Dependence of mechanical properties on β‐form content and crystalline morphology for β‐nucleated isotactic polypropylene

As part of a continuous effort to develop high performance isotactic polypropylene (iPP) based on β‐form crystalline and morphological change induced by rare earth nucleator (WBG), various WBG contents (from 0.025 to 1.0 wt%) were adopted to prepare β‐nucleated iPP at a fixed final molten temperature (240°C) in this study. The crystallinity, polymorphic composition, and crystalline morphology were inspected in detail by a series of crystallographic characterizations, including calorimeter, X‐ray diffraction, polarized light microscopy (PLM), and electron microscopy. Furthermore, the self‐organization and re‐crystallization behavior of β‐nucleating agent occurred during cooling was characterized by rheometry. Finally, the dependence of mechanical properties, including tensile strength, elongation at break, and impact strength, on WBG content was discussed based on the variations in β‐form content and crystalline morphology. Interestingly, it is found that while the WBG content is below 0.1 wt%, the toughness of β‐nucleated iPP increases with increase in WBG content due to additional β‐form content; as the WBG content is in range of 0.1–0.5 wt%, the toughness increases at a lower rate with increase in WBG content due to β‐crystalline morphological change. However, a decrease in toughness is observed while nucleator content is above 0.5 wt% as WBG remains undissolved in iPP upon the adopted processing conditions. The result of this study provides valuable information for potential industrial applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Influence of oriented β‐lamellae on deformation and pore formation in β‐nucleated polypropylene

Four β‐nucleated polypropylene samples with increasing die draw ratio (DDR) were prepared to modify lamellae arrangement. The DSC, SEM, and 2D‐XRD results show that all four cast films had similar crystallinity, high contents of β‐crystal but lowering stability of β‐lamellae with ascending DDR. Meanwhile, the anisotropy of β‐lamellae distribution strengthens gently and the stacked lamellae structure perpendicular to the machine direction (MD) predominates dramatically. Tensile testing at 25 °C and 90 °C were conducted along MD and transverse direction (TD), respectively. The markedly expanding difference of deformation indicates the anisotropy highlighted significantly. Additionally, when the samples stretched along MD, a more homogeneous deformation occurs with ascending anisotropy, which is completely opposite to the β‐lamellae stability. But samples deformed more heterogeneous when stretched along TD. The characterization of morphological evolutions during stretching shows that the stacked lamellae debonds uniformly and abundant microvoids formed when the sample stretched along MD with higher anisotropy, resulting in evenly dispersion of stress, consequently making a more uniform distribution of defects and a better isotropic deformation. Moreover, the microfibrils and defects distributed uniformly within higher orientation sample after longitudinal stretching stretched along MD, leading to the dramatic improvement of pore size distribution of the membrane after biaxial stretching. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1745–1759     

Preparation,characterization and properties of β-chitin and N-acetylated β-chitin

Free amino groups in β-chitin from squid pen were acetylated to obtain N-acetylated β-chitin. After careful control of degree of acetylation, thermal and mechanical properties of β-chitin and N-acetylated β-chitin were compared. The structural differences of β-chitin and N-acetylated β-chitin were characterized by Fourier transform infrared (FTIR) and wide-angle x-ray diffraction (WAXD) analysis. The results indicated that the crystallinity of N-acetylated β-chitin was higher than that of β-chitin and N-acetylated β-chitin exhibited characteristics similar to α-chitin. Equilibrium water content (EWC) of β-chitin reached to about 50% and this hydrophilic nature was assumed to be caused by a relatively weak hydrogen bonding force of β-chitin with parallel main chains. On the other hand, EWC of N-acetylated β-chitin was 40% due to the introduction of ordered structure. β-chitin and N-acetylated β-chitin have the tensile strength of 0.4 and 0.7 Mpa in the swollen state, respectively. Viscoelastic properties and thermal relaxation behaviors were investigated by dynamic mechanical thermal analysis (DMTA). DMTA spectra of these samples showed that α-transition peaks of β-chitin and N-acetylated β-chitin were observed at 170 and 190°C, respectively. These relaxation peak maxima were assigned to be their glass transition temperature. In addition, a second relaxation peak of β-chitin resulting from acetamide groups was found at 112°C and a broad relaxation peak of N-acetylated β-chitin at around 81–100°C. As a result of thermogravimetric analysis, 10% weight loss temperatures of β-chitin and N-acetylated β-chitin were 270 and 285°C, respectively. © 1996 John Wiley & Sons, Inc.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

Enhanced β‐phase in PVDF polymer nanocomposite and its application for nanogenerator

Harvesting energy from the ambient mechanical energy by using flexible piezoelectric nanogenerator is a revolutionary step toward achieving reliable and green energy source. Polyvinylidene fluoride (PVDF), a flexible polymer, can be a potential candidate for the nanogenerator if its piezoelectric property can be enhanced. In the present work, we have shown that the polar crystalline β‐phase of PVDF, which is responsible for the piezoelectric property, can be enhanced from 48.2% to 76.1% just by adding ZnO nanorods into the PVDF matrix without any mechanical or electrical treatment. A systematic investigation of PVDF‐ZnO nanocomposite films by using X‐ray diffractometer, Fourier transform infrared spectroscopy, and polarization‐electric field loop measurements supports the enhancement of β‐phase in the flexible nanocomposite polymer films. The piezoelectric constant (d₃₃) of the PVDF‐ZnO (15 wt%) film is found to be maximum of approximately −1.17 pC/N. Nanogenerators have been fabricated by using these nanocomposite films, and the piezoresponse of PVDF is found to enhance after ZnO loading. A maximum open‐circuit voltage ~1.81 V and short‐circuit current of 0.57 μA are obtained for 15 wt% ZnO‐loaded PVDF nanocomposite film. The maximum instantaneous output power density is obtained as 0.21 μW/cm² with the load resistance of 7 MΩ, which makes it feasible for the use of energy harvesting that can be integrated to use for driving small‐scale electronic devices. This enhanced piezoresponse of the PVDF‐ZnO nanocomposite film‐based nanogenerators attributed to the enhancement of electroactive β‐phase and enhanced d₃₃ value in PVDF with the addition of ZnO nanorods.     

Study of a plasticized‐unoriented P(VF2/VF3) (73/27 mol%) copolymer. I. The effects of crystallization conditions on morphology,physical, and thermal properties

The results of a study on the effects of a plasticizer, tricresyl phosphate, on the mechanical and thermal properties of unoriented films of poly(vinylidene fluoride–trifluoroethylene) (VF₂/VF₃) copolymer (73/27 mol%) are presented. Films were prepared by both quenching and slow‐cooling from the melt with plasticizer concentrations of 0, 5, and 10% by weight. For the slow‐cooled films, a reduction in crystallinity by 25% was observed for the heavily plasticized films, together with a reduced dynamic mechanical modulus (≈ 58%) and an increased dielectric constant (≈ 200%). For the quenched films, a small increase in crystallinity was observed together with a reduced modulus and an increased dielectric constant. Measurements of the temperature dependence of the modulus and dielectric constant at 10 Hz. were also carried out from −100°C to 100°C. This data showed that for slow‐cooled films the glass transition temperature decreased from −28°C to ‐52°C at the highest doping level. DSC thermal analysis shows a decrease in the Curie transition (≈ 4°C) and melting temperatures (≈ 9°C) for the quenched films, while the slow‐cooled films only showed a decrease in melting temperature (≈ 10°C), while the Curie transition temperature was unaffected. In addition, evidence of a two‐phase system or a nonferroelectric crystal phase is noted by the presence of two Curie transition temperature peaks. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 19–28, 1999     

Establishing effective simulation protocols for β‐ and α/β‐peptides. III. Molecular mechanical model for acyclic β‐amino acids

All‐atom molecular mechanics (MM) force field parameters are developed for the backbone of acyclic β‐amino acid using an improved version of the multiobjective evolutionary algorithm (MOEA). The MM model is benchmarked using β³‐homo‐Alanine (β³‐hAla) diamide in water with SCC‐DFTB/MM simulations as the reference. Satisfactory agreements are found between the MM and SCC‐DFTB/MM results regarding the distribution of key dihedral angles for the β³‐hAla diamide in water. The MM model is further applied to a β‐hepta‐peptide in methanol solution. The calculated NOE values and ³J coupling constants averaged over different trajectories are consistent with experimental data. By contrast, simulations using parameters directly transferred from the CHARMM22 force field for proteins lead to much worse agreement, which highlights the importance of careful parameterization for non‐natural peptides, for which the improved MOEA is particularly useful. Finally, as an initial application of the new force field parameters, the behaviors of a short random copolymer consisting of β amino acids in bulk solution and membrane/water interface are studied using a generalized Born implicit solvent model (GBSW). Results for four selected sequences show that segregation of hydrophobic and cationic groups occur easily at the membrane/solution interface for all sequences. The sequence that features alternating short blocks exhibits signs of lower stability at the interface compared to other sequences. These results confirm the hypothesis in recent experimental studies that β‐amino‐acid based random copolymers can develop a high degree of amphiphilicity without regular three‐dimensional structure. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Synthesis of novel α,α′,β-trisubstituted β-lactones

A concise and efficient synthesis of α,α′,β-trisubstituted β-lactones is presented. These novel lactones are easily obtained in five steps and will be dedicated to anionic ring opening polymerization.     

Nucleation characteristics of the α/β compounded nucleating agents and their influences on crystallization behavior and mechanical properties of isotactic polypropylene

Nucleation characteristics of isotactic polypropylene (iPP) nucleated by the α/β compounded nucleating agents (NAs) were investigated by wide‐angle X‐ray scattering, differential scanning calorimetry and mechanical testing. The results showed that the nucleation effect of the α/β compounded NAs depends on not only nucleation efficiency (NE) of individual β and α NAs and their ratios but also the processing conditions, especially the cooling rates. The nucleating characteristics of the α/β compounded NAs can be illustrated by competitive nucleation. The NA with high NE played a leading role during iPP crystallization even at a low weight ratio and at different cooling rates. The stiffness and toughness of iPP can be simultaneously improved by using suitable compositions at the appropriate ratios. Finally, the nonisothermal crystallization kinetics of iPP nucleated with the α/β compounded NAs was described by Caze method and the crystallization activation energy of nucleated iPP was calculated by Kissinger equation. The result indicated that the crystal growth pattern of nucleated iPP was heterogeneous nucleation followed by three‐dimension spherical growth. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 653–665, 2010     

Dynamic mechanical studies of α and β relaxations of polyethylenes

The α and β relaxations of a variety of polyethylenes have been extensively studied using lowfrequency dynamic mechanical methods. The main focus of this work has been both the control and the quantitative measurement of the key structural factors that describe semicrystalline polymer systems. The structural factors that have been examined in detail include the level of crystallinity, the crystallite thickness, the interfacial content, and the supermolecular structure. Consequently a variety of other types of supplementary measurements were made to accomplish the necessary characterization. The location of the α transition is found to depend primarily on the crystallite thickness. There also is the distinct possibility that the interfacial structure exerts an important influence. The level of crystallinity and the supermolecular structure do not play a significant role in the location of T_α. A strong correlation is found with the carbon-13 NMR crystalline T₁, which is reported in a separate paper. From analysis of the influence of the different structural factors on the β transition, it is concluded that this transition results from the relaxation of chain units which are located in the interfacial region. The elusiveness of this transition and the contradictory reports that have existed in the literature are given a ready explanation. The enhancement of this transition by branching and copolymerization follows naturally as does its invariance with counit content.     

Spectroscopic study of α- and β-phase isotactic polypropylene and of atactic polypropylene in solution

Raman spectroscopy is used to investigate the conformation and packing of isotactic crystalline α-phase polypropylene compared with lower-order β-phase isotactic polypropylene and to study the solution behavior of atactic polypropylene. The high-frequency region of the spectrum is analyzed in light of a normal-mode calculation that takes into account the methyl-group vibrations. This region is sensitive to both chain conformation and packing, and because of the high intensity of the methyl and methylene high-frequency stretching modes, it can be used to probe small changes in intermolecular or intramolecular order. Differences in the thermal behavior between the two solid isotactic polypropylene samples are explained interms of packing defects which exist in the β-phase form. In the solution study, we demonstrate that, for molecules in which bands sensitive to intermolecular interactions exist, as is the case of the methyl and methylene vibrations of polypropylene, spectroscopic techniques can be used to estimate the minimum overlap concentration.     

Solid‐state drawing of β‐nucleated polypropylene: Effect of additives on drawability and mechanical properties

Isotactic polypropylene (i‐PP) can crystallize in different crystal modifications. In this article, the effect of sepiolite (one‐dimensional) and carbon black (three‐dimensional) fillers on the solid‐state drawability of i‐PP is discussed. The cross‐hatched structure of thermodynamically most stable α‐crystal phase in i‐PP does not allow for perfect chain alignment during solid‐state drawing. The β‐phase i‐PP, obtained by addition of specific nucleating agents, crystallizes in a non‐cross‐hatched spherulitic structure and allows more easy drawing. Depending on the filler type, β–α transformation takes place at different draw ratios, as was observed by in situ wide‐angle X‐ray diffraction measurements. It was observed that β‐nucleated i‐PP has a lower yield stress and can be drawn further than i‐PP crystallized in the α‐crystal phase. If added in the right amount, both carbon black and sepiolite have a reinforcing effect on PP tapes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1071–1082     

The Generation of Difluoroketenimine and Its Application in the Synthesis of α,α‐Difluoro‐β‐amino Amides

Fluorine‐containing β‐amino acids and their derivatives have attracted significant attention due to their importance in life sciences. Herein the previously unknown difluoroketenimine, the analogue of the elusive difluoroketene, has been generated by the reaction of difluorocarbene and isocyanide, which further undergoes [2+2] cycloaddition with imine. The three‐component reaction affords α,α‐difluoro‐β‐amino amides in good yields. Mechanistic studies reveal the unique properties of the difluoroketenimine in the [2+2] cycloaddition with imine.     

Structure and mechanical properties controlling of elastomer modified polypropylene by compounded β/α nucleating agents

Previous work showed that there was a synergistic effect of nucleating agent (NA) and elastomer in improving the fracture resistance of isotactic polypropylene (PP), relating to the formation of large amounts of β‐PP (β‐NA nucleated system) or the decrease of the spherulites diameters of α‐PP (α‐NA nucleated system). To find the direct relation between the synergistic efficiency of NA/elastomer and the microstructures of the materials, in this work, the ethylene‐propylene‐diene terpolymer (EPDM) modified PP blends with compounded NAs (β/α) were adopted and the changes of the microstructure and mechanical properties were investigated comparatively. The results showed that, with the adjustment of the mass fraction of compounded NAs, the microstructures of PP matrix including supermolecular structure and the relative fraction of β‐PP (K_β) change accordingly. Specifically, the K_β of β‐PP was successfully adjusted in the wide range of 0–78.9%. Consequently, the stiffness and the fracture resistance of the PP/EPDM blends were easily controlled in different degrees. It is believed that this work could provide a guide map for the design and preparation of certain polymer blends satisfying certain requirement. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and Reactivity of Nickel‐Stabilised μ2:η2,η2‐P2, As2 and PAs Units

The reactivity of two paramagnetic nickel(I) compounds, CpNi(NHC) (where Cp=cyclopentadienyl; NHC=1,3‐bis(2,4,6‐trimethylphenyl)imidazol‐2‐ylidene (IMes) or 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene (IPr)), towards [Na(dioxane)_x][PnCO] (Pn=P, As) is described. These reactions afford symmetric bimetallic compounds (μ²:η²,η²‐Pn₂){Ni(NHC)(CO)}₂. Several novel intermediates en route to such species are identified and characterised, including a compound containing the PCO^? anion in an unprecedented μ²:η²,η²‐binding mode. Ultimately, on treatment of the (μ²:η²,η²‐Pn₂){Ni(IMes)(CO)}₂ compounds with carbon monoxide, the Pn₂ units can be released, affording P₄ in the case of the phosphorus‐containing species, and elemental arsenic in the case of (μ²:η²,η²‐As₂){Ni(IMes)(CO)}₂.     

Synthesis and structure of the unsymmetrical β-diimine precursor: The β-iminoamine

The reaction of benzoylacetone with ortho-substituted aniline derivatives gives the unsymmetrical β-iminoamine ligands (5–8) with high yields. A convenient synthesis is described. These compounds have been characterized by NMR and IR spectroscopies. The structure of the β-iminoamine 5, 3-N-(2,6-diisopropylphenylamino)-1-phenyl-1N-(2,6-diisopropylphenylimino)but-2-ene, was solved by X-ray diffraction methods.     

Experimental and Theoretical Studies on the Rearrangement of 2‐Oxoazepane α,α‐Amino Acids into 2′‐Oxopiperidine β2,3,3‐Amino Acids: An Example of Intramolecular Catalysis

Enantiopure β‐amino acids represent interesting scaffolds for peptidomimetics, foldamers and bioactive compounds. However, the synthesis of highly substituted analogues is still a major challenge. Herein, we describe the spontaneous rearrangement of 4‐carboxy‐2‐oxoazepane α,α‐amino acids to lead to 2′‐oxopiperidine‐containing β^2,3,3‐amino acids, upon basic or acid hydrolysis of the 2‐oxoazepane α,α‐amino acid ester. Under acidic conditions, a totally stereoselective synthetic route has been developed. The reordering process involved the spontaneous breakdown of an amide bond, which typically requires strong conditions, and the formation of a new bond leading to the six‐membered heterocycle. A quantum mechanical study was carried out to obtain insight into the remarkable ease of this rearrangement, which occurs at room temperature, either in solution or upon storage of the 4‐carboxylic acid substituted 2‐oxoazepane derivatives. This theoretical study suggests that the rearrangement process occurs through a concerted mechanism, in which the energy of the transition states can be lowered by the participation of a catalytic water molecule. Interestingly, it also suggested a role for the carboxylic acid at position 4 of the 2‐oxoazepane ring, which facilitates this rearrangement, participating directly in the intramolecular catalysis.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Facile Preparation of Homoallyl β′，γ′—Unsaturated Amines via 1,2—Addition of α，β—Unsaturated Imines with Allylsamarium Bromide

A series of homoallyl β′，γ′-unsaturated amines were synthe sized via 1,2-addition of α，β-unsaturated imines with allylsamarium bromide in excellent yields under mild and neutral conditions.     

Intricate relation between the content and interactive roles of β‐cyclodextrin in fixing the characteristics of conducting polyaniline composites

This work is an investigation of the influence of β‐cyclodextrin (CD) on the synthesis and characteristics of conducting polyaniline composites (PCDs). In a systematic way, this influence was studied with two different approaches for five PCDs: (1) increasing the initial CD content under identical preparation conditions (three composites: PCD1, PCD2, and PCD3) and (2) using the same initial CD content (as in PCD2) under different preparation conditions (two composites: PCD4 and PCD5). The quite unexpected order of the electrical conductivity (PCD2 < PCD3 < PCD1 < PCD4 < PCD5), the IR and ultraviolet–visible spectroscopy features, and the scanning electron microscopy characteristics (the particle size decreased from PCD1 to PCD3 but increased for PCD4 and PCD5) all exposed and confirmed the markedly different physicochemical characteristics associated with the two groups of composites. PCD5 remained unique among the five (prepared in i‐PrOH–H₂O–acid; the other four were prepared in H₂O–acid). Differences in the characteristics existed within the group also. The development of all these characteristics in an unrelated order was found to originate from the amount of CD in its two roles as encapsule and dopant toward polyaniline. The interrelation between the content and roles of CD was, however, intricate in combination with the experimental conditions employed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 281–294, 2006