Mechanical properties and structure relationships in drawn fibers of elastomer–polyoxymethylene blends

Superdrawn fibers of an elastomer–poly(oxymethylene) (POM) blend have been prepared and investigated in terms of the structure and mechanical properties. The development of the mechanical properties along the fiber axis and the formation of a higher order structure during drawing were slightly retarded by blending, but the loop tenacity increased greatly with the elastomer content. The blend microtextures had an immiscible and phase-separated morphology in which the elastomer was dispersed in the form of streaks between the oriented POM layers, which allowed the fiber to split into smaller filaments on bending. The high loop tenacity of the blend fibers is due to an increase in the radius of curvature resulting from the filament splitting on bending, because the shear stress at the bending corner becomes higher as the radius of curvature increases. © 1997 John Wiley & Sons, Inc.     

TPU共混增韧POM的研究

通过机械共混的方法制备了聚甲醛(POM)和热塑性聚氨酯弹性体(TPU)复合材料.考察了不同硬度TPU及其含量对共混材料韧性的影响.结果表明,TPU硬度的变化对共混材料的力学性能起着非常重要的作用,硬度为65HA的TPU对POM的增韧效果较好,对POM的相形态和结晶性能影响更为显著.     

Phase morphology and mechanical properties of iPP/SEP blends

The effects of the addition of diblock copolymer poly(styrene‐b‐ethylene‐co‐propylene) (SEP) to isotactic polypropylene (iPP) on the morphology and mechanical properties were investigated. Phase morphologies of iPP/SEP blends up to a 70/30 weight ratio, prepared in Brabender Plasticoder, were studied with optical microscopy, scanning electron microscopy, transmission electron microscopy, and wide‐angle X‐ray diffraction. The addition of 2.5 wt % SEP caused a nucleation effect (by decreasing the crystallite and spherulite size) and randomization of the crystallites. With further SEP addition, the crystallite and spherulite size increased because of prolonged solidification and crystallization and achieved the maximum in the 80/20 iPP/SEP blend. This maximum was a result of the appearance of β spherulites and the presence of mixed α spherulites in the 80/20 iPP/SEP blend. Dispersed SEP particles were irregular and elongated clusters consisting of oval and spherical core–shell microdomains or SEP micelles. SEP clusters accommodated their shapes to interlamellar and interspherulitic regions, which enabled a well‐developed spherulitization even in the 70/30 iPP/SEP blend. The addition of SEP decreased the yield stress, elongation at yield, and Young's modulus but significantly improved the notched impact strength with respect to the strength of pure iPP at room temperature. Some theoretical models for the determination of Young's modulus of iPP/SEP blends were applied for a comparison with the experimental results. The experimental line was closest to the Takayanagi series model. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 566–580, 2001     

Phase morphology and mechanical properties of the electrospun polyoxymethylene/polyurethane blend fiber mats

Polyoxymethylene/thermoplastic polyurethane (POM/TPU) blends containing 10–30 wt % of TPU were electrospun using hexafluoroisopropanol as the solvent. The average fiber diameter increases with the increase in TPU content from 0.68 μm for neat POM fibers to 0.92 μm for POM/TPU 7:3 blend fibers due to the increase in solution viscosity. Core/sheath structure with the major component POM as the core and the minor component TPU as the sheath was observed by transmission electron microscopy and further confirmed by surface N contents of the blend fiber mats. The crystalline melting point and the degree of crystallinity of POM have no obvious change by coelectrospinning with TPU due to lack of interaction between POM and TPU as revealed by Fourier transform infrared spectroscopy. Tensile tests showed that the unusual high ductility of POM fiber mat could be further increased by coelectrospinning with 10 or 20 wt % TPU without significantly decreasing the stiffness and strength. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1853–1859, 2009     

Mechanical properties of emulsion polymer blends

Polymer blend technology has been one of the most investigated areas in polymer science in the past 3 decades. The one area of polymer blends that has been virtually ignored involves simple emulsion blends, although several articles have recently appeared that address film formation and mechanical characteristics. In this study, we investigated the mechanical property behavior of emulsion blends composed of low/high‐glass‐transition‐temperature polymers (where low and high mean below and above the test temperature, respectively). The emulsions chosen for this study had similar particle sizes, and the mixtures were rheologically stable. Two conditions were chosen, a binary combination of polymers that were thermodynamically immiscible and another system that was thermodynamically miscible. The mechanical property results over the entire composition range were compared with the predictions of the equivalent box model (EBM) with the universal parameters predicted by percolation theory. An array of randomly mixed and equal‐size particles of differing moduli was expected to show excellent agreement with theory, and the emulsion blends provided an excellent experimental basis for testing the theory. For the immiscible blend, the EBM prediction for the modulus showed excellent agreement with experimental results. With tensile strength, the agreement between the modulus and theory was good if the yield strength for the higher glass‐transition‐temperature polymer was employed in comparison with the actual tensile strength. The phase inversion point (where both phases were equally continuous) was at a 0.50 volume fraction of each component (based on an analysis employing Kerner's equation), just as expected for a random mixture of equal‐size particles. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1093–1106, 2001     

Morphologies and electro-optic properties of phenoxy/liquid crystal composite films

Morphology and electro-optic properties of composite films composed of phenoxy and nematic liquid crystal (LC) have been studied at a film composition of 40/60 (polymer/LC by weight). Effects of temperature, frequency and voltage of applied a. c. electric field on the transmittance and response time of the films were measured.     

Effect of dispersed phase composition on morphological and mechanical properties of PET/EVA/PP ternary blends

Immiscible ternary blends of PET/EVA/PP (PET as the matrix and (PP/EVA) composition ratio = 1/1) were prepared by melt mixing. Scanning electron microscope results showed core‐shell type morphology for this ternary blend. Binary blends of PET/PP and PET/EVA were also prepared as control samples. Two grades of EVA with various viscosities, one higher and the other one lower than that of PP, were used to investigate the effect of components' viscosity on the droplet size of disperse phase. The effect of interfacial tension, elasticity, and viscosity on the disperse phase size of both binary and ternary blends was investigated. Variation of tensile modulus of both binary and ternary blends with dispersed phase content was also studied. Experimental results obtained for modulus of PET/EVA binary blends, showed no significant deviations from Takayanagi model, where considerable deviations were observed for PET/PP binary blends. Here, this model that has been originally proposed for binary blends was improved to become applicable for the prediction of the tensile modulus of ternary blends. The new modified model showed good agreement with the experimental data obtained in this study. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 251–259, 2010     

A polymer of bisphenol A and bisphenol A diglycidyl ether and its blends with poly(styrene‐co‐acrylonitrile): In situ polymerization preparation,morphology, and mechanical properties

The poly(hydroxy ether of bisphenol A)‐based blends containing poly(acrylontrile‐co‐styrene) (SAN) were prepared through in situ polymerization, i.e., the melt polymerization between the diglycidy ether of bisphenol A (DGEBA) and bisphenol A in the presence of poly(acrylontrile‐co‐styrene) (SAN). The polymerization reaction started from the initial homogeneous ternary mixture of SAN/DGEBA/bisphenol A, and the phenoxy/SAN blends with SAN content up to 20 wt % were obtained. Both the solubility behavior and Fourier transform infrared (FTIR) spectroscopy studies demonstrate that no intercomponent reaction occurred in the reactive blend system. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electronic microscopy (SEM) were employed to characterize the phase structure of the as‐polymerized blends. All the blends display the separate glass transition temperatures (T_g's); i.e., the blends were phase‐separated. The morphological observation showed that all the blends exhibited well‐distributed phase‐separated morphology. For the blends with SAN content less than 15 wt %, very fine SAN spherical particles (1–3 μmm in diameter) were uniformly dispersed in a continuous matrix of phenoxy and the fine morphology was formed through phase separation induced by polymerization. Mechanical tests show that the blends containing 5–15 wt % SAN displayed a substantial improvement of tensile properties and Izod impact strength, which were in marked contrast to those of the materials prepared via conventional methods. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 525–532, 1999     

Ternary blends of phenoxy/SAN/poly(-ε-caprolactone)

The compatibilizing effect of poly(ε-caprolactone) (PCL) on the blends of two immiscible polymers, poly(hydroxy ether of bisphenol A) (phenoxy) and poly(styrene-co-acrylonitrile) (SAN) has been investigated. The phase behavior of the ternary blends was affected by the AN content in the SAN copolymers and a maximum miscible region was observed at 19.5 wt % of AN. The effect of AN content on the phase behavior of the ternary blends was interpreted in terms of the relative magnitude of the segmental interaction energy densities, which were obtained by combining a melting point depression and an extended binary interaction model. When a small amount of PCL was added to the phenoxy/SAN blends, the phase morphology showed a finer phase dispersion, indicating that the interfacial tension between the phenoxy and SAN is considerably reduced. However, the improvement in tensile properties was limited despite the morphological change with the PCL content. From the results of the DSC measurements, SEM, and tensile testing, it was understood that the PCL acted as a compatibilizer for the immiscible phenoxy/SAN blends. © 1994 John Wiley & Sons, Inc.     

Film-forming ability and mechanical properties of coalesced latex blends

The film-forming ability of latex blends (hard latex + soft latex) and the mechanical behavior at finite strain of latex blend films (soft matrix with tough inclusions) has been investigated. The maximum weight fraction of hard latex particles (ϕ_max) which still gives rise to transparent and crack-free films has been used as film-forming ability criterion. It was shown that when the T_g of the soft latex is low (T_g(soft) < 0°C), ϕ_max is constant and equal to 0.55 because the film-forming ability is controlled by contacts between hard particles. Nevertheless, the expected effect of T_g(soft) on film-forming ability is observed (i.e., ϕ_max decreases when T_g(soft) increases) when T_g(soft) is above 0°C. From the mechanical behavior point of view, it was shown that the two main parameters controlling the mechanical behavior of latex blend films are: the mechanical properties of the soft polymer because it represents the continuous matrix and the weight fraction of hard latex particles since they enhance the local deformation of matrix under load. However, it was also proven that debounding between the T_g latex particles and low T_g matrix occurs rapidly (at an elongation ratio ≈ 30%) during uniaxial strain experiments and has to be taken into account in order to gain a thorough understanding of the mechanical behavior of these biphasic films. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2093–2101, 1997     

Morphology and mechanical properties of binary triblock copolymer blends

The influence of the morphology on the mechanical properties of binary styrene–butadiene (SB) triblock copolymer blends of a thermoplastic block copolymer and a thermoplastic elastomer (TPE) with different molecular architectures was studied with bulk samples prepared from toluene. Both block copolymers contained SB random copolymer middle blocks, that is, the block sequence S–SB–S. The two miscible triblock copolymers were combined to create a TPE with increased tensile strength without a change in their elasticity. The changes in the equilibrium morphology of the miscible triblock copolymer blends as a function of the TPE content (lamellae, bicontinuous morphology, hexagonal cylinders, and worms) resulted in a novel morphology–property correlation: (1) the strain at break and Young's modulus of blends with about 20 wt % TPE were larger than those of the pure thermoplastic triblock copolymer; (2) at the transition from bicontinuous structures to hexagonal structures (～35 wt % TPE), a change in the mechanical properties from thermoplastic to elastomeric was observed; and (3) in the full range of wormlike and hexagonal morphology (60–100 wt % TPE), elastomeric properties were observed, the strength greatly increasing and high‐strength elastomers resulting. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 429–438, 2005     

Relationship between fine structure of polyoxymethylene copolymer plates and methanol transport properties

An experimental study was made of diffusion behavior of methanol through three kinds of injection‐molded plates of a polyoxymethylene (POM) copolymer with different molecular weights M at 60 °C. Fine structure of the three sample plates was also examined by wide‐angle X‐ray diffraction and small‐angle X‐ray scattering, and moreover, their dynamic properties were investigated by the dynamic mechanical analysis (DMA). It is shown that the diffusion behavior may be well explained by the one‐dimensional Fick diffusion equation with a constant diffusion coefficient, and that the steady‐state transport rate increases with increasing M. As for fine structure, the crystallinity decreases slightly, and the preferential orientation and the long period increase, with increasing M. The long period of the lamellar stacking structure increases with increasing M, and it also increases with methanol transport. In DMA, the loss tangent tan δ becomes higher after the methanol transport in the wide range of temperature around the glass transition one. These results indicate that amorphous regions serve as channels for methanol molecules in the lamellar stacking structure, leading to the conclusion that the dependence of the steady‐state transport rate on M arises from the factors of crystallinity and long period. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1234–1242, 2007     

Poly(hydroxyether of bisphenol A)/poly(vinyl acetate) blends: In situ polymerization preparation,morphology, and properties

The blends of poly(hydroxyether of bisphenol A) (phenoxy) and poly(vinyl acetate) (PVAc) were prepared through in situ polymerization, i.e., the melt polymerization of diglycidy ether of bisphenol A (DGEBA) and bisphenol A in the presence of PVAc. The polymerization reaction started from the initial homogeneous ternary mixture of PVAc/DGEBA/bisphenol A; the phase separation induced by reaction occurred as the polymerization proceeded. The phenoxy/PVAc blends with PVAc content up to 20 wt % were obtained and were further characterized by the solubility, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and scanning electronic microscopy (SEM). The results indicate that no intercomponent reaction occurred during the in situ polymerization. All the blends display separate glass transition temperatures (Tg's); the very fine phase-separated morphology was obtained by this polymerization blending method. Mechanical tests show that the prepared blends exhibited substantial improvement of mechanical properties, especially in impact strength, which could be ascribed to the formation of the fine phase-separation morphology during in situ polymerization. The thermogravity analysis (TGA) of the blends showed that the thermal stability of the PVAc-rich phases in the blends was enhanced in comparison to the pure PVAc due to the synergistic contribution of the two phases in energy transportation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2329–2338, 1999     

聚醚砜／聚酚氧共混体系相容性与力学性能

聚醚砜／聚酚氧共混体系相容性与力学性能姜振华，马荣堂，寇喜春，安立佳（吉林大学化学系长春）（中国科学院长春应用化学研究所长春１３００２２）关键词聚醚砜，聚酚氧，共混物，相容性，力学性能，熔体粘度聚醚砜（ＰＥＳ）是一种耐热特种工程塑料，但韧性差、熔体粘...     

Effect of ionomers on mechanical properties, morphology, and rheology of polyoxymethylene and its blends with methyl methacrylate-styrene-butadiene copolymer

Two ionomers, ethylene-methacrylic acid copolymer ionized with sodium cation (EMA-Na) and zinc cation (EMA-Zn), were employed as impact modifiers to prepare blends with polyoxymethylene (POM) via a melt extrusion. A copolymer of methyl methacrylate-styrene-butadiene (MBS) used as a co-impact modifier was also incorporated into the blends. The mechanical properties, thermal properties, morphology, and rheology were studied. A moderate toughening was observed for POM/ionomer binary blends, which was attributable to the rubbery natural and good adhesion of the ionomers. EMA-Zn exhibited a much better toughening effect than EMA-Na because of its higher elasticity and stronger interaction with POM. The incorporation of the ionomers into POM/MBS blends resulted in an improvement of mechanical properties, which was attributable to the compatibilizing effect of ionomer on POM/MBS blending system. The observation of scanning electron microscopy demonstrated that the finer phase domains were caused by incorporation of ionomers, which, acting as a compatibilizer as well as an impact modifier, reduced the interfacial tension and improved the interfacial adhesion between the phases. Differential scanning calorimetry investigation indicated that the presence of ionomer in the blends disturbed the crystallization of POM and resulted in a decrease in the crystallinity of POM. The evaluation of melt flow index revealed an increase in viscosity of the blends by incorporation of the ionomers, which was caused the ionic interaction between POM and the ionomers.     

Orientation and mechanical properties of PBT and its blends with a liquid-crystalline copolyester

Blends of poly (butylene terephthalate) (PBT) and a liquid-crystalline copolyester (60 mol % poly(p-hydroxy benzoic acid)/40 mol % polyethylene terephthalate) (LCP) were prepared in the melt state. The investigation of mechanical properties indicated that, for the processing conditions used, neither the addition of up to 30 wt % LCP to PBT nor the cooling history affected significantly the tensile modulus E. For oriented specimens, a marked improvement of E was obtained for all the blends, and increased with the LCP content. This improvement was more marked for slowly cooled samples. X-ray diffraction was used to quantify the orientation of the crystalline PBT and liquid-crystalline LCP phases. It was shown that neither the thermal history nor the presence of up to 30 wt % LCP affected the orientation behavior of the PBT crystalline phase. For the LCP phase, measurements were not possible for concentrations lower than 10 wt %, and were more difficult and less precise than for PBT. Nevertheless, it was possible to show that a better orientation was obtained for the slowly cooled samples and for higher concentrations of LCP in the blends. This correlated with the enhancement of mechanical properties observed for the oriented samples.     

Crystallization behavior and toughening mechanism of poly(ethylene oxide) in polyoxymethylene/poly(ethylene oxide) crystalline/crystalline blends

In this study, the unique crystallization behavior of poly(ethylene oxide) (PEO) in polyoxymethylene (POM)/PEO crystalline/crystalline blends was examined in detail. This study was the first to report the typical fractionated crystallization of PEO in POM/PEO blends when PEO is fewer than 30 wt.%. The delayed crystallization temperature of PEO was confirmed at about 5°C to 14°C by using differential scanning calorimetry and perturbation–correlation moving‐window 2D correlation IR spectroscopy. Wide‐angle X‐ray diffraction indicates that no new crystal structures or co‐crystals were generated in POM/PEO. The statistical calculations of scanning electron microscopy photos show that the average diameter of PEO particles is 0.227 µm to 1.235 µm and that the number of small particles is as many as 10⁹ magnitudes per cm³. Theory analysis establishes that the delayed crystallization of PEO is a heterogeneous nucleation process and not a homogeneous nucleation process. A significant toughening effect of PEO to POM was also observed. The impact strength of POM/PEO acquires a maximum of 10.5 kJ/m² when PEO content is 5%. The impact strength of the blend increases by 78.0% compared with pure POM. To improve the toughening effect, the best particle size is established between 0.352 and 0.718 µm, with a PEO particle spacing of 0.351 µm to 0.323 µm. The number of corresponding particles was 0.887 × 10⁹ per cm3 to 3.240 × 10⁹ per cm³. A PEO toughening model for POM was proposed to provide a new and effective way to solve the problem of POM toughening. Copyright © 2014 John Wiley & Sons, Ltd.     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

Rheological and mechanical properties of epoxy/polyurethane blends initiated by N‐benzylpyrazinium hexafluoroantimonate salt

In this work the cure behavior and rheological and mechanical interfacial properties of the diglycidylether of bisphenol A (DGEBA)/polyurethane (PU) blend system, initiated by 1 wt % N‐benzylpyrazinium hexafluoroantimonate as a latent thermal catalyst, were investigated. To characterize the mechanical interfacial properties of the system, the critical stress intensity factor (K_IC) was calculated with a single‐edge‐notched beam (SEN) beam fracture toughness test. And an impact test was performed at room and cryogenic temperatures to determine the performance of PU at room and low‐temperatures, respectively. As a result, the E_c of the blend system was increased with increasing PU content, showing a maximum value at 30 wt % PU, which was in good agreement with the mechanical properties of the blend system. Consequently, these results could be explained by the improvement that occurred in intermolecular hydrogen bonding between the hydroxyl group in EP and the isocyanate group in PU, resulting in increased compatibility of the components within the interpenetrating polymer networks. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3841–3848, 2004     

Processing,mechanical properties,and fracture behavior of cereal protein/poly(hydroxyl ester ether) blends

Blends of poly(hydroxy ester ether) (PHEE), a recently developed bisphenol A ether‐based synthetic biodegradable thermoplastic polymer, with a soybean protein isolate and two hydrolyzed wheat glutens were studied. Blends of the proteins with PHEE were produced from 20 to 70% by weight of protein content. Young's moduli of the protein/PHEE blends fall in the range of 0.8–1.5 GPa with tensile strengths ranging from 10 to 30 MPa. Critical stress‐intensity factors of the blends ranged from 2 to 9 MPa‐m^1/2 depending on the amount of protein added. Morphological analysis indicated a moderate degree of adhesion between the protein and PHEE phases in the blends. In general, as the protein content was increased the materials lost ductility and failed in a brittle manner; however, the mechanical properties of several compositions were comparable to commercial thermoplastics such as polystyrene. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2324–2332, 2002