Syntheses and thermostabilities of N-[4-(N′-substituted aminocarbonyl)phenyl]maleimide polymers

Three types of novel N-[4-(N′-substituted aminocarbonyl)phenyl] maleimide (RPhMI: N-substituent (R) = phenyl, cyclohexyl, and cyclododecyl) were synthesized and homopolymerized under several conditions. In the copolymerizations of RPhMI (M₁) with styrene (ST; M₂) or methyl methacrylate (MMA; M₂), monomer reactivity ratios and Alfrey-Price Q, e values were determined. All homopolymers decomposed without softening and melting points. The initial degradation temperatures (T_d) of poly(RPhMI)s were over 320°C. The glass transition temperatures (T_g) of RPhMI copolymers were much higher than those of N-phenylmaleimide (PhMI)–ST, PhMI–MMA, N-cyclohexylmaleimide (CHMI)–ST, and CHMI–MMA copolymers. Thermal stability of the terpolymers of RPhMI with ST and acrylonitrile (AN) was higher than that of ST–AN copolymers, i.e., AS resin. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2001–2012, 1998     

Polymerization behavior of 2,2,6,6-tetramethylpiperidinyl methacrylate: A monomer carrying a hindered amine group

Copolymers of 2,2,6,6-tetramethylpiperidinyl methacrylate (TPMA) with styrene (S) and with methyl methacrylate (MMA) were synthesized using AIBN as initiator. S–TPMA copolymers from feed ranging from 0.10–0.80 mole fractions TPMA and MMA-TPMA copolymers from feed of 0.04–0.85 mole fractions TPMA were used in the determination of monomer reactivity ratios r₁, r₂. Four different methods were employed in the calculations of r₁ and r₂ and all calculated results were in good agreement with each other. The structure of S–TPMA copolymers was inferred to be of an alternating nature while that of MMA–TPMA copolymers was random. Both copolymers are potential hindered amine light stabilizers (HALS) and are expected to be less extractable from, and more compatible with, polystyrene and poly(methyl methacrylate) base polymers.     

Thermal properties of some hydrogenated poly(α-methyl styrenes)

The Synthesis of poly(isopropenyl cyclohexane) via the hydrogenation of poly(α-methyl styrene) is described. Depending on the reaction time and catalyst system a homopolymer or a copolymer is obtained. Under the conditions of synthesis both materials are highly syndiotactic. For the pure hydrogenated homopolymer (>99.9%) the glass transition temperature was found to be 185.4°C, about 20°C above T_g of poly(α-ethyl styrene). Contrary to expectations, the glass transitions of the 92/8, 33/67 poly(isopropenyl cyclohexane-co-methyl styrene) and poly(α-methyl styrene) are almost identical, as are the decomposition temperature ranges. Thermal data indicate that the decomposition mechanism of the copolymers and hydrogenated homopolymer is random scission. The thermogravimetric curves also indicate that the copolymers are random. Thus, chain stiffness appears not to increase rapidly with hydrogenation of this highly syndiotactic polymer.     

Polymerization behavior of 1,2,2,6,6-pentamethyl-4-piperidinyl m-isopropenyl-α,α-dimethylbenzyl carbamate

Copolymers of 1,2,2,6,6-pentamethyl-4-piperidinyl m-isopropenyl-α,α-dimethylbenzyl carbamate (CB) with styrene (S) and with methyl methacrylate (MMA) were synthesized using AIBN as initiator. S–CB copolymers made from feed ranging from 0.45–0.94 mole fractions S and MMA-CB copolymers made from feed of 0.34–0.88 mole fractions MMA were used to determine the monomer reactivity ratios r₁ and r₂. The structure of S–CB copolymers was inferred to be mainly of a random nature and in the MMA–CB copolymerization system there is a stronger tendency to form alternating copolymers. © 1993 John Wiley & Sons, Inc.     

Radical copolymerization of 3-tri-n-butylstannylstyrene with several vinyl monomers

The free radical homopolymerization and copolymerization of 3-tri-n-butylstannylstyrene (3-BTS) with styrene (ST), ethyl acrylate (EA), methyl methacrylate (MMA), vinyl acetate (VA), and acrylonitrile (AN) were carried out using 2,2′-azobisisobutyronitrile (AIBN) at 60°C. It was found that the yield of conversion to poly(3-BTS) increased with the molar ratio of initiator to monomer as well as with polymerization time. The conversion at equilibrium after 50 h was about 40%. The compositions of copolymer samples were determined from elemental analyses. Monomer reactivity ratio and Q-e values were calculated. The copolymers of 3-BTS-MMA and 3-BTS-AN were found to be alternating. The copolymers of 3-BTS with MMA, EA and AN were not soluble in any of a large number of organic solvents tested. The insolubility is believed to be due to formation of intermolecular coordination among the tributylstannyl moiety and the carbonyl or cyano groups of the polymer. These copolymers, however, were “soluble” in trihaloacetic acid, but this solubility was due to a cleavage of the trialkyltin moiety from the phenyl groups. The glass temperatures, T_g, and melting temperatures T_m, of the various polymers were also studied.     

Orientation and relaxation in uniaxially stretched styrene-co-methyl methacrylate random copolymers

Orientation and relaxation behavior in uniaxially stretched styrene-co-methyl methacrylate random copolymers was investigated. When compared at a reference temperature T = T_g + constant, orientation of methyl methacrylate units (MMA) decreases while styrene units orientation increases with a decrease in the styrene percentage. This behavior can be related to intermolecular interactions between MMA units and to the stiffness of styrene-MMA units, which do not undergo conformational changes upon stretching. Both monomer units relax the same in a given copolymer and chain relaxation increases when the styrene percentage increases. Orientation relaxation of styrene and MMA units can be reduced to two general relaxation master curves whatever the blend composition, when the results are compared at same monomeric friction coefficient. © 1994 John Wiley & Sons, Inc.     

The flame-retardant material - 1. Studies on thermal characteristics and flame retardance behavior of phosphorus-containing copolymer of methyl methacrylate with 2-methacryloxyethyl phenyl phosphate

2-Methacryloxyethyl phenyl phosphate/methyl methacrylate (MEPP/MMA) copolymers were synthesized by the bulk polymerization of MMA in the presence of various amounts of MEPP. MEPP was prepared by the esterification of phenyl dichlorophosphate with 2-hydroxyethyl methacrylate, followed by hydrolysis. Structural and compositional details of MEPP were obtained by Fourier transform infrared spectroscopy, ¹H nuclear magnetic resonance, ¹³C nuclear magnetic resonance, ³¹P nuclear magnetic resonance, and mass spectrometer, as well as by elemental analysis. The monomer reactivity ratios of MEPP/MMA system were calculated by the methods of Fineman-Ross, Kelen-Tüdös, and Joshi-Joshi. The thermal degradation temperature of the MEPP/MMA copolymers was considerably enhanced by only a slight decrease in T_g, as determined by differential scanning calorimetry and thermogravimetric analysis experiments. The fire-retardant properties of MEPP/MMA copolymers were also studied by LOI and UL-94 tests, indicating that an MEPP/MMA copolymer with only 2.17 wt% phosphorus can effectively inhibit burning.     

Copolymers of methyl methacrylate and fluoroalkyl methacrylates: Effects of fluoroalkyl groups on the thermal and optical properties of the copolymers

Fluoroalkyl methacrylates, 2,2,2‐trifluoroethyl methacrylate ( 1 ), hexafluoroisopropyl methacrylate ( 2 ), 1,1,1,3,3,3‐hexafluoro‐2‐methyl‐2‐propyl methacrylate ( 3 ), and perfluoro t‐butyl methacrylate ( 4 ) were synthesized. Homopolymers and copolymers of these fluoroalkyl methacrylates with methyl methacrylate (MMA) were prepared and characterized. With the exception of the copolymers of MMA and 2,2,2‐trifluoroethyl methacrylate ( 1 ), the glass transition temperatures (T_gs) of the copolymers were found to deviate positively from the Gordon‐Taylor equation. The positive deviation from the Gordon‐Taylor equation could be accounted for by the dipole–dipole intrachain interaction between the methyl ester group and the fluoroalkyl ester group of the monomer units. These T_g values of the copolymers were found to fit with the Schneider equation. The fitting parameters in the Schneider equation were calculated, and R² values, the coefficients of determination, were almost 1.0. The refractive indices of the copolymers, measured at 532, 633, and 839 nm wavelengths, were lower than that of PMMA and showed a linear relationship with monomer composition in the copolymers. 2 and MMA have a tendency to polymerize in an alternating uniform monomer composition, resulting in less light scattering. This result suggests that the copolymer prepared with an equal molar ratio of 2 and MMA may have useful properties with applications in optical devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4748–4755, 2008     

Statistical copolymers of methyl methacrylate and 2‐methacryloyloxyethyl ferrocenecarboxylate: Monomer reactivity ratios,thermal and electrochemical properties

Statistical copolymers of methyl methacrylate (MMA) with 2‐methacryloyloxyethyl ferrocenecarboxylate (MAEFC) were prepared by free radical polymerization. The reactivity ratios were estimated using the Fineman‐Ross, inverted Fineman‐Ross, Kelen‐Tüdos, and extended Kelen‐Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. The glass‐transition temperature (T_g) values of the copolymers were measured and examined by means of several theoretical equations, allowing the prediction of these T_g values. The thermal degradation behavior of the copolymers was also studied and compared with the respective homopolymers. Cyclic voltammetry was employed to study the electrochemical properties of the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

2,3,4,5,6‐Pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes were readily copolymerized with methyl methacrylate (MMA) by a free radical initiator. The copolymers were soluble in tetrahydrofuran and acetone. The films obtained were transparent and flexible. The glass transition temperatures (T_gs) of the copolymers were found positively deviated from the Gordon–Taylor equation. The positive deviation could be accounted for by dipole–dipole intrachain interaction between the methyl ester group of MMA and the highly fluorinated aromatic moiety, which resulted in a decrease in the segmental mobility of the polymer chains and the enhanced T_g values of the copolymers. The water absorption of PMMA was greatly decreased by copolymerization of MMA with the highly fluorinated styrenes. With as little as 10 mol % of pentafluoro styrene content in the copolymer, the water absorption was decreased to one‐third of that for pure PMMA. The fluorinated styrenes‐MMA copolymers were thermally stable up to 420 °C under air and nitrogen atmospheres. With 50 mol % of MMA in the copolymer, the copolymer was still stable up to 350 °C. Since these copolymers contain a large number of fluorine atoms, the light absorption in the region of the visible to near infrared is decreased in comparison with nonfluorinated polymers. Thus, these copolymers may be suitable for application in optical devices, such as optical fibers and waveguides. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Kinetics of free-radical copolymerization of α-methylstyrene and styrene

The free-radical copolymerization of α-methylstyrene and styrene has been studied in toluene and dimethyl phthalate solutions at 60°C. Gas chromatography was used to monitor the rate of consumption of monomers. For styrene alone, the measured rate of polymerization R_p and M?_n of the polymer coincided with values expected from previous studies by other workers. Solution viscosity η affected R_p and M?_n of styrene homopolymers and copolymers as expected on the basis of an inverse proportionality between η^1/2 and termination rate. The rate of initiation by azobisisobutyronitrile appears to be independent of monomer feed composition in this system. Molecular weights of copolymers can be accounted for by considering combinative termination only. The effects of radical chain transfer are not significant. A theory is proposed in which the rate of termination of copolymer radicals is derived statistically from an ideal free-radical polymerization model. This simple theory accounts quantitatively for R_p and M?_n data reported here and for the results of other workers who have favored more complicated reaction models because of the apparent failure of simple copolymer reactivity ratios to predict polymer composition. This deficiency results from systematic losses of low molecular weight copolymer species in some analyses. Copolymer reactivity ratios derived with the assumption of a simple copolymer model and based on rates of monomer loss can be used to predict R_p values measured in other laboratories without necessity for consideration of depropagation or penultimate unit effects. The 60°C rate constants for propagation and termination in styrene homopolymerization were taken to be 176 and 2.7 × 10⁷ mole/l.-sec, respectively. The corresponding figures for α-methylstyrene are 26 and 8.1 × 10⁸ mole/l.-sec. These constants account for the sluggish copolymerization behavior of the latter monomer and the low molecular weights of its copolymers. The simple reaction scheme proposed here suggests that high molecular weight styrene–α-methylstyrene copolymers can be produced at reasonable rates at 60°C by emulsion polymerization. This is shown to be the case.     

Radiolysis of resist polymers. VI. Copolymers of trihalophenylmethacrylate and methyl methacrylate

Copolymers of several compositions of methyl methacrylate (MMA), trichlorophenyl methacrylate (TCPMA), and tribromophenyl methacrylate (TBPMA) have been synthesized and characterized. Gamma radiolysis yields are very sensitive to the presence of the halogenated monomers. With less than 10% of the halogenated monomer in the copolymers. G_s values were found to be much greater than that of PMMA. However, the halogenated monomer introduces a tendency toward crosslinking. The results are consistent with the enhancement of chain scission by dissociative electron capture and the tendency of phenyl radical intermediates to cause crosslinking. These structure-property relationships were found to be valid for all the homopolymers and copolymers investigated in this series.     

Addition–fragmentation behavior of a capto-dative group-substituted acrylic ester in free-radical polymerization and reactivity of the derived macromonomers

Ethyl-2-(2-cyano-2-ethylthio)-ethyl-propenoate (ECEP) was synthesized and examined as free-radical addition–fragmentation chain transfer agent (AFCTA) in the bulk polymerization of methyl methacrylate (MMA) and styrene at various temperatures. A better chain transfer constant (C_tr) was observed for styrene than for MMA, projecting the potentiality of the compound as a better end-functionalizing agent for the former. In both cases, copolymerization of ECEP with the monomer predominated over fragmentation, the relative proportions of which were dependent on the monomer. The ECEP-terminated radical fragmented to an extent of 26% in the presence of MMA, whereas it was only 9.5% in the case of styrene. The relative extent of fragmentation and copolymerization was in conformation to the calculated reactivity ratios and chain transfer constants. Addition–fragmentation chain transfer resulted in the formation of methacrylic-functional macromonomers. The copolymerizability of the resultant macromonomer was found to depend on the nature of the backbone and on the comonomer. On copolymerizing with MMA, the terminal monomer moiety on polystyrene (PS)-based macromonomers preferred to undergo fragmentation, whereas that of the polymethyl methacrylate (PMMA)-based one copolymerized readily with styrene because of thermodynamic and kinetic factors. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2511–2524, 1999     

Synthesis and characterization of well‐defined ABC‐type triblock copolymers via atom transfer radical polymerization and stable free‐radical polymerization

An asymmetric difunctional initiator 2‐phenyl‐2‐[(2,2,6,6 tetramethylpiperidino)oxy] ethyl 2‐bromo propanoate ( 1 ) was used for the synthesis of ABC‐type methyl methacrylate (MMA)‐tert‐butylacrylate (tBA)‐styrene (St) triblock copolymers via a combination of atom transfer radical polymerization (ATRP) and stable free‐radical polymerization (SFRP). The ATRP‐ATRP‐SFRP or SFRP‐ATRP‐ATRP route led to ABC‐type triblock copolymers with controlled molecular weight and moderate polydispersity (M_w/M_n < 1.35). The block copolymers were characterized by gel permeation chromatography and ¹H NMR. The retaining chain‐end functionality and the applying halide exchange afforded high blocking efficiency as well as maintained control over entire routes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2025–2032, 2002     

Preparation and addition polymerization of substituted 2-oxazolines

The new oxazoline-containing monomers, 4-acrylyloxymethyl-2,4-dimethyl-2-oxazoline (AOMO), 4-methacrylyloxymethyl-2,4-dimethyl-2-oxazoline (MAOMO), 4-methacrylyloxymethyl-2-phenyl-4-methyl-2-oxazoline (PMAOMO), and the previously known monomer, 2-isopropenyl-4,4-dimethyl-2-oxazoline (IPRO), were synthesized for addition polymerization studies. The monomers were homopolymerized in benzene using a free radical initiator and in aqueous media using emulsion techniques. Molecular weights of 8,000–15,000 (M?_w) were obtained for the homopolymers. Copolymerization studies were carried out with AOMO, MAOMO, and IPRO as M₁, and methyl methacrylate (MMA), methyl acrylate (MA), styrene (STY), acrylonitrile (AN), and vinyl acetate (VA) as M₂ for each case of M₁. Relative reactivity ratios for the fifteen copolymers and Q and e values for the three oxazoline monomers were determined. The r₁ values for AOMO and MAOMO copolymerizations indicated a lower value of k₁₁ than expected, presumably because of steric effects. The r₁ values in the IPRO copolymerizations were somewhat larger than expected. It was proposed that significant electron donation to the radical center of IPRO·by resonance effects occured.     

ATRP of methyl methacrylate initiated with a bifunctional initiator bearing bromomethyl functional groups: Synthesis of the block and graft copolymers

This article reports the synthesis of the block and graft copolymers using peroxygen‐containing poly(methyl methacrylate) (poly‐MMA) as a macroinitiator that was prepared from the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in the presence of bis(4,4′‐bromomethyl benzoyl peroxide) (BBP). The effects of reaction temperatures on the ATRP system were studied in detail. Kinetic studies were carried out to investigate controlled ATRP for BBP/CuBr/bpy initiating system with MMA at 40 °C and free radical polymerization of styrene (S) at 80 °C. The plots of ln ([M_o]/[M_t]) versus reaction time are linear, corresponding to first‐order kinetics. Poly‐MMA initiators were used in the bulk polymerization of S to obtain poly (MMA‐b‐S) block copolymers. Poly‐MMA initiators containing undecomposed peroygen groups were used for the graft copolymerization of polybutadiene (PBd) and natural rubber (RSS‐3) to obtain crosslinked poly (MMA‐g‐PBd) and poly(MMA‐g‐RSS‐3) graft copolymers. Swelling ratio values (q_v) of the graft copolymers in CHCl₃ were calculated. The characterizations of the polymers were achieved by Fourier‐transform infrared spectroscopy (FTIR), ¹H‐nuclear magnetic resonance (¹H NMR), gel‐permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), and the fractional precipitation (γ) techniques. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1364–1373, 2010     

Styrene polymerization with some new macro or macromonomeric azoinitiators having peg units

Several new macroinitiators and macromerinitiators (macroinimers) were synthesized and evaluated for the bulk polymerization of sytrene at 60°C. Macroinitiators were prepared from the reaction of 4,4′-dicyano-4,4′ azovaleryl chloride ( 1 ) with poly(ethylene glycol) (PEG) with a M_ω of 400 and with either benzoyl chloride, acetyl chloride, phenyl isocyanate, or poly(ethylene glycol) oleyl ether. Macromer initiators were also prepared from the reaction of 1 with PEG having M_ω values of 200, 400, 600, 1000, or 1500 and with 4-vinylbenzyl chloride. The bulk polymerization of styrene by macroinimers gave crosslinked styrene-PEG block copolymers, while the polymerization by macroinitiators gave soluble copolymers. The molecular weights of the styrene-PEG block copolymers obtained with macroinitiators having either oleyl, benzoyl, or phenyl urethane end groups were 22000–29000 g/mol. DSC measurements showed that the crosslinked block copolymers had crystalline PEG units with melting transitions ranging from 11–37°C. © 1994 John Wiley & Sons, Inc.     

Miscibility diagrams of random copolymer blend systems

The miscibility of copolymers A_xB_1?x and A_yB_1?y, derived from the same monomer pair (A, B) but differing in composition, was studied. The systems (A, B) were (S, MMA), (BMA, MMA), (S, BMA), and (CIS, BMA) (S: styrene, CIS: p-chlorostyrene, MMA: methylmethacrylate, BMA: n-butylmethacrylate). Miscibility diagrams were recorded, at low and high temperatures, using cast films and dry films. All blend systems feature hightemperature miscibility gaps. Unusual effects of the compositions x and y on miscibility in blends A_xB_1?x/A_yB_1?y were observed. The classical prediction that miscibility should depend only on the composition difference |x – y| usually is too simple. It appears necessary to consider dyad interactions.     

Biobased Polymers via Radical Homopolymerization and Copolymerization of a Series of Terpenoid-Derived Conjugated Dienes with exo-Methylene and 6-Membered Ring

A series of exo-methylene 6-membered ring conjugated dienes, which are directly or indirectly obtained from terpenoids, such as β-phellandrene, carvone, piperitone, and verbenone, were radically polymerized. Although their radical homopolymerizations were very slow, radical copolymerizations proceeded well with various common vinyl monomers, such as methyl acrylate (MA), acrylonitrile (AN), methyl methacrylate (MMA), and styrene (St), resulting in copolymers with comparable incorporation ratios of bio-based cyclic conjugated monomer units ranging from 40 to 60 mol% at a 1:1 feed ratio. The monomer reactivity ratios when using AN as a comonomer were close to 0, whereas those with St were approximately 0.5 to 1, indicating that these diene monomers can be considered electron-rich monomers. Reversible addition fragmentation chain-transfer (RAFT) copolymerizations with MA, AN, MMA, and St were all successful when using S-cumyl-S’-butyl trithiocarbonate (CBTC) as the RAFT agent resulting in copolymers with controlled molecular weights. The copolymers obtained with AN, MMA, or St showed glass transition temperatures (T_g) similar to those of common vinyl polymers (T_g ~ 100 °C), indicating that biobased cyclic structures were successfully incorporated into commodity polymers without losing good thermal properties.     

Synthesis of polyphenylquinoxaline copolymers via aromatic nucleophilic substitution reactions of an A‐B quinoxaline monomer

A self‐polymerizable quinoxaline monomer (A‐B) has been synthesized and polymerized via aromatic nucleophilic substitution reactions. An isomeric mixture of self‐polymerizable quinoxaline monomers—2‐(4‐hydroxyphenyl)‐3‐phenyl‐6‐fluoroquinoxaline and 3‐(4‐hydroxyphenyl)‐2‐phenyl‐6‐fluoroquinoxaline—was polymerized in N‐methyl‐2‐pyrrolidinone (NMP) to afford high molecular weight polyphenylquinoxaline (PPQ) with intrinsic viscosities up to 1.91 dL/g and a glass‐transition temperature (T_g) of 251 °C. A series of comonomers was polymerized with A‐B to form PPQ/polysulfone (PS), PPQ/polyetherether ketone (PEEK), and PPQ/polyethersulfone (PES) copolymers. The copolymers readily obtained high intrinsic viscosities when fluorine was displaced in NMP under reflux. However, single‐electron transfer (SET) side reactions, which limit molecular weight, played a more dominant role when chlorine was displaced instead of fluorine. SET side reactions were minimized in the synthesis of PPQ/PS copolymers through mild polymerization conditions in NMP for longer polymerization times. Thus, the T_g's of PES (T_g = 220 °C), PEEK (T_g = 145 °C), and PS (T_g = 195 °C) were raised through the incorporation of quinoxaline units into the polymer. Copolymers with high intrinsic viscosities resulted in all cases, except in the case of PPQ/PEEK copolymers when 4,4′‐dichlorobenzophenone was the comonomer. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2037–2042, 2001