Vinyl Polymerization. 436. Effect of Magnetic Field on Uncatalyzed Polymerization

The radical polymerization of vinyl monomers initiated with several kinds of hydrophilic macromolecule was carried out in a magnetic field. The magnetic field promoted the polymerization; the conversion of monomers and the molecular weight of the polymers obtained increased with increasing field strength in the range of 0–0.1 T. The dependence of the composition and tacticity of the mother polymer on the magnitude of the magnetic field was studied. Using graft or block copolymers, which consisted of hard and soft segments, the effect of a magnetic field was further investigated. The degree of hardness and tightness of the hydrophobic areas (reaction areas) formed by the mother polymer in the aqueous solution was found to affect the magnetic field effect on the uncatalyzed polymerization. The overall activation energy obtained in the magnetic field was almost equal to that obtained without a magnetic field.     

Vinyl polymerization with Fe(III)-thiourea as initiator system. Part I. General features and kinetics of Fe(ClO4)3-thiourea reaction

Initiation of polymerization of methyl methacrylate, styrene, and acrylonitrile with the redox system Fe(III)—thiourea has been examined. For the heterophase polymerization any of the ferric salts, such as FeCl₃, Fe₂(SO₄)₃, and Fe(ClO₄)₃ can be used as oxidant, but there is no polymerization in the homogeneous phase when FeCl₃ is used as oxidant. It was also observed that Fe(ClO₄)₃ retards the radical polymerization of styrene, though this salt has hardly any effect on the radical polymerization of methyl methacrylate. Further, the reaction between Fe(ClO₄)₃ and thiourea was found to be kinetically of second order. The rate is largely influenced by the nature of the solvent. It is concluded that apart from the dielectric constant of the solvents, specific effects like complex formation of Fe(III) with solvents should have a marked influence on the rate of this reaction.     

Polymerization in magnetic field. XVI. Kinetic aspects regarding methyl methacrylate polymerization in high magnetic field

The effect of a high magnetic field of 7 T in the reaction of methyl methacrylate polymerization is emphasized. The intervening magnetokinetic modifications are correlated with the system of radical initiation with benzoyl peroxide, 2,2′‐azobis(2‐methylpropionitrile), 4,4′‐azobis(4‐cyanopentanoic acid), and 1,1′‐azobis(cyclohexane‐1‐carbonitrile). The characterization of the synthesized polymers is correlated with the reaction conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5678–5686, 2004     

Mechanism of charge-transfer polymerization. V. Photopolymerization and photocyclodimerization of N-vinylcarbazole in the N-vinylcarbazole–oxygen–solvent system

Photochemical reactions of N-vinylcarbazole (VCZ), studied in various solvents, were profoundly influenced by the atmosphere. In the deaerated system radical polymerization of VCZ occurred in various solvents, e.g., tetrahydrofuran, acetone, ethyl methyl ketone, acetonitrile, methanol, sulfolane, N,N-dimethylformamide (DMF), or dimethyl sulfoxide (DMSO). By contrast, when dissolved oxygen was present, cyclodimerization of VCZ occurred exclusively to give trans-1,2-dicarbazole-9-yl-cyclobutane in such polar, basic solvents as acetone, ethyl methyl ketone, acetonitrile or methanol. In stronger basic solvents, i.e., sulfolane, DMF, or DMSO, simultaneous radical polymerization and cyclodimerization of VCZ proceeded, the ratio of the cyclodimerization to the radical polymerization decreasing in the order, sulfolane > DMF > DMSO. In dichloromethane, on the other hand, cationic polymerization of VCZ occurred irrespective of the atmosphere. It is suggested that oxygen acts as an electron acceptor to the excited VCZ, electron transfer occurring in polar solvents from the excited VCZ to oxygen to give transient VCZ cation radical. The effect of solvent basicity on the photocyclodimerization of VCZ is discussed.     

Controlled/“Living” Radical Polymerization Applied to Water‐Borne Systems

Atom transfer radical polymerization (ATRP), a controlled/“living” radical polymerization, has been extended to water‐borne polymerization systems. In order to obtain a controlled ATRP reaction in a water‐borne system, various criteria must be met, which are not necessary when conducted in organic solvents. The effect of surfactant, monomer, catalyst and initiator employed will be discussed, as each had a profound effect on the success of the ATRP reaction.     

Stereocontrol Study in Radical Polymerization of 2-Acrylamido-2-methylpropane Sulfonic Acid in the Presence of Lewis Acids

Tacticity of poly-2-acrylamido-2-methylpropane sulfonic acid samples that were prepared via free radical polymerization in four different solvents, ethanol, dimethyl sulphoxide (DMSO), N, N-dimethylformamide (DMF) and water, were studied by ¹³C nuclear magnetic resonance (¹³C-NMR) techniques. In order to change isotacticity, two rare metal triflates, yttrium trifluoromethane sulfonate (Y(OTf)₃) and ytterbium trifluoromethane sulfonate (Yb(OTf)₃), were used. The stereoregularity of the obtained polymers in DMSO, water and DMF in the presence of the mentioned triflates did not show a noticeable alteration. But isotacticity of the samples prepared in ethanol was increased by about 17% in the presence 75 wt% Y(OTf)₃. In the absence of metal triflates, solvents did not have any significant effect on stereocontrol. In addition, the influence of temperature on isotacticity of the prepared samples was studied. By decreasing the reaction temperature, the isotacticity increased slightly.     

Surface initiated ATRP in the synthesis of iron oxide/polystyrene core/shell nanoparticles

A method to prepare magnetic nanoparticles with a covalently bonded polystyrene shell by surface initiated atom transfer radical polymerization (ATRP) was reported. First, the initiator for ATRP was covalently bonded onto the surface of magnetic nanoparticles through our novel method, which was the combination of ligand exchange reaction and condensation of triethoxysilane having an ATRP initiating site, 2-bromo-2-methyl-N-(3-(triethoxysilyl)propyl) propanamide. Then the surface initiated ATRP of styrene mediated by a copper complex was carried out and exhibited the characteristics of a controlled/“living” polymerization. The as-synthesized nanoparticles were coated with well-defined PS of a target molecular weight up to 45 K. These hybrid nanoparticles had an exceptionally good dispersibility in organic solvents and were subjected to detailed characterization using DLS, GPC, FTIR, XPS, UV-vis, TEM and TGA.     

Effect of sovents on radiation-induced ionic graft polymerization

The influence of various solvents on radiation-induced cationic (grafting of vinyl-n-butyl ether onto polyethylene) and anionic (grafting of 2-methyl-5-vinylpyridine onto polyethylene) graft polymerization was studied. This ionic grafting was performed in thoroughly dried systems at room temperature. It was established that electron-acceptor solvents promote cationic grafting but that electron-donor solvents promote the anionic. A clear correlation between the donor number of solvents and grafting value by the anionic mechanism was shown. There was no correlation between dielectric constants and grafting values. The reaction orders, according to monomer concentration by 2-methyl-5-vinylpyridine grafting in various solvents, were equal to approximately 1.5 and 2 for the radical and anionic mechanisms, respectively. The effect of solvents on radiation-induced ionic graft polymerization is discussed. The results of this study indicate the correct choice of solvents for radiation-induced ionic grafting.     

The influence of paramagnetic impurities on magnetic effects in radical reactions

The influence of paramagnetic impurities on magnetic and spin effects in radical reactions in liquid solutions is treated. The recombination probability of a radical pair is obtained. It is shown, that at high impurity concentration or in high-viscosity solvents the effect of the magnetic field vanishes.     

Observation of magnetic field effect on polymer yield in photoinduced dispersion polymerization of styrene

Photoinduced dispersion polymerization of styrene in the presence of dibenzyl ketone as a photoinitiator, with or without magnetic field, has been followed with time. The experiments were carried out at low degrees of conversion of monomer. Since the conditions of the polymerization reaction (viscosity of the medium, reagents concentration, etc.) were approximately unchanged, the results were explained on the basis of a simplified model of dispersion polymerization. The normal growth of the polymerization rates with temperature was registered, and the activation energy of the polymerization was estimated to be about 12 kJ/mol in the temperature range from 20 to 60 °C. The magnetic field effect was best seen at low temperature. The maximum yield of the polymerization product increases by 20% when the magnetic field of 1000 G was applied at the temperature of 20 °C.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). IV. Influence of solvent type

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C or 35°C in various solvents in the presence of stereoregular poly(methyl methacrylate) (PMMA). The occurrence of stereospecific replica polymerization appeared to be related to the capability of stereoassociation of isotactic and syndiotactic PMMA. The solvents can be roughly divided into three types. Type A solvents are polar solvents, which promote stereoassociation resulting in gelation and precipitation. Examples are dimethylformamide, dimethyl sulfoxide, and acetone. Type B solvents are nonpolar aromatic solvents like benzene and toluene, wherein stereoassociation is weaker but still leads to gelation. Type C solvents are very good solvents, in which stereoassociation does not occur. Chloroform and dichloromethane belong to this class. In solvents of type A as well as type B, polymerization in the presence of i-PMMA as a polymer matrix was syndiospecific. However, in the presence of s-PMMA as a polymer matrix the polymerization was isospecific only in type A solvents. The syndiotactic or isotactic triad contents of the polymer formed could be as high as ca. 90% at low conversions. In solvents of type C, polymerization in the presence of stereoregular PMMA proceeds according to a normal radical mechanism. Syndiotacticity was always less than 70%. Stereocomplexes formed in situ during replica polymerization were partly crystalline as detected by x-ray diffraction. The highest crystallinity was detected in those formed in type A solvents.     

ESR study on radical polymerization and its application to microemulsion systems

Well-resolved electron spin resonance (ESR) spectra of propagating radicals of vinyl and diene compounds were observed in a single scan by a conventional CW-ESR spectrometry without the aid of computer accumulation and the specially designed cavity and cells. Although solvents which could be used for ESR measurements were restricted to nonpolar solvents, such as benzene, toluene, and hexane, new information on dynamic behavior and reactivity of the propagating radicals in the radical polymerization of vinyl and diene compounds were obtained. Thus, values of propagation rate constants (k_p) for vinyl and diene compounds were determined by an ESR method. Some of the k_p values were in a fair agreement with those obtained by a pulsed laser polymerization (PLP) method. Furthermore, polymer chain effect on apparent k_p was clearly observed in the radical polymerization of macromonomers and in the microemulsion polymerization. In ESR measurement on inclusion polymerization system, important information on the origin of the 9-line spectrum observed in the radical polymerization of methacrylate propagating radicals was obtained.     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

The Origin of Magnetic Field Dependent Recombination in Alkylcobalamin Radical Pairs

Magnetic field effect studies of alkylcobalamin photolysis provide evidence for the formation of a reactive radical pair that is born in the singlet spin state. The radical pair recombination process that is responsible for the magnetic field dependence of the continuous-wave (CW) quantum yield is limited to the diffusive radical pair. Although the geminate radical pair of adenosylcob(III)alamin also undergoes magnetic field dependent recombination (A. M. Chagovetz and C. B. Grissom, J. Am. Chem. Soc. 115, 12152–12157, 1993), this process does not account for the magnetic field dependence of the CW quantum yield that is only observed in viscous solvents. Glycerol and ethylene glycol increase the microviscosity of the solution and thereby increase the lifetime of the spin-correlated diffusive radical pair. This enables magnetic field dependent recombination among spin-correlated diffusive radical pairs in the solvent cage. Magnetic field dependent recombination is not observed in the presence of nonviscosigenic alcohols such as isopropanol, thereby indicating the importance of the increased microviscosity of the medium. Paramagnetic radical scavengers that trap alkyl radicals that escape the solvent cage do not diminish the magnetic field effect on the CW quantum yield, thereby ruling out radical pair recombination among randomly diffusing radical pairs, as well as excluding the involvement of solvent-derived radicals. Magnetic field dependent recombination among alkylcobalamin radical pairs has been simulated by a semiclassical model of radical pair dynamics and recombination. These calculations support the existence of a singlet radical pair precursor.     

ESR and NMR studies of transients and micromechanisms occurring in initator systems for laser induced polymerization

The paper informs about the possibilities of studying the path-ways of photolytically induced radical formation and of the first steps of radical reactions by methods of magnetic resonance. The investigations were carried out on initiator systems for laser induced polymerization containing anthraquinone. triethylamine and erythrosine in various solvents. The applied methods were time-domain and steady-state cw-ESR, electron spin echo (ESE), ¹H NMR and stimulated nuclear polarization (SNP). The chemically induced polarization of electron spins and nuclear spins (CIDEP and CIDNP) and their relaxation was used as main source of information about the fast laser—induced reactions.     

丙烯腈在1-丁基-3-甲基咪唑氯化物中的聚合及其表征

以离子液体1-丁基-3-甲基咪唑氯化物([bmim]Cl)为溶剂,研究了丙烯腈(AN)的自由基均聚和共聚反应,通过红外光谱(FT-IR)和核磁共振(NMR)分析了聚合产物的化学结构,研究了第二单体丙烯酸甲酯(MA)的含量对聚合反应速率及转化率的影响.结果表明:以离子液体为溶剂所得聚丙烯腈(PAN)的化学结构与在常规溶剂中的一致,聚合产物的组成比与投料比接近,分子量随着AN含量的增加而增大,反应转化率随着AN含量的增加先增大后减小,所得PAN的分子量分布窄(<1.7)、分子量高.差示扫描量热分析(DSC)结果表明:MA含量低于2%时有利于环化反应的控制.     

Selective separation of lambdacyhalothrin by porous/magnetic molecularly imprinted polymers prepared by Pickering emulsion polymerization

Porous/magnetic molecularly imprinted polymers (PM‐MIPs) were prepared by Pickering emulsion polymerization. The reaction was carried out in an oil/water emulsion using magnetic halloysite nanotubes as the stabilizer instead of a toxic surfactant. In the oil phase, the imprinting process was conducted by radical polymerization of functional and cross‐linked monomers, and porogen chloroform generated steam under the high reaction temperature, which resulted in some pores decorated with easily accessible molecular binding sites within the as‐made PM‐MIPs. The characterization demonstrated that the PM‐MIPs were porous and magnetic inorganic–polymer composite microparticles with magnetic sensitivity (M_s = 0.7448 emu/g), thermal stability (below 473 K) and magnetic stability (over the pH range of 2.0–8.0). The PM‐MIPs were used as a sorbent for the selective binding of lambdacyhalothrin (LC) and rapidly separated under an external magnetic field. The Freundlich isotherm model gave a good fit to the experimental data. The adsorption kinetics of the PM‐MIPs was well described by pseudo‐second‐order kinetics, indicating that the chemical process could be the rate‐limiting step in the adsorption of LC. The selective recognition experiments exhibited the outstanding selective adsorption effect of the PM‐MIPs for target LC. Moreover, the PM‐MIPs regeneration without significant loss in adsorption capacity was demonstrated by at least four repeated cycles.     

Synthesis,characterization and stimuli-sensitive properties of novel linear and crosslinked polybetaines based on acrylic acid and ethyl 3-aminocrotonate

Novel linear and crosslinked polybetaines based on acrylic acid (AA) and ethyl 3-aminocrotonate (CRO) have been synthesized by a Michael addition reaction followed by radical polymerization. The polymerization of AA and CRO was carried out in bulk, water and organic solvents. The dependence of polymer yield on the molar ratio of monomers and water content was found. Primary attention was paid to linear and crosslinked polybetaines synthesized at equimolar ratio of monomers in the feed. The composition and structure of linear polybetaines was determined by elemental analysis, potentiometric titration, FTIR and NMR spectroscopy. The isoelectric points of linear and crosslinked polybetaines determined by electrophoresis, viscometry and swelling experiments corresponded to pH 2.0-2.2. The stimuli-sensitive properties of amphoteric gels were studied as a function of pH, ionic strength, water-organic solvent mixture, electric, and combined electric and magnetic fields. Appearance of pH gradient within the polyampholyte gel matrix under the externally imposed DC electric field was observed.     

Synthesis and microstructure of polymers from o-methacryloyloxybenzoic acid

The free radical polymerization of o-methacryloyloxybenzoic acid using acetone and benzene as solvents, in the interval 30–120°C, is investigated. The polymerization in benzene has a precipitant character. However, when acetone is used as solvent, at reaction temperatures higher than 60–70°C, the polymerization deviates from the classic free radical mechanism and, beside the addition of monomer molecules to growing chain ends, the release of salicylic acid and the formation of cyclic anhydride structures of glutaric type in the main chain has been detected. The microstructure of polymers obtained has also been studied by the transformation into the corresponding poly(methyl methacrylate)s.     

Polymerizable tautomers. VI. Solvent effects on polymerization and copolymerization of ethyl 4-methyl-3-oxo-4-pentenoate

The radical polymerization of ethyl 4-methyl-3-oxo-4-pentenoate (EMAA) was investigated at 60°C in benzene and acetonitrile. In both solvents, the kinetic results disagreed with the conventional model of radical polymerization. A remarkable solvent effect on monomer reactivity ratio was observed for the copolymerization of EMAA and styrene. Regression analysis of the monomer reactivity ratio with the solvatochromic parameters gives a good linear relationship, taking into account polarity and hydrogen-bond donating acidity of the solvent as the major factors.