Branched and Self-Crosslinkable Poly(methyl methacrylate)s Prepared via One-Pot Synthesis in Aqueous Emulsion

An approach to the synthesis of highly branched vinyl copolymers containing thiol and C=C crosslinking groups is proposed. This method was exemplified by the emulsion copolymerization of methyl methacrylate (MMA) and 1,6-hexanediol diacrylate (HDDA) with 2-mercaptoethyl sulfide (MES) as chain transfer agent at 70°C with 4,4′-azobis(4-cyanovaleric acid) (ACVA) as the initiator. The resulting highly branched copolymers contain both thiol and acryloyl groups. The apparent M_w (by SEC) of the resulting copolymers increased with increasing ACVA concentration, whereas the pendent acryloyl and -SH groups decreased from 6.4% to 0.8% (relative to MMA units) and 45 ×10^?5 to 5 × 10^?5 mol/g, respectively. The copolymers of MMA could be self-crosslinked thermally or by exposure to UV irradiation. The gel fraction of the thermally treated samples decreased from 46% to 7.2%, with the increasing of ACVA in the polymer synthesis, while the gel fraction of UV irradiated samples changed only slightly around 70%.     

Solid polymer electrolytes I,preparation, characterization,and ionic conductivity of gelled polymer electrolytes based on novel crosslinked siloxane/poly(ethylene glycol) polymers

A series of crosslinked siloxane/poly(ethylene glycol) (Si–PEG) copolymers were synthesized from the reactive methoxy‐functional silicone resin (Si resin) and PEGs with different molecular weights via two kinds of crosslinking reactions during an in situ curing stage. One of the crosslinking reactions is the self‐condensation between two methoxy groups in the Si resin, and another one is an alkoxy‐exchange reaction between the methoxy group in the Si resin and the OH group in PEG. The synthesized crosslinked copolymers were characterized by Fourier transform infrared spectroscopy, DSC, and ¹³C NMR. The crosslinked copolymers were stable in a moisture‐free environment, but the Si? O? C linkages were hydrolyzed in humid conditions. The gel‐like solid polymer electrolytes (SPEs) were prepared by impregnating these crosslinked Si–PEG copolymers in a propylene carbonate (LiClO₄/PC) solution. The highest conductivity reached 2.4 × 10^?4 S cm^?1 at 25 °C and increased to 8.7 × 10^?4 S cm^?1 at 85 °C. The conductivities of these gel‐type SPEs were affected by the content of LiClO₄/PC, the molecular weights of PEGs, and the weight fraction of the Si resin. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2051–2059, 2004     

Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic dithiocarbonate structure

A styrene‐based monomer having a five‐membered cyclic dithiocarbonate structure, 4‐vinylbenzyl 1,3‐oxathiolane‐2‐thione‐5‐ylmethyl ether (VBTE), was synthesized from 4‐vinylbenzyl glycidyl ether (VBGE) and carbon disulfide in the presence of lithium bromide in 86% yield. Radical polymerization of VBTE in dimethyl sulfoxide by 2,2′‐azobisisobutyronitrile was carried out at 60 °C to afford the corresponding the polymer, polyVBTE, in 64% yield. PolyVBTE with number‐averaged molecular weight higher than 31,000 was obtained. The glass transition temperature (T_g) and 5 wt % decomposition temperature (T_d5) of the polyVBTE were evaluated to be 66 and 264 °C under nitrogen atmosphere by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBTE repeating unit could also be obtained via polymer reaction, that is, a lithium bromide‐catalyzed addition of carbon disulfide to a polyVBGE prepared from a radical polymerization of VBGE. Copolymerization of VBTE and styrene with various compositions efficiently gave copolymers of VBTE and styrene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Functionalization of polyethylene based on metallocene catalysis and its application to syntheses of new graft copolymers possessing polar polymer segments

The control of hydroxylated polyethylene (PE) structures was investigated in the copolymerization of ethylene with allyl alcohol or 10-undecen-1-ol with a specific metallocene, methylaluminoxane, and trialkyl aluminum catalyst system through changes in the copolymerization conditions. The incorporation of allyl alcohol into the PE backbones was controllable through changes in the trialkyl aluminum, leading to terminally hydroxylated PE or a copolymer possessing hydroxyalkyl side chains. The copolymerization of ethylene with 10-undecen-1-ol gave copolymers with hydroxyalkyl side chains of various contents with a variety of molecular weights through changes in the copolymerization conditions. The obtained copolymers were useful as macroinitiators that allowed polar polymer segments to grow on the PE backbones, leading to the creation of graft copolymers that possessed PE and polar polymer segments. In this way, polyethylene-g-poly(propylene glycol) (PE-g-PPG) and polyethylene-g-poly(ϵ-caprolactone) (PE-g-PCL) were synthesized. The ¹³C NMR analysis of PE-g-PPG suggested that all the hydroxyl groups were consumed for propylene oxide polymerization, and transmission electron microscopy demonstrated nanoorder phase separation and indistinct phase boundaries. ¹³C NMR and gel permeation chromatography analyses indicated the formation of PE-g-PCL, in which 36–80 mol % of the hydroxyl groups worked as initiators for ϵ-caprolactone polymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3657–3666, 2003     

Synthesis and characterization of a self-crosslinkable polymer from cardanol: Autooxidation of poly(cardanyl acrylate) to crosslinked film

Cardanyl acrylate (CA), a monomer that yields crosslinkable copolymers, was synthesized by the reaction of cardanol with acryloyl chloride. A linear polymer was obtained by solution polymerization of the monomer in toluene using 0.8% azobisisobutyronitrile as initiator. Upon removal of solvent, the polymer undergoes crosslinking on exposure to air (or UV light) to give an insoluble transparent film. However, in bulk and suspension polymerization the polymer undergoes in situ crosslinking in the absence of any crosslinking agent. The polymer was characterized by IR, NMR, DSC, and GPC. The crosslinking reaction of soluble polymer on exposure to air at ambient conditions was explained by the hydroperoxide theory. © 1993 John Wiley & Sons, Inc.     

Kinetics of crosslinking reactions. 1. Reaction rate of intramolecular crosslinkings by using a soluble microgel

Soluble microgels with several pendant vinyl groups were synthesized by radical copolymerization of methyl methacrylate (MMA) with p-divinyl benzene (p-DVB). The polymerization conditions used for intramolecular crosslinking of microgels were chosen from gel permeation chromatograph (GPC) measurements of the reaction products. The rate constant of intramolecular crosslinking (k_pⁱ) was estimated from the changes in the concentration of pendant vinyl groups of microgel by using photometrical measurements at 30°C assuming a unimolecular termination mechanism of polymer radicals. As a result, k_pⁱ showed larger values than k_p of styrene and depended strongly on the internal structure of the microgels.     

Tapered copolymers of styrene and 4-vinylbenzocyclobutene via carbanionic polymerization for crosslinkable polymer films

Well-defined polystyrene homopolymers with surface-adhesive triethoxysilyl end group were synthesized via living carbanionic polymerization, epoxide end-functionalization and subsequent hydrosilylation with triethoxysilane. Grafting-to performance of polymers with various molecular weight (M_n = 3000–14,000 g mol⁻¹) to a silicon surface was examined in dependence of reaction time, polymer concentration, solvent and number of alkoxysilyl end groups. Crosslinkable polymers for surface modification were synthesized by statistical carbanionic copolymerization of 4-vinylbenzocyclobutene (4-VBCB) and styrene, followed by epoxide end-functionalization and triethoxysilane modification (M_n = 4000–14,000 g mol⁻¹). The copolymers were characterized by ¹H-NMR, THF-SEC, and matrix-assisted laser desorption and ionization time-of-flight mass spectrometry. In situ ¹H-NMR kinetic studies in cyclohexane-d₁₂ provided information regarding the monomer gradient in the polymer chains, with styrene being the more reactive monomer (r_s = 2.75, r_4-VBCB = 0.23). Thin polymer films on silicon wafers were prepared by grafting-to surface modification under conditions derived for the polystyrene homopolymer. The traceless, thermally induced crosslinking reaction of the benzocyclobutene units was studied by DSC in bulk as well as in 3–6 nm thick polymer films. Crosslinked films were analyzed by atomic force microscopy, ellipsometry, and nanoindentation, showing smooth polymer films with an increased modulus. © 2019 The Authors. Journal of Polymer Science published by Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 181–192     

Synthesis and characterization of functional gradient copolymers of allyl methacrylate and butyl acrylate

Functional spontaneous gradient copolymers of allyl methacrylate (A) and butyl acrylate (B) were synthesized via atom transfer radical polymerization. The copolymerization reactions were carried out in toluene solutions at 100 °C with methyl 2‐bromopropionate as the initiator and copper bromide with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst system. Different aspects of the statistical reaction copolymerizations, such as the kinetic behavior, crosslinking density, and gel fraction, were studied. The gel data were compared with Flory's gelation theory, and the sol fractions of the synthesized copolymers were characterized by size exclusion chromatography and nuclear magnetic resonance spectroscopy. The copolymer composition, demonstrating the gradient character of the copolymers, and the microstructure were analyzed. The experimental data agreed well with data calculated with the Mayo–Lewis terminal model and Bernoullian statistics, with monomer reactivity ratios of 2.58 ± 0.37 and 0.51 ± 0.05 for A and B, respectively, an isotacticity parameter for A of 0.24, and a coisotacticity parameter of 0.33. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5304–5315, 2006     

Synthesis and characterization of original alternated fluorinated copolymers bearing glycidyl carbonate side groups

A vinyl ether bearing a carbonate side group (2‐oxo‐1,3‐dioxolan‐4‐yl‐methyl vinyl ether, GCVE) was synthesized and copolymerized with various commercially available fluoroolefins [chlorotrifluoroethylene (CTFE), hexafluoropropylene (HFP), and perfluoromethyl vinyl ether (PMVE)] by radical copolymerization initiated by tert‐butyl peroxypivalate. Although HFP, PMVE, and vinyl ether do not homopolymerize under radical conditions, they copolymerized easily yielding alternating poly(GCVE‐alt‐F‐alkene) copolymers. These alternating structures were confirmed by elemental analysis as well as ¹H, ¹⁹F, and ¹³C NMR spectroscopy. All copolymers were obtained in good yield (73–85%), with molecular weights ranging from 3900 to 4600 g mol^?1 and polydispersities below 2.0. Their thermogravimetric analyses under air showed decomposition temperatures at 10% weight loss (T_d,10%) in the 284–330°C range. The HFP‐based copolymer exhibited a better thermal stability than those based on CTFE and PMVE. The glass transition temperatures were in the 15–65°C range. These original copolymers may find potential interest as polymer electrolytes in lithium ions batteries. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of ethylene/propylene elastomers containing a terminal reactive group: The combination of metallocene catalysis and control chain transfer reaction

This article discusses a chemical route to prepare new ethylene/propylene copolymers (EP) containing a terminal reactive group, such as ?‐CH₃ and OH. The chemistry involves metallocene‐mediated ethylene/propylene copolymerization in the presence of a consecutive chain transfer agent—a mixture of hydrogen and styrene derivatives carrying a CH₃ (p‐MS) or a silane‐protected OH (St‐OSi). The major challenge is to find suitable reaction conditions that can simultaneously carry out effective ethylene/propylene copolymerization and incorporation of the styrenic molecule (St‐f) at the polymer chain end, in other words, altering the St‐f incorporation mode from copolymerization to chain transfer. A systematic study was conducted to examine several metallocene catalyst systems and reaction conditions. Both [(C₅Me₄)SiMe₂N(^t‐Bu)]TiCl₂ and rac‐Et(Ind)₂ZrCl₂, under certain H₂ pressures, were found to be suitable catalyst systems to perform the combined task. A broad range of St‐f terminated EP copolymers (EP‐t‐p‐MS and EP‐t‐St‐OH), with various compositions and molecular weights, have been prepared with polymer molecular weight inversely proportional to the molar ratio of [St‐f]/[monomer]. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1858–1872, 2005     

Cationic copolymerization of isobutene and conjugated small-ring dienes

1-Methyl-3-methylenecyclobutene (MMCB) and 1,2-dimethylenecyclobutane (DMCB) copolymerized readily with isobutene with aluminum chloride as initiator in methyl chloride solution at temperatures from ?95 to ?78°C. No polymers were obtained with methylenecyclobutene (MCB) under similar conditions. The copolymerization of MMCB with isobutene took place through a 1,5-addition reaction while that of DMCB through both 1,2- and 1,4-addition reactions. Large amounts of gel were present in the copolymers obtained from DMCB if the reaction was carried to high conversion. The commonly observed effects of dienes (i.e., rate retardation and molecular weight depression) on cationic copolymerization reactions were observed but to a much higher degree with these small ring dienes. The thermal crosslinking behavior of the resulting copolymers was investigated. In conjunction with the copolymerization studies, homopolymers of MMCB, DMCB, and 3,3-dimethyl-1-isopropylidene-2-methylenecyclobutane (IMCB) were prepared and their chemical structures examined.     

Copolymerization and Copolymers of Styrene N-(2,4,6-Tribromophenyl) Maleimide with Styrene

Kinetic studies of the free radical copolymerization of N-(2,4,6- tribromophenyl) maleimide (TBPMI) with styrene in solution were carried out. The thermal and flammability characteristics of the resulting polymers were also investigated. The monomer reactivity ratios were found to be r ₁ = 0.006 ± 0.0026 (TBPMI) and r ₂ = 0.086 ± 0.0023, and the activation energy of the copolymerization reaction was E_a = 73.6 kJ/mol. The resulting copolymers showed an alternating structure regardless to the monomer feed composition. The molecular weights of the copolymers obtained are relatively high and gradually increase by increasing the TBPMI fraction in the feed, whereas the T_g's showed similar values (540 K) for the equimolar ratio of the comonomers. The course of copolymerization up to high conversion was followed by microcalorimetry and is characterized by a remarkable increase of the initial reaction rate as the fraction of TBPMI was increased; it is also higher at higher total monomer concentrations. However, the overall conversion decreases when the fraction of TBPMI is higher than the equimolar ratio. The thermal stability of the alternating copolymers is higher than that of polystyrene, and their mixture showed appreciable flame-retardant properties, as demonstrated by a limiting oxygen index measurement.     

A novel approach to synthesis of functional CPVC and CPE or graft copolymers—in situ chlorinating graft

A new process of graft copolymerization of poly(vinyl chloride) (PVC) and polyethylene (PE) with other monomers was developed. The grafted chlorinated poly(vinyl chloride) (CPVC) and chlorinated polyethylene (CPE) were synthesized by in situ chlorinating graft copolymerization (ISCGC) and were characterized. Convincing evidence for grafting and the structure of graft copolymers was obtained using FT‐IR, ¹H‐NMR, gel permeation chromatography (GPC), and the vulcanized curves. Their mechanical properties were also measured. The results show that the products have different molecular structure from those prepared by other conventional graft processes. Their graft chains are short, being highly branched and chlorinated. The graft copolymers have no crosslinking structure. The unique molecular structure will make the materials equipped with special properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

A novel catalytic system—NdCl3 · HMPA/AI(i‐6u)3 for copolymerization of isoprene and styrene

Co polymerization of styrene (St) and isoprene (IP) was carried out with a catalyst system composed of anhydrous lanthanide chloride hexamethyl phosphor amide complex (LnC1₃‐HMPA) and aluminum organic compound (AOC). Among the catalysts examined, catalyst NdC1₃*HMPA/Al(i‐Bu)₃ showed a high activity in the copolymerization under certain conditions giving copolymers (5%‐158 St content) with high cis‐1, 4 microstructure in IP Units (>95%). The effects of HMPA/Nd molar ratio, Al/Nd molar ratio, monomer/Nd molar ratio, St feed ratio, and the reaction time on copolymerization were examined with this catalytic system. The obtained copolymers were characterized by ¹H and ¹³C NMR spectroscopies and gel‐permeation chromatography (GPC).     

Further Studies on the Anionic Copolymerization of Styrene and Glycidyl Methacrylate in Toluene

Sequential anionic copolymerization of styrene and glycidyl methacrylate (GMA) was performed with the protection of argon under normal pressure, where styrene, GMA, toluene, THF, n-butyllithium and a small amount of lithium chloride (LiCl) were used as first monomer, second monomer, solvent, polar reagent, initiator and additive, respectively. Polystyrene-b-poly(glycidyl methacrylate) diblock copolymers (PS-b-PGMA) with well-defined structure and narrow molecular weight distribution were prepared by the copolymerization reaction of poly(styryl)lithium with GMA under certain temperatures. The copolymers were characterized using gel permeation chromatography (GPC), ¹H-NMR, ¹³C-NMR, thin layer chromatography (TLC) and hydrochloric acid-dioxane argentimetric methods. The effects of additives, copolymerization temperature and THF dosage on the copolymerization were studied. No chain transfer reaction of anionic polymerization of styrene in toluene was observed. Slightly broader molecular weight distribution of PS-b-PGMA was observed with the increase the GMA repeat units. Using THF/toluene blend solvent could reduce the polydispersity index (M _w /M _n ) and dissolve the copolymer better than toluene alone. Lower temperature (< -40°C) and LiCl are required to prepare PS-b-PGMA with narrower molecular weight distribution.     

Synthesis of methacrylate polymer bearing cyanate groups and its chemoselective reaction with amines

A novel reactive polymer containing cyanate groups in the side chain was prepared by free radical polymerization of a cyanate‐containing monomer, 2‐(4‐cyanatophenyl)ethyl methacrylate ( 1 ). The monomer 1 and its polymer, poly[2‐(4‐cyanatophenyl)ethyl methacrylate] (PCPMA), were stable under the air for a long period. The copolymerization of 1 and methyl methacrylate provided the corresponding copolymers with various cyanate contents. The availability of the cyanate‐containing polymers as a reactive polymer was investigated. Model reaction using 4‐cyanatotoluene revealed that a cyanate group reacted with aliphatic amines, whereas no reaction occurred in the presence of water, alcohols, and aromatic amines under mild conditions. Post‐functionalization of PCPMA was demonstrated using aliphatic amines or diamines. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 699–706     

Preparation of Graft Copolymers By Means of Uv Photolysis of Poly(Methyl Vinyl Ketone) and Reverse Osmosis Performance of the Membranes from the Oximes of the Copolymers

ABSTRACT

An attempt was made to prepare a graft copolymer consisting of poly(methyl vinyl ketone) (PMVK) as a backbone chain and polyacrylonitrile, poly(4-vinylpyridine), or polystyrene as a graft chain by UV irradiation of a solution of PMKV in the presence of acrylonitrile, 4-vinylpyridine, or styrene. the influence of reaction conditions on the yield, composition, and viscosity of the resulting graft copolymers was investigated. It was suggested from NMR and gel permeation chromatography that those graft copolymers contained a high molecular weight fraction of narrow distribution and block copolymers as well. the reverse osmosis membranes derived from the oxime and amidoxime of the graft copolymers showed a characteristic performance of exhibiting a maximal difference between rejections against NaCl and CoCl₂ at a certain addition ratio of crosslinking agent, which was not observed in the membranes from copolymers by conventional radical copolymerization. the relationship between these phenomena and the branching structure of the graft copolymers was discussed.     

NON-LINEAR LEAST SQUARE CURVE FITTING OF COPOLYMERIZATION MODELS TO THE ALTERNATING TRIAD FRACTION OF COPOLYMERS OF STYRENE AND CITRACONIC ANHYDRIDE,AND COPOLYMERS OF STYRENE AND MALEIC ANHYDRIDE PREPARED IN N,N-DIMETHYLFORMAMIDE

Copolymers of styrene (ST) and citraconic anhydride (α-methylmaleic anhydride) (CA) were prepared in a very polar solvent, N,N-dimethylformamide (DMF), at 50.0°C with AIBN. The monomer unit triad fractions were determined by ¹³C NMR in acetone-d ₆ solution. Non linear least square (NLLS) curve fitting was performed for the copolymerization models of the terminal model, the penultimate unit effect model, the complex participation model, the complex dissociation model, and the so-called comppen model. The theoretical equations for the ST-centered alternating triad mole fraction were fitted by NLLS minimization routine to the triad fraction data of the ST-CA copolymers and that of the ST-maleic anhydride (MA) copolymers prepared in identical polymerization conditions. It was found that for rigidly alternating copolymers of ST-MA, the difference among the copolymerization models disappeared and all models merged together. The difference among the copolymerization models were somewhat more apparent for less alternating copolymers of ST-CA copolymers. The sum of squares values indicated that the copolymerization models, which involved some complex participation, fit the data better with the comppen model. This was a combination of a complex participation and penultimate unit effects, which performed best.