Capabilities of polymer-modified monodisperse colloidal silica particles as biomaterial carrier

 Polymer modification of monodispersed colloidal silica (0.5 μm) with poly(maleic anhydride-co-styrene) (P(MA-ST)) and poly (maleic anhydride-co-methyl methacrylate) (P(MA-MMA)) and application of the composite particles to biomaterial carriers were investigated. The reaction of bovine serum albumin(BSA)-immobilized P(MA-MMA)/SiO₂ with the anti-BSA antibody showed higher sensitivity in immunological agglutination test than BSA–P(MA-ST)/SiO₂, though immobilization efficiency of BSA on P(MA-MMA)/SiO₂ was lower than that on P(MA-ST)/SiO₂. Alkaline phosphatase and glucose oxidase immobilized on the composite particles exhibited extremely low activities, but α-chymotrypsin immobilized on P(MA-MMA)/SiO₂ and its derivative particles showed the relative activity of 12.5% and 16.1% to the native enzyme, respectively. Grafting of a hydrophilic polymer of poly(acrylic acid) to P(MA-ST)/SiO₂ let to an increase of the immobilized α-chymotrypsin activity to give the maximum relative activity of 55.5%. Received: 23 August 1996 Accepted: 16 October 1996     

An effective cross-linking of polymer layer on monodisperse, poly(maleic anhydride-styrene)-modified colloidal silica particles and properties of the composite

Summary  The cross-linkings of the surface polymer layer on mono disperse, poly(maleic anhydride-styrene)-modified silica particles by the reaction with diisocyanate were studied. The extent of cross-linking was estimated by the weight decrease by immersing the particles in the buffer solution of pH 2.0, 4.0 and 9.0 at a room temperature for 24 h. The reaction of the polymer-modified silica with 1,6-diisocyanatohexane afforded relatively stable composite particles which lost less than 5 wt% of the polymer in aqueous solution in the pH range 2.0–9.0. The diisocyanate was a preferable cross-linker to 2,4-diisocyanatotoluene in terms of stability in acidic or basic aqueous solution. The flexibility of the cross-linker molecule possibly plays an important role in the cross-linking reaction. The carboxyl and amino groups were formed by treating the cross-linked composite particles with diluted HCl solution; 5–6 and 0.5–1.1 μmol g^-1, respectively. The cross-linked composite particles exhibited the characteristic property of ζ-potential, −44 to −47 mV and −102 to −107 mV in a neutral aqueous solution and ethanol, respectively. Received: 26 May 1997 Accepted: 4 August 1997     

均分散球形氧化铕超细微粒的制备和表征

采用尿素分解法制备了均分散球形Eu(OH)CO~3·H~2O超细沉淀粒子,进一步在空气中750℃下焙烧4h,得到了均分散球形氧化铕超细微粒。考察了各种反应条件的影响,获得了最佳的制备条件。用XRD,IR,TEM,TG以及比表面测定等手段对样品进行了表征。     

Preparation of monodispersed colloidal particles

The procedures and the backgrounds for the formation of monodispersed colloidal particles are reviewed, along with the personal view of the author's own, by classifying a wide variety of the systems. This article consists of the size distribution control for uniform colloidal systems with typical examples, including homogeneous and heterogeneous systems, and the crystal habit control of monodispersed particles.     

Studies on monodispersed colloidal particles of doped yttrium compounds

Monodispersed particles of doped yttrium basic carbonates were prepared at aging at elevated temperature corresponding salts solutions in the presence of urea. Coprecipitation in mixed solutions of yttrium, lanthanum and neodymium salts under similar experimental conditions yielded composite particles of basic carbonates. The content of the three metals in the solids followed closely the initial composition of the reacting solutions. On calcination all prepared solids converted to their corresponding oxides while retaining their particle morphology. The so-prepared powders were characterized by various techniques.     

Preparation of micron-sized monodispersed highly monomer- “adsorbed” polymer particles having snow-man shape by utilizing the dynamic swelling method with tightly cross- linked seed particles

Micron-sized, monodispersed highly styrene-“adsorbed” particles having snow-man shape were prepared by the dynamic swelling method (DSM) with tightly cross-linked polymer seed particles as follows. First, 3.8 μm-sized monodispersed polystyrene (PS)/ poly(divinylbenzene) (PDVB) (PS/PDVB = 1/10 wt. ratio) composite particles produced by seeded polymerization utilizing DSM were dispersed in an ethanol/water (6/4, w/w) solution dissolving styrene monomer, and poly(vinyl alcohol) as a stabilizer. Second, water was subsequently added to the dispersion with a micro-feeder at a rate of 2.88 ml/h at room temperature. The cross-linked seed particles adsorbed a large amount of styrene onto the surfaces and resulted in mono-dispersed highly styrene-“adsorbed” snow-man shape particles having about 10 μm in diameter. Received: 16 April 1998 Accepted: 9 June 1998     

Preparation of micron-size monodisperse poly(2-hydroxyethyl methacrylate) particles by dispersion polymerization

Dispersion polymerization of 2-hydroxyethyl methacrylate using four categories of polymeric stabilizers in a mixture of good and poor solvents was performed to produce polymeric particles. The stabilizers employed were methyl methacrylate and styrene homopolymers, methacryloyl-terminated poly(methyl methacrylate) and polystyrene macromonomers, an amphiphilic poly(methyl methacrylate-co-methacrylic acid-graft-styrene), and polybutadiene derivatives containing reactive vinyl groups. Dispersion copolymerization with a small amount of the macromonomer gave micron-size particles with relatively narrow size distribution. The amphiphilic graft copolymer and the polybutadiene derivatives also afforded monodisperse particles. The mixed ratio between good and poor solvents greatly affected the particle size and size distribution. © 1996 John Wiley & Sons, Inc.     

Surface modification of colloidal silica particles

Colloidal silica particles in organic solvents were grafted, using several reagents, in order to make them hydrophobic. The hydrophobicity of the beads could be easily varied. Quasielastic light scattering and transmission electron microscopy experiments showed that no aggregation occurs during the reaction when monofunctional agents are used. Elemental analysis and solid-state NMR measurements gave us the rate of surface modification of the silanol groups. We also studied the rheological behaviour of the grafted particles as a function of the volume fraction in solvents of various hydrophobicity. Hexamethyldisilazane-grafted particles display hard-sphere behaviour in polar solvents such as 2-propanol, but not in alkanes, whereas dimethyldodecylchlorosilane-grafted particles flocculated in polar solvents but could easily be dispersed in apolar solvents. Received: 15 March 2000 Accepted: 11 July 2000     

Production of micron-sized monodispersed core/shell polymethyl methacrylate/polystyrene particles by seeded dispersion polymerization

 Micron-sized monodispersed polymethyl methacrylate (PMMA)/polystyrene (PS) (PMMA/PS=2/1, wt ratio) composite particles consisting of PMMA-core and PS-shell were successfully produced by seeded dispersion polymerization of styrene in a methanol/water medium in the presence of about 2 μm-sized monodispersed PMMA particles. From the view point of thermodynamic equilibrium, such a morphology is difficult to form by usual seeded polymerization in a polar medium such as water. It is concluded that seeded dispersion polymerization in which almost all monomers and initiators exist in the medium has an advantage to produce core/shell polymer particles in which polymer layers accumulate in their order of the production regardless of the hydrophobicity of polymers, because of high viscosity in polymerizing particles. Received: 9 December 1996 Accepted: 26 February 1997     

Mechanism of the growth of monodispersed spherical silica particles to the submicron size

Summary Monodispersed spherical submicron silica particles were obtained by the precipitation of soluble silica on the surface of preliminary obtained smaller particles. Silica was added into the system at low concentrations to prevent both its polymerization in the solution and the formation of new particles. The kinetics of the particle growth is controlled by the diffusion of soluble silica through the double diffusion layer.     

Preparation of monodispersed polystyrene microspheres uniformly coated by magnetite via heterogeneous polymerization

Composite microspheres of core-shell type were prepared by a seeded polymerization using monodispersed polystyrene seed latex (Ps) combined with an in situ dispersion of magnetite (Fe₃O₄) fine particles. The heterogeneous polymerization was carried out in aqueous dispersions of the Fe₃O₄ particles modified with sodium oleate. All the synthetic processes were carried out in a wet state to avoid serious agglomeration. The morphology of the composite particle and the size distribution were examined to discuss the effects on the polymerization parameters, such as monomer concentration, type and concentration of an initiator, magnetite particle concentration and the method of surface modification of Fe₃O₄.     

Kinetics of supramolecular crystallization of concentrated suspensions of monodisperse spherical silica particles

The kinetics of supramolecular crystallization of concentrated suspensions is three-dimensional and follows the Avrami-Erofeev equation: A=1-exp[-(kt)^m], where m=4. The rate constant k is proportional to the probability of the appearance of a crystallization center in unit volume in unit time and the linear crystal growth rate, which is determined experimentally.     

Preparation of monodispersed plate-like particles of tungstic acid

 To understand the properties of colloidal dispersions it is often vital to prepare model materials with particles that have a small polydispersity in order to make experimental tests of theories or models. However few preparations have been developed that yield anisotropic particles with a narrow size distribution and precise shape. In this paper the preparation of a dispersion of charge stabilized, tungstic acid particles is described. The particles are rectangular and have a length of 7.0 μm, a width of 2.8 μm and a thickness of 0.2 μm. The polydispersity is 8% in length and 10% in width, making it one of the most monodisperse dispersions of anisotropic particles. Each particle is monocrystalline and the crystal orientation is fixed with respect to the particle morphology. Some interesting behavior is observed: these particles aggregate perpendicular and parallel to each other to give flat, ordered flocs when the stability is reduced. Received: 22 January 1998 Accepted: 4 February 1998     

Preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with poly(2-oxazoline) macromonomer

This article describes the preparation of micron-size monodisperse polymer particles by dispersion copolymerization of styrene with a poly(2-oxazoline) macromonomer in an aqueous ethanol solution. The macromonomer acted as a comonomer as well as a stabilizer. The diameter of the particles increased as the concentration of the macromonomer decreased. The higher the molecular weight of the macromonomer, the smaller the particle size. The copolymerization in the solvent containing higher water content gave smaller polymer particles. Under the condition giving the monodisperse particles, the particles volume increased linearly with the yield of the particles. From ESCA analysis of the particle surface, poly(2-oxazoline) chains were enriched on the surface. © 1993 John Wiley & Sons, Inc.     

Features of composites prepared by radical graft-polymerization of styrene to a hydrophilic macromer adsorbed on ultrafine colloidal particles

Polymer modifications of ultrafine monodispersed colloidal metal oxide particles, smaller than 80 nm in diameter, by the graft-polymerization of styrene to a hydrophilic macromer adsorbed on the surface were investigated. The polymerization in ethanolic silica and titania colloid solution, which had negatively larger ζ-potentials, ?30 and ?42 mV in neutral aqueous solution respectively, gave poly(styrene)–silica or titania composite, being of nonspherical shape. The modifications of colloidal particles, having lower surface energy, such as Al(OH)₃ and CeO₂–TiO₂–SiO₂ complex, led to the formation of spherical composites, ranging in size from 500 to 3000 nm, of scattered metal oxide or hydroxide particles.     

纳米二氧化硅的表面改性研究

以γ-缩水甘油醚丙基三甲氧基硅烷(GPTMS)对酸催化水解正硅酸乙酯(TEOS)聚合得到的纳米二氧化硅胶粒表面进行接枝改性,用激光粒径仪测定二氧化硅颗粒的粒径,并用透射电子显微镜(TEM)观察了改性前后二氧化硅胶粒的分散状况,采用傅立叶红外(FTIR)光谱法对改性前后的二氧化硅粉体进行了分析,通过热失重分析(TGA)法对GPTMS接枝改性二氧化硅胶粒表面的接枝度进行分析计算,同时对颗粒溶胶的ζ电位进行了测试,结果表明:改性后二氧化硅胶粒分散性大大提高,硅烷偶联剂浓度对接枝度有显著影响,当GPTMS的浓度为1mL/S iO2(g)时,接枝度达到最大,且颗粒表面的物理化学性能发生显著变化。     

单分散金属介电复合粒子制备及表征研究

过去20年纳米材料科学与技术的飞速发展使人们对于这种新材料寄予极大的期望,合成、组装及设计纳米相材料取得了巨大的进步。一方面单纯的纳米线、纳米杆、纳米晶、纳米管、纳米带、纳米球及量子点材料不断的被报道;另一方面,人们也加大了寻找纳米复合材料的步伐。以二氧化硅等胶体球形粒子为基体发展起来的纳米包覆(nanocoating)技术引起人们的极大兴趣犤1犦。这种纳米包覆技术得到的产物常常被称为核壳粒子(core-shellparticles),通常包括作为核的基体球的表面性质改性与其它材料于表面包覆形成壳层。纳米包覆技术实际上也是粒子表面性质…     

Controlling stages of supramolecular crystallization in suspensions of monodispersed spherical silica particles

Supramolecular crystallization in alcohol suspensions of monodispersed spherical silica particles at pH ~ 7-7.8 is controlled by sedimentation of structural units. At pH ~ 7.8-10.5 or in the presence of indifferent (inert) electrolytes, the crystallization is controlled by the linear growth of supramolecular crystals. The peculiarities of crystallization and nucleation in both cases are discussed. This revised version was published online in August 2006 with corrections to the Cover Date.     

超细均分散稀土化合物胶粒的生长动力学

研究了尿素体系中超细均分散碳酸钕/碱式碳酸钇胶粒形成时, 粒子的尺寸随,以并运用Nielsen的时间因子分析法(Chronomal Analysis)表征了两种胶粒的生长机理, 获得了相应的速率常数。实验表明, 两种胶粒的生长(<40min)主要遵循表面反应控制的一级多核层增长机理。时间的变化规律