A novel synthesis of reactive polymers with pendant halomethyl groups by the polyaddition reaction of bis(epoxide)s with bis(chloroacetoxy)esters or bis(bromoacetoxy)esters

New reactive polymers with pendant halomethyl groups were successfully synthesized by polyaddition reactions of bis(epoxide)s with bis(chloroacetoxy)ester such as 1,4-bis [(chloroacetoxy)methyl]benzene (BCAMB) or 1,4-bis[(bromoacetoxy)methyl]benzene (BBAMB) using quaternary onium salts or crown ether complexes as catalysts. The polyaddition reaction of diglycidyl ether of bisphenol A (DGEBA) with BCAMB proceeded very smoothly with high yields (83–96%) by the addition of quaternary onium salts such as tetrabutylphosphonium bromide (TBPB) or crown ether complexes such as 18-crown-6/KBr as catalysts to produce high molecular weight polymers, although the reaction occurred without any catalyst to give low molecular weight polymer in low yield at 90°C for 48 h. It was also found that the reaction proceeded smoothly in aprotic polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc) to produce high molecular weight polymers. Polyaddition reactions of DGEBA or digylcidyl ether of ethylene glycol (DGEEG) with BBAMB, other bis(chloroacetoxy)esters or bis(bromoacetoxy)esters using TBPB in DMAc also proceeded smoothly to give the corresponding polymers. The resulting poly(ether-ester)s contain reactive halomethyl groups as side chains, which were introduced during main chain formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3791–3799, 1997     

A novel synthesis of polyethers with pendant hydroxyl groups by polyaddition of bis(oxetane)s with bis(phenol)s

The polyaddition of 1,4-bis[(3-ethyl-3-oxetanyl)methoxymethyl]benzene (BEOB) with 3,3′,5,5′-tetrachlorobisphenol A (TCBPA) was examined with or without catalysts. High molecular weight polymer (polymers 1) (M_n = 13,600) with pendant primary hydroxyl groups was obtained in a 99% yield without any gel products when the reaction was performed with 5 mol % of tetraphenylphosphonium bromide as a catalyst in NMP at 160°C for 96 h. However, when the reaction was carried out without a catalyst under the same conditions, a low molecular weight polymer (M_n = 3200) was obtained in a 51% yield. The structure of the resulting polymer was confirmed by IR, ¹H-NMR, and ¹³C-NMR spectra. In this reaction system, it was also found that tetraphenylphosphonium iodide and crown ether complexes such as 18-crown-6 (18-C-6)/KBr and 18-C-6/KI have high catalytic activity. Polyadditions of 1,4-bis[(3-methyl-3-oxetanyl)methoxymethyl]benzene with TCBPA and BEOB with 3,3′,5,5′-tetrabromobisphenol-S were also examined, and corresponding polymers (polymers 2 and 3) were obtained in good yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2781–2790, 1999     

Pd(0)‐catalyzed polyaddition of bifunctional vinyloxiranes with 1,3‐dicarbonyl compounds: The synthesis of polymers containing hydroxy and carbonyl groups

The palladium(0)‐catalyzed polyaddition of bifunctional vinyloxiranes [1,4‐bis(2‐vinylepoxyethyl)benzene ( 1a ) and 1,4‐bis(1‐methyl‐2‐vinylepoxyethyl)benzene ( 1b )] with 1,3‐dicarbonyl compounds [methyl acetoacetate ( 4 ), dimethyl malonate ( 6 ), and Meldrum's acid ( 8 )] was investigated under various conditions. The polyaddition of 1 with 4 was carried out in tetrahydrofuran with phosphine ligands such as PPh₃ and 1,2‐bis(diphenylphosphino)ethane (dppe). Polymers having hydroxy, ketone, and ester groups in the side groups ( 5 ) were obtained in good yields despite the kinds of ligands employed. The number‐average molecular weight value of 5b was higher than that of 5a . The polyaddition of 1b and 6 was affected by the kinds of ligands employed. The corresponding polymer 7b was not obtained when PPh₃ and 1,2‐bis(diphenylphosphino)ferrocene were used. The polyaddition was carried out with dppe as the ligand and gave polymer 7b in a good yield. The molecular weight of the polymer obtained from 1b and 8 was much higher than those of polymers 5b and 7b . The polyaddition with Pd₂(dba)₃ · CHCl₃/dppe as a catalyst (where dba is dibenzylideneacetone) produced polymer 9b in a 92% yield (number‐average molecular weight = 45,600). The stereochemistries of all the obtained polymers were confirmed as an E configuration by the coupling constant of the vinyl proton. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2487–2494, 2002     

Synthesis of new linear polymers containing phosphorus atom in the main chain by the radical polyaddition: Addition polymers of phenylphosphine with 1,4-divinylbenzene or 1,4-diisopropenylbenzene and their properties

A polyaddition of phenylphosphine (PH) to 1,4-divinylbenzene (DVB) or 1,4-diisopropenylbenzene (DIPB) was carried out by radical initiations or UV irradiation at 60–80°C in toluene under a nitrogen atmosphere. The soluble polymer with higher molecular weight () was obtained in a high yield with AIBN initiator for 95 h in the presence of 5% excess of PH to DVB (monomer feed ratio [DVB]₀/[PH]₀ = 1/1.05). On the other hand, a polyaddition of PH to DIPB proceeded much slower than the case of DVB, but the high polymer was obtained in a high yield by choosing polyaddition conditions such as polyaddition temperature and initiator concentration. From ¹H-NMR, IR analyses, and phosphorus content of the polymers, it was characterized that both polymers have the alternating structure consisting of PH and DVB or DIPB units in 1 : 1 ratio. The glass transition and decomposition temperatures of both polymers under a nitrogen atmosphere were almost similar: 15–30°C and 380–385°C, respectively; but, the polymers were oxidized by heating under an atmosphere of air. The polymers had a self-extinguishing property and the polymer blend of the flammable polymers such as polystyrene and polyethylene with the phosphorus-containing polymers exhibited an excellent flame resistance. © 1994 John Wiley & Sons, Inc.     

Synthesis and properties of blue light‐emitting,silicon‐containing,regio‐ and stereoregular conjugated polymers

This article concerns the hydrosilylation polyaddition of 1,4‐bis(dimethylsilyl)benzene ( 1 ) with 4,4′‐diethynylbiphenyl, 2,7‐diethynylfluorene ( 2b ), and 2,6‐diethynylnaphthalene with RhI(PPh₃)₃ catalyst. Trans‐rich polymers with weight‐average molecular weights (M_w's) ranging from 19,000 to 25,000 were obtained by polyaddition in o‐Cl₂C₆H₄ at 150–180 °C, whereas cis‐rich polymers with M_w's from 4300 to 34,000 were obtained in toluene at 0 °C–r.t. These polymers emitted blue light in 4–81% quantum yields. The cis polymers isomerized into trans polymers upon UV irradiation, whereas the trans polymers did not. The device having a layer of polymer trans‐ 3b obtained from 1 and 2b demonstrated electroluminescence without any dopant. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2774–2783, 2004     

Organometallic polymers. XXV. Preparation of polyvinylferrocene

The synthetic details of solution polymerization in benzene and bulk polymerization of vinylferrocene are reported. In benzene solutions, with azobisisobutyronitrile (AIBN) as the initiator, small yields of low-polydispersity low molecular weight (M?_n ? 5000) polyvinylferrocene is obtained. However, high yields can be obtained by continuous or multiple AIBN addition. Higher molecular weight polymers and binodal polymers can be obtained as the monomer concentration is increased. In bulk polymerizations, yields of 80% can be obtained. The molecular weight increases as temperature decreases from 80 to 60°C in bulk polymerizations, and an increasing amount of insoluble polymer results. The soluble portion is often binodal, the higher molecular weight node consisting of an increasingly branched structure. Lower molecular weight polymer was readily fractionated into narrow fractions from benzene–methanol systems, but higher molecular weight polymer proved impossible to fractionate into narrow fractions due to branching.     

Polyaddition of p-benzenedithiol to p-diethynylbenzene in solid state under UV irradiation

A novel polyaddition of p-benzenedithiol (BDT) to p-diethynylbenzene (DEB) was studied in solid state under UV or γ-ray irradiation at 25–99°C. Thin layer crystals of the 1:1 mixture of BDT and DEB mounted on a glass plate were prepared by a sublimation of an equimolar amount of the mixture of BDT and DEB at 45–80°C under a reduced pressure of nitrogen. The thin layer crystal of the 1:1 mixture of BDT and DEB and that of polymers exhibited almost similar and high crystalline diffraction patterns on x-ray diagraph. Consequently, the polyaddition in the solid state was a topotactic reaction controlled by the crystal lattice of the 1:1 mixture of BDT and DEB. The arrangement of both compounds in the thin layer crystal of the 1:1 mixture of BDT and DEB is seemingly quite ordered induced by a molecular interaction between BDT and DEB, and this is supported on the basis of the broad absorption at 340–450 nm by the diffuse reflectance spectrum taken with the thin layer crystal of the 1:1 mixture of BDT and DEB. The melting point of the 1:1 mixture of BDT and DEB was 90–94°C. However, the polyaddition at 87°C proceeded in a molten state perhaps due to heat evolved in the polyaddition. In the solid state polyaddition M _n of polymers obtained was 3–4 × 10³, whereas in the molten state polyaddition the crystallinity of polymers remarkably decreased, and M _n increased several times.     

Novel synthesis of reactive polycarbonates with pendant chloromethyl groups by the polyaddition of bis(oxetane)s with 2,2′‐bis[(4‐chloroformyl)oxyphenyl]propane

The polyaddition of 1,4‐bis[(3‐ethyl‐3‐oxetanyl)methoxymethyl]benzene with 2,2′‐bis[(4‐chloroformyl)oxyphenyl]propane was examined with quaternary onium salts as catalysts. When the polyaddition was carried out with tetrabutylphosphonium bromide in chlorobenzene at 120 °C for 24 h, the corresponding poly(alkyl aryl carbonate) with a high molecular weight (number‐average molecular weight = 16,700) was obtained in an almost quantitative yield. It was found from the ¹H NMR and ¹³C NMR spectra of the obtained polymer that the addition reaction proceeded without any side reactions, providing the polycarbonate with pendant chloromethyl groups in the side chain. The polyaddition of bis{[3‐(3‐ethyloxetanyl)]methyl}terephthalate also proceeded smoothly and gave the corresponding polycarbonate with high molecular weight in a good yield. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2304–2311, 2003     

Studies on microgels, 3. Synthesis using living free radical polymerization

Microgels which are soluble crosslinked polymer networks have been prepared using the nitroxide living free radical polymerization methodology. When heated in the presence of tert-butylstyrene and 1,4-divinylbenzene, the alkoxyamine 1 derived from 2,2′-azoisobutyronitrile (AIBN) afforded a high molecular weight soluble polymer which was shown by size exclusion chromatography in conjunction with an on-line multi angle laser light scattering (MALLS) detector to have microgel properties.     

On the radiation-induced polyaddition of bisperfluoroisopropenyl terephthalate with 1,4-dioxane

Radical polyaddition of bis(α-trifluoromethyl-β,β-difluorovinyl)terephthalate [CF₂C(CF₃)OCOC₆H₄COOC(CF₃)CF₂] (BFP) with 1,4-dioxane (DOX) afforded higher molecular weight polymers under γ-rays radiation from a source when compared to those yielded by benzoyl peroxide initiation. More detailed study on the radiation-induced polyaddition of BFP with DOX and optimization of the reaction conditions were carried out. It was necessary to irradiate with doses of 2000, 1500, and 750 kGy, to obtain quantitative conversion of BFP at the feed molar ratios DOX/BFP of 8.0, 16, and 32, respectively. Step-growth polymerization mechanism was suggested by the measurements of molecular weights of the polymers obtained with several irradiation doses. It was concluded that the molecular weight of the polymer could be controlled by the feed molar ratio of DOX/BFP and irradiation doses. The steep increase of molecular weight was observed at the feed molar ratio of DOX/BFP of 8.0 with the irradiation doses above 2000 kGy and the polymer with the weight-average molecular weight of 2.36×10⁴ was obtained with the dose of 3000 kGy. The reaction between polymers might take place after the quantitative conversion of BFP. Radiation-induced radical polyaddition mechanism of BFP with DOX was proposed.     

Synthesis of π-conjugated poly(arylene)s by polycondensation of 1,4-bis(3-methylpyridin-2-yl)benzene and aryl dibromides through regiospecific C-H functionalization process

On the basis of the Ru-catalyzed regiospecific direct double arylation of benzene rings possessing 3-methylpyridin-2-yl substituents to produce 1-aryl-2-(3-methylpyridin-2-yl)benzene derivatives, the synthesis of poly(p-phenylene) derivatives having 2,5-bis(3-methylpyridin-2-yl) substituents is described. The reaction of 1,4-bis(3-methylpyridin-2-yl)benzene with bromobenzene (2 equiv) was carried out in the presence of [RuCl₂(η⁶-C₆H₆)]₂ (5 mol %) in 1-methyl-2-pyrrolidone at 120°C for 24 h to produce 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene in 99% yield as a sole product. Neither 2,6-diphenylated nor further phenylated products was produced under the examined conditions. This regiospecific double arylation process was then applied to the synthesis of π-conjugated polymers by use of aryl dibromides such as 1,4-dibromobenzene, 2,7-dibromo-9,9-dihexylfluorene, and 2,5-dibromothiophene. For example, a polymer was obtained in 73% yield by using 1,4-dibromobenzene, whose M_n and M_w/M_n were estimated to be 3300 and 1.51, respectively. The bathochromic shift of the ultraviolet (UV)–visible absorption spectrum with respect to that of the model compound, 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene, indicated the extension of the π-conjugation. The blue fluorescence was also observed for the polymer upon the UV irradiation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2771–2777     

Synthesis of novel polymer containing selenium by radical addition polymerization of 1,4-benzenediselenol to 1,4-divinylbenzene

A novel addition polymerization of 1,4-benzenediselenol (BDSe) to 1,4-divinylbenzene (DVB) was carried out with various azo radical initiators [dimethyl 2,2′-azobisisobutyrate (DAIB), 1,1′-azobis(1-acetoxy-1-phenylethane) (AAPE), and AIBN] in toluene at 65 and 75°C under a nitrogen atmosphere. The polymerization proceded without an induction period, and pale-yellowish powder polymers were obtained in 89% yields for 75 h (DAIB), 89% yields for 24 h (AAPE), and 60% yields for 8 h (AIBN). The molecular weight (M_w) of the insoluble polymers in toluene was about 4000 (IBN) to 14,000 (DAIB or AAPE) by GPC. The polymer had an alternating structure of BDSe to DVB units by ¹H-NMR, IR analyses, and selenium contents, but the polymer contained the diselenide linkage by Raman spectroscopy. By AIBN initiator, the yield of the polymers did not increase over 60% and higher molecular weight polymer was hardly obtained. According to the model addition reaction of benzeneselenol to styrene by AIBN, it was found that AIBN was consumed by the side reaction between dimethyl-N-(2-cyano-2-propyl)ketenimine derivedAppl 11 from AIBN and benzeneselenol to give the adduct C, MH⁺ 295 by DCI MS. On the other hand, DAIB and AAPE initiators, which do not form a ketenimine intermediate, gave the polymers of higher molecular weight in a higher yield. The polymer film exhibited high refractive index (n²⁵_D = 1.81) and a reversible phase transition between a transparency and an opaque by thermal mode. © 1994 John Wiley & Sons, Inc.     

共轭聚全氟丁炔-2的合成和性质

<正> 由于聚乙炔具有导电性能,近年来,人们对聚炔烃化学引起了广泛的重视。1979年Yamabe等设想用氟原子取代聚乙炔上的氢原子,期望得到对氧稳定的聚炔烃。最近Bubner等报道了用正丁基锂和氯化钯在DMF中催化三氟申基乙炔得到稳定的低分子量线型聚合物。当用碘蒸气掺杂后,其电导率σ_(max)达9.510~(-5)~(-1)cm~(-1)。另有文献报道     

Fluorescence quenching and laser photolysis of dipyrrolylbenzenes in the presence of chloromethanes

Fluorescence quenching of 1,4-bis(1H-pyrrol-1-yl)benzene, 1-(1H-pyrrol-2-yl)-1-(1-vinyl-1H-pyrrol-1-yl)benzene, and 1,4-bis(1-vinyl-1H-pyrrol-2-yl)benzene with chloromethanes (methylene chloride, chloroform, and carbon tetrachloride) in solvents with different polarities follows electron-transfer mechanism. The occurrence of an electron-transfer step is confirmed by formation of short-lived pyrrolylbenzene radical cations. An exception is quenching of fluorescence of 1,4-bis(1-vinyl-1H-pyrrol-2-yl)benzene in n-hexane in the presence of CCl₄ and CHCl₃ and in pure CCl₄. In this case, neutral 1,4-bis(1-vinyl-1H-pyrrol-2-yl)benzene^·-Cl radical is formed via recombination of 1,4-bis(1-vinyl-1H-pyrrol-2-yl)benzene radical cation and chloride anion. A relation was found between the nature of the short-lived species detected by laser photolysis and stable product obtained by stationary photolysis.     

Polymerization of 1,4-bis[2-(N-vinyl)pyrrolyl]benzene

Polymers of 1,4-bis[2-(N-vinyl)pyrrolyl]benzene with free N-vinyl groups in side chains are synthesized in the presence of AIBN (2–5 wt %, 70°C) with a yield of up to 34% and a molecular mass of up to 11.5 × 10³. In the presence of cationic catalysts (Me₃SiCl, the LiBF₄-dimethoxyethane system, and BF₃ · OEt₂), 1,4-bis[2-(N-vinyl)pyrrolyl]benzene gives macromolecules with alternating 1,2-pyrrolene and ethylidene units in the backbone with yields of 80, 44, and 33%, respectively. The polymers demonstrate paramagnetic and luminescent properties.     

Free radical ring‐opening polymerization of cyclic allylic sulfides: Liquid monomers with low polymerization volume shrinkage

The free radical polymerization of four methylated cyclic allylic sulfides was examined with reference to their polymerization volume shrinkage and the effect of ring size on reactivity. The compounds examined were 2‐methyl‐5‐methylene‐1,3‐dithiane ( 5 ) (solid), 2‐methyl‐6‐methylene‐1,4‐dithiepane ( 6 ) (liquid), 6‐methyl‐3‐methylene‐1,5‐dithiacyclooctane ( 7 ) (liquid), and 6,8‐dimethyl‐3‐methylene‐1,5‐dithiacyclooctane ( 8 ) (liquid). The monomers were stable materials not requiring any special handling or storage conditions. They were polymerized in bulk using thermal azobisisobutyronitrile (AIBN, VAZO88) and photochemical initiators (Ciba DAROCUR 1173) and in benzene solutions (AIBN, 70 °C). The six‐membered ring monomer 5 was unreactive whereas seven‐membered ring monomer 6 polymerized to high conversion in bulk. In addition, 6 did not polymerize in benzene solution at 70 °C at [ 6 ] = 1.25M. Eight‐membered ring monomers 7 and 8 polymerized in bulk to complete conversion with thermal and photochemical initiators to give lightly crosslinked materials. Near complete conversion to soluble polymers could be obtained in solution polymerizations in benzene. Soluble polymers were also obtained in photochemical initiated bulk polymerizations by lowering initiator concentrations or length of irradiation. The methyl substituent had no effect on which allylic carbon–sulfur bond fragmented in the ring‐opening step. The polymerization volume shrinkages of monomers 7 and 8 were 1.5 and 2.4% respectively and together with monomer 4 (1.5–2.0% shrinkage) are the best available liquid free radical ring‐opening monomers that can be polymerized in bulk at room temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 202–215, 2001     

Synthesis and polymerization of 7,7-bis(alkoxycarbonyl)-1,4-benzoquinone methides

7,7-Bis(methoxycarbonyl)-, 7,7-bis(ethoxycarbonyl)-, and 7,7-bis(isopropoxycarbonyl)-1,4-benzoquinone methides ( 4a, 4b , and 4c ) were successfully prepared as pure, isolable yellow-orange needles. The values of the first reduction potential for 4a, 4b , and 4c were measured in dichloromethane containing tetrabutylammonium perchlorate by cyclic voltammetry to be −0.54, −0.55, and −0.55 V, respectively, indicating that the alkyl groups do not significantly affect their electron-accepting properties. An anionic initiator butyllithium induced the homopolymerizations of 4a–c at 0°C, but a cationic initiator boron trifluoride etherate did not of 4a–c at 0°C. Compounds 4a and 4b homopolymerized with a radical initiator 2,2′-azobis(isobutyronitrile) (AIBN), but 4c did not, probably due to a larger steric hindrance effect of the isopropyl group compared with methyl and ethyl groups. Homopolymerizable compound 4a copolymerized with styrene in benzene in the presence of AIBN in a random fashion to give the monomer reactivity ratios r₁ ( 4a ) = 2.40 ± 0.40 and r₂ (styrene) = 0.01 ± 0.02 at 60°C and the Q and e values of 4a were 21.2 and +1.13, respectively, indicating that 4a is a highly conjugative and electron-accepting monomer, while the nonhomopolymerizable compound 4c copolymerized with styrene in a perfectly alternating fashion in benzene in the presence of AIBN at 60°C. No copolymerizations of 4a or 4c with 7,7,8,8-tetracyanoquinodimethane took place in dichloromethane in the presence of AIBN at 60°C. © 1996 John Wiley & Sons, Inc.     

Novel anionic polyaddition of 2‐trifluoromethylacrylate by double Michael reaction with ethyl cyanoacetate

Novel fluorinated polymer synthesis with anionic polyaddition by double Michael addition reaction of 2‐trifluoromethylacrylate derivatives with ethyl cyanoacetate (ECA) was proposed. Diaddition product of ECA with phenyl 2‐trifluoromethylacrylate was yielded in high yield by the catalysis of sodium ethoxide in tetrahydrofuran at 60 °C. Sodium hydroxide catalyzed double Michael addition reaction also produced diaddition product in high yield. Novel anionic polyaddition of 1,4‐phenylene bis(2‐trifluoromethylacrylate) [CH₂?C(CF₃)COOC₆H₄OCOC(CF₃)?CH₂] (PBFA) with ECA afforded the polymer of 1.2 × 10⁴ as the highest molecular weight. The isolated polymer gave the polymer of 2.8 × 10⁴ as a molecular weight by the reaction of the isolated polymer with PBFA in the presence of sodium ethoxide; which proved that the polymer end groups were mainly ECA moieties. The reaction mechanism that the proton abstraction from ECA followed by the addition of 2trifluoromethylacrylate was proposed. The reaction of acetylacetone with PBFA was also examined to give the polymer of 7.6 × 10³ as the highest molecular weight catalyzed by sodium hydroxide at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5698–5708, 2009     

Organometallic polymers. XXIX. Synthesis and characterization of ferrocene-containing siloxane polymers from bis(dimethylamino)silane–disilanol condensation

A new monomer, 1,1′-bis(dimethylaminodimethylsilyl)ferrocene, was synthesized by two routes and polymerized with three aryl disilanols: dihydroxydiphenylsilane, 1,4-bis(hydroxydimethylsilyl)benzene, and 4,4′-bis(hydroxydimethylsilyl)biphenyl, yielding three different polysiloxanes. Melt polymerizations carried out at 1 torr pressure and 100°C resulted in the highest molecular weight polymers. Intramolecular cyclization competed with intermolecular chain extension in polymerization of the bis(aminosilane) with dihydroxydiphenylsilane, resulting in isolation of a bridged derivative, 1,3,5-trisila-2,4-dioxa-1,1,5,5-tetramethyl-3,3-diphenyl[5]ferrocenophane. Cyclization did not compete significantly during the formation of polymers from this bisaminosilane and the two remaining diols, as evidenced by higher yields and greater molecular weights. These polymers could be cast as tough flexible films, and fibers could be drawn from their melts. TGA and DSC data showed the polymer formed from 1,1′-bis(dimethylaminodimethylsilyl)ferrocene and 1,4-bis(hydroxydimethylsilyl)benzene to be at least as thermally stable as an arylene siloxane polymer which differed from the ferrocenylsiloxane structure only in the replacement of the ferrocene moiety with a p-substituted phenylene linkage. The ferrocene-containing polymers were generally hydrolytically stable under conditions of refluxing THF–H₂O(10 : 1) for 1 hr. The polymer-forming reaction was found to follow second-order kinetics, and the specific rate constants for formation of two of the polymers were measured.     

Fundamental studies of grafting reactions in free radical copolymerization. II. Grafting of styrene,acrylate, and methacrylate monomers onto cis-polybutadiene using AIBN initiator in solution polymerization

Grafting can be initiated by primary and/ or polymer radical attack on the backbone polymer and it is well known that AIBN does not readily promote grafting, even when using poly-butadiene. We have studied the grafting of several different monomers onto cis-polybuta-diene using AIBN initiator and find dramatically different results among the monomers. As expected, styrene grafts at very low levels due to the inactivity of the initiator radicals and the polystyryl radicals. Methacrylate monomer grafts at a slightly higher level due to its more reactive polymer radical, while acrylate monomer readily grafts onto the poly-butadiene because polyacrylate radicals are quite reactive. The use of a kinetic model allowed the evaluation of rate coefficients for graft site initiation to be in the relative order of 0.1 : 1.0 : 10.0 (L/mol/s) for styrene:methacrylate:acrylate monomers. The model also pro-vided successful interpretations of the grafting data and its dependence upon the concen-trations of monomer, initiator, and backbone polymer. Due to the relatively higher reactivity of the polyacrylate radicals, the benzene solvent acted as a chain transfer agent in this system. This affected the molecular weight of both free and grafted acrylate polymer and also surpressed the graft level. Polyacrylate radicals attack the cis-polybutadiene backbone by abstracting an allylic hydrogen and also adding across the residual double bond. The latter mechanism is responsible for the majority of the grafting; the hydrogen abstraction leads to relatively inactive radicals which cause a retardation in the overall reaction rate. © 1995 John Wiley & Sons, Inc.