Über Tris[(trialkylphosphan)gold(I)]oxonium-tetrafluoroborate und Tris[(triphenylphosphan)gold(I)]sulfonium-tetrafluoroborat

On Tris[(trialkylphosphine)gold(I)]oxonium Tetrafluoroborates and Tris[(triphenylphosphine)gold(I)]sulfonium Tetrafluoroborate [Et₃PAu]⁺BF, obtained from Et₃PAuCl and AgBF₄ in tetrahydrofuran, reacts with KOH (molar ratio 3:1) to give the oxonium salt [(Et₃P)Au]₃O⁺BF ( 1 ). The homologous [^t(Bu₃P)Au]₃O⁺BF ( 2 ) is generated similarly from ^tBu₃PAuCl and Ag₂O in the presence of NaBF₄ in THF. The composition and identity of these two first tris[(tri alkyl phosphine)gold(I)]oxonium salts have been confirmed by analytical and spectroscopic data. The compounds are useful aurating agents. From the corresponding triphenylphosphine complex and (Me₃Si)₂S quantitative yields of the sulfonium salt [(Ph₃P)Au]₃S⁺BF ( 3 ) are obtained. Its crystal structure features monomeric cations, and in these small Au? S? Au angles indicate significant metal-metal bonding.     

Some Tris[(triorganophosphine)gold(I)]-oxonium and -Organoimonium Tetrafluoroborates with Bulky Substituents

Tris{[tri(2-methylphenyl)phosphine]gold(I)}-, tris{[tri(2,4,6-trimethylphenyl)phosphine]gold(I)}- and tris{[tri(cyclohexyl)phosphine]gold(I)}-oxonium tetra-fluoroborate ( 1?3 ) have been prepared from the corresponding (phosphine)gold(I) chlorides, silver oxide, and sodium tetrafluoroborate in acetone. These oxonium salts are excellent aurating agents for primary amines. Thus in the reaction with 1, t -butylamine ^tBuNH₂ and aniline PhNH₂ are readily converted into the tri nuclear imino complexes {[(2-MeC₆H₄)₃P]Au}₃N^tBu⁺BF₄^? ( 4 ) and {[(2-MeC₆H₄)₃P]Au}₃NPh⁺BF ( 5 ) in high yields. With 3 , both aniline and 8-amino-quinoline also give the tri nuclear complexes, i.e. {[(c-C₆H₁₁)₃P]Au}₃ NPh⁺BF ( 6 ) and {[(c-C₆H₁₁)₃P]Au}₃N(C₉H₆N)⁺BF ( 7 ). Auration of aniline with the most sterically hindered reagent 2 yields only the bi nuclear complex {[2,4,6-Me₃C₆H₂)₃P] · Au}₂N(Ph)H⁺BF ( 8 ). The reagents 1?3 and the Products 4 – 8 have been characterized by analytical and NMR spectroscopic data, and the crystal structures of compounds 4 and 6 have been determined by single crystal x-ray diffraction. In the cations of 4 , a triangle of gold atoms with short Au — Au contacts [3.036(1), 3.107(1), and 3.214(1) Å] forms a steep pyramid with the nitrogen atom, in which the angles Au? N? Au are all much smaller than the tetrahedral standard of 109.7°: 94.8(4), 98.1(4), and 103.0(4)°. This triangular Au₃ unit is staggered relative to the three methyl groups of the ^tBu substituent at nitrogen. The results for 6 are similar [Au — Au: 3.037(1), 3.071(1), and 3.222(1) Å; Au? N? Au: 95.3(3), 96.5(3), and 103.6(3)°]. Variable temperature NMR studies of compounds 3 and 8 show hindered rotation of the mesityl groups about the P? C bonds of the ligands originating from the steric congestion within each tertiary phosphine.     

Direct imaging of smectic B phase of poly(p-xylylene)

Single crystals of poly(p-xylylene) were grown in dilute α-methylnaphthalene solution and studied by bright-field and high-resolution electron microscopy (HREM). The crystallization process was discussed in terms of the dependence of crystal form on crystallization conditions. A 0.15 nm resolution was achieved from high-resolution images of a frozen liquid crystalline phase. High-temperature electron diffraction patterns confirmed the existence of the liquid-crystalline phase in agreement with previous work of Lieser. The HREM images show the molecular packing in the smectic B phase. © 1992 John Wiley & Sons, Inc.     

Influence of the solvent on the spreading of poly[(D,L-lactic acid)-co-(glycolic acid)] monolayers

 The properties of mono layers of poly[(D,L-lactic acid)-co-(glycolic acid)] (PLA/GA) are strongly conditioned by the nature of the solvent from which they are spread. In this work, we studied the properties of PLA/GA films deposited on water from acetonitrile (a poor spreading solvent) and chloroform (a good one), observing marked differences with regard to the influence of the pH, temperature and ionic strength of the subphase. These differences were attributed to the structure of PLA/GA at the air/water interface, being pre-determined by its structure in the bulk spreading solvent (closely coiled in acetonitrile, unfolded in chloroform). Viscosity measurements on acetonitrile and chloroform solutions of PLA/GA, and the calculation of the corresponding intermolecular expansion factor, α, confirmed that PLA/GA was better solvated by chloroform than by acetonitrile, in which intramolecular interactions between polymer segments, and thus coiling, will therefore have predominated over polymer–solvent interactions. Received: 14 October 1996 Accepted: 7 January 1997     

High yield synthesis of biodegradable poly(propylene carbonate) from carbon dioxide and propylene oxide

A novel SalenCo^III (2,4‐dinitrophenoxy) (Salen = N,N'‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamino) and 1,10‐phenanthroline monohydrate catalyst system was designed and employed for the copolymerization of CO₂ and propylene oxide (PO). The perfectly alternating copolymerization of CO₂ and PO proceeds effectively under middle temperature and pressure to yield poly(propylene carbonate) with a high yield and a high number average molecular weight of polymer. The structure of polymer was characterized by the IR and NMR measurements. The perfectly alternating copolymer was confirmed. The MALDI‐TOF spectrum insinuates that the copolymerization of CO₂ and PO was initiated by H₂O. Copyright © 2016 John Wiley & Sons, Ltd.     

Grafting reactions of vinyl acetate onto poly[(vinyl alcohol)-co-(vinyl acetate)]

The grafting preference of vinyl acetate onto the methine carbon of poly(vinyl alcohol) (PVOH) versus the acetate group of poly(vinyl acetate) (PVAc) was determined as part of an attempt to prepare novel branched PVOH from partially hydrolyzed PVAc. The results showed long chain grafting on the acetate groups of the PVAc units rather than the methine carbons of the PVOH or PVAc units. Decreasing the monomer or initiator concentration decreased the molecular weight of the graft copolymer formed. Of the initiators studied, ammonium persulfate gave the largest increase in copolymer molecular weight. Both hydrolysis and reacetylation combined with gel permeation chromatography (GPC) and ¹³C-NMR of the fully hydrolyzed material were used to estimate the number and location of grafts. © 1996 John Wiley & Sons, Inc.     

Glassy carbon electrode modified by new Copper(I) oxide nanocomposite for glucose detection: An electroanalysis study

The Glucose amount of human blood is very vital because in higher levels than allowed value the corporal biological system was hampered. Therefore, in this study, the Cu₂O was deposited on the reduced Graphene oxide (RGO) by polydopamin (PDA) as linker. The new RGO‐PDA‐Cu₂O nanocomposite was deposited on the glassy carbon electrode (GCE) surface after its characterization by UV–Visible, fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), Energy‐dispersive X‐ray (EDX), transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM) techniques. The electroanalysis of the new electrode was investigated by the cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) methods. The obtained detection limit of glucose (Glu) showed that the deposited GCE by RGO‐PDA‐Cu₂O nanocomposite has a high potential for its diagnosis. In addition, this electrode was applied to the Glu detection as biosensor in real samples in order to utilize in commercial applications.     

癸二酸己二醇酯/己二酸二醇酯共聚物的合成及热性能

癸二酸己二醇酯/己二酸二醇酯共聚物的合成及热性能;直接聚合;可降解聚合物     

Effects of the conductivity of sulfonated poly(phenylene oxide) lithium by the complexation of poly(ethylene oxide)

In the present paper, the structure and conductivity for the complex of sulfonated poly(phenylene oxide) lithium (SPPOLi) and poly(ethylene oxide) (PEG) were studied. Glass transition temperature change determined by differential scanning calorimeter analysis desmonstrated that the two components had some compatibility. X-ray diffraction showed that PEG could decrease the regularity of SPPOLi to some extent. The compatibility and PEG's effect on the regularity may be due to the interaction between the lithium ions of SPPOLi and the oxygen atoms of PEG. Under polarization by electric field, the bands between lithium ions and sulfonation groups relaxed. Meanwhile, the complexation of oxygen atoms could enhance the dissociation of the polymeric lithium salts. Then lithium ions were transported in the process of alternate complexing and decomplexing. The action between lithium ions and oxygen atoms could explain the improvement on the conductivity of SPPOLi.     

Copper(I) and silver(I) complexes of bridging bis(quinaldinyl)phenylphosphine oxide ligand

Abstract

A novel tertiary phosphine oxide containing two quinaldinyl substituents has been synthesized according to adapted literature procedures. Its coordination properties toward Cu(I) and Ag(I) were investigated and the resulting complexes were analyzed by single crystal X-ray diffraction. Multinuclear complexes are formed, wherein the ligand is bridging across two metal centers. Though for the silver complex, no argentophilic interactions are present. The copper complex was characterized further by multinuclear NMR spectroscopy at variable temperatures.     

Copper(I) Complexes of Bithiazoles

Several new copper(I) complexes of a group of bidentate bithiazole ligands have been isolated. The compounds prepared are bis(2,2′-dimethyl-4,4′-bithiazole)copper(I) perchlorate ([Cu(me-b)₂]ClO₄), bis(4,4′-dimethyl-2,2′-bithiazole)copper(I) perchlorate ([Cu(me-i)₂]ClO₄), bis(2,2′-diphenyl-4,4′-bithiazole) copper(I) perchlorate ([Cu(ph-b)₂]ClO₄), bis(4,4′-diphenyl-2,2′-bithiazole)copper(I) perchlorate ([Cu(ph-i)₂]ClO₄), bis(4,4′,5,5′-tetraphenyl-2,2′-bithiazole)-copper(I) perchlorate ([Cu(ph₄-i)₂]ClO₄, bis(2,2′-bithiazole)copper(l) perchlorate ([Cu(i)₂]CIO₄), 2,2′-bithiazolecopper(I) perchlorate ([Cu(i)ClO₄), (2,2′-bithiazole)bis(triphenylphosphinesulfide)copper(I) perchlorate ([Cu(i)(SPph₃)₂]ClO₄,(2,2′-bithiazole)bis-( triphenylphosphine)copper(I) perchlorate ([Cu(i)(Pph₃)₂]ClO₄), and (4,4′-bithiazole)bis(triphenylphosphine) copper(I) perchlorate ([Cu(b)(Pph₃)₂]ClO₄). Several synthetic techniques were required including one developed in this work which involved the conversion of [Cu(Pph₃)₄]ClO₄ into the thiophosphine complex by reaction with sulfur and subsequent use of this as a labile precursor complex. Optical spectra of the complexes indicate extensive solution dissociation. Several of the complexes ([Cu(ph-b)₂]ClO₄, [Cu(ph-i)₂]CIO₄, and [Cu(i)(Pph₃]ClO₄) were photoluminescent in the solid; one ([Cu(ph-b)₂]ClO₄) showed extensive loss of emission during irradiation. Most of the complexes prepared here appear to bind through the thiazole nitrogen atoms. However, infrared evidence suggests that in two of the complexes thiazole sulfur atoms participate in the bonding.     

Cyclopropanation of poly(isoprene) using NHC-Cu(I) catalysts: Introducing carboxylates

The incorporation of functional groups into unsaturated polyolefine-polymers often represent a challenging task. Based on the known cyclopropanation of double bonds with diazoesters in the presence of metal-catalysts of low molecular weight compounds, we in this article develop an approach to decorate the polymer backbone of poly(diene)s with ester as well as carboxylic groups via cyclopropanation. Therefore, predominantly cis-1,4-poly(isoprene)s are converted with ethyl or tert-butyl diazoacetate using copper(I) N-heterocyclic carbene (NHC) catalysts, while focusing on the technically relevant cyclohexane as solvent. The application of commercially available NHC-Cu(I) catalysts results in modification degrees of 4–5%, while an increased solvent polarity, like dichloromethane, results in up to 17% modification. The resulting esters were further converted to the corresponding free carboxylic groups by deprotection using trifluoroacetic acid. Thus, an introduction of functional groups along the polymer backbone with a wide variety of application, like ionic interaction or hydrogen bonding motifs, was successfully demonstrated. Its potential for upscaling makes this approach feasible for an application in large-scale production processes, such as for manufacturing of modified synthetic rubbers.     

Synthesis,Structure, and Photophysical Properties of Yellow-Green and Blue Photoluminescent Dinuclear and Octanuclear Copper(I) Iodide Complexes with a Disilanylene-Bridged Bispyridine Ligand

The synthesis, structural, and photophysical investigations of CuI complexes with a disilanylene-bridged bispyridine ligand 1 are herein presented. Dinuclear (2) and ladder-like (3) octanuclear copper(I) complexes were straightforwardly prepared by exactly controlling the ratio of CuI/ligand 1. Single-crystal X-ray analysis confirmed that dinuclear complex 2 had no apparent π…π stacking whereas octanuclear complex 3 had π…π stacking in the crystal packing. In the solid state, the complexes display yellow-green (λ_em = 519 nm, Φ = 0.60, τ = 11 µs, 2) and blue (λ_em = 478 nm, Φ = 0.04, τ = 2.6 µs, 3) phosphorescence, respectively. The density functional theory calculations validate the differences in their optical properties. The difference in the luminescence efficiency between 2 and 3 is attributed to the presence of π…π stacking and the different luminescence processes.     

Lipase-catalyzed synthesis and properties of poly[(12-hydroxydodecanoate)-co-(12-hydroxystearate)] directed towards novel green and sustainable elastomers

Novel green and sustainable elastomers having both good biodegradability and chemical recyclability properties were designed and synthesized using potentially biobased materials and lipase as an environmentally benign catalyst. High molecular weight poly[(12-hydroxydodecanoate)-co-(12-hydroxystearate)] [poly(12HD-co-12HS)] samples with varying monomer ratios were prepared by the polycondensation of 12-hydroxydodecanoic acid and methyl 12-hydroxystearate using immobilized lipase from Candida antarctica (IM-CA) in toluene in the presence of molecular sieves 4A at 90 degrees C. Although poly(12HD) is a highly crystalline polyester having a melting temperature (T(m)) of 87.6 degrees C and crystalline temperature (T(c)) of 64 degrees C, by the copolymerization of 12HD with 12HS, both the T(m) and T(c) of the copolymer decreased with increasing 12HS contents, and poly(12HD-co-12HS) containing more than 60 mol-% 12HS was a viscous liquid at room temperature. At the same time, the Young's modulus and hardness also decreased with increasing 12HS content, and poly(12HD-co-36 mol-% 12HS) exhibited an elastic behavior, having a hardness of 70 A using a durometer A. In addition, it showed an excellent biodegradability by activated sludge and chemical recyclability by lipase.     

Copper(I)-Catalyzed Cycloaddition of Methyl O-Propargylpodocarpate and Azides at Room Temperature

Copper iodide was employed as an efficient catalyst for the synthesis of 1,2,3-triazole derivatives of podocarpic acid at room temperature through “click” chemistry cycloaddition reactions of methyl O-propargylpodocarpate and propargyl O-propargylpodocarpate with azides.

Indium(I) iodide mediated efficient synthesis of selenoglycosides

A convenient odorless methodology has been developed for the preparation of selenoglycosides through indium(I) iodide mediated cleavage of diselenides and reaction with glycosyl bromides. The yields were excellent in all cases. Retention of the configuration at the anomeric center was observed in each case.     

Study of the Crystallization Kinetics. Poly(ethylene oxide) and a blend of poly(ethylene oxide) and poly(bisphenol A-co-epichlorohydrin)

A kinetic study of the crystallization of poly(ethylene oxide) (PEO) and of a blend of PEO+poly(bisphenol A-co-epichlorohydrin) (PBE) was performed by using DSC in a non-isothermal program at constant cooling rates. The curves obtained were analyzed by the Kissinger, Ozawa and Friedman methods, with determination of the kinetic parameters in each case. As a consequence of the presence of PBE, the kinetic parameters were altered, leading to the conclusion that PBE has some influence on the crystallization of PEO, modifying its mechanism. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal and dynamic mechanical properties of poly(propylene carbonate)

Summary Thermal and dynamic mechanical properties of carbon dioxide and propylene oxide alternative copolymer, poly(propylene carbonate) (PPC), and the end-capped PPC with maleic anhydride were investigated by means of TG and DMA. A master curve of the storage modulus vs. frequency can be deduced from the isochronal curves. Physical parameters of both plain and MA end-capped PPC were discussed. The results showed that for maleic anhydride (MA) end-capping PPC, an improvement of its thermal stability and mechanical properties accompanied with some modifications of the viscoelastic behavior were obtained.     

Preparation and characterization of modified graphite oxide/poly(propylene carbonate) composites by solution intercalation

Modified graphite oxide (MGO)/Poly (propylene carbonate) (PPC) composites with excellent thermal and mechanical properties have been prepared via a facile solution intercalation method. An intercalated structure of MGO/PPC composites was confirmed by X-ray diffraction and scanning electron microscope. The thermal and mechanical properties of MGO/PPC composites were investigated by thermal gravimetric analysis, differential scanning calorimetric, dynamic mechanical analysis, and electronic tensile tester. Due to the nanometer-sized dispersion of layered graphite in PPC matrix and the strong interfacial interaction between MGO and PPC, the prepared MGO/PPC composites exhibit improved thermal and mechanical properties in comparison with pure PPC. Compared with pure PPC, the MGO/PPC composites show the highest thermal stability and the T_g is 13.8 °C higher than that of pure PPC, while the tensile strength (29.51 MPa) shows about 2 times higher than that of pure PPC when only 3.0 wt.% MGO is incorporated. These results indicate that this approach is an efficient method to improve the properties of PPC.