Synthesis,characterization, and properties of amphiphilic chitosan copolymers with mixed side chains by click chemistry

Novel amphiphilic chitosan copolymers with mixed side chains of poly(ε‐caprolactone) and poly(ethylene oxide) (CS‐g‐PCL/PEO) were successfully synthesized by “graft to” approach via click chemistry. The melting and crystallization behaviors and crystalline morphology of CS‐g‐PCL/PEO copolymers can be adjusted by the alteration of the feed ratio of PCL and PEO segments. CS‐g‐PCL/PEO copolymers revealed crystalline morphology different from that of linear alkynyl PCL and alkynyl PEO due to the influence of brush structure of copolymers and the mutual influence of PCL and PEO segments. The hydrophilicity of the CS copolymers can be improved and adjusted by the alteration of the composition of PCL and PEO segments. Moreover, the CS copolymers can self‐assemble into spherical micelles in aqueous solution. Investigation shows that the size of the CS copolymer micelles increased with the increase of the content of hydrophobic PCL segments in copolymers, which indicated that the micellar behavior of the copolymers can be controlled by the adjustment of the ratio of PCL and PEO segments in copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3476–3486, 2010     

Stimuli‐responsive reversible physical networks. I. Synthesis and physical network properties of amphiphilic block and random copolymers with long alkyl chains by living cationic polymerization

The living cationic polymerization of octadecyl vinyl ether (ODVE) was achieved with an 1‐(isobutoxy)ethyl acetate [CH₃CH(OiBu)OCOCH₃]/EtAlCl₂ initiating system in hexane in the presence of an added weak Lewis base at 30 °C. In contrast to conventional polymers, poly(octadecyl vinyl ether) underwent upper‐critical‐solution‐temperature‐type phase separation in various solvents, such as hexane, toluene, CH₂Cl₂, and tetrahydrofuran, because of the crystallization of octadecyl chains. Amphiphilic block and random copolymers with crystallizable substituents of ODVE and 2‐methoxyethyl vinyl ether (MOVE) were synthesized via living cationic polymerization under similar conditions. Aqueous solutions of the copolymers yielded physical gels upon cooling because of strong interactions between ODVE units, regardless of the copolymer structure. The product gels, however, exhibited different viscoelastic properties: A 20 wt % solution of a block copolymer (400/20 MOVE/ODVE) became a soft physical gel that behaved like a typical gel, whereas the corresponding random copolymer gave a transparent but stiff gel with a certain relaxation time. Differential scanning calorimetry analysis confirmed that the crystalline–amorphous transition of the octadecyl chains was a key step for inducing such physical gelation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1155–1165, 2005     

Synthesis and properties of poly(ethylene oxide)‐grafted polyethylene copolymer and terpolymer

A series of graft copolymers were synthesized based on ethylene‐co‐m,p‐methylstyrene (EMS) (backbone copolymer), ethylene‐1‐hexene‐m,p‐methylstyrene (EHMS) (backbone terpolymer), and polyethylene glycol monomethyl ethers (PEGM) (grafts) in this study. The PEGMs with molecular weights of 750 and 2000 were used. The chemical composition of the graft copolymers was analyzed by NMR and DSC measurements. The graft copolymers exhibited a phase‐separated morphology with the backbone and the methoxy polyethylene glycol (MPEG) grafts forming separate crystalline phases. The MPEG phase had a melting temperature lower than the corresponding MPEG homopolymer, as determined by DSC. The melting point of the crystalline phase formed by the EMS and EHMS main chains was lower than that of pure polymer backbone. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Side‐chain crystallization behavior of graft copolymers consisting of amorphous main chain and crystalline side chains: Poly(methyl methacrylate)‐graft‐poly(ethylene glycol) and poly(methyl acrylate)‐graft‐poly(ethylene glycol)

Graft copolymers consisting of amorphous main chain, poly(methyl methacrylate) (PMMA), or poly(methyl acrylate) (PMAc), and crystalline side chains, poly(ethylene glycol) (PEG), have been prepared by copolymerization of PEG macromonomers with methyl methacrylate or methyl acrylate (MMAx or MACx, respectively). Because of the compatibility of PMMA/PEG and PMAc/PEG, from small‐angle X‐ray scattering results, the main and side chains in graft copolymers were suggested to be homogeneous in the molten state. Differential scanning calorimetry (DSC) cooling scans revealed that PEG side chains for graft copolymers with large PEG fractions were crystallized when the sample was cooled, with a cooling rate of 10 °C/min. The spherulite pattern observed by a polarized optical microscope suggested the growth of PEG crystalline lamellae. Crystallization of PEG in MMAx was more restrained than in MACx. From these results, we have concluded that the crystallization behavior of the grafted side chains is strongly influenced by the glass transition of a homogeneously molten sample as well as dilution of the crystallizable chains. Domain spacings for isothermally crystallized graft copolymers were described by interdigitating chain packing in crystalline–amorphous lamellar structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 79–86, 2005     

Thermal and mechanical analysis of metallocene‐catalyzed ethene–α‐olefin copolymers: The influence of the length and number of the crystallizing side chains

Copolymers of ethene and 1‐octene, 1‐dodecene, 1‐octadecene, and 1‐hexacosene were carried out with [Ph₂C(2,7‐di‐^tertBuFlu)(Cp)]ZrCl₂/methylalumoxane as a catalyst to obtain short‐chain branched polyethylenes with branch lengths of 6–26 carbon atoms. This catalyst provided high activity and a very good comonomer and hydrogen response. In this study, the influence of the length and number of the side chains on the mechanical properties of the materials was investigated. The crystalline methylene sequence lengths of the copolymers and lamellar thicknesses were calculated after the application of a differential scanning calorimetry/successive self‐annealing separation technique. By dynamic mechanical analysis, the storage modulus as an indicator of the stiffness and the loss modulus as a measure of the effect of branching on the α and β relaxations were studied. The results were related to the measurements of the polymer density and tensile strength to determine the effect of longer side chains on the material properties. The hexacosene copolymers had side chains of 24 carbons and remarkable material properties very different from those of conventional linear low‐density polyethylenes. The side chains of these copolymers crystallized with one another and not only parallel to the backbone lamellar layer, depending on the hexacosene concentration in the copolymer. The side chains crystallized even at low hexacosene concentrations in the copolymer. A transfer of these results to 16 carbons side chains in ethene–octadecene copolymers was also possible. © 2006 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1600–1612, 2006     

Aluminum complex initiated copolymerization of lactones and DL‐lactide to form crystalline gradient block copolymers containing stereoblock lactyl chains

The homopolymerization reactions of several lactones, as well as the copolymerization reactions of DL‐lactide with these lactones were investigated using tridentate Schiff base aluminum complexes as the initiators. ε‐Caprolactone and δ‐valerolactone polymerized efficiently at room temperature to afford polyesters, whereas β‐butyrolactone only gave the corresponding oligomer. The copolymerization reactions of DL‐lactide with caprolactone and valerolactone yielded gradient block copolymers where the lactyl blocks formed crystalline stereoblocks as a consequence of the stereoselective polymerization of DL‐lactide in the presence of the aluminum complexes. These polymerization processes were highly controlled in nature, and block copolymerization where caprolactone copolymerized using poly(DL‐lactide)‐Al complex proceeded. The obtained gradient copolymer containing stereoblock lactyl blocks and caproyl blocks were analyzed using WAXD analysis to uncover existence of the crystalline stereoblock lactyl blocks in the copolymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2536–2544     

Pyrolysis of polyphenylenes with PCL or/and PSt side chains

Thermal degradation characteristic of polyphenylenes is an important issue for developing a rational technology of polymer processing and applications. In this study, we discussed thermal degradation of polyphenylenes (PP) with poly(-caprolactone) (PCL) and/or PCL/polystyrene copolymers (PSt) prepared by combined controlled polymerization and cross-coupling processes via direct pyrolysis mass spectrometry. When PP-graft-PCL/PSt copolymers were considered, thermally less stabile PCL side chains decomposed in the first step. In the second stage of pyrolysis, the decomposition of the polystyrene chains has taken place. A slight increase in thermal stability of PCL chains for PP-graft-PCL/PSt copolymers was noted compared to copolymer PP-graft-PCL due to the interaction between PSt and PCL chains. This interaction was stronger when PSt chains were linked to the 2-position of the 1,4-phenylene ring.     

Preparation and self-assembly of pH-sensitive amphiphilic comb-shaped copolymer containing long fluorinated side chains

Novel pH-sensitive amphiphilic comb-shaped copolymers containing long fluorinated side chains, which combined the characteristics of pH-sensitivity from pendent tertiary amine groups, unique hydrophobic and fluorophobic characteristic from the fluorinated moieties and hydrophilicity from the poly (ethylene glycol) segments, were designed and synthesized via radical polymerizaion of 2-(Dimethylamino) ethyl methacrylate (DMAEMA), poly (ethylene glycol) methyl ether methacrylate (PEGMA) and homemade fluorinated macromonomer (PHFBMA-GMA). The physicochemical properties of polymeric micelles prepared therefrom were investigated. The chemical structures of the copolymers were characterized by GPC, FTIR and ¹H-NMR. The critical micelle concentrations (CMC) of the copolymers in different pH (5.0 and 7.4) were determined by fluorescence spectroscopy. Larger CMCs could be obtained in lower pH since the pronation of DMAEMA moieties enhanced the hydrophilicity. With increasing the amount, as well as the molecular weight, of PHFBMA-GMA, CMC decreased significantly. As pH decreased, particle size, as well as zeta potential of the polymeric micelles increased significantly, indicating significant pH-sensitivity of the polymeric micelles. Furthermore, larger polymeric micelles were obtained with larger amount, as well as higher molecular weight, of PHFBMA-GMA. Transmission electron microscopy (TEM) showed that the morphological shapes of the copolymers performed spherical micelles. The cytotoxicity test showed that the comb-shaped copolymers performed extremely low cytotoxicity. The pH-sensitive polymeric micelles prepared from the amphiphilic comb-shaped copolymers containing long fluorinated side chains could be potential candidates for nanotanks for hydrophobic or fluorophobic molecules and drug carriers and the facile preparation might fit for large scale industrialization.     

Polyaniline copolymers with solvent‐mimic side chains

We investigated new polyaniline copolymers with solvent‐mimic side chains for enhanced processability in various solvents. The solvent‐mimic side chains, benzyloxypropoxy (BOP), phenoxybutoxy (POB), and dihydroxypropoxy (DHP), were introduced into copolymers and used with nonpolar aromatic and polar alcoholic solvents, respectively. Compared to a polyaniline homopolymer, polyaniline copolymers with a small amount of side chains (<4 mol %) exhibit different physical properties, including film‐forming ability. This can be attributed to the solvent‐mimic side chains strongly interacting with the solvent and/or the polyaniline backbone. Especially, in nonpolar aromatic solvents, polyaniline copolymers with nonpolar aromatic BOP and POB side chains exhibit good film‐forming ability leading to high electrical conductivity, while the polyaniline homopolymer did not form a film. Therefore, introducing solvent‐mimic side chains in conducting polymers is a very attractive method of enhancing their processability and physical properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1986–1995     

Synthesis of PP graft copolymers via anionic living graft-from reactions of polypropylene containing reactive p-methylstyrene units

In this article, we discuss a new chemical route for preparing polypropylene (PP) graft copolymers containing a PP backbone and several (polar and nonpolar) polymer side chains, including polybutadiene, polystyrene, poly(p-methylstyrene), poly(methyl methacrylate), and polyacrylonitrile. The new PP graft copolymers had a controlled molecular structure and a known PP molecular weight, graft density, graft length, and narrow molecular weight distribution of the side chains. The chemistry involves an intermediate poly(propylene-co-p-methylstyrene) copolymer containing few p-methylstyrene (p-MS) units. The methyl group in a p-MS unit could be lithiated selectively by alkylithium to form a stable benzylic anion. Because of the insolubility of the PP copolymer at room temperature, the excess alkylithium could be removed completely from the lithiated polymer. By the addition of the anionically polymerizable monomers, including polar and nonpolar monomers, the stable benzylic anions in PP initiated a living anionic graft-from polymerization at ambient temperature to produce PP graft copolymers without any significant side reactions. The side-chain length was basically proportional to the reaction time and monomer concentration. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4176–4183, 1999     

Novel Dual-Grafted Copolymer Bearing Glassy Polystyrene and Crystalline Poly(Ethylene Oxide) as Side Chains

A novel grafted copolymer with two different types of side chains was synthesized via a combination of grafting-onto and grafting-from strategy. Graft copolymer with one side chains polybutadiene-graft-polystyrene (PB-g-PS) was first synthesized though the grafting-onto method. Following the subsequent grafting-from method, the second kind of side chain was introduced to the copolymer with anionic ring open polymerization of ethylene oxide, obtaining dual-grafted copolymer polybutadiene-graft-(polystyrene; poly(ethylene oxide)) (PB-g-(PS;PEO)). By this combined strategy, linear and star-shaped dual-grafted copolymer were synthesized. The resulting dual-grafted copolymers had controlled molecular weights and narrow molecular weight distributions (Mw/Mn < 1.20). The thermal behavior of this dual-grafted copolymer bearing glassy and crystalline side chains was determined by differential scanning calorimetry (DSC), revealing that poly(ethylene oxide) grafts underwent confined crystallization, and the star-shaped copolymer had more confinement effects than did the linear ones.     

Newly designed hydrogel with both sensitive thermoresponse and biodegradability

The synthesis and characterization of thermoresponsive hydrogels on the basis of N‐isopropylacrylamide (IPAAm) copolymers crosslinked with biodegradable poly(amino acids) are described. This hydrogel was prepared with two kinds of reactive IPAAm‐based copolymers containing poly(amino acids) as the side‐chain groups and activated ester groups. We introduced the graft chains by decarboxylation polymerization of amino acid N‐carboxyanhydrides initiated from lateral amino groups in the PIPAAm copolymer. The hydrogels easily crosslinked with degradable poly(amino acid) chains by only mixing the copolymer aqueous solutions. The gelling method in this study would provide some of the following innovative features: (1) no necessary removal of unreacted monomers and so forth, (2) simpler loading of drugs into the hydrogels (only mixing when gelling), and (3) easier insertion into the body. On the basis of the swelling ratio measurement of the hydrogel, large volume changes dependent on temperature changes were observed. Moreover, the enzymatic temperature‐dependent degradation was confirmed. The results suggested that these hydrogels could be used for an injectable or implantable matrix of temperature‐modulated drug release. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 779–787, 2003     

Synthesis and characterization of novel brush copolymers with biodegradable polyphosphoester side chains for gene delivery

A novel kind of pH‐sensitive brush copolymer [poly(2‐hydroxyethyl methacrylate)‐graft‐poly(ethylethylene phosphate)]‐block‐poly[2‐(dimethylamino)ethyl methacrylate] [(PHEMA‐g‐PEEP)‐b‐PDMAEMA] with biodegradable polyphosphoester as the side chains, and its self‐assembled aggregates were developed for nonviral gene delivery. The brush copolymers were synthesized via a combination of single‐electron transfer living radical polymerization and ring‐opening polymerization. The chemical structures of these brush copolymers were characterized by FTIR, ¹H NMR, and ³¹P NMR measurements. The critical aggregation concentration values of (PHEMA‐g‐PEEP)‐b‐PDMAEMA in pH 7.4 buffer solution were determined by the fluorescence probe technique. The interaction of (PHEMA‐g‐PEEP)‐b‐PDMAEMA and DNA was studied by agarose gel retardation assay, and the formed complexes were further investigated by means of zeta potential, dynamic light scattering, and transmission electron microscopy measurements. In addition, the in vitro cytotoxicity and transfection tests indicated that these brush copolymers showed low toxicity and favorable transfection efficiency to HeLa cells. All these results demonstrated that these biocompatible brush copolymers may be a promising candidate as nonviral polymeric gene vector. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Photoinduced conformational changes of azoaromatic polyaspartates containing octadecyl side chains

Copolymers of p-(phenylazo)benzyl-L-aspartate and n-octadecyl-L-aspartate exist as right- and left-handed α-helices in solution at 25°C depending on the copolymer composition: the reversal of helix sense from a right- to left-handed one occurs with increasing the azobenzene content. The α-helices of the copolymers are very sensitive to trifluoroacetic acid (TFA), and are converted into random coil below 2.0% of TFA. Among the copolymers, the copolymer containing 47% azobenzene groups is unique since it exhibits a TFA-induced conformational change from right-handed α-helix to random coil via left-handed α-helix. Upon UV light irradiation at 25°C, the copolymers containing 68 and 89% azobenzene groups caused the reversal in helix sense from a left- to right-handed one. The conformations of the copolymers were dependent on temperature, mostly right-handed and left-handed α-helices at lower and higher temperatures, respectively. On this basis, the copolymer containing 47% azobenzene groups could be made to undergo a photoinduced helix reversal at high temperatures.     

Molecular orientation of aromatic polycarbonates containing fluorene side chains by polarized infrared spectroscopy and birefringence analysis

The molecular orientation of an aromatic polycarbonate containing fluorene side chains was investigated by polarized infrared spectroscopy and birefringence analyses. The copolymers were synthesized from 2,2‐bis(4‐hydroxyphenyl)propane (BPA), 9,9‐bis(4‐hydroxy‐3‐methylpheny)fluorene (BMPF), and phosgene by interfacial polycondensation. The 1449‐cm^?1 band of the uniaxially oriented films, stretched at the glass‐transition temperature (T_g) plus 5 °C, was assigned to various combinations of CC stretching and CH in‐plane bending vibrations in the fluorene ring, and the transition moment angle was estimated to be 90°. The intrinsic birefringence of aromatic polycarbonate films with BMPF molar ratios ranging from 0.5 to 1 was obtained with the 1449‐cm^?1 band. The copolymer was estimated to show zero intrinsic birefringence at the BMPF molar ratio of 0.75, and the BMPF homopolymer showed negative intrinsic birefringence. A linear relationship between the volume fraction of BMPF units and the intrinsic birefringence indicated that the two monomer units of BPA and BMPF in each copolymer were not independent, and an intrinsic birefringence could be defined even in the copolymer. The sign of the photoelastic coefficient in the homopolymer with BMPF units was positive. The different signs of the photoelastic coefficient and the intrinsic birefringence suggest that the fluorene side‐chain orientation induced by stress in the glass state is quite different from the orientation of the uniaxially oriented films stretched at T_g + 5 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1554–1562, 2003     

A pH- and temperature-sensitive macrocyclic graft copolymer composed of PEO ring and multi-poly(2-(dimethylamino) ethyl methacrylate) lateral chains

A novel method for the synthesis of macrocyclic graft copolymers was developed through combination of anionic ring-opening polymerization (AROP) and atom transfer radical polymerization (ATRP). A linear α,ω-dihydroxyl poly(ethylene oxide) with pendant acetal protected hydroxyl groups (l-poly(EO-co-EEGE)) was prepared first by the anionic copolymerization of ethylene oxide (EO) and ethoxyethyl glycidyl ether (EEGE). Then l-poly(EO-co-EEGE) was cyclized. The crude cyclized product containing the linear byproduct was hydrolyzed and purified by being treated with α-CD. The pure cyclic copolymer [c-poly(EO-co-Gly)] was esterified by reaction with 2-bromoisobutyryl bromide, and then used as ATRP macroinitiators to initiate polymerization of 2-(dimethylamino) ethyl methacrylate (DMAEMA), and a series of pH- and temperature-sensitive macrocyclic graft copolymers composed of a hydrophilic PEO as the ring and PDMAEMA as side chains (c-PEO-g-PDMAEMA) were obtained. The behavior of pH- and temperature-sensitive macrocyclic copolymers was studied in aqueous solution by fluorescence and dynamic light scattering (DLS). The critical micellization pH values of macrocyclic graft copolymers and their corresponding linear graft copolymers (l-PEO-g-PDMAEMA) were measured. Under the same conditions, the cyclic graft copolymer with the shorter side chains gave the higher critical micellization pH value. The c-PEO-g-PDMAEMA showed the lower critical micellization pH value than the corresponding l-PEO-g-PDMAEMA. The average hydrodynamic diameters (D _h) of the micelles were measured by DLS with the variation of the aqueous solution pH value and temperature.     

Thermoresponsive brush copolymers with poly(propylene oxide‐ran‐ethylene oxide) side chains via metal‐free anionic polymerization “grafting from” technique

Thermoresponsive brush copolymers with poly(propylene oxide‐ran‐ethylene oxide) side chains were synthesized via a “grafting from” technique. Poly(p‐hydroxystyrene) was used as the backbone, and the brush copolymers were prepared by random copolymerization of mixtures of oxyalkylene monomers, using metal‐free anionic ring‐opening polymerization, with the phosphazene base (t‐BuP₄) being the polymerization promoter. By controlling the monomer feed ratios in the graft copolymerization, two samples with the same side‐chain length and different compositions were prepared, both of which possessed high molecular weights and low molecular weight distributions. The results from light scattering and fluorescence spectroscopy indicated that the brush copolymers in their dilute aqueous solutions were near completely solvated at low temperature and underwent slight intramolecular chain contraction/association and much more profound intermolecular aggregation at different stages of the step‐by‐step heating process. Above 50 °C, very turbid solutions, followed by macrophase separation, were observed for both of the samples, which implied that it was difficult for the brush copolymers to form stable nanoscopic aggregates at high temperature. All these observations were attributed, at least partly, to the distribution of the oxyalkylene monomers along the side chains and the overall brush‐like molecular architecture. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2320–2328, 2010     

Structure of crystalline polymers with unbranched long side chains

The structure and thermodynamic properties of atactic and isotactic acrylic and methacrylic polymers containing 16–18 carbon atoms in the n-aliphatic side chains, and of copolymers of hexadecyl acrylate with isopropyl acrylate were studied by means of x-ray and differential thermal analysis. The crystallization of branched acrylic and methacrylic polymers and of acrylic copolymers proceeds in the form of a hexagonal crystal, regardless of the configuration of the backbone chain. Methods of ordering branched macromolecules are proposed, and the melting points, heats and entropies of fusion determined. The role of flexibility of the backbone chains in ordering and the crystallization processes was determined. In the case of poly(n-alkyl acrylates) the backbone chain is involved in the crystalline lattice; this is not the case in methacrylates and copolymers of hexadecyl acrylate with isopropyl acrylate. Some similarity was assumed between the structure of biopolymers and synthetic branched polymers.     

Compatibilizing effect of a graft copolymer on bacterial poly(3‐hydroxybutyrate)/poly(methyl methacrylate) blends

Blends of isotactic (natural) poly(3‐hydroxybutyrate) (PHB) and poly(methyl methacrylate) (PMMA) are partially miscible, and PHB in excess of 20 wt % segregates as a partially crystalline pure phase. Copolymers containing atactic PHB chains grafted onto a PMMA backbone are used to compatibilize phase‐separated PHB/PMMA blends. Two poly(methyl methacrylate‐g‐hydroxybutyrate) [P(MMA‐g‐HB)] copolymers with different grafting densities and the same length of the grafted chain have been investigated. The copolymer with higher grafting density, containing 67 mol % hydroxybutyrate units, has a beneficial effect on the mechanical properties of PHB/PMMA blends with 30–50% PHB content, which show a remarkable increase in ductility. The main effect of copolymer addition is the inhibition of PHB crystallization. No compatibilizing effect on PHB/PMMA blends with PHB contents higher than 50% is observed with various amounts of P(MMA‐g‐HB) copolymer. In these blends, the graft copolymer is not able to prevent PHB crystallization, and the ternary PHB/PMMA/P(MMA‐g‐HB) blends remain crystalline and brittle. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1390–1399, 2002