Pure hydrocarbon sorption properties of poly(1-trimethylsilyl-1-propyne) (PTMSP), poly(1-phenyl-1-propyne) (PPP), and PTMSP/PPP blends

Propane and n-butane sorption in blends of poly(1-trimethylsilyl-1-propyne) (PTMSP) and poly(1-phenyl-1-propyne) (PPP) have been determined. Solubilities of propane and n-butane increased as the PTMSP content in the blends increased. This result is consistent with the higher free volume of PTMSP-rich blends and the better thermodynamic compatibility between PTMSP and these hydrocarbons. Propane and n-butane sorption isotherms were well described by the dual-mode model for sorption in glassy polymers. PTMSP/PPP blends are strongly phase-separated, heterogeneous materials. A noninteracting domain model developed for sorption in phase-separated glassy polymer blends suggests that sorption in the Henry's law regions (i.e., the equilibrium, dense phase of the blends) is consistent with the model. However, Langmuir capacity parameters in the blends are lower than predicted from the domain model, suggesting that the amount of nonequilibrium excess free volume associated with the Langmuir sites depends on blend composition. © 1996 John Wiley & Sons, Inc.     

Polymer characterization and gas permeability of poly(1-trimethylsilyl-1-propyne) [PTMSP], poly(1-phenyl-1-propyne) [PPP], and PTMSP/PPP blends

Pure gas and hydrocarbon vapor transport properties of blends of two glassy, polyacetylene-based polymers, poly(1-trimethylsilyl-1-propyne) [PTMSP] and poly(1-phenyl-1-propyne) [PPP], have been determined. Solid-state CP/MAS NMR proton rotating frame relaxation times were determined in the pure polymers and the blends. NMR studies show that PTMSP and PPP form strongly phase-separated blends. The permeabilities of the pure polymers and each blend were determined with hydrogen, nitrogen, oxygen, carbon dioxide, and n-butane. PTMSP exhibits unusual gas and vapor transport properties which result from its extremely high free volume. PTMSP is more permeable to large organic vapors, such as n-butane, than to small, permanent gases, such as hydrogen. PPP exhibits gas permeation characteristics of conventional low free volume glassy polymers; PPP is more permeable to hydrogen than to n-butane. In PTMSP/PPP blends, both n-butane permeability and n-butane/hydrogen selectivity increase as the PTMSP content of the blends increases. © 1996 John Wiley & Sons, Inc.     

Long-term permeation properties of poly(1-trimethylsilyl-1-propyne) membranes in hydrocarbon—Vapor environment

Poly(1-trimethylsilyl-1-propyne) (PTMSP), a high free-volume glassy di-substituted polyacetylene, has the highest gas permeabilities of all known polymers. The high gas permeabilities in PTMSP result from its very high excess free volume and connectivity of free volume elements. Permeability coefficients of permanent gases in PTMSP decrease dramatically over time due to loss of excess free volume. The effects of aging on gas permeability and selectivity of PTMSP membranes continuously exposed to a 2 mol % n-butane/98 mol % hydrogen mixture over a period of 47 days are reported. The permeation properties of PTMSP membranes are quite stable when the polymer is continuously exposed to a gas mixture containing a highly sorbing organic vapor such af n-butane. The n-butane/hydrogen selectivity was essentially constant for the 47-day test period at a value of 29, or 88% of the initial value of the as-cast film of 33. Condensable gases such as n-butane may serve as a “filler” in the nonequilibrium free volume of the polymer, thereby preserving the high level of excess free volume. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1483–1490, 1997     

Solubility,diffusivity, and mobility of n-pentane and ethanol in poly(1-trimethylsilyl-1-propyne)

The diffusion coefficient of ethanol and of n-pentane in PTMSP, at 27°C, was measured as a function of concentration up to a penetrant content of about 12% by weight, for polymer samples obtained through different processes; differential sorptions and desorptions with vapor phases were considered. In the case of ethanol a nonmonotonous behavior was observed for the diffusivity, while in the case of n-pentane the same property was found to monotonously decrease with increasing the penetrant content. The sorption isotherms were also reported, indicating that n-pentane exhibits a typical dual mode behavior, while ethanol follows an unusual s-shape curve. The chemical potential of the dissolved penetrants, calculated directly from the isotherms, shows the very different importance of the energetic interactions of the two penetrants with the polymer units. In spite of the remarkably different concentration dependencies observed for both solubility and diffusivity of the two penetrants, the mobility factors are in both cases monotonously decreasing with the penetrant concentration, and follow very similar trends. The significant differences observed for the concentration dependence of the diffusion coefficients are, thus, associated to the thermodynamic contributions, which are very different for n-pentane and ethanol. Different polymeric films, obtained through different solvent evaporation processes, show quite different solubility, diffusivity and mobility for both ethanol and n-pentane. On the other hand, the ratio between the mobility of the two penetrants as well as the slope of mobility as function of the concentration remains the same for all the different samples inspected. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2245–2258, 1997     

Transport of organic vapors through poly(1-trimethylsilyl-1-propyne)

Poly(1-trimethylsilyl-1-propyne) [PTMSP], a high-free-volume glassy polymer, has the highest gas permeability of any known synthetic polymer. In contrast to conventional, low-free-volume, glassy polymers, PTMSP is more permeable to large, condensable organic vapors than to permanent gases. The organic-vapor/permanent-gas selectivity of PTMSP based on pure gas measurements is low. In organic-vapor/permanent-gas mixtures, however, the selectivity of PTMSP is much higher because the permeability of the permanent gas is reduced dramatically by the presence of the organic vapor. For example, in n-butane/methane mixtures, as little as 2 mol% n-butane (relative n-butane pressure 0.16) lowers the methane permeability 10-fold from the pure methane permeability. The result is that PTMSP shows a mixed-gas n-butane/methane selectivity of 30. This selectivity is the highest ever observed for this mixture and is completely unexpected for a glassy polymer. In addition, the gas mixture n-butane permeability of PTMSP is considerably higher than that of any known polymer, including polydimethylsiloxane, the most vapor-permeable rubber known. PTMSP also shows high mixed-gas selectivities and vapor permeabilities for the separation of chlorofluorocarbons from nitrogen. The unusual vapor permeation properties of PTMSP result from its very high free volume - more than 20% of the total volume of the material. The free volume elements appear to be connected, forming the equivalent of a finely microporous material. The large amount of condensable organic vapor sorbed into this finely porous structure causes partial blocking of the small free-volume elements, reducing the permeabilities of the noncondensable permanent gases from their pure gas values.     

Investigations on the peculiar permeation properties of volatile organic compounds and permanent gases through PTMSP

In contrast to common glassy polymers, poly(1-trimethylsilyl-1-propyne) (PTMSP), a high free volume glassy polymer, shows a preferable permeation of large condensable organic vapors in comparison to permanent gases. In order to investigate this phenomenon, a systematic permeability study over a large activity range has been performed on PTMSP with three types of volatile organic compounds (VOCs) as diffusing probes: toluene, dimethylketone and dichloromethane. PTMSP was synthesized with different catalytic systems (Nb or Ta based) able to induce controlled sub-molecular cis–trans structures. Whereas dimethylketone and dichloromethane permeability can be correctly described by a classical dual-mode equation, a peculiar bell shaped pattern was obtained for toluene, with a minimum permeability located at an activity value around a=0.3–0.4. In that case, only a dual-mode expression taking into account a concentration dependent diffusion coefficient can account for the results.

On the other hand some apparent conflicting data recorded from PTMSP brand new films were related to the microstructure of the polymer main chain thanks to ¹³C NMR spectroscopy analysis showing importance of cis- and trans-forms of the main chain of PTMSP. cis-Structure is more flexible and can be responsible for the creation of a higher density physical network (HDN) in polymeric matrix; conversely, trans-structure is more rigid and can provide lower density physical network (LDN). The higher permeability recorded for several probes through PTMSP synthesized with TaCl₅/Al(i-Bu)₃ catalytic system compared to those of NbCl₅ based polymer can be explained by the geometric difference of the macromolecule networks.     

Facilitated transport of molecular oxygen in cobaltporphyrin/poly(1-trimethylsilyl-1-propyne) membrane

The combination membrane of poly(1-trimethylsilyl-1-propyne) with enormously high permeability and poly(vinylimidazole)-bound porphinatocobalt with selective oxygenbinding ability was prepared. Oxygen transport through the membrane was facilitated in terms of oxygen transport via the latter domain as a fixed oxygen-carrier, and this oxygen permeability maintained for a month.     

Metallation of poly(1-trimethylsilyl-1-prop-1-yne) and poly(vinyltrimethylsilane) with superbases

The pathway and degree of metallation of polymers were studied depending on the the conditions (temperature, concentration, nature, and component ratio) of metallation of poly(1-trimethylsilylprop-1-yne) (PTMSP) and poly(vinyltrimethylsilane) (PVTMS) by superbases, viz., BuⁿLi and Bu^sLi, in combination with potassium tert-pentyl oxide (Pe^tOK). For the BuⁿLi—Pe^tOK system (1 : 3), the yield of modified PTMSP reached 90%. In the case of PTMSP, only the Me groups at the double bonds and at the Si atoms undergo metallation, whereas only the Me groups at the Si atoms are metallated in PVTMS. The kinetics of metallation with the BuⁿLi—Pe^tOK system was studied.     

Chromatographic and adsorption properties of the mixed stationary phase poly(1-trimethylsilyl-1-propyne)/poly(1-phenyl-1-propyne)

Adsorption and chromatographic properties of the mixed stationary phase poly-(1-trimethylsilyl-1-propyne)/poly(1-phenyl-1-propyne) (PTMSP/PPP) composed as 97: 3 by weight have been investigated by methods of low-temperature nitrogen adsorption and gas chromatography on packed columns. The resultant phase has uniform mesoporous structure. The chromatographic properties of the mixed phase are significantly different from the properties of the original porous polymers PTMSP and PPP. The adsorbent obtained by modifying Chromosorb P NAW with a mixture of polymers provides the selective separation of chlorosubstituted, saturated, and aromatic hydrocarbons.     

The effect of benzonitrile on the hydrogenation of phenylacetylene and 1-phenyl-1-propyne over a palladium/carbon catalyst

Benzonitrile reduces the rate of alkyne hydrogenation. However, it enhances the rate of styrene hydrogenation while reducing the rate of -methylstyrene hydrogenation.     

Gas permeability and stability of poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) membranes

A significant reduction in the gas permeability of the poly(1-trimethylsilyl-1-propyne) (PMSP) membrane was investigated in terms of the membrane thickness and the storage environment. The effects of physical aging were observed with thinner membranes and under vacuum conditions compared with storage in air. The decrease in the permeability coefficient was dependent on the decrease in the hole saturation constant of Langmuir adsorption (C'_H), which is related to the volume of the microvoids. Physical aging in the PMSP membrane affected not only the glassy domain but also the rubbery one. To stabilize the permeability of the PMSP membrane, a poly(1-trimethylsilyl-1-propyne-co-1-phenyl-1-propyne) [poly(TMSP-co-PP)] membrane was prepared. Poly(TMSP-co-PP) has the same unit of poly(1-phenyl-1-propyne), which membrane has stable permeability. The poly(TMSP-co-PP) with less than 20 mol % PP content was estimated to be a random copolymer based on theoretical gas permeation analysis. In the poly(TMSP-co-PP) membrane, the relation between the PP content and C'_H was similar to the relation between the PP content and the gas permeability. The stability of the permeability was dependent on the PP content. The poly(TMSP-co-PP) membrane containing 10 mol % PP had both high permeability and good stability under some of the aging conditions performed in this work. © 1995 John Wiley & Sons, Inc.     

Dilation of poly[1-(trimethylsilyl)-1-propyne] during sorption of n-nonane

The linear expansion and contraction in the principal planar directions of poly[1-(trimethylsilyl)-1-propyne] film were measured concurrently with the sorption of n-nonane at 35°C. After the first sorption cycle, in which the polymer exhibited markedly nonisotropic volumetric dilation, the polymer expanded and contracted reproducibly during subsequent multiple sorption and desorption cycles. These reversible dilation isotherms were reproducible from sample to sample. The fractional change in length was identical in arbitrarily selected, orthogonal directions in the plane of the film, suggesting that the expansion and dilation of the sample are isotropic. When plotted versus the activity of n-nonane, the linear expansions in the plane of the film are slightly concave to the activity axis, reaching levels over 10% at the highest activities. The experimental partial specific volume of the polymer is near its pure component value but that of the penetrant is much less than its pure component value. Moreover, the magnitude of dilation observed is described rather closely by the dilation which would result solely from the Henry's law portion of sorption, assuming zero volume-change of mixing. These results are consistent with the explicit notions of “hole-filling” associated with the Langmuir mode in the dual-mode model. © 1993 John Wiley & Sons, Inc.     

Kinetics of weight loss and chain scission in the thermooxidative degradation of poly[1-(trimethylsilyl)-1-propyne] films

The kinetic model of thermooxidative degradation in air, proposed to be valid for poly(2-hexyne) in predicting the lifetime of substituted polyacetylenes, was applied to poly[1-(trimethylsilyl)-1-propyne] films, with the differences in the oxidative behavior of both polyacetylenes noted. The effect of the molecular weight of the sample on the degradation process was analyzed. Kinetics of weight loss and chain scission were modeled, and the kinetic parameters were calculated. Also, the evolution of weight loss was related to the chain scission. The proposed model was validated with data reported in the literature. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4309–4317, 1999     

Miscibility and ferroelectric behavior in blends of poly(vinylidene fluoride/trifluoroethylene) and poly(vinyl acetate)

The blend system containing a poly(vinylidene fluoride/trifluoroethylene) [P(VDF/TrFE)] copolymer (68/32 mol %) and poly(vinyl acetate) (PVAc) was miscible from the results of differential scanning calorimetry (DSC) studies that exhibit the presence of a single, composition‐dependent glass transition temperature (T_g) and a strong melting point depression for the semicrystalline P(VDF/TrFE) component. However, differences between the DSC and dielectric measurements, which showed a separate P(VDF/TrFE) T_g peak, suggests that the P(VDF/TrFE)/PVAc blends are actually partially miscible. Because of the lower dielectric constant of PVAc and the reduced sample crystallinity caused by the addition of PVAc, both the dielectric constant and the remanent polarization of the copolymer blends decrease with increasing PVAc content. The presence of a small amount of PVAc stabilized the anomalous ferroelectric behavior of ice–water‐quenched P(VDF/TrFE), and the blend portrayed normal polarization reversal behavior after adding only 1 wt % PVAc. The piezoelectric response suggests small changes with an increasing number of poling cycles. It is believed that PVAc affects the D‐E hysteresis behavior at the interface between crystalline and amorphous phases, although much work remains to be done to confirm this hypothesis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 927–935, 2003     

GAS PERMEABILITY OF COPOLY(1-TRIMETHYL-SILYL-1-PROPYNE-PENTAMETHYL-DISILYL-1-PROPYNE) MEMBRANE

The permeability of copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (0_2, N_2, CO_2, H_2, D_2, He, At, CH_4, C_2H_4, C_2H_6, C_3H_6 and C_3H_8) was examined. The basic laws of solution and diffusion of the gases in the membrane were expounded preliminarily. It was found that a linear relationship between logarithm of diffusion coefficient (D) and critical molar volume (V_c) of the gases. The permeation characteristics of the gases in the copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane was also discussed.     

Interactions and prediction of phase diagrams in ternary blends comprising poly(vinyl acetate), poly(vinyl p‐phenol), and poly(methyl methacrylate)

This study investigated and discovered a new miscible ternary blend system comprising three amorphous polymers: poly(vinyl acetate) (PVAc), poly(vinyl p‐phenol) (PVPh), and poly(methyl methacrylate) (PMMA) using thermal analysis and optical and scanning electron microscopies. The ternary compositions are largely miscible except for a small region of borderline ternary miscibility near the side, where the binary blends of PVAc/PMMA are originally of a borderline miscibility with broad T_g. In addition to the discovering miscibility in a new ternary blend, another objective of this study was to investigate whether the introduction of a third polymer component (PVPh) with hydrogen bonding capacity might disrupt or enhance the metastable miscibility between PVAc and PMMA. The PVPh component does not seem to exert any “bridging effect” to bring the mixture of PVAc and PMMA to a better state of miscibility; neither does the Δχ effect seem to disrupt the borderline miscible PVAc/PMMA blend into a phase‐separated system by introducing PVPh. Apparently, the ternary is able to remain in as a miscible state as the binary systems owing to the fact that PVPh is capable of maintaining roughly equal H‐bonding interactions with either PVAc or PMMA in the ternary mixtures to maintain balanced interactions among the ternary mixtures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1147–1160, 2006     

Thermal oxidation of blends of poly(ethylene oxide) and poly(methyl methacrylate)

Thermal oxidation of poly(ethylene oxide) (PEO) and its blends with poly(methyl methacrylate) (PMMA) were studied using oxygen uptake measurements. The rates of oxidation and maximum oxygen uptake contents were reduced as the content of PMMA was increased in the blends. The results were indicative of a stabilizing effect by PMMA on the oxidation of PEO. The oxidation reaction at 140°C was stopped at various stages and PMMA was separated from PEO and its molecular weights were measured by gel permeation chromatography (GPC). The decrease in the number-average molecular weight of PMMA was larger as the content of PEO increased in the blends. The visual appearance of the films suggested that phase separation did not occur after thermal oxidation. The activation energy for the rates of oxidation in the blends was slightly increased compared to pure PEO. © 1992 John Wiley & Sons, Inc.     

Miscible blends of poly(vinyl phenyl ketone) and poly(4‐vinyl phenol)

An analysis by differential scanning calorimetry, modulated differential scanning calorimetry, and Fourier transform infrared spectroscopy (FTIR) indicates that blends of poly(vinyl phenyl ketone) (PVPhK) and poly(4‐vinyl phenol) (P4VPh) are miscible at ambient temperature. Miscibility, ascertained, is supported by the existence of a single glass transition for each composition of the PVPhK/P4VPh blends. The FTIR spectroscopy analysis demonstrates the formation of hydrogen bonds between carbonyl groups of PVPhK and hydroxyl groups of P4VPh. This specific interaction has a crucial role on the miscibility behavior of PVPhK/P4VPh blends. The evolution of the glass transition of the PVPhK, P4VPh, and its blends as a function of mixture composition shows negative deviations with to respect to the ideal mixing rule, and both Fox and Gordon–Taylor equations predict this behavior successfully. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2404–2411, 2006