Competitive complex forming reactions between monosubstituted and nonsubstituted poly(ethylene glycol)s with poly(methacrylic) acid

A competitive complex forming reaction between a number of monosubstituted poly(ethylene glycol)s (PEG*) containing a hydrophobic group of differing chemical nature and nonsubstituted PEG of various molecular weights with poly(methacrylic acid) (PMAA) was studied. A UV spectroscopy method was used. During the transfer of the hydrophobic chromophoric group from the aqueous medium into the hydrophobic domains of the polycomplex (PMAA.PEG*), a bathochromic effect was observed. The introduction of a hydrophobic group into the PEG chain leads to stabilization of the polycomplex (PMAA.PEG) that is formally the same as growing the chain length of PEG. The polymerization degree of PEG having the same competitive power as PEG* can be used as the peculiar scale of the complex forming ability of PEG* in the complexation with PMAA. © 1996 John Wiley & Sons, Inc.     

Interpolymer complex formation between helical poly(L-proline) and random-coil poly(methacrylic acid) through hydrogen bonding

Interpolymer complex formation between poly(L -proline) (PLP) with helical structure and poly(methacrylic acid) (PMAA) with random-coil structure through hydrogen bonding in aqueous medium has been studied by several experimental techniques, e.g., viscometry, turbidimetry, potentiometry, conductometry, scanning electron microscopy, and x-ray diffraction methods. The decreases in reduced viscosity of the solution on addition of an increasing quantity of PLP to a constant amount of PMAA reveals the formation of a complex between PLP and PMAA. The minimum in reduced viscosity at a unit-mole ratio [PLP]/[PMAA] = 1.0 suggests a 1 : 1 complex formation. A distinct change in the curves for turbidity, pH, and conductance versus [PLP]/[PMAA] supports this conclusion. A scanning electron micrograph for the 1 : 1 PLP–PMAA complexes shows that the PLP/PMAA complex has the shape of entangled long fibers. An x-ray diffraction pattern for the PLP/PMAA complexes gives no diffraction patterns which appear in pure PLP, indicating the destruction of the helical structure of PLP due to the interpolymer complexation. Mixtures of PMAA with poly(γ-hydroxy-L -proline) (PHLP) which has a similar conformation as PLP, but involves intra- or intermolecular hydrogen bonds, has also been investigated by vicometry measurements. The reduced viscosity of a solution of the mixed polymers increases with increasing [PHLP], indicating no complex formation. All the results reveal that the magnitude and the nature of the forces acting in the polymers play an important role in interpolymer complexation.     

Interaction between poly(N-vinylpyrrolidone) and poly(acrylic acid)s: Influence of hydrogen and cupric ions on the adduct formation

Interpolymer adduct formation between poly(N-vinylpyrrolidone) (PVP) and poly(methacrylic acid) (PMAA) is mainly due to hydrogen bonding. It is found that the interpolymer adduct formation is enhanced in the presence of Cu(II). A simple turbidity measurement making use of a spectrophotofluorometer is described for the study of the interpolymer adduct formation. Enhanced adduct formation in the presence of Cu(II) is described by the empirical relation d[PAd]/D[PVP] = k × 10^4α[Cu(II)]^α, where PAd represents the interpolymer adduct and α and k are constants. Similar results have been obtained in the case of interpolymer adduct formation between poly(acrylic acid) (PAA) and PVP. In the above expression α signifies the influence of chelation on Cu(II)–PAA/PMAA–PVP-type complex formation and k is the extent of PVP–PAA/PMAA interaction. The enhancement of adduct formation in the presence of Cu(II) is more in PAA than in PMAA. Turbidity and viscosity measurements further indicate that the influence of Cu(II) on interpolymer adduct formation between PVP and PMAA or PAA is more in the case of PAA than PMAA, as PAA is a better chelating ligand. But the extent of adduct formation is more in the case of PMAA in the absence of Cu(II) ions due to hydrophobic interactions exerted by methyl groups.     

Cross-polarization with magic-angle spinning kinetics and impedance spectroscopy study of proton mobility,local disorder,and thermal equilibration in hydrogen-bonded poly(methacrylic acid)

The ¹H–¹³C cross-polarization with magic-angle spinning (CP MAS) kinetics was studied in poly(methacrylic acid) (PMAA) having the purpose to track the links between the local order in the main chain and the proton dynamics in peripheral hydrogen bond networks. The experimental CP MAS kinetic curves were analyzed applying the models of isotropic and anisotropic spin-diffusion with thermal equilibration. The fractal dimension D_p ≈ 3 was deduced that indicates that PMAA behaves as an isotropic 3D-system. No proton conductivity in the neat PMAA was deduced from the impedance spectroscopy data analyzing the frequency dependences of the complex dielectric permittivity. The value of local order parameter S = 0.70 for CH₂ in PMAA occupies an intermediate position between 0.63 and 0.85 deduced for CH₂ sites in the main chains of poly(vinyl phosphonic acid) and poly(2-hydroxyethyl methacrylate), that is, the true proton conductor and the polymer that contains the H-bond network, however, no proton conductivity, respectively.     

Solid‐state 13C NMR study on thermal dehydration process of poly(methacrylic acid)(PMAA)

Thermal dehydration process of PMAA was investigated by solid‐state ¹³C NMR. For heat‐treated PMAA at 150°C, at which the dehydration goes very slowly, we observed three ¹³C peaks at 172, 178, and 187 ppm in the carboxyl group region. The peak at 172 ppm is due to the intramolecular cyclic anhydrides by comparing the reported value of ¹³C chemical shift. The peaks at 178 and 187 ppm were assigned to regularly aligned free carboxylic acids and intermolecular acid dimers, respectively, from the 2D‐exchange ¹³C NMR spectra, ¹³C chemical shift values and IR spectra. We concluded that by heat‐treatment the rearrangement of intermolecular hydrogen bonding of the carboxylic acids in PMAA occurs firstly to form the regularly aligned acid dimers, and the dimers dissociated to be the regularly aligned free carboxylic acids at high temperatures. The adjacent free carboxyl acids dehydrate with each other, resulting in the formation of intramolecular anhydrides. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2007–2012, 1999     

Positron annihilation and differential scanning calorimetry studies of polyacrylamide and poly(dimethylacrylamide)/poly(ethylene glycol) blends

Positron annihilation lifetime spectroscopy and differential scanning calorimetry (DSC) measurements were performed for blends of polyacrylamide (PAM) and poly(ethylene glycol) (PEG) and blends of poly(dimethylacrylamide) (PDMAM) and PEG. The samples were prepared by codissolution in a concentration range of 0–100 wt % PEG. The thermal behavior, characterized by DSC measurements, showed similar variations of the glass‐transition temperatures (T_g's) with the PEG concentration for the two systems. Pure PAM and PDMAM presented T_g's of 188 and 111 °C, respectively. A relatively small and nearly linearly decreasing T_g was observed for the two systems in the range of 20–80 wt % PEG. PEG crystals were present in all blend compositions, and no melting point depression was observed. The thermal results pointed to the partial miscibility of the blends. The degree of crystallinity of PEG increased with increasing PEG concentration for the PDMAM/PEG systems. The ortho‐positronium lifetime (τ₃) increased with increasing PEG concentration for both blends. However, the parameter of the ortho‐positronium formation probability (I₃) decreased with the PEG concentration. The product τI₃, which was proportional to the total free volume fraction, was approximately constant with the PEG concentration for PDMAM blends and increased with the PEG concentration for PAM systems. This result may be interpreted as a consequence of a more heterogeneous structure in PAM blends. Scanning electron microscopy micrographs of blends with 40 and 80 wt % PEG provided evidence of the regions associated with PEG crystallites. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1493–1500, 2003     

Template polymerization of N-vinylimidazole along poly(methacrylic acid) in water. VI. Crosslinked PMAA as template

The effect of crosslinked poly(methacrylic acid) (c-PMAA) on the polymerization of N-vinylimidazole in aqueous solution was studied using UV, calorimetry, SEM, and TEM. It was established that synthetic lightly crosslinked PMAA samples behaved intermediate between rigid crosslinked PMAA particles functioning as microreactors, and linear conventional PMAA, where template and conventional polymerization in the surrounding solution are integrated. A modified calorimetric technique was used to measure monomer conversion, and to correct for the rapid adsorption process. Rate enhancements up to a factor of 4 were obtained for the c-PMAA's, which were lower than those obtained for linear conventional PMAA, and which slightly decreased with increasing crosslink density of the samples. Template complexes possessed a platelet-like morphology similar to template complexes obtained for linear PMAA.     

Studies on interpolymer self-organisation behaviour of protoporphyrin IX bound poly(carboxylic acid)s with complimentary polymers by means of fluorescence techniques

Covalently bound protoporphyrin IX was used as a fluorophore to investigate the interpolymer complex formation between the poly(carboxylic acid)s, PMAA/PAA and poly(N-vinyl pyrrolidone), PVP, poly(ethylene oxide), PEO or poly(ethylene glycol), PEG. Absorption and emission spectral properties of protoporphyrin IX bound to PAA, PMAA and PVP have been studied. Protoporphyrin IX in poly(MAA-co-PPIX) was found to be present in the dimer or higher aggregated form at low pH due to the environmental restriction imposed by the polymer whereas in the case of poly(AA-co-PPIX) and poly(VP-co-PPIX), PPIX exists in monomeric form. The fluorescence intensity and lifetime of PPIX bound to poly(carboxylic acid)s increase on complexation through hydrogen bonding with PVP, PEO and PEG due to the displacement of water molecules in the vicinity of the PPIX. Poly(MAA-co-PPIX) shows longer fluorescence lifetime due to the more compact interpolymer complexation as compared to poly(AA-co-PPIX) due to the enhanced hydrophobicity of PMAA. Poly(VP-co-PPIX) shows a decrease in the fluorescence lifetime on complexation with PMAA or PAA due to the hydrophilic and microgel like environment of the fluorophore bound to PVP. The contrasting behaviour of the same polymer adduct with respect to the site of the fluorophore is interpreted to be due to the solvent structure which determines the environment of the fluorophore.     

Formation of nanoporous poly(aryl amide ether) (PAAE) films by selective removal of poly(ethylene glycol) (PEG) from PEG/PAAE composite films

Poly(aryl amide ether) (PAAE) thin films with nanometer-sized pores have been prepared in two steps: (1) solution casting of partially miscible poly(ethylene glycol) (PEG)/PAAE blends from one of their common solvents, dimethyl sulfoxide (DMSO), results in formation of PEG/PAAE nanocomposite films; (2) selective removal of PEG component by water washing yields nanosized, porous PAAE films. The pores have been found to have a small size variation and cover the whole surface homogeneously. With an increase in PEG contents, the sizes of the pores increase but the size distributions do not have much changes. This has been ascribed to formation of small PEG domains in PEG/PAAE composite films, which is facilitated by the strong interactions, mostly hydrogen bonds, between PEG and PAAE macromolecular chains.     

Characterization of poly(carboxylic acid)/poly(ethylene oxide) blends formed through hydrogen bonding by spectroscopic and calorimetric analyses

The solid state of the complex between poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO), and that between poly(methacrylic acid) (PMAA) and PEO formed via hydrogen-bonding was studied by differential-scanning calorimetric (DSC) and by Fourier-transform infrared (FT–IR) spectroscopic measurements. Melting temperature T_m and the degree of the crystallinity X_c of PEO in the systems PAA (or PMAA)/PEO blends obtained from aqueous or dimethyl sulfoxide (DMSO) medium were measured in various unit mol % of PEO ([PEO]100/{[PAA(or PMAA)] + [PEO]}) where [ ] is the unit mole concentration. It was found that 50 unit mol % of PEO is a critical composition, which gives new evidence for the 1 : 1 complex formation between PAA (or PMAA) and PEO. From the FT–IR spectroscopic analysis in conjunction with DSC measurements we also found that the effects of solvent and of hydrophobic interaction (due to the α-methyl group of PMAA) are the important factors controlling the complexation in the solution and solid systems. These factors also affect the crystallization behavior and the microstructure of the PAA (or PMAA)/PEO blend in solid state.     

Association of copolymers of methacrylic acid and 4-vinylpyridine in comparison with an intermacromolecular complex of poly(methacrylic acid) with poly(4-vinylpyridine)

Solution properties of copolymers [C(MA-Py)x] of methacrylic acid and 4-vinylpyridine and intermacromolecular complexes of poly(methacrylic acid) (PMAA) and poly(4-vinylpyridine) (PVP) in the presence or absence of a proton-accepting water-soluble polymer such as poly(ethylene glycol) (PEG) in water/methanol mixed solvent are studied by potentiometric titration, turbidity and viscosity methods. These copolymers behave like polyampholytes and their solubilities are strongly dependent with pH changes. The pH regions where they are precipitated around their isoelectric points are narrower than those of the intermacromolecular complex of PMAA with PVP. The polyampholyte can form an intermacromolecular complex with PEG in acidic solution but this complex is soluble in the medium.     

Use of poly(ethylene glycol) to control cell aggregation and fusion

Although poly(ethylene glycol) (PEG) has been widely used as an agent to induce cell aggregation and fusion, the physicochemical principles of its function are only becoming understood recently. PEG has an extremely high affinity for water. The PEG commonly used for these applications is in the molecular weight range of 8000 to 10 000. At low concentrations (0–15 wt.%), PEG in this molecular weight range tends to deplete from cell or lipid surfaces, creating an osmotic gradient which brings cells or lipid vesicles together. The depletion force is measured using a surface force apparatus. The corresponding reduction of surface viscosity is verified by shear viscosity measurements and by vesicle tumbling experiments. At higher concentrations (15–45 wt.%), the extremely high osmotic pressure generated by PEG compresses apposing surfaces of aggregated cells or vesicles to within limits where the membrane is no longer stable, and fusion occurs at point defects. A fusion lumen is formed with the help of cell swelling. If PEG is adsorbed or covalently link to the cell or vesicle surface, the surface force profile becomes entirely repulsive, and aggregation and fusion is inhibited. The repulsion is accountable by steric and electrostatic forces. Therefore, the fusogenic function of PEG can be explained quantitatively by colloidal stability theories.     

Phase-mixed poly(ethylene glycol)/poly(trimethylolpropane triacrylate) semi-interpenetrating polymer networks obtained by rapid network formation

Semi-interpenetrating polymer networks (semi-IPNs) of poly(ethylene glycol) (PEG) in poly(trimethylolpropane triacrylate) (TMPTA) were synthesized from PEG melts in neat TMPTA monomer, using PEG of molecular weights from 4000 to 100,000 g/mol. Differential scanning calorimetry and transmission electron microscopy were used to examine phase separation occurring during network formation. The degree of phase separation was observed to depend upon the rate of PEG aggregation relative to the rate of network formation during TMPTA polymerization. Higher molecular weight PEG and acrylate-functionalized PEG formed more phase-mixed networks compared to lower molecular weight PEG; acetatefunctionalized PEG showed no difference from unmodified PEG in the extent of phase mixing. For networks that demonstrated phase separation, the PEG was observed to be in two states: some being phase mixed and solvent inextractable, and some being phase separated and solvent extractable. Phase-mixed networks could be obtained from this thermodynamically incompatible polymer pair utilizing rapid photopolymerization systems to overcome PEG phase aggregation and kinetically entrap the PEG in a nonequilibrium phase-mixed state. These mixed-phase semi-IPNs of PEG and TMPTA may be useful in biological applications where the presence of PEG is desired throughout the bulk matrix rather than as a surface graft to reduce biological interactions. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(ethylene glycol) methyl ether endcapped poly(ethylene terephthalate)

Linear and branched poly(ethylene terephthalate) (PET) copolymers with polyethylene glycol) (PEG) methyl ether (700 or 2000 g/mol) end groups were synthesized using conventional melt polymerization. DSC analysis demonstrated that low levels of PEG end groups accelerated PET crystallization. The incorporated PEG end groups also decreased the crystallization temperature of PET dramatically, and copolymers with a high content of PEG (>17.6 wt%) were able to crystallize at room temperature. Rheological analysis demonstrated that the presence of PEG end groups effectively decreased the melt viscosities and facilitated melt processing. XPS and ATR-FTIR revealed that the PEG end groups tended to aggregate on the surface, and the surface of compression molded films containing 34.0 wt% PEG were PEG rich (85 wt% PEG). PEG end-capped PET (34.0 wt% PEG) and PET films were immersed into a fibrinogen solution (0.7 mg/mL BSA) for 72 h to investigate the propensity for protein adhesion. XPS demonstrated that the concentration of nitrogen (1.05%) on the surface of PEG endcapped PET film was statistically lower than PET (7.67%). SEM analysis was consistent with XPS results, and revealed the presence of adsorbed protein on the surface of PET films.     

Preparation and complexation of an A–B–A type triblock copolymer consisting of helical poly(L-proline) and random-coil poly(ethylene oxide)

By using L -proline N-carboxyanhydride (LPNCA) and amino-group terminated poly(ethylene oxide) (ATPEO), an A–B–A–type [A = poly(L -proline) (PLP), B = poly(ethylene oxide) (PEO)] triblock copolymer (POP) was prepared which is water-soluble. In the POP, A = PLP is helical, and B = PEO is random coil. From the observations of the NMR spectra, specific optical rotation, and x-ray diffraction of the POP, it was found that the PLP component of the POP exists nearly as Form II PLP with trans-configuration, and interferes the crystal growth of PEO component, in solid state. With the addition of PMAA into an aqueous POP solution, dramatic decreases of reduced viscosity and pH are observed until the unit-mole-concentration-ratio (UMCR) [PMAA]/[POP] reaches its value of unity, while a distinct increase in turbidity appears. This shows a 1 : 1 interpolymer complex formation between PMAA and POP in aqueous medium through hydrogen bonding. The curves of viscosity, pH, and turbidity versus UMCR [PMAA]/[POP] show breaks at [PMAA]/[POP] = 0.3, suggesting the selective complexation of PLP component (ca. 30 unit-mol %) of POP with PMAA. The x-ray diffraction curve of the complex POP/PMAA shows entirely no diffraction patterns, indicating that the ordered POP structure (mainly due to that of PLP component) is completely destroyed owing to the complexation between POP and PMAA.     

Crystallization and stereocomplexation governed self‐assembling of poly(lactide)‐b‐poly(ethylene glycol) to mesoscale structures

The stereocomplex formation between enantioselective poly(lactide) (PLA) homopolymers is well understood. In this report an attempt is made to analyze the influence on the self‐assembling of the stereocomplex of enantiomorphic PLA‐PEG di‐ and tri‐blocks in different solvents. Powder diffraction studies showed the poly(ethylene glycol) (PEG) and the PLA blocks crystallize separately forming unique supra structures like rods, discs and coiled coils with dimensions in the micrometer scale in length and sub‐micrometer scale in diameter. The influence of the solvents on the crystal formation was shown in the formation of uniform structures. Discs emerged from equimolar mixtures of the D ‐ and L ‐configured di‐ and tri‐block copolymers, in dioxan and acetonitrile and in water the stereocomplexes crystallized mainly as rods. In some cases the rods were observed as coiled coils. The shape, the hydrophobic/hydrophilic content and the PEG coated surface of the discs give them a future potential as matrix for the controlled and targeted delivery of bioactive agents. Copyright © 2005 John Wiley & Sons, Ltd.     

Novel tricomponent membranes containing poly(ethylene glycol)/poly(pentamethylcyclopentasiloxane)/poly(dimethylsiloxane) domains

The synthesis and characterization of novel tricomponent networks consisting of well‐defined poly(ethylene glycol) (PEG) and poly(dimethylsiloxane) (PDMS) strands crosslinked and reinforced by poly(pentamethylcyclopentasiloxane) (PD₅) domains are described. Network synthesis occurred by dissolving α,ω‐diallyl PEG and α,ω‐divinyl PDMS prepolymers in a common solvent (toluene), introducing a stoichiometric excess of pentamethylcyclopentasiloxane (D₅H) to the charge, inducing the cohydrosilation of the prepolymers by Karstedt's catalyst and completing network formation by the addition of water. Water in the presence of the Pt‐based catalyst oxidizes the SiH groups of D₅H to SiOH functions that immediately polycondense and bring about crosslinking. The progress of cohydrosilation and polycondensation was followed by monitoring the disappearance of the SiH and SiOH functions by Fourier transform infrared spectroscopy. Because cohydrosilation and polycondensation are essentially quantitative, overall network composition can be controlled by calculating the stoichiometry of the three network constituents. The very low quantities of extractable (sol) fractions corroborate efficient crosslinking. The networks swell in both water and hexanes. Differential scanning calorimetry showed three thermal transitions assigned, respectively, to PEG (melting temperature: 46–60 °C depending on composition), PDMS [glass‐transition temperature (T_g) = ～?121 °C], and PD₅ (T_g = ～?159 °C) and indicated a phase‐separated tricomponent nanoarchitecture. The low T_g of the PD₅ phase is unprecedented. The strength and elongation of PEG/PD₅/PDMS networks can be controlled by overall network composition. The synthesis of networks exhibiting sufficient mechanical properties (tensile stress: 2–5 MPa, elongation: 100–800%) for various possible applications has been demonstrated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3093–3102, 2002     

Greatly enhanced hydrolytic degradation ability of poly(L-lactide) achieved by adding poly(ethylene glycol)

Plasticized poly(L-lactide)(PLLA) materials have been applied in many fields and the microstructure performance of such materials attracts much attention of researchers. However, few reports declared the hydrolytic degradation ability of the plasticized PLLA materials. In this article, a small quantity of poly(ethylene glycol)(PEG) was introduced into PLLA, which aimed to understand the hydrolytic degradation behavior of the plasticized PLLA materials. The microstructures of the plasticized samples were comparatively investigated using scanning electron microscopy(SEM), wide angle X-ray diffraction(WAXD), differential scanning calorimetry(DSC) and Flourier transform infrared spectroscopy(FTIR), etc. The results demonstrated that PEG improved the hydrophilicity of sample surface, and the relatively high content of PEG enhanced the crystallization ability of PLLA matrix. The hydrolytic degradation measurement was carried out at 60 ℃ in an alkaline solution of pH = 12. The results demonstrated that the plasticized PLLA samples exhibited accelerated hydrolytic degradation compared with the pure PLLA sample, and the hydrolytic degradation was also dependent on the PEG content. Further results demonstrated that PEG induced the change of hydrolytic degradation mechanism possibly due to the good dissolution ability of PEG in water, which provided more paths for the penetration of water. Furthermore, the microstructure evolution of the plasticized PLLA during the hydrolytic degradation process was also investigated, and the results demonstrated the occurrence of PLLA crystallization, which was possibly contributed to the decreased hydrolytic degradation rate observed at relatively long hydrolytic degradation time. This work is of great significance and may open a new way for promoting the reclamation of PLLA waste material.     

The synthesis and characterization of monodisperse poly(acrylic acid) and poly(methacrylic acid)

A number of polyacrylic (PAA) and polymethacrylic (PMAA) acids have been synthesized by living anionic polymerization of the monomeric tert-butyl esters followed by subsequent hydrolysis of the corresponding polyesters. The necessary precautions were taken in order to assure good molecular weight control, as well as high yields in the polymerization reactions. The intermediate and final polymers were characterized by gel permeation chromatography and NMR-H¹ spectrometry.     

Supramolecular hydrogel formation based on inclusion complexation between poly(ethylene glycol)-modified chitosan and alpha-cyclodextrin

Supramolecular hydrogels have been prepared on the basis of polymer inclusion complex (PIC) formation between poly(ethylene glycol) (PEG)-modified chitosans and alpha-cyclodextrin (alpha-CD). A series of PEG-modified chitosans were synthesized by coupling reactions between chitosan and monocarboxylated PEG using water-soluble carbodiimide (EDC) as coupling agent. With simple mixing, the resultant supramolecular assembly of the polymers and alpha-CD molecules led to hydrogel formation in aqueous media. The supramolecular structure of the PIC hydrogels was confirmed by differential scanning calorimetry (DSC), X-ray diffraction, and (13)C cross-polarized/magic-angle spinning (CP/MAS) NMR characterization. The PEG side-chains on the chitosan backbones were found to form inclusion complexes (ICs) with alpha-CD molecules, resulting in the formation of channel-type crystalline micro-domains. The IC domains play an important role in holding together hydrated chitosan chains as physical junctions. The gelation property was affected by several factors including the PEG content in the polymers, the solution concentration, the mixing ratio of host and guest molecules, temperature, pH, etc. All the hydrogels in acidic conditions exhibited thermo-reversible gel-sol transitions under appropriate conditions of mixing ratio and PEG content in the mixing process. The transitions were induced by supramolecular association and dissociation. These supramolecular hydrogels were found to have phase-separated structures that consist of hydrophobic crystalline PIC domains, which were formed by the host-guest interaction between alpha-CD and PEG, and hydrated chitosan matrices below the pK(a).The formation of inclusion complexes between alpha-cyclodextrin and PEG-modified chitosan leads to the formation of hydrogels that can undergo thermo-reversible supramolecular dissociation.