Synthesis and crosslinking of poly (aryl ether)s containing 1,1-diphenylethylene moieties

Poly (aryl ether)s containing the diphenylethylene moiety, synthesized from 1,1-bis(4-fluo-rophenyl)ethylene or 1,1-bis(4-hydroxyphenyl)ethylene, are thermally crosslinkable. Char-acterization and crosslinking studies of these polymers were carried out by GPC, DSC, TGA, and NMR. The solvent resistance and T_g's of the resulting crosslinked networks increase after crosslinking. Thermogravimetric analysis shows that no significant mass loss accompanies the crosslinking reaction. © 1995 John Wiley & Sons, Inc.     

Synthesis of siloxane‐crosslinked polysilylenemethylenes by chlorodephenylation

Thermally stable polysilylenemethylenes (PSMs) with siloxane crosslinking moieties were successfully synthesized by chlorodephenylation of preformed poly(methylphenylsilylenemethylene) (PMPSM) and subsequent in situ alcoholysis/hydrolysis/condensation reactions. The simplified process and mild reaction conditions are quite advantageous. The crosslink density of these materials can be adjusted by the degree of chlorodephenylation, although an alkoxysilyl group remains to some extent. The resulting crosslinked PSMs have well defined structures in which the backbone is composed of MePhSiCH₂ and Me(MeO)SiCH₂ as well as Me(O_1/2)SiCH₂ as a crosslinking moiety. The resulting crosslinked PSMs exhibited glass‐transition temperatures ranging from 15 to 20 °C, whereas that of linear PMPSM was 22 °C. The crosslinked PSMs remained unchanged in weight below 300 °C, suggesting that they are thermally stable up to that temperature. The good solvent resistance caused by crosslinking as well as high thermal stability of these materials allow us to design new PSM‐based polymer blends and preceramic polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 416–422, 2002     

Living cationic polymerization of a coumarin‐substituted vinyl ether and reversible photoinduced crosslinking of the resulting homopolymers and amphiphilic block copolymers

Living cationic polymerization of 4‐methyl‐7‐(2‐vinyloxyethoxy)coumarin (CMVE) was achieved using SnCl₄ in the presence of nBu₄NBr as an added salt at 0 °C. The number‐average molecular weight of the resulting polymers increased in direct proportion to the monomer conversion while retaining relatively low polydispersity. Structural analysis revealed that the resulting polymers carried pendant coumarinyl moieties. These coumarinyl moieties were crosslinked by irradiation with UV light at λ_max = 366 nm, and the crosslinked sites were then cleaved by irradiation with UV light at λ_max = 254 nm. The crosslinking behaviors of the polymers were studied by UV and FTIR spectroscopic measurement. PolyCMVE was soluble in dichloromethane but was found to be insoluble upon UV light irradiation. We also synthesized amphiphilic block polymers bearing coumarinyl moieties by living cationic copolymerization with an amphiphilic vinyl ether. The resulting block polymers were soluble in an aqueous medium and also formed micelle‐like aggregates. Upon UV irradiation of aqueous solutions above the critical micelle concentration, an efficient crosslinking reaction occurred. Photoinduced structural changes of these polymer aggregates in the solution state were further investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Investigation of molecular motions of crosslinked polyepichlorohydrin by nuclear magnetic resonance spectroscopy

The molecular motion of crosslinked polyepichlorohydrin (PECH) is studied qualitatively by NMR techniques. The results of temperature dependence of ¹H T₂ and T₁ indicate that the crosslinking (crosslink density < 3%) restricts molecular motions of the polymer even far above its T_g. The ¹H T₁ minimum, corresponding to the large-scale chain-motion of crosslinked PECH, shifts to higher temperatures with increasing crosslink density. ¹H T₂ data also show that the crosslinking hinders free chain motions of the polymer above its T_g. The ¹³C T₁ relaxation time is sensitive to such motional changes as well. ¹³C linewidths of crosslinked PECHs vary with the crosslink density in both the swollen state and the solid state. The mechanism of ¹³C linewidth broadening of crosslinked polymers is discussed in detail. In the case of PECH, the linewidth broadening is caused by changing molecular environment due to crosslinking (such as presence of various chemical shift structures and freezing effects in conformational environment as chain mobility decreases), rather than increasing correlation times, which shorten the relaxation time (T₂) of polymer chains. © 1994 John Wiley & Sons, Inc.     

Preparation of soluble microgel by the copolymerization of methylmethacrylate with p-divinylbenzene in the presence of tetrabromomethane

Various types of soluble crosslinked polymers obtained from the copolymerization of methylmethacrylate (MMA) and p-divinylbenzene (p-DVB) in the presence of a transfer agent (CBr₄) have been discussed in relation to the variation of the structure during the reaction time. When [p-DVB]/[MMA] = 1.49 × 10^?3 and [CBr₄]/[MMA] = 1.28 × 10^?4, only linear polymers (primary polymer; M _n = 1.0 × 10⁵) with pendant vinyl groups are formed intially. Considerable branched structure is attained in rather large polymers (M _n = 2.5 × 10⁵), but the number of pendant double bonds is not enough to reach the gelation. As the concentration of the transfer agent becomes high, the intermolecular crosslinking is depressed, and the formed polymers contain loops and short chains. At [p – DVB]/[MMA] = 7.43 × 10^?3 and [CBr₄]/[MMA] = 1.28 × 10^?3, the shape of polymer with the same M _n became compact gradually with increasing reaction time. These results are considered to be useful for the preparation of soluble crosslinked polymer with controlled structure.     

Theoretical Phase Behavior of Crosslinked Polymers and Liquid Crystals

Equilibrium phase properties of mixtures of crosslinked polymers and nematic liquid crystals (LCs) are investigated. Effects of the volume fraction of polymer at crosslinking φ₀ , the number of monomers between consecutive crosslinks N_c and the Flory‐Huggins interaction parameter χ on these properties are discussed. Two models for the elastic free energy are used to describe the effects of φ₀ Three cases are considered depending upon polymer volume fraction at crosslinking. If crosslinking takes place in the bulk, the elastic free energy is the same and the two models are identical. Otherwise, either φ₀ is constant or equal to φ₂ , the two models may lead to completely different results depending upon crosslinking density. Strong correlations are found between the effects of φ₀ and N_c on the phase behavior of crosslinked polymers and nematic liquid crystal mixtures. These diagrams are also strongly dependent upon the Flory‐Huggins interaction parameter for isotropic mixing χ. This dependence is illustrated through three models for the variation of χ with temperature and composition.     

Star‐shaped cyclopolymers: A new category of star polymer with rigid cyclized arms prepared by controlled cationic cyclopolymerization and subsequent microgel formation of divinyl ethers

The combination of living/controlled cationic cyclopolymerization and crosslinking polymerization of bifunctional vinyl ethers (divinyl ethers) was applied to the synthesis of core‐crosslinked star‐shaped polymers with rigid cyclized arms. Cyclopolymerization of 4,4‐bis(vinyloxymethyl)cyclohexene ( 1 ), a divinyl ether with a cyclohexene group, was investigated with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in toluene at 0 °C. The reaction proceeded quantitatively to give soluble poly( 1 )s in organic solvents. The content of the unreacted vinyl groups in the produced polymers was less than ～3 mol%, and therefore, the degree of cyclization of the polymers was determined to be ～97%. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that living cyclopolymerization of 1 occurred. The chain linking reactions among the formed living cyclopolymers with 1,4‐bis(vinyloxy)cyclohexane ( 3 ) as a crosslinker in toluene at 0 °C produced core‐crosslinked star‐shaped cyclopoly( 1 )s [star‐poly( 1 )s] in high yield (100%). Dihydroxylation of the cyclohexene double bonds of star‐poly( 1 ) gave hydrophilic water‐soluble star‐shaped polymers with rigid arm structure [star‐poly( 1 )‐OH] with thermo‐responsive function in water. T_gs of star‐poly( 1 ) and star‐poly( 1 )‐OH were 135 °C and 216 °C, respectively; these values are very high as vinyl ether‐based star‐shaped polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1094–1102     

Photovoltaic properties of the polymer solar cells comprising crosslinked maleimide polymers and fullerene‐derivative PCBM

A series of crosslinkable maleimide conjugated polymers with different vinyl group contents as side‐chain crosslinking sites have been synthesized by the Suzuki coupling reaction. Polymer solar cells (PSCs) were fabricated based on an interpenetrating network of the crosslinkable maleimide polymers as the electron donor, and a fullerene derivative, (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM), as the electron acceptor. The crosslinkable maleimide polymers underwent crosslinking reaction at the side‐chain vinyl groups upon the thermal treatment with or without the addition of initiator, azobisisobutyronitrile (AIBN). Better photovoltaic (PV) performances were obtained for the PSCs based on the polymer crosslinking without using initiator, whereas poorer PV performances were observed for the PSCs based on the polymer crosslinking with the AIBN initiator. In addition, higher operational stability was observed for the crosslinked polymer based solar cell as compared to the solar cell based on the un‐crosslinked polymer. The photo‐physical and PV properties of the cross‐linked maleimide polymers/PCBM based PSCs are discussed in detail as the morphology and crosslinking density of the polymers are taken into account. Copyright © 2010 John Wiley & Sons, Ltd.     

Crosslinkable maleimide copolymers for stable NLO properties

Second-order, nonlinear optical polymers based on epoxy-substituted methylvinylisocyanates and N-substituted maleimides were synthesized and characterized with spectral and thermal analysis. The photocrosslinking and thermal-crosslinking reactions of copolymers with different chromophore contents were studied. Thermally induced crosslinking during the poling process, performed at the glass-transition temperature (T_g), was prevented by T_g being decreased through the addition of a plasticizer. Electrooptic coefficients (r₃₃), measured for crosslinked and noncrosslinked systems, had similar absolute values and relaxation dynamics. This behavior was explained in terms of the similar rotational mobility of the chromophore units and the paucity of crosslinking sites. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1589–1595, 2001     

Linear polymers of some vinyl monomers containing a terminal acetylenic group

The synthesis and polymerization of representative acrylic-type esters containing a terminal acetylene group, CH₂?C(R)COO(CHR′)_m? C?CH, where R and R′ are H and CH₃ and m = 1 or 2, by anionic initiation to linear polymers are described. In contrast, crosslinked polymers were formed when radical and cationic initiators were used. Crosslinked polymers were also obtained with organolithium compounds but not with sodium naphthalene and sodium benzalaniline; this observation is discussed and compared to the behavior of the acetylenic acrylic esters which do not contain a terminal acetylenic hydrogen. The unpolymerized acetylenic bonds in the resulting linear polymers were shown to be present by infrared spectroscopic methods and by the following post-reactions of these bonds: (1) the heat- and radical-initiated crosslinking of the polymers through the acetylenic bonds; (2) the post-bromination of the acetylenic bonds; and (3) the reaction of decaborane with the acetylenic bonds. The anionic copolymerization of acrylonitrile and styrene with these acetylenic monomers were performed and compared to the copolymerizations with 1-acryloxy-2-butyne and 1-methacryloxy-2-butyne. Dibromination of the linear polymers affords self-extinguishing polymers, while decaboronation yields soluble polymers which do not soften up to 300°C. The linear polymers may be classified as “self-reactive” polymers which yield thermosetting polymers.     

Novel Crosslinked Guest-Host System with Stable Second-Order Nonlinearity

Abstract

An epoxy-based nonlinear optical (NLO) polymeric material incorporating 4-(4′-nitrophenylazo) phenylamine has been synthesized and subsequently functionalized with acryloyl groups. A glass transition temperature (T ₈)of 108°C and a degradation temperature (air) of 251°C were recorded. After crosslinking at 160°C for 2 hours, the T ₈ of the polymer increased to 146°C. In order to increase the nonlinear optical chromophore concentration and the crosslinking density, the crosslink-able NLO dye, 2,4-acryloyloxy (4′-phenylazo nitrobenzene), was processed and poled in this epoxy-based NLO material matrix in a manner similar to a typical guest-host system, and thermally crosslinked under the above condition in the poled phase. The crosslinked guest-host material was found to be amorphous with a T ₈ of approximately 132°C. It also exhibits a second-order nonlinear optical coefficient d ₃₃ of 14.14 pm/V at a maximum doping level of 33% by weight of the NLO dye, and retains 93% of its original d ₃₃ value after being subjected to thermal treatment at 100°C for 168 hours. The behavior of the crosslinked polymer and the crosslinked guest-host polymer is discussed.     

Lignin,a biomass crosslinker,in a shape memory polycaprolactone network

This work reports a new direction of natural lignin valorization, which utilizes lignin to produce crosslinked polycaprolactone (PCL) via a straightforward synthesis. Lignin's hydroxyl groups of its multibranched phenolic structure allow lignin to serve as crosslinkers, whereas the aromatic groups serve as hard segments. The modified natural lignin containing alkene terminals is crosslinked with a thiol‐terminal PCL via Ru‐catalyzed photoredox thiol‐ene reaction. The high rate of gel contents measured for all crosslinked polymers, with the least being 84% of gel content, indicates efficient crosslinking. The prepared flat rectangular shape lignin‐crosslinked PCL sample demonstrates rapid thermal responsive shape memory behavior at 10 °C and 80 °C showing interconversion between a permanent and temporary shape. The melting temperature of the lignin‐crosslinked PCL is tunable by varying the percent weight of lignin. The 11, 21, and 30 wt % lignin demonstrated T_m of 42 °C, 35 °C, and 26 °C, respectively. The role of lignin as a crosslinker presented in this work suggests that lignin can serve as an efficient biomass‐based functional additive to polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2121–2130     

Preparation and characteristics of photocrosslinkable hydrophilic polymer having cinnamate moiety

The reaction of copolymer of N,N-dimethylacrylamide (DMAA) and bromoethyl methacrylate with potassium cinnamate produced water-soluble photosensitive polymers. Photosensitive polyDMAA films were irradiated with a 400 W high-pressure mercury lamp (λ > 280 nm) to produce crosslinked polymers, which were swollen in water. The degree of swelling was controlled by the irradiation time and content of cinnamate moieties in copolymers. Higher cinnamoylation and longer irradiation time resulted in higher yield of crosslinked polymers and less swellability. Partial degelation upon irradiation at λ ～ 254 nm was observed. The advantage of gelation via photodimerization over conventional chemical crosslinking methods is discussed in conjunction with biomedical applications. © 1992 John Wiley & Sons, Inc.     

Studies on the thermotropic liquid-crystalline polymer. IX. Synthesis and properties of crosslinkable copoly(amide-ester)s containing conjugated double bonds

Four series of copoly(amide-ester)s containing conjugated double bonds were prepared by using direct polycondensation in the presence of diphenylchlorophosphate (DPCP) and pyridine. Series I–III were prepared from para, meta-aminophenol, or their mixture with p-phenylene bis(acrylic acid) (PPBA), p-carboxylic cinnamic acid (PCCA), and stilbenedicarboxylic acid (SDBA), respectively. Series IV was prepared from a mixture of aminophenols [2-methyl 4-aminophenol (MePAP) and m-aminophenol (MAP)] with a mixture of diacids (PPBA and SDBA). Thermotropic liquid-crystalline behavior of these polymers was studied by differential scanning calorimetry (DSC), and optical polarizing microscopy equipped with a heating stage. Series I , series II , and P40–P100 of series IV could undergo crosslinking reaction by heating. However, series III could undergo crosslinking reaction only by photoirradiation upon heating. After crosslinking reaction occurred, the properties of these polymers were also examined by DSC, TGA, WAXD, and IR. The synthesized polymers could be crosslinked in the liquid-crystalline phase with retention of the order in the final crosslinked solid. © 1993 John Wiley & Sons, Inc.     

Poly(Ether sulfone)s made from 4,4′-dihydroxystilbene and 4,4′-difluorodiphenylsulfone: Synthesis,crosslinking, and epoxidation with hydrogen peroxide

High molecular weight polymers from trans-4,4′-dihydroxystilbene, bisphenols, and 4,4′-difluorodiphenylsulfone were synthesized by a nucleophilic displacement reaction using DMAc as solvent in the presence of potassium carbonate. Characterization and crosslinking studies of these polymers were carried out by DSC, TGA, TMA, x-ray diffraction, and solution and solid NMR. It was found that all polymers can be crosslinked to some extent on heating to 350°C. We also studied the epoxidation of these polymers with hydrogen peroxide in the presence of methyltrioctylammonium tetrakis (diperoxotungsto) phosphate (3—) as the catalyst in a biphasic system. The epoxidized polymers are thermally cross-linkable. Very efficient crosslinking was obtained by heating the epoxidized polymers at 350°C under nitrogen. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of photocrosslinked poly(ε‐caprolactone)s showing shape‐memory properties

Poly(ε‐caprolactone) (PCL) with a pendent coumarin group was prepared by solution polycondensation from 7‐(3,5‐dicarboxyphenyl) carbonylmethoxycoumarin dichloride and α, ω‐dihydroxy terminated poly(ε‐caprolactone) with molecular weights of 1250, 3000, and 10,000 g/mol. These photosensitive polymers underwent a rapid reversible photocrosslinking upon exposure to irradiation with alternating wavelengths (>280/254 nm) without a photoinitiator. The thermal and mechanical properties of the photocrosslinked films were examined by means of differential scanning calorimetry and stress–strain measurements. The crosslinked films exhibited elastic properties above the melting temperature of the PCL segment along with significant decrease in the ultimate tensile strength and Young's modulus. Shape‐memory properties such as strain fixity ratio (R_f) and strain recovery ratio (R_r) were determined by means of a cyclic thermomechanical tensile experiments under varying maximum strains (ε_m = 100, 300, and 500%). The crosslinked ICM/PCL‐3000 and ‐10,000 films exhibited the excellent shape‐memory properties in which both R_f and R_r values were 88–100% for tensile strain of 100–500%; after the deformation, the films recovered their permanent shapes instantaneously. In vitro degradation was performed in a phosphate buffer saline (pH 7.2) at 37 °C with or without the presence of Pseudomonas cepacia lipase. The presence of the pendent coumarin group and the crosslinking of the polymers pronouncedly decreased the degradation rate. The crosslinked biodegradable PCL showing a good shape‐memory property is promising as a new material for biomedical applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2422–2433, 2009     

Synthesis and crosslinking of hyperbranched poly(n‐nonyl acrylate) to form organogels

(2‐Bromo‐n‐nonan‐1‐oxycarbonyl)ethyl acrylate was synthesized as an inimer for self‐condensing vinyl polymerization (SCVP) to produce hyperbranched poly(n‐nonyl acrylate), either as a homopolymer or as a copolymer with n‐nonyl acrylate. The inimer was homopolymerized and copolymerized by atom transfer radical polymerization (ATRP) and activator generated by electron transfer ATRP to produce soluble polymers with broad polydispersities (up to ? = 9.91), which is characteristic of hyperbranched polymers produced by SCVP. The resulting hyperbranched (co)polymers were crosslinked by atom transfer radical coupling in both one‐pot and two‐step procedures. The radical–radical crosslinking reaction is extremely efficient, resulting in hard plastic particles from the homopolymer of (2‐bromo‐n‐nonan‐1‐oxycarbonyl)ethyl acrylate synthesized in bulk. Crosslinked organogels that swell in tetrahydrofuran were formed when the rate of crosslinking decreased using acetonitrile solutions. Dynamic shear and stress relaxation experiments demonstrated that the dry network behaves as a covalently crosslinked soft gel, with a glass transition at ?50 °C according to differential scanning calorimetry. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2399–2410     

New soybean oil–styrene–divinylbenzene thermosetting copolymers. II. Dynamic mechanical properties

A variety of new polymeric materials ranging from soft rubbers to hard, tough, and brittle plastics were prepared from the cationic copolymerization of regular soybean oil, low saturation soybean oil (LoSatSoy oil), or conjugated LoSatSoy oil with styrene and divinylbenzene initiated by boron trifluoride diethyl etherate (BF₃ · OEt₂) or related modified initiators. The relationship between the dynamic mechanical properties of the various polymers obtained and the stoichiometry, the types of soybean oils and crosslinking agents, and the different modified initiators was investigated. The room‐temperature storage moduli ranged from 6 × 10⁶ to 2 × 10⁹ Pa, whereas the single glass‐transition temperatures (T_g) varied from approximately 0 to 105 °C. These properties were comparable to those of commercially available rubbery materials and conventional plastics. The crosslinking densities of the new polymers were largely dependent on the concentration of the crosslinking agent and the type of soybean oil employed and varied from 74 to 4 × 10⁴ mol/m³. The T_g increased and the intensity of the loss factor decreased irregularly with an increase in the logarithmic crosslinking densities of the polymers. Empirical equations were established to describe the effect of crosslinking on the loss factor in these new polymeric materials. The polymers based on conjugated LoSatSoy oil, styrene, and divinylbenzene possessed the highest room‐temperature moduli and T_g 's. These new soybean oil polymers appear promising as replacements for petroleum‐based polymeric materials. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2721–2738, 2000     

Cationic polymerization of 1,3-pent adiene in the presence of arenes

The cationic polymerizations of 1,3-pentadiene initiated by AlCl3 in n-hexane at 30℃ have been carried out in the presence of various arenes,i.e.,benzene,toluene,p-xylene,o-xylene,m-xylene and mesitylene.The presence of all these arenes have reduced in different degrees the formation of crossliuked products.Namely,the crosslinking reaction,a major side-reaction during the cationic polymerization of 1,3-pentadiene,has been suppressed by adding the aromatic compounds.The results showed that a chain transfer to arene took place and this transfer process hindered the generation of the crosslinked polymer.IR and 1H NMR spectra have confirmed the existence of the corresponding aryl groups in the resulting polymers.     

Ultraviolet‐induced crosslinking of poly(butylene succinate) and its thermal property,dynamic mechanical property,and biodegradability

Crosslinking is an effective way to improve polymer properties. This paper focuses on ultraviolet‐induced crosslinking of poly(butylene succinate) (PBS) in the presence of a photoinitiator and a crosslinking agent at ambient temperature. The effects of the concentration of photoinitiator, the crosslinking agent content, and the irradiation time on the crosslink behavior were investigated. To obtain an appropriate gel fraction in different irradiation times, 3.0 wt% of photoinitiator and 10.0 wt% of crosslinking agent were proved to be the optimum choice. Furthermore, properties such as thermal properties, dynamic mechanical property, and enzymatic degradation of PBS before and after crosslinking were examined. Differential scanning calorimetry (DSC) analysis revealed that glass transition temperature (T_g) increased with increase in gel fraction, while melting temperature (T_m) and the degree of crystallinity decreased. This may be caused by the reduced molecular chain mobility and inhibited molecular motion for crystallization in crosslinked samples. The crosslinked polymer also showed improved thermal stability and dynamic mechanical property. In addition, the introduction of crosslinking retarded the enzymatic degradation rate of PBS, but it was still biodegradable. The improved properties of crosslinked PBS will extend the application of PBS. Copyright © 2009 John Wiley & Sons, Ltd.