A Gel Polymer Electrolyte with 2D Filler-reinforced for Dendrite Suppression Li-Ion Batteries

Gel polymer electrolytes (GPEs) incorporate both the high ionic conductivity of organic liquid electrolyte and the high safety performance of all-solid-state electrolytes (ASSEs), greatly improving the electrochemical performance of solid polymer electrolytes (SPEs). However, the practical application of GPEs is still limited by inferior interface compatibility, lithium dendrites, etc. Herein, we prepared GPEs based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) further co-blended the two-dimensional sheet inorganic filler hectorite and poly(methyl methacrylate) (PMMA) to improve the mechanical and electrochemical properties of the GPEs. When the content of PMMA and hectorite is optimal, this GPEs have an ionic conductivity of 1.06×10⁻³ S cm⁻¹ and outstanding lithium symmetric cells cycle time of more than 3000 h, indicating that the introduction of filler effectively inhibits the growth of lithium dendrites at room temperature. Moreover, the GPEs adopt a relatively simple solution casting method to provide a fresh idea for the synthesis of high-performance GPEs.     

The network gel polymer electrolyte based on poly(acrylate-co-imide) and its transport properties in lithium ion batteries

Poly (acrylate-co-imide)-based gel polymer electrolytes are synthesized by in situ free radical polymerization. Infrared spectroscopy confirms the complete polymerization of gel polymer electrolytes. The ionic conductivity of gel polymer electrolytes are measured as a function of different repeating EO units of polyacrylates. An optimal ionic conductivity of the poly (PEGMEMA₁₁₀₀-BMI) gel polymer electrolyte is determined to be 4.8 × 10^–3 S/cm at 25 °C. The lithium transference number is found to be 0.29. The cyclic voltammogram shows that the wide electrochemical stability window of the gel polymer electrolyte varies from −0.5 to 4.20 V (vs. Li/Li⁺). Furthermore, we found the transport properties of novel gel polymer electrolytes are dependent on the EO design and are also related to the rate capability and the cycling ability of lithium polymer batteries. The relationship between polymer electrolyte design, lithium transport properties and battery performance are investigated in this research.     

Review on gel polymer electrolytes for lithium batteries

This paper reviews the state-of-art of polymer electrolytes in view of their electrochemical and physical properties for the applications in lithium batteries. This review mainly encompasses on five polymer hosts namely poly(ethylene oxide) (PEO), poly(acrylonitrile) (PAN), poly(methyl methacrylate) (PMMA), poly(vinylidene fluoride) (PVdF) and poly(vinylidene fluoride-hexafluoro propylene) (PVdF-HFP) as electrolytes. Also the ionic conductivity, morphology, porosity and cycling behavior of PVdF-HFP membranes prepared by phase inversion technique with different non-solvents have been presented. The cycling behavior of LiMn₂O₄/polymer electrolyte (PE)/Li cells is also described.     

High ionic conductivity of all-solid polymer electrolytes based on polyorganophosphazenes

A series of all-solid polymer electrolytes were prepared by cross-linking new designed poly(organophosphazene) macromonomers. The ionic conductivities of these all-solid, dimensional steady polymer electrolytes were reported. The temperature dependence of ionic conductivity of the all-solid polymer electrolytes suggested that the ionic transport is correlated with the segmental motion of the polymer. The relationship between lithium salts content and ionic conductivity was discussed and investigated by Infrared spectrum. Furthermore, the polarity of the host materials was thought to be a key to the ionic conductivity of polymer electrolyte. The all-solid polymer electrolytes based on these poly(organophosphazenes) showed ionic conductivity of 10⁻⁴ S cm⁻¹ at room temperature.     

New approaches to developing lithium polymer batteries

The electrochemical and physical-chemical properties of two families of lithium ion conducting membranes, i.e., the blends between high molecular weight poly(ethylene oxide) with a lithium salt commonly named "polymer electrolytes" and the gels of liquid solutions in a polymer matrix commonly named "gel electrolytes," are repoted and discussed. Particular attention is devoted to the newly developed approach of dispersing ceramic powders at the nanoscale particle dimension into the two types of membranes. This leads "nanocomposite" membranes having unique features, such as improved transport and interfacial properties in the case of the polymer electrolytes and enhanced liquid retention capability in the case of the gel electrolytes. Finally, the use of the gel electrolytes for the development of new-design, plastic-like, lithium-ion batteries is illustrated.     

Highly conductive oriented PEO-based polymer electrolytes

This contribution presents an overview of the study of the effect of stretching on semicrystalline and amorphous complexes of poly(ethylene oxide) (PEO) with different salts, such as lithium iodide, lithium trifluoromethane-sulfonate, lithium hexafluoroarsenate, lithium bis(oxalato)borate and lithium trifluoromethanesulfonimide. In spite of the conventional belief that ion transport in polymer electrolytes (PE) is mediated primarily by polymer segmental motion, we suggest that ion transport occurs preferentially along the PEO helical axis, at least in the crystalline phase. It was found that the more amorphous the PE, the less its lengthwise conductivity is influenced by stretching. It is suggested that the rate-determining step of ion conduction in semicrystalline LiX:P(EO)₂₀, polymer electrolytes below the melting point (T_m) is “interchain” hopping.     

Laser Raman and FTIR studies on Li+ interaction in PVAc-LiClO4 polymer electrolytes

The polymer electrolytes composed of poly(vinyl acetate) (PVAc) with various stoichiometric ratios of lithium perchlorate (LiClO(4)) salt have been prepared by solution casting method. The techniques Fourier transform infra-red (FTIR) and Laser Raman spectroscopy have been used to monitor polymer-salt complex formation, ion-ion and ion-polymer interactions as a function of salt concentration. Significant changes in both Laser Raman and FTIR spectra are observed which reveals an interaction between ester oxygens with lithium cation coordination. These results strongly suggest the interaction of lithium cation and network polymer chains. When the salt content is increased, the intensity of the internal Raman modes of the ClO(4)(-) increases. The ClO(4)(-) stretching mode observed at 934 cm(-1) in Laser Raman shows some additional shoulder peaks with increase in salt concentration. This reveals the presence of free anions, ion contact pairs and higher order ionic clusters. From the FTIR and Laser Raman results the transport mechanism of ions in PVAc:LiClO(4) polymer electrolytes has been discussed.     

纳米复合全固态聚膦腈电解质

为了进一步提高聚合物电解质的室温离子电导率和锂离子的迁移数,通过对纳米二氧化硅的表面修饰,并采用可聚合的带氧化乙烯-氧化丙烯共聚侧链取代的聚膦腈大单体制备了纳米复合的全固态电解质.通过X射线光电子能谱,扫描电镜,差热扫描分析对纳米复合电解质的性能和形貌进行了分析,并通过交流阻抗考察了电解质与电极间的界面稳定性,用循环伏安表征了电解质的电化学稳定窗口,考察了锂盐含量对电解质离子电导率的影响,测试了电解质的离子电导率随温度的关系,并对锂离子的迁移数进行了测定.研究结果表明,通过纳米复合的方法,提高了聚合物电解质的离子电导率,降低了界面电阻,提高了锂离子迁移率.     

Ionic‐Liquid‐Based Polymer Electrolytes for Battery Applications

The advent of solid‐state polymer electrolytes for application in lithium batteries took place more than four decades ago when the ability of polyethylene oxide (PEO) to dissolve suitable lithium salts was demonstrated. Since then, many modifications of this basic system have been proposed and tested, involving the addition of conventional, carbonate‐based electrolytes, low molecular weight polymers, ceramic fillers, and others. This Review focuses on ternary polymer electrolytes, that is, ion‐conducting systems consisting of a polymer incorporating two salts, one bearing the lithium cation and the other introducing additional anions capable of plasticizing the polymer chains. Assessing the state of the research field of solid‐state, ternary polymer electrolytes, while giving background on the whole field of polymer electrolytes, this Review is expected to stimulate new thoughts and ideas on the challenges and opportunities of lithium‐metal batteries.     

复合型聚合物电解质的研究进展

综述了通过物理改性的方法制成的复合型聚合物电解质（ＣＰＥ）的研究进展,并介绍了ＣＰＥ薄膜的制备工艺,以及ＣＰＥ应用在聚合物二次锂电池中的最新成果。     

Influence of PEG-borate ester on thermal property and ionic conductivity of the polymer electrolyte

We have focused on the poly(ethylene glycol) (PEG)-borate ester as a new type plasticizer for solid polymer electrolyte for lithium ion secondary battery. Adding the PEG-borate ester into the electrolyte shows the increase in the ionic conductivity of the polymer electrolyte. By measuring the glass-transition temperature of the polymer electrolytes with DSC, it is found that the increase in ionic conductivity of the polymer electrolyte is due to the increase in ionic mobility. By investigating the temperature dependence of the ionic conductivity of the polymer electrolytes using William-Landel-Ferry type equation, we considered that the PEG-borate ester does not have any influence for dissociation of Li-salt. This revised version was published online in August 2006 with corrections to the Cover Date.     

聚合物电解质界面性质交流阻抗研究

合成了一种新型聚合物基质材料聚(甲基丙烯酸甲酯-丙烯腈-甲基丙烯酸锂)(简记为PMAML),并以PMAML/PVDF-HFP(偏氟乙烯-六氟丙烯共聚合物)复合物为基质制备了聚合物电解质.利用FTIR对合成的PMAML进行结构表征,并用扫描电镜观察聚合物基质膜的表面形貌.聚合物电解质由聚合物基质膜浸渍电解质溶液得到,其室温电导率可达到2.6×10－3 S• cm－1.利用交流阻抗技术研究了聚合物电解质与锂电极间的界面性质,并考察了开路放置时间、循环伏安及恒流充电对界面阻抗的影响.结果表明,聚合物电解质与锂电极界面阻抗随放置时间的延长而增加,更新锂电极表面可降低界面阻抗,PMAML能提高界面稳定性.     

Composite gel membranes: a new class of improved polymer electrolytes for lithium batteries

Novel composite, gel-type polymer electrolytes have been prepared by dispersing selected ceramic powders into a matrix formed by a lithium salt solution contained in a poly(acrylonitrile) (PAN) network. The electrochemical characterization demonstrates that these new types of composite gel electrolytes have high ionic conductivity, wide electrochemical stability and, particularly, high chemical integrity (no liquid leakage) even at temperatures above ambient. These unique properties make the composite gel membranes particularly suitable as electrolyte separators in lithium ion polymer batteries.     

Preparation and ionic conductivities of the plasticized polymer electrolytes based on poly(methyl methacrylate-co-alkali metal methacrylate)

Ionic conductivities of the polymer electrolytes prepared from the ionomer (poly(methyl methacrylate-co-alkali metal methacrylate)), lithium perchlorate, and ethylene carbonate as a plasticizer, were studied as a function of the ion content and the alkali-metal cation of the ionomer. It was possible to obtain tough films with room-temperature ionic conductivities of ∼ 10^-3 S/cm. The maximum ion conductivities of the polymer electrolytes were obtained at the ion content of 5 mol % for both Li and Na ionomer. The effects of the ion content of the ionomer on the ionic conductivities of the polymer electrolytes were mainly interpreted in terms of the characteristics of the ion aggregate formed in the polymer electrolytes. The thermal dependence of the ionic conductivity was shown to be a non-VTF pattern in some of the polymer electrolytes investigated, which is expected to be due to the presence of the ion aggregate. © John Wiley & Sons, Inc.     

聚苯并咪唑-锂盐-聚乙二醇单甲醚共混全固态聚合物电解质的制备及性能

使用共混后浇铸成膜的方法,制备了聚苯并咪唑-锂盐-聚乙二醇单甲醚组成的锂离子电池共混全固态聚合物电解质。通过傅里叶红外光谱(FT-IR)、X射线衍射(XRD)、差示扫描量热(DSC)、拉伸与交流阻抗测试表征了共混全固态电解质的结构与性能。研究了不同锂盐以及各组分含量对共混全固态电解质的力学性能与电导率的影响。结果表明:聚苯并咪唑与聚乙二醇单甲醚之间存在氢键;共混全固态电解质中聚乙二醇单甲醚处于无定形态;锂盐的加入使聚乙二醇单甲醚的玻璃化转变温度下降;聚乙二醇单甲醚含量越高,共混膜强度越低,电导率越高,并且使用三氟甲磺酸锂作为锂盐时其电导率最高,室温下可以达到3.58×10~(-5) S/cm,高温下可以达到3.3×10~(-3) S/cm,高温下满足对锂离子电池的使用需求。     

Thermal behavior of new polymer electrolytes

Solid polymer electrolytes (SPE) have been identified as a class of materials which could enable the fabrication of high energy density solid state lithium rechargeable batteries which could meet the performance requirements for advanced portable electronic and automotive applications. In order to achieve this goal, novel SPE systems having high ionic conductivity and good mechanical properties at or near ambient temperature must be developed. Novel lithium salts believed to be useful in realizing this objective have recently been proposed. The thermal behavior of SPE systems based on high molecular weight poly(ethylene oxide) (PEO) and on two novel salts, the lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and the lithium tris(trifluoromethylsulfonyl)-methanide (LiTSFM) is reported and compared with the thermal behavior of the high molecular weight PEO–lithium trifluoromethane sulfonate (LiTFLT) SPE system. Phase diagrams for the PEO–LiTFSI and PEO–LiTFSM SPE systems have been established and are discussed in terms of their impact on SPE-based rechargeable lithium battery technologies. The use of a novel plasticizer in conjunction with the PEO–LiTFSI-based SPE system is reported and it is shown how this modifies the thermal behavior of the PEO–LiTFSI SPE system.     

不同锂盐对超支化/梳状复合型聚合物电解质的性能影响研究

利用PVA侧链上的羟基的化学活性, 采用超支化聚胺-酯对改性纳米SiO₂和PVA接枝改性, 并加入不同锂盐,制备了SiO₂-g-HBPAE/PVA-g-HBPAE超支化/梳状复合型聚合物电解质, 利用SEM观察了纳米粒子在基体中的分散情况, 采用DSC、拉伸实验以及介电谱研究了锂盐种类及添加量对复合体系性能的影响. 结果表明, 超支化接枝改善了SiO₂和基体的界面相容性; 磺酸类锂盐在复合材料中表现出自增塑现象, 材料的玻璃化转变温度(T_g)大幅度下降; LiClO₄在基体中的离解能力强于LiCF₃SO₃和 LiN(SO₃CF₃)₂; 当LiCF₃SO₃添加量为20 %(by mass, 下文同)时, 聚合物电解质的室温电导率达到最大值2.58×10^-6 S•cm^-1.     

无机粒子-高分子复合固体电解质的研究进展

综述了锂离子电池用无机粒子 高分子复合固体电解质方面的研究进展 ,对复合电解质的种类、无机复合粒子的作用和电解质在锂电池方面的应用情况进行了评述。     

Highly concentrated polycarbonate‐based solid polymer electrolytes having extraordinary electrochemical stability

Solid polymer electrolytes (SPEs) are compounds of great interest as safe and flexible alternative ionics materials, particularly suitable for energy storage devices. We study an unusual dependence on the salt concentration of the ionic conductivity in an SPE system based on poly(ethylene carbonate) (PEC). Dielectric relaxation spectroscopy reveals that the ionic conductivity of PEC/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) electrolyte continues to increase with increasing salt concentration because the segmental motion of the polymer chains is enhanced by the plasticizing effect of the imide anion. Fourier transfer‐infrared (FTIR) spectroscopy suggests that this unusual phenomenon arises because of a relatively loose coordination structure having moderately aggregated ions, in contrast to polyether‐based systems. Comparative FTIR study against PEC/lithium perchlorate (LiClO₄) electrolytes suggests that weak ionic interaction between Li and TFSI ions is also important. Highly concentrated electrolytes with both reasonable conductivity and high lithium transference number (t₊) can be obtained in the PEC/LiTFSI system as a result of the unusual salt concentration dependence of the conductivity and the ionic solvation structure. The resulting concentrated PEC/LiTFSI electrolytes have extraordinary oxidation stability and prevent any Al corrosion reaction in a cyclic voltammetry. These are inherent effects of the highly concentrated salt. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2442–2447     

Lithium environment in dilute poly(ethylene oxide)/lithium triflate polymer electrolyte from REDOR NMR spectroscopy

The role of the lithium ion environment is of fundamental interest regarding transport and conductivity in lithium polymer electrolytes. X-ray crystallography has been used to characterize the lithium environment in completely crystalline poly(ethylene oxide) (PEO) electrolytes, but this approach cannot be used with dilute PEO electrolytes. Here, using solid-state NMR data collected with the rotational-echo double-resonance 13C[7Li] (REDOR) pulse sequence, we have been able to characterize the crystalline microdomains of a PEO-lithium triflate sample with an oxygen/lithium ratio of 20:1. Our data clearly demonstrates that the lithium crystalline microdomains are nearly identical to those of a completely crystalline 3:1 sample, for which the crystal structure is known.