endo-双环戊二烯阳离子聚合及聚合物链结构

使用不同阳离子引发剂和引发体系在甲苯、正己烷和二氯甲烷中引发endo-双环戊二烯(DCPD)聚合, 得到了低分子量的DCPD聚合物(PDCPD), 采用IR和1H NMR对PDCPD链结构进行了表征。结果表明, DCPD分子的降冰片烯(NB)双键和环戊烯(CP)双键均参与了聚合反应并根据不同链增长机理产生四种链结构单元: 通过NB双键的链增长反应可生成直接加成结构单元I和重排结构单元II, 通过CP双键的链增长反应生成直接加成结构单元III和跨环重排单元IV。正己烷和甲苯中所合成了PDCPD包含全部四种结构单元, 并呈现I相似文献   

Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Comprehensive structural characterization of polyisoprene synthesized via cationic mechanism

The microstructure of polyisoprene synthesized with ^tBuCl/TiCl₄ initiating system is investigated using 1D and 2D (HSQC and HMBC) NMR spectroscopy. It is found that trans‐1,4‐units with regular (head‐to‐tail) and inverse (tail‐to‐tail) and (head‐to‐head) enchainments are predominant structures of unsaturated part of polymer chain, while 1,2‐ and 3,4‐units are presented in minor amounts. The new methodology for the quantitative calculation of the content of different structural units in polyisoprene chain including both types of inverse trans‐1,4‐addition (tail‐to‐tail and head‐to‐head) is proposed. It is shown that head groups consist of tert‐butyl group connected to trans‐1,4‐unit of polyisoprene chain. In addition, two types of chlorine‐containing end groups are found (trans‐4,1‐Cl and 4,3‐Cl), while conjugated double bonds at the chain end are totally absent. The methodology for the calculation of number‐average functionality by tert‐butyl head and chlorine end groups, respectively, is developed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2430–2442     

Polymerization of allyl esters of unsaturated acids. V. Cyclopolymerization of methyl allyl fumarate

The kinetics of radical polymerization of methyl allyl fumarate (MAF) is discussed in terms of cyclopolymerization and compared with the polymerization results of methyl allyl maleate (MAM) as a cis isomer. In the polymerization of MAF, the rate and degree of polymerization were quite enhanced compared with MAM, and gelation occurred at low conversion. The content of the unreacted allylic double bonds of the MAF polymer was quite large; whereas those of the unreacted fumaric double bonds and the cyclic structural units showed reverse tendencies. Only a slight presence of a five-membered ring was observed in the MAF polymer. The cyclization constants K_A and K_V, the ratios of the rate constants of the unimolecular cyclization reaction to those of the bimolecular propagation reaction of the uncyclized allylic and fumaric radicals, were estimated to be 2.73 and 1.48 mole/liter, respectively. These values suggest the great difference in the cyclopolymerization behavior between two isomeric monomers. These results are discussed in detail in connection with the high reactivity of the fumaric double bond compared to the maleic double bond. In addition, the formation mode and the sequence distribution of the structural units of the polymer produced are discussed on the basis of these analytical results. Thus, for the MAF polymer obtained in the bulk polymerization, about 60% of the cyclic structure can be formed via the intramolecular attack of the uncyclized fumaric radical on the allylic double bond, as opposed to the case of MAM via the predominant intramolecular attack (ca. 90%) of the uncyclized allylic radical on the maleic double bond; these results and the low probability for the succession of cyclic structures and the rather high probability of a vinyl-to-vinyl addition are presented.     

Reactivity of monoenic and conjugated diene systems present in unsaturated olefin terpolymers—I. Reactions with t-butoxy radicals (CH3)3 CO•

The relative rate constants for the hydrogen abstraction and the double bond addition reactions of t-butoxy radicals (CH₃)₃ CO^? with the model compounds 5-ethylidennorbornane (I), dihydrodicyclopentene (II), isopropylidendicyclopentene (III) and methylcyclopentadienylnorbornylmethane (IV) have been determined by using as a reference reaction the hydrogen abstraction for iso-octane. With (I), (III) and (IV) the predominant process is the hydrogen abstraction, whilst for (II) both mechanisms are important. The results have been applied for the elucidation of some aspects of the initiating mechanism of peroxide-induced cross-linking of EPDM and EPTM terpolymers containing (I)-(IV) pendants.     

Structural characterization of polybutadiene synthesized via cationic mechanism

The microstructure of polybutadiene synthesized via cationic polymerization using TiCl₄‐based initiating systems has been investigated using 1D (¹Н, ²Н, and ¹³С) and 2D (HSQC and HMBC) NMR spectroscopy. It was found that trans‐1,4‐unit is predominant structure of unsaturated part of polymer chain. Besides, the small amount of 1,2‐structures was also detected, while cis‐1,4‐units were totally absent. The signals of carbon atoms of three types of head groups (trans‐1,4‐, 1,2‐, and tert‐butyl) and two types of end groups (trans‐1,4‐Cl and 1,2‐Cl) were identified for the first time in macromolecules of cationic polybutadiene. It was showed that tert‐butyl head groups were formed due to the presence in monomer of admixtures of isobutylene. The new methodology for calculation of the content of different structural units in polybutadiene chain as well as the head and end groups was proposed. It was established that main part of 1,2‐units distributed randomly along the polybutadiene chain as separate units between trans‐1,4‐structures. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 387–398     

Two isomers of Pd2(S2NC7H4)4

The dichloromethane solvates of the isomers tetrakis(μ‐1,3‐benzothiazole‐2‐thiolato)‐κ⁴N:S;κ⁴S:N‐dipalladium(II)(Pd—Pd), (I), and tetrakis(μ‐1,3‐benzothiazole‐2‐thiolato)‐κ⁶N:S;κ²S:N‐dipalladium(II)(Pd—Pd), (II), both [Pd₂(C₇H₄NS₂)₄]·CH₂Cl₂, have been synthesized in the presence of (o‐isopropylphenyl)diphenylphosphane and (o‐methylphenyl)diphenylphosphane. Both isomers form a lantern‐type structure, where isomer (I) displays a regular and symmetric coordination and isomer (II) an asymmetric and distorted structure. In (I), sitting on an centre of inversion, two 1,3‐benzothiazole‐2‐thiolate units are bonded by a Pd—N bond to one Pd atom and by a Pd—S bond to the other Pd atom, and the other two benzothiazolethiolate units are bonded to the same Pd atoms by, respectively, a Pd—S and a Pd—N bond. In (II), three benzothiazolethiolate units are bonded by a Pd—N bond to one Pd atom and by a Pd—S bond to the other Pd atom, and the fourth benzothiazolethiolate unit is bonded to the same Pd atoms by, respectively, a Pd—S bond and a Pd—N bond.     

Polymorphic forms of nylon 3

The crystal structure of nylon 3 was studied, and four crystalline modifications were observed. Modification I, as determined from the x-ray diffraction pattern of drawn fibers, is similar to the α crystal structure of nylon 6. The unit cell is monoclinic; a = 9.33 Å, b = 4.78 Å, (fiber identity period), c = 8.73 Å, and β = 60°. The theoretical density for nylon 3 with four monomeric units in the unit cell is 1.39 g/cm³, and the observed density is 1.33 g/cm³. The space group is P2₁. The nylon 3 chains are in the extended planar zigzag conformation. Although other odd-numbered nylon form triclinic or pseudohexagonal crystals when oriented, drawn nylon 3 crystals are monoclinic. In addition to modification I, modifications II, III, and IV were studied. Lattice spacings of modifications II and III are equal to those of modification I. However x-ray diffraction intensities are different. Infrared spectra of those forms indicate an extended planar zigzag conformation of the chains. Modification IV is thought to correspond to the so-called smectic hexagonal form. No γ crystals were found, and it appears that polyamide chains with short sequences of methylene groups cannot form crystals of this type.     

Composition of vinylidene chloride/phenylacetylene (VDC/PA) copolymers and vinylidene chloride/methyl acrylate/phenylacetylene (VDC/MA/PA) terpolymers from analysis by 13C-NMR spectroscopy

¹³C-NMR spectroscopy has been utilized to characterize Saran polymers containing polyene segments generated by incorporating phenylacetylene (PA) units into either poly(vinylidene chloride) (PVDC) or a typical Saran copolymer of 91% vinylidene chloride (VDC) and 9% methyl acrylate (MA). The incorporation of PA could not be defined in the usual statistical way because the presence of the PA double bond in the polymer backbone appeared to cause the dehydrohalogenation of units next to it. Thus, sequences of PA next to VDC were not observed. Rather, sequences of olefinic units next to VDC units were present at a level equal to the level of PA incorporation. The level of unsaturation in the PA copolymers is approximately four times the level of PA incorporation. These observations are consistent with the random incorporation into the copolymer of PA which then initiates the dehydrohalogenation in adjacent VDC units. This dehydrohalogenation reaction appears to propagate from one unit to the next along the backbone of the polymer such that polyene segments containing the PA unit are formed.     

A novel one‐dimensional double‐chain‐like ZnII coordination polymer: poly[bis(1‐benzyl‐1H‐imidazole‐κN3)tris(μ‐cyanido‐κ2C:N)(cyanido‐κC)disilver(I)zinc(II)]

One of most interesting systems of coordination polymers constructed from the first‐row transition metals is the porous Zn^II coordination polymer system, but the numbers of such polymers containing N‐donor linkers are still limited. The title double‐chain‐like Zn^II coordination polymer, [Ag₂Zn(CN)₄(C₁₀H₁₀N₂)₂]_n, presents a one‐dimensional linear coordination polymer structure in which Zn^II ions are linked by bridging anionic dicyanidoargentate(I) units along the crystallographic b axis and each Zn^II ion is additionally coordinated by a terminal dicyanidoargentate(I) unit and two terminal 1‐benzyl‐1H‐imidazole (BZI) ligands, giving a five‐coordinated Zn^II ion. Interestingly, there are strong intermolecular Ag^I…Ag^I interactions between terminal and bridging dicyanidoargentate(I) units and C—H…π interactions between the phenyl rings of BZI ligands of adjacent one‐dimensional linear chains, providing a one‐dimensional linear double‐chain‐like structure. The supramolecular three‐dimensional framework is stabilized by C—H…π interactions between the phenyl rings of BZI ligands and by Ag^I…Ag^I interactions between adjacent double chains. The photoluminescence properties have been studied.     

Unusual 4‐arsonoanilinium cationic species in the hydrochloride salt of (4‐aminophenyl)arsonic acid and formed in the reaction of the acid with copper(II) sulfate,copper(II) chloride and cadmium chloride

Structures having the unusual protonated 4‐arsonoanilinium species, namely in the hydrochloride salt, C₆H₉AsNO₃⁺·Cl⁻, (I), and the complex salts formed from the reaction of (4‐aminophenyl)arsonic acid (p‐arsanilic acid) with copper(II) sulfate, i.e. hexaaquacopper(II) bis(4‐arsonoanilinium) disulfate dihydrate, (C₆H₉AsNO₃)₂[Cu(H₂O)₆](SO₄)₂·2H₂O, (II), with copper(II) chloride, i.e. poly[bis(4‐arsonoanilinium) [tetra‐μ‐chlorido‐cuprate(II)]], {(C₆H₉AsNO₃)₂[CuCl₄]}_n , (III), and with cadmium chloride, i.e. poly[bis(4‐arsonoanilinium) [tetra‐μ‐chlorido‐cadmate(II)]], {(C₆H₉AsNO₃)₂[CdCl₄]}_n , (IV), have been determined. In (II), the two 4‐arsonoanilinium cations are accompanied by [Cu(H₂O)₆]²⁺ cations with sulfate anions. In the isotypic complex salts (III) and (IV), they act as counter‐cations to the {[CuCl₄]²⁻}_n or {[CdCl₄]²⁻}_n anionic polymer sheets, respectively. In (II), the [Cu(H₂O)₆]²⁺ ion sits on a crystallographic centre of symmetry and displays a slightly distorted octahedral coordination geometry. The asymmetric unit for (II) contains, in addition to half the [Cu(H₂O)₆]²⁺ ion, one 4‐arsonoanilinium cation, a sulfate dianion and a solvent water molecule. Extensive O—H…O and N—H…O hydrogen bonds link all the species, giving an overall three‐dimensional structure. In (III), four of the chloride ligands are related by inversion [Cu—Cl = 2.2826 (8) and 2.2990 (9) Å], with the other two sites of the tetragonally distorted octahedral CuCl₆ unit occupied by symmetry‐generated Cl‐atom donors [Cu—Cl = 2.9833 (9) Å], forming a two‐dimensional coordination polymer network substructure lying parallel to (001). In the crystal, the polymer layers are linked across [001] by a number of bridging hydrogen bonds involving N—H…Cl interactions from head‐to‐head‐linked As—O—H…O 4‐arsonoanilinium cations. A three‐dimensional network structure is formed. Cd^II compound (IV) is isotypic with Cu^II complex (III), but with the central CdCl₆ complex repeat unit having a more regular M —Cl bond‐length range [2.5232 (12)–2.6931 (10) Å] compared to that in (III). This series of compounds represents the first reported crystal structures having the protonated 4‐arsonoanilinium species.     

A Significant Two-Dimensional Structural Transformation in a Coordination Polymer that Changes Its Electronic and Protonic Behavior

A 2D-to-2D (2D: two-dimensional) structural transformation accompanying significant bond rearrangement and coordination environment change is demonstrated in a coordination polymer (CP) comprised of copper(II) ions and terephthalate (BDC²⁻) ligands for the first time. When immersed in water, a free-standing membrane of 2D Cu(BDC)(DMF) ( Cu-1 ; DMF: N,N-dimethylformamide) transforms into 2D Cu(BDC)(H₂O)₂ ( Cu-2 ) while maintaining its highly oriented layered structure. In the 2D sheet, paddlewheel-type Cu^II dimers coordinated with four bidentate BDC ligands in a square-planar array in Cu-1 were released to form uniform aqua-bridged Cu^II chains, which are cross-linked with each other by unidentate BDC ligands, in Cu-2 . The present facile approach to implement the 2D-to-2D transformation accompanied by bond rearrangement, which is characteristic of CPs, leads to a marked increase in in-plane magnetic susceptibility and proton conductivity. In situ experiments in support of theoretical calculations unveiled the energy diagram that governs the unique structural transformation.     

A Disulfide Switch Providing Absolute Handedness Control in Double Helices via Conversion from the Antiparallel to Parallel Helical Pattern

A strategy to reversibly switch the parallel/antiparallel helical conformation of aromatic double helices through the formation/breakage of a disulfide bond is presented. Single-crystal X-ray structures, NMR, and circular dichroism spectroscopy demonstrate that the double helices with terminal thiol groups favor an antiparallel helical arrangement both in the solid state and in solution, while the P/M bias of helicity induced by chiral segments from another extremity of the sequence is weak in this structural motif. The antiparallel helices can be rearranged to parallel helices through the disulfide connection of the sequences. This change enhances the bias of helical handedness and results in absolute chirality control of the double helices. The handedness-mediated process can be governed by the oxidation-reduction cycle, thereby switching the structural arrangement and the enhancement of chiral bias. In addition, we find that the sequences can dimerize into an intermolecular double helix with the disulfide connection. And the helical handedness is also fully controlled due to the head-to-head structural motif.     

Polymerization of <Emphasis Type="Italic">p</Emphasis>-dioxanone initiated by compounds of tin and transition metals

The bulk polymerization of p-dioxanone is studied at 80 and 120°С. A high-molecular-mass poly(p-dioxanone) suitable for extrusion processing into medical devices is prepared with the use of initiating systems based on Sn(II), Sn(IV), Y(III), Zr(IV), and Hf(IV) compounds and dodecanol and oxiranes with different structures as polymerization coinitiators. For a number of polymer samples, molecular masses are determined via viscometry. New initiating systems that enable the synthesis of poly(p-dioxanone) with a logarithmic viscosity of 1.95–2.54 dL/g and a molecular mass of up to 400 kDa are proposed.     

EPR and IR spectral investigations on some leafy vegetables of Indian origin

EPR spectral investigations have been carried out on four edible leafy vegetables of India, which are used as dietary component in day to day life. In Rumex vesicarius leaf sample, EPR spectral investigations at different temperatures indicate the presence of anti-ferromagnetically coupled Mn(IV)–Mn(IV) complexes. EPR spectra of Trigonella foenum graecum show the presence of Mn ions in multivalent state and Fe³⁺ ions in rhombic symmetry. EPR spectra of Basella rubra indicate the presence of Mn(IV)–O–Mn(IV) type complexes. The EPR spectra of Basella rubra have been studied at different temperatures. It is found that the spin population for the resonance signal at g = 2.06 obeys the Boltzmann distribution law. The EPR spectra of Moringa oliefera leaves show the presence of Mn²⁺ ions. Radiation induced changes in free radical of this sample have also been studied. The FT-IR spectra of Basella rubra and Moringa oliefera leaves show the evidences for the protein matrix bands and those corresponding to carboxylic CO bonds.     

Excited‐State Hydrogen Bonding Strengthening and Weakening with Intramolecular Charge Transfer in Resorufin‐Water Complexes: A TD‐DFT Study

The geometric structures, infrared spectra and hydrogen bond binding energies of the various hydrogen‐bonded Res^?‐water complexes in states S0 and S1 have been calculated using the density functional theory (DFT) and time‐dependent density functional theory (TD‐DFT) methods, respectively. Based on the changes of the hydrogen bond lengths and binding energies as well as the spectral shifts of the vibrational mode of the hydroxyl groups, it is demonstrated that hydrogen bonds HB‐II, HB‐III and HB‐IV are strengthened while hydrogen bond HB‐I is weakened in the four singly hydrogen‐bonded Res^?‐Water complexes upon photoexcitation. When the four hydrogen bonds are formed simultaneously between one resorufin anion and four water molecules in the Res^?‐4Water complex, all the hydrogen bonds are weakened in both the ground and excited states compared with those in the corresponding singly hydrogen‐bonded Res^?‐Water complexes. Furthermore, in complex Res^?‐4Water, hydrogen bonds HB‐II and HB‐IV are strengthened while hydrogen bonds HB‐I and HB‐III are weakened after the electronic excitation. The hydrogen bond strengthening and weakening in the various hydrogen‐bonded Res^?‐water complexes should be due to the redistribution of the charges among the four heteroatoms (O_1‐3 and N₁) within the resorufin molecule upon the optical excitation.     

Hydroxamic acid polymers

A polymer bearing hydroxamic acid groups and having a high affinity for iron(III) was prepared through the following procedure. Acryloylalanine (III), prepared by the reaction of acryloyl chloride with alanine, was treated with N-hydroxysuccinimide in the presence of dicyclohexylcarbodiimide to give the N-hydroxysuccinimide ester (IV). The ester IV was polymerized by using AIBN in dioxane to give polymer V. Treatment of polymer V with methylhydroxylamine in DMF gave the hydroxamic acid polymer II. The water-soluble polymer II was purified by dialysis or by gel-permeation chromatography (GPC) on Sephadex G-25. Analytical GPC on Sephadex G-200 and Sepharose 4B indicate that the average molecular weight of the polymer is in the range of 5 × 10⁵ to 1 × 10⁶. The presence of hydroxamic acid groups is confirmed by the intense red-brown color produced by the addition of iron(III) to a 50% aqueous DMF solution of the polymer under acidic conditions. In pure water the polymer-iron complex precipitates as a tan solid. Iron-binding studies of the polymer reveal that the iron(III) trihydroxamic acid complex FeA₃ forms at low concentrations of iron. At higher iron levels a lower order of stability is apparent, which can be accounted for by the conversion of FeA₃ to FeA₂⁺. In contrast, the FeA₃ complex of the trihydroxamic acid deferoxamine-B is stable at all iron levels. These results are consistent with the polymer structure, which for steric reasons would favor a stable complex, FeA₂⁺, between iron and two adjacent hydroxamic acid groups. An FeA₃ complex would be expected to have a lower stability as a result of either bond angle strain and atomic compression, or a lower probability in bringing a third hydroxamic acid into position to form the octahedral complex.     

Stable Four‐Coordinate Guanidinatosilicon(IV) Complexes with SiN3El Skeletons (El=S,Se, Te) and SiEl Double Bonds

To get information about the reactivity profile of the donor‐stabilized guanidinatosilicon(II) complexes 2 and 3 , a series of oxidative addition reactions was studied. Treatment of 2 and 3 with S₈, Se, or Te afforded the respective four‐coordinate silicon(IV ) complexes 8 – 10 and 12 – 14 , which contain an SiN₃El skeleton (El=S, Se, Te) with an Si?El double bond. Treatment of 2 with N₂O yielded the dinuclear four‐coordinate silicon(IV) complex 11 with an SiN₃O skeleton and a central four‐membered Si₂O₂ ring. Compounds 8 – 14 exist both in the solid state and in solution. They were characterized by elemental analyses, NMR spectroscopic studies in the solid state and in solution, and crystal structure analyses. The reactivity profile of 2 was compared with that of the structurally related bis[N,N′‐diisopropylbenzamidinato(?)]silicon(II) ( 1 ), which is three‐coordinate in the solid state and four‐coordinate in solution ( 1′ ). In contrast, as shown by state‐of‐the‐art relativistic DFT analyses and experimental studies, silylene 2 is three‐coordinate both in the solid state and solution. The three‐coordinate species 2 is 9.3 kcal mol^?1 more stable in benzene than the four‐coordinate isomer 2′ . The reason for this was studied by bonding analyses of 2 and 2′ , which were compared with those of 1 and 1′ . The gas‐phase proton affinities of the relevant species in solution ( 1 ′ and 2 ) amount to 288.8 and 273.8 kcal mol^?1, respectively.     

Multinuclear NMR studies on CF3 substituted sulfur,selenium and tellurium compounds

A systematic investigation of thirty-four CF₃Se(II, IV) and eight CF₃Te(II, IV) compounds by ¹³C, ¹⁹F, ⁷⁷Se and ¹²⁵Te NMR spectroscopy resulted in some general features for chemical shifts and coupling constants which agree with the trends of reported ¹⁹F and new ¹³C NMR data of CF₃S(II, IV) compounds. Moreover, the NMR spectra of molecules of the type E=CXY (E = chalcogen, X, Y = halogen) and substances containing a CSe double bond have been studied. From the comparison of these NMR data with those of CF₃ substituted chalcogen compounds, a partial double bond character of the carbon-fluorine and carbon-chalcogen bond in CF₃ substituted chalcogen compounds can be derived: