature is very much affected by the ring substituent. The onset of carbon dioxide liberation was observed at 140°C in the case of the 7-methoxyl derivative while the 6-substituents had a smaller effect on the decarboxylation temperature. © 1993 John Wiley & Sons, Inc.     

Synthesis and Polymerization of Optically Active Mono-I-Menthyl Itaconate

Optically active mono-l-menthyl itaconate (MMI) was prepared from ita-conic acid and l-menthol. MMI was polymerized in bulk at 80°C to give a chiral homopolymer having -49.5° specific rotation. MMI (M₁ was copolymerized with styrene (ST, M₂), methyl methacrylate (MMA, M₂), and N-cyclohexylmaleimide (CHMI, M₂) by using 2,2′-azobisisobutyronitrile (AIBN) as the radical initiator and benzene as the polymerization solvent at 50°C. The monomer reactivity ratios (r₁, r₂) and Alfrey-Price Q, e values were determined to be r₁ = 0.28, r₂ = 0.32, Q₁ = 0.90, and e₁ = 0.75 in MMI-ST; r₁ = 0.09 and r₂ = 0.51 in MMI-MMA; and r₁ = 0.78 and r₂ = 0.39 in MMI-CHMI. The chiroptical properties of the polymers were investigated.     

Configurations conducive to the formation of intramolecular excimers in poly(N‐vinyl carbazole) and its copolymers

The ratios of the intensity of excimer and monomer emissions, denoted I_E/I_M, in poly(N‐vinyl carbazole) and copolymers of N‐vinyl carbazole and methyl methacrylate were measured with steady‐state fluorescence. Measurements were performed in dilute solutions of several fluid solvents at 25 °C and in a solid matrix of poly(methyl methacrylate) at room temperature. The values of I_E/I_M depended on the nature of the solvent, the emission wavelength, and the copolymer composition. Molecular dynamics simulations were performed for diastereoisomers of 2,4‐di(N‐carbazolyl)pentane and for isotactic and syndiotactic trichromophoric copolymer fragments to assist in the identification of the thermally accessible conformations capable of forming intramolecular excimers and the configurational relationship of the carbazole units in these complexes. Nearest neighbor carbazole groups made the dominant contribution to the excimers. Excimers were more likely in isotactic sequences than in syndiotactic sequences, as was also the case for the low‐energy excimer arising from the complete overlap of two carbazole units. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1272–1281, 2001     

Synthesis and polymerization of N‐(4‐tetrahydropyranyl‐oxyphenyl)maleimide

N‐(4‐Tetrahydropyranyl‐oxy‐phenyl)maleimide (THPMI) was prepared and polymerized by radical or anionic initiators. THPMI could be polymerized by 2,2′‐azobis(isobutyronitrile) (AIBN) and potassium tert‐butoxide. Radical polymers (poly(THPMI)r) were obtained in 15–50% yields for AIBN in THF at 65°C after 2–5 h. The yield of anionic polymers (poly(THPMI)a) obtained from potassium tert‐butoxide in THF at 0°C after 20 h was 91%. The molecular weights of poly(THPMI)r and poly(THPMI)a were M_n = 2750–3300 (M_w/M_n = 1.2–3.3) and M_n = 11300 (M_w/M_n = 6.0), respectively. The difference in molecular weights of the polymers was due to the differences in the termination mechanism of polymerization and the solubility of these polymers in THF. The thermal decomposition temperatures were 205 and 365°C. The first decomposition step was based on elimination of the tetrahydropyranyl group from the poly(THPMI). Positive image patterns were obtained by chemical amplification of positive photoresist composed of poly(THPMI) and 4‐morpholinophenyl diazonium trifluoromethanesulfonate used as an acid generator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 341–347, 1999     

Radical ring‐opening copolymerization behavior of vinyloxirane: Synthesis of copolymer from 2‐isopropenyl‐3‐phenyloxirane and styrene and its functionalization

The radical ring‐opening copolymerization of 2‐isopropenyl‐3‐phenyloxirane (1) with styrene (St) was examined to obtain the copolymer [copoly(1‐St)] with a vinyl ether moiety in the main chain. The copolymers were obtained in moderate yields by copolymerization in various feed ratios of 1 and St over 120 °C; the number‐average molecular weights (M_n) were estimated to be 1800–4200 by gel permeation chromatography analysis. The ratio of the vinyl ether and St units of copoly(1‐St) was estimated with the ¹H NMR spectra and varied from 1/7 to 1/14 according to the initial feed ratio of 1 and St. The haloalkoxylation of copoly(1‐St) with ethylene glycol in the presence of N‐chlorosuccinimide produced a new copolymer with alcohol groups and chlorine atoms in the side group in a high yield. The M_n value of the haloalkoxylated polymer was almost the same as that of the starting copoly(1‐St). The incorporated halogen was determined by elemental analysis. The analytical result indicated that over 88% of the vinyl ether groups participated in the haloalkoxylation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3729–3735, 2000     

Living cationic polymerization of ethyl 2-(vinyloxy)ethoxyacetate: A vinyl ether with an ether and an ester function in the pendant

Ethyl 2-(vinyloxy)ethoxyacetate ( 4 ; CH₂?CH? OCH₂CH₂OCH₂? COOC₂H₅), a vinyl ether having both carboxylic acid ester and oxyethylene unit in its pendant, afforded well-defined living polymers when polymerized by the hydrogen iodide/iodine (HI/I₂) initiating system in toluene at ?40°C. The polymers possessed a narrow molecular weight distribution (M _w/M _n ≤ 1.15), and their molecular weight (M _n) increased proportionally to monomer conversion or the molar ratio of the monomer to hydrogen iodide. The polymer molecular weight also increased upon addition of a fresh feed of the monomer to a completely polymerized reaction mixture. Polymers of high molecular weights (M _n > 5 × 10⁵) and broad molecular weight distributions were obtained by BF₃OEt₂ in toluene at ?40°C. Polymerization rate of 4 with HI/I₂ is ca. 100 times greater than that of the corresponding alkyl vinyl ether, and thus 4 was found to be one of the most reactive vinyl ethers thus far studied. Alkaline hydrolysis of the pendant ester groups of the polymers gave a vinyl ether-based polymeric carboxylic acid 6 with a narrow molecular weight distribution.     

Radical polymerization of N-phenyl-α-methylene-β-lactam

N-phenyl-α-methylene-β-lactam (PML), a cyclic analog of N,N-disubstituted methacrylamides which do not undergo radical homopolymerization, was synthesized and polymerized with α,α′-azobis (isobutyronitrile) (AIBN) in solution. Poly (PML) (PPML) is readily soluble in tetrahydrofuran, chloroform, pyridine, and polar aprotic solvents but insoluble in toluene, ethyl acetate, and methanol. PPML obtained by radical initiation is highly syndiotactic (rr = 92%), exhibits a glass transition at 180°C, and loses no weight upto 330°C in nitrogen. The kinetics of PML homo-polymerization with AIBN was investigated in N-methyl-2-pyrrolidone. The rate of polymerization (R_p) can be expressed by R_p = k[AIBN]^0.55[PML]^1.2 and the overall activation energy has been calculated to be 87.3 kJ/mol. Monomer reactivity ratios in copolymerization of PML (M₂) with styrene (M₁) are r₁ = 0.67 and r₂ = 0.41, from which Q and e values of PML are calculated as 0.60 and 0.33, respectively.