Grafting reactions of vinyl acetate onto poly[(vinyl alcohol)-co-(vinyl acetate)]

The grafting preference of vinyl acetate onto the methine carbon of poly(vinyl alcohol) (PVOH) versus the acetate group of poly(vinyl acetate) (PVAc) was determined as part of an attempt to prepare novel branched PVOH from partially hydrolyzed PVAc. The results showed long chain grafting on the acetate groups of the PVAc units rather than the methine carbons of the PVOH or PVAc units. Decreasing the monomer or initiator concentration decreased the molecular weight of the graft copolymer formed. Of the initiators studied, ammonium persulfate gave the largest increase in copolymer molecular weight. Both hydrolysis and reacetylation combined with gel permeation chromatography (GPC) and ¹³C-NMR of the fully hydrolyzed material were used to estimate the number and location of grafts. © 1996 John Wiley & Sons, Inc.     

Block copolymers of poly(ethylene oxide) and poly(vinyl alcohol) synthesized by the RAFT methodology

A methodology for the synthesis of well‐defined poly(ethylene oxide)‐block‐poly(vinyl alcohol) (PEO‐b‐PVA) and PVA‐b‐PEO‐b‐PVA polymers was reported. Novel xanthate end‐functionalized PEOs were synthesized by a series of end‐group transformations. They were then used to mediate the reversible addition–fragmentation chain transfer polymerization of vinyl acetate to obtain well‐defined poly(ethylene oxide)‐b‐poly(vinyl acetate) (PEO‐b‐PVAc) and PVAc‐b‐PEO‐b‐PVAc. When these block copolymers were directly hydrolyzed in methanol solution of sodium hydroxide, polymers with brown color were obtained, which was due to the formation of conjugated unsaturated aldehyde structures. To circumvent these side reactions, the xanthate groups were removed by adding a primary amine before hydrolysis and the products thus obtained were white powders. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy and FT‐IR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1901–1910, 2009     

Solid‐state 13C and 129Xe NMR study of poly(vinyl alcohol) and poly(vinyl alcohol)/lactosilated chitosan gels

Dry and hydrated poly(vinyl alcohol) (PVA) gels with 55% (a‐PVA) and 61% (s‐PVA) syndiotacticity and related PVA/lactyl chitosan (LC) blends have been investigated with ¹²⁹Xe and cross‐polarization/magic‐angle‐spinning ¹³C NMR techniques. Although the dry gels exhibit two broad ¹²⁹Xe resonances in the slow‐to‐intermediate exchange limit, both hydrated gels show three resonances. The corresponding dry blends exhibit two signals, the chemical shifts and line widths of which change with respect to those of pure PVA, whereas one (a‐PVA/LC) or two (s‐PVA/LC) signals appear in the spectra of the hydrated blends. A comparative analysis of the data demonstrates that LC rearranges the domains of the polymeric matrix in both the dry and hydrated blends according to the syndiotacticity of the PVA chains. Information on the molecular motions of the amorphous and swollen polymeric domains in the kilohertz range has been obtained from an analysis of the spin‐lattice relaxation times. These data indicate that the dynamics and arrangement of the PVA chains in the gels are strongly affected by their tacticity and the addition of the copolymer LC. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3123–3131, 2003     

Role of grafting in the emulsion polymerization of vinyl acetate with poly(vinyl alcohol) as an emulsifier. I. Effect of the degree of blockiness on the kinetics and mechanism of grafting

The role of grafting in particle nucleation during the emulsion polymerization of vinyl acetate with partially hydrolyzed poly(vinyl alcohol) (PVA) as an emulsifier and potassium persulfate as an initiator was investigated. The polymerizations were carried out in batch with a low solids (10%) recipe. An automated reaction calorimeter (Mettler RC1) was used for the direct monitoring of the kinetics of emulsion polymerizations with three medium molecular weight PVAs differing in their degrees of blockiness (Poval 217EE > 217E > 217). Smith–Ewart case 1 kinetics (average number of free radicals per particle < 0.5) were followed in all cases, and no constant rate in interval II was observed. Contrary to what was expected, a nonlinear relationship was observed between the rate of polymerization (R_p) and the number of particles (N_p). At R_{p max,} N_p (217E) > N_p (217EE) > N_p (217), and the final N_p was independent of the degree of blockiness of PVA. The particle size distributions were broad (particle diameter = 20–100 nm) and bimodal. On the basis of these data, we concluded that particle nucleation was continuous and was accompanied by extensive limited aggregation during the particle growth stages. The evolution of the amounts of grafted PVA and poly(vinyl acetate) (PVAc) were determined in polymerizations employing the two PVAs differing the most in blockiness (Poval 217EE and 217). The grafted PVAc followed similar profiles, increasing with conversion, particularly near the end of the two reactions. The amounts of grafted PVAc were about the same in the final latexes (37–39%). In contrast, the grafting of PVA was nearly complete by the time monomer droplets had disappeared in each reaction (25% conversion). However, the extent of grafting differed significantly, with the blockier PVA having about one‐third the grafting of the more random PVA (～10% vs ～30%). In these low solids recipes, grafting appeared to be primarily a solution event, occurring predominantly in the aqueous phase and not at the particle/water interface, as was previously speculated. The PVAc grafts grew until the molecules became water‐insoluble and precipitated, forming polymer particles. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3633–3654, 2001     

Low temperature suspension polymerization of vinyl acetate using 2,2′-azobis(2,4-dimethylvaleronitrile) for the preparation of high molecular weight poly(vinyl alcohol) with high yield

 To obtain high molecular weight (HMW) poly(vinyl acetate) (PVAc) with high conversion and high linearity for a precursor of HMW poly(vinyl alcohol) (PVA), vinyl acetate (VAc) was suspension-poly-merized using a low-temperature initiator, 2,2′-azobis (2,4-dimethyl-valeronitrile) (ADMVN), and the effects of polymerization conditions on the polymerization behavior and molecular structures of PVAc and PVA prepared by saponifying PVAc were investigated. On the whole, the experimental results well corres-ponded to the theoretically predicted tendencies. Suspension polymerization was slightly inferior to bulk polymerization in increasing molecular weight of PVA. In contrast, the former was absolutely superior to the latter in increasing conversion of the polymer, which indicated that the suspension polymerization rate of VAc was faster than the bulk one. These effects could be explained by a kinetic order of ADMVN concentration calculated by initial-rate method and an activation energy difference of polymerization obtained from the Arrhenius plot. Suspension polymerization at 30 °C by adopting ADMVN proved to be successful in obtaining PVA of HMW (number-average degree of polymerization (P _n)): (4200–5800) and of high yield (ultimate conversion of VAc into PVAc: 85–95%) with diminishing heat generated during polymerization. In the case of bulk polymerization of VAc at the same conditions, maximum P _n and conversion of 5200–6200 and 20–30% was obtained, respectively. The P _n, lightness, and syndiotacticity were higher with PVA prepared from PVAc polymerized at lower temperatures. Received: 10 February 1998 Accepted: 15 April 1998     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Radiation effects on the thermal degradation of poly(vinyl chloride) and poly(vinyl alcohol)

Radiation effects on the formation of conjugated double bonds in the thermal degradation of poly(vinyl chloride) (PVC) and poly(vinyl alcohol) (PVA) were investigated. Thin films of PVC and PVA were either irradiated with γ-rays at ambient temperature (pre-irradiation) and then subjected to thermal treatment, or irradiated at elevated temperatures (in situ irradiation). An extensive enhancement of the thermal degradation was observed for the pre-irradiation of the PVC films, which was more effective than the effect of the in situ irradiation at the same absorption dose. For the PVA degradation, however, the effect of the in situ irradiation was larger than that of the pre-irradiation. The results were explained and related mechanisms were discussed based on radiation-induced chemical reactions and their individual contributions to the thermal degradation behaviors of the two polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3089–3095, 1998     

Synthesis and characters of hyperbranched poly(vinyl acetate) by RAFT polymeraztion

Reversible addition-fragmentation chain transfer (RAFT) polymerization of VAc in the presence of ECTVA, which capable of both reversible chain transferable through a xanthate moiety and propagation via a vinyl group, led to highly branched copolymers by a method analogous to self-condensing vinyl polymerization (SCVP). The ECTVA acted as a vinyl acetate AB^∗ inimer. It was copolymerized with vinyl acetate (VAc) in ratios selected to tune the distribution and length of branches of resulting hyperbranched poly(vinyl acetate). The degree of branching increased with chain ECTVA concentration, as confirmed by NMR spectroscopy. The polymer structure was characterized via MALDI–TOF. Retention of the xanthate compound during the polymerization was evidenced by successful chain extension of a branched (PVAc) macroCTA by RAFT polymerization. The branched PVAc led to better dissolution as compared to linear PVAc, an effect attributed primarily to an increased contribution of end groups.     

New chemical hydrogels based on poly(vinyl alcohol)

The syntheses of two new types of chemical hydrogels based on poly(vinyl alcohol), PVA, are reported. Common to both synthetic routes is the preparation of a telechelic PVA (tel-PVA) obtained by periodate splitting of the vicinal diol units present in few percent along the chain. tel-PVA was then used as crosslinking agent with chitosan and PVA in two simple reactions in aqueous phase such as reductive alkylation of chitosan and acetalyzation of PVA. Both reactions yielded firm wall-to-wall networks showing marked differences in their swelling capability. © 1996 John Wiley & Sons, Inc.     

Influence of additives on model emulsion polymerization of vinyl acetate (VAc) using poly(vinyl alcohol) (PVA) as a protective colloid

To clarify the influence of additives on the grafting phenomenon as well as the particle behavior more precisely, we carried out a model emulsion polymerization of vinyl acetate (VAc) in a 1% aqueous solution with ammonium persulfate (APS) using poly (vinyl alcohol) (PVA) as a protective colloid in the presence of additives. The addition of alcohol to the system remarkably affected the particle formation, especially grafting. This is thought to be attributed to competition between hydrogen abstraction from PVA and alcohol with a sulfate radical. Especially, the addition of acetone to the system decreased grafting to a great extent, resulting in an increase in the particle size together with an increase in the number of polymer molecules in a polymer particle. This result is thought to arise from a combination of electron abstraction from acetone with a sulfate radical and the chain-transfer reaction of the propagation radical with acetone.     

Formation of poly(vinyl alcohol)–iodine complexes in solution

The effect of the dissolved state of poly(vinyl alcohol) (PVA) molecules in water on the color development due to PVA–iodine complexes was investigated at each given PVA and iodine concentration using two kinds of syndiotactic-rich PVA (S-PVA) which are unstable in water because of the formation of intermolecular hydrogen bonds and form the complex easily. In the reaction mixtures prepared by mixing PVA solutions and an iodine solution, the color development was constant and independent of standing time of the PVA solution before the addition of iodine up to a certain time, after which it decreased with the standing time. The color development obtained with use of the PVA solution allowed to stand for a fixed time was higher for S-PVA with a lower s-(diad)%. In the case of the reaction mixture prepared by dissolving PVA in an iodine solution, the color development was higher for S-PVA with a higher s-(diad)%. The initial ratio of the I₅⁻/I₃⁻ and the rate of decrease in the ratio of I₅⁻/I₃⁻ were larger than those in the preceding case. The color development decreased for the PVA with an s-(diad) % of 58, whereas it increased for the PVA an s-(diad) % of 61.3 with increasing propanol content, an inhibitor of gelation. From these results, the aggregates of PVA molecules have been assumed to play an important role in forming the complexes. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1701–1709, 1997     

Kinetics of the complex process of thermo-oxidative degradation of poly(vinyl alcohol)

The thermo-oxidative degradation of poly(vinyl alcohol) (PVA) has been investigated by TG+DTG+DTA simultaneous analysis performed in static air atmosphere, at four heating rates, namely 3, 5, 10 and 15 K min⁻¹. TG, DTG and DTA curves showed that, in the temperature range 25–700°C, four successive processes occur. The first process consisting in the loss of physical adsorbed water is followed by three processes of thermal and/or thermo-oxidative degradations. The processing of the non-isothermal data corresponding to the second process (the first process of thermo-oxidation) was performed by using Netzsch Thermokinetics — A Software Module for Kinetic Analysis. The dependence of the activation energy evaluated by Friedman’s isoconversional method on the conversion degree shows that the investigated process is complex one. The mechanism of this process and the corresponding kinetic parameters were determined by Multivariate Non-linear Regression Program and checked for quasi-isothermal experimental data. It was pointed out that the first process of thermo-oxidation of PVA consists in three consecutive steps having Avrami-Erofeev kinetic model. The obtained results can be used for prediction of the thermal lifetime of PVA corresponding to a certain temperature of use and an endpoint criterion.     

Synthesis of high-molecular-weight poly(vinyl alcohol) with high yield by novel one-batch suspension polymerization of vinyl acetate and saponification

Generally, owing to tautomerism of vinyl alcohol monomer, poly(vinyl alcohol) (PVA) cannot be obtained by direct polymerization but it can be obtained by the saponification of poly(vinyl ester) precursors such as poly(vinyl acetate) (PVAc). In this study, to obtain high-molecular-weight (HMW) PVA with high yield through a one-batch method, we tried continuous saponification of PVAc prepared by suspension polymerization of vinyl acetate (VAc). We controlled various polymerization conditions, such as polymerization temperature, initiator concentration, suspending agent concentration, agitation speed, and VAc/water ratio, and obtained PVAc with a maximum conversion of VAc into PVAc of over 95-98%. PVA beads having various molecular parameters were prepared by continuous saponification of PVAc microspheres. Despite our employing a one-batch process, a maximum degree of saponification of 99.9% could be obtained. Continuous heterogeneous saponification of prepared PVAc yielded HMW PVA having a number-average degree of polymerization of 2,500-5,500, a syndiotactic diad content of 51-52%, and degree of saponification of 85.0-99.9%.     

Preparation and Characterization of Interpenetrating Polymer Hydrogels Based on Poly(acrylic acid) and Poly(vinyl alcohol)

Interpenetrating polymer hydrogels (IPHs) of Poly (vinyl alcohol) (PVA) and Poly (acrylic acid) (PAAc) have been prepared by a sequential method: crosslinked PAAc chains were formed in aqueous solution by crosslinking copolymerization of acrylic acid and N, N′-methylenebisacrylamide in the presence of PVA. The application of freezing-thawing cycles (F-T cycles) leads to the formation of a PVA hydrogel within the synthesized PAAc hydrogel. The swelling and the viscoelastic properties of the prepared IPHs were evaluated on the basis of the structural features obtained from solid state ¹³C-NMR spectroscopy.     

Synthesis of well‐defined azide‐terminated poly(vinyl alcohol) and their subsequent modification via click chemistry

A new azide‐functionalized xanthate, S‐(4‐azidomethylbenzyl) O‐(2‐methoxyethyl) xanthate, was synthesized and used to mediate the reversible addition fragmentation chain transfer polymerization of vinyl acetate. The polymerization was demonstrated to be controlled, and well‐defined PVAc with α‐azide, ω‐xanthate groups were obtained, the xanthate groups of which were further removed by radical‐induced reduction with lauroyl peroxide in the presence of excess 2‐propanol. Hydrolysis of α‐azide‐terminated PVAc (N₃‐PVAc) led to the formation of the corresponding α‐azide‐terminated PVA (N₃‐PVA). Finally, end‐modification of N₃‐PVA by click chemistry with alkyne‐end‐capped poly(caprolactone) (A‐PCL), alkynyl‐mannose, and alkynyl‐pyrene was carried out to obtain a new block copolymer PCL‐b‐PVA, and two PVA with mannose or pyrene as the end functional groups. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy, and FTIR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4494–4504, 2009     

Synthesis,characterization, and swelling behaviors of chitosan‐g‐poly(acrylic acid)/poly(vinyl alcohol) semi‐IPN superabsorbent hydrogels

A series of granulated semi‐interpenetrating polymer network (semi‐IPN) superabsorbent hydrogels composed of chitosan‐g‐poly(acrylic acid) (CTS‐g‐PAA) and poly(vinyl alcohol) (PVA) were prepared by solution polymerization using ammonium persulfate (APS) as an initiator and N,N′‐methylenebisacrylamide (MBA) as a crosslinker. The effects of reaction conditions such as the concentration of MBA, the weight ratio of AA to CTS, and the content of PVA on water absorbency were investigated. Infrared (IR) spectra and differential scanning calorimetry (DSC) analyses confirmed that AA had been grafted onto CTS backbone, and PVA semi‐interpenetrating into CTS‐g‐PAA networks. SEM analyses indicated that CTS‐g‐PAA/PVA has improved porous surface and PVA was uniformly dispersed in CTS‐g‐PAA network. The semi‐IPN hydrogel containing 10 wt% PVA shows the highest water absorbency of 353 and 53 g g^?1 in distilled water and 0.9 wt% NaCl solution, respectively. Swelling behaviors revealed that the introduction of PVA could improve the swelling rate and enhance the pH stability of the superabsorbent hydrogel. Copyright © 2009 John Wiley & Sons, Ltd.     

Dissolution mechanism of semicrystalline poly(vinyl alcohol) in water

Changes occurring in the degree of crystallinity and lamellar thickness distribution of poly(vinyl alcohol) (PVA) samples during dissolution in water were investigated. PVA samples of three different molecular weights were crystallized by annealing at 90, 110, and 120°C. The initial degrees of crystallinity measured by differential scanning calorimetry (DSC) and by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) varied from 43 to 60% and the average lamellar thicknesses measured by DSC ranged from 50 to 400 Å. PVA dissolution was followed at 25, 35, and 45°C from 30 s up to 195 min. Lamellar thicknesses were determined as a function of dissolution time using DSC. There was an initial drastic decrease in the degree of crystallinity, which leveled off to a fairly constant value before reaching zero by the time the polymer dissolved completely. Increase in molecular weight led to lesser number of crystals, but with larger average lamellar thickness, which were more stable in the presence of water. Increase in crystallization temperature or decrease in dissolution temperature led to larger average lamellar thickness. Based on these findings, a dissolution mechanism involving unfolding of the polymer chains of the crystal was proposed. © 1996 John Wiley & Sons, Inc.     

Viscoelastic behaviors and molecular motions of highly syndiotactic poly(vinyl alcohol) fibers

The viscoelastic behavior and molecular motion of highly syndiotactic poly(vinyl alcohol) (S‐PVA) fibers with a dyad syndiotacticity (r) of 69% were studied by dynamic mechanical thermal analysis and wide‐angle X‐ray diffraction and compared with those of atactic poly(vinyl alcohol) (A‐PVA) fibers with r = 54%. The β_c dispersion, based on the molecular motion of the chain molecules in the crystalline regions, was observed for A‐PVA around 120–140 °C, and the only primary (α_c) dispersion was observed for S‐PVA around 180 °C. The thermal expansion coefficients for the a and c axes of the A‐PVA crystal changed discontinuously around 120 °C, which corresponded to the β_c dispersion. For S‐PVA, the coefficient for the (002) plane changed discontinuously around 100 °C, similarly to A‐PVA, but that for the (100) plane remained unchanged between 20 and 220 °C. These results showed that the intermolecular hydrogen bonding of S‐PVA was stronger in the direction of the a axis than in the other directions, suppressing the β_c dispersion. The storage modulus and thermal expansion coefficient of the (020) plane (molecular axis) of S‐PVA decreased markedly around 180 °C, and this indicated that the α_c dispersion was due to the torsional motion of the molecular chains in the crystalline regions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 800–808, 2004     

The negative biodegradation of poly(vinyl alcohol) modified by aldehydes

Due to the wide application of PVA acetals, the biodegradation of PVA modified by formaldehyde, n-butyraldehyde, glyoxaldehyde and glutaraldehyde was conducted in an intensive biodegradation environment. Spectrophotometric analysis and weight loss were used to determine the biodegradation of PVA, and the changes of the mechanical properties of PVA acetals were also studied.An obvious decrease in biodegradation levels of all the modified samples was found, and a decrease in biodegradation level with increasing degree of acetals of PVA. The biodegradation of poly(vinyl formal) is better than poly(vinyl butyral) with the same degree of acetals whereas the biodegradation levels of poly(vinyl glyoxal) are lower than poly(vinyl glutaral) which has the same degree of crosslinking. The difference between the FT-IR of the samples before and after biodegradation indicated scission of residual PVA chain during the process.     

Peculiarities of Formation of Intermolecular Polycomplexes Based on Polyacrylamide,Poly(vinyl alcohol) and Poly(ethylene oxide)

The phenomenon of self-assembly of aggregates formed by relatively short chains of poly(vinyl alcohol) (PVA) on the long macromolecules of polyacrylamide (PAA) in aqueous medium are discussed. PVA and PAA form intermolecular polycomplexes (InterPC) of a constant composition independently on a ratio of polymer components. The complex formation between high-molecular-weight PAA and relatively low-molecular-weight poly(ethylene oxide) (PEO) are considered also. PEO with M ⩽ 4·10⁴ g.mol⁻¹ weakly interacts with PAA. The polymer-polymer interaction can be intensified when the part of amide groups (∼20 mol %) on PAA chain to transform into the carboxylic groups. InterPCs formed by PEO and initial or modified PAA have associative structure with friable packing of the polymer segments. They are stabilized by the hydrogen bond system.