Densely grafting copolymers of ethyl cellulose through atom transfer radical polymerization

Densely grafting copolymers of ethyl cellulose with polystyrene and poly(methyl methacrylate) were synthesized through atom transfer radical polymerization (ATRP). First, the residual hydroxyl groups on the ethyl cellulose reacted with 2‐bromoisobutyrylbromide to yield 2‐bromoisobutyryloxy groups, known to be an efficient initiator for ATRP. Subsequently, the functional ethyl cellulose was used as a macroinitiator in the ATRP of methyl methacrylate and styrene in toluene in conjunction with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst system. The molecular weight of the graft copolymers increased without any trace of the macroinitiator, and the polydispersity was narrow. The molecular weight of the side chains increased with the monomer conversion. A kinetic study indicated that the polymerization was first‐order. The morphology of the densely grafted copolymer in solution was characterized through laser light scattering. The individual densely grafted copolymer molecules were observed through atomic force microscopy, which confirmed the synthesis of the densely grafted copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4099–4108, 2005     

Synthesis and characterization of near‐monodisperse electron acceptor homopolymers of 2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate

Homopolymers of 2‐(trimethylsiloxy)ethyl methacrylate of degrees of polymerization from 5 to 50 were synthesized by group transfer polymerization in tetrahydrofuran (THF) using 1‐methoxy‐1‐(trimethylsiloxy)‐2‐methyl propene as the initiator and tetrabutylammonium bibenzoate as the catalyst. These polymers were first converted to poly[2‐(hydroxy)ethyl methacrylate]s by removal of the trimethylsilyl‐protecting groups by acidic hydrolysis, and subsequently transformed to poly{2‐[(3,5‐dinitrobenzoyl)oxy]ethyl methacrylate}s by reaction with 3,5‐dinitrobenzoyl chloride in the presence of triethylamine. Gel permeation chromatography in THF and proton nuclear magnetic resonance (¹H NMR) spectroscopy in CDCl₃ and d₆ dimethyl sulfoxide were used to characterize the polymers in terms of their molecular weight and composition. The molecular weights were found to be close to the values expected from the polymerization stoichiometry and the molecular weight distributions were narrow, with polydispersity indices around 1.1. The hydrolysis and reesterification steps were found to be almost quantitative for all polymers. Differential scanning calorimetry and thermal gravimetric analysis were also employed to measure the glass transition temperatures (T_g 's) and decomposition temperatures, which were determined to be approximately 80 and 320 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1457–1465, 2000     

Reversible addition‐fragmentation chain transfer polymerization of vinyl acetate under high pressure

In this work, high molecular weight polyvinyl acetate (PVAc) (M_n,GPC = 123,000 g/mol, M_w/M_n = 1.28) was synthesized by reversible addition‐fragmentation chain transfer polymerization (RAFT) under high pressure (5 kbar), using benzoyl peroxide and N,N‐dimethylaniline as initiator mediated by (S)‐2‐(ethyl propionate)‐(O‐ethyl xanthate) (X1) at 35 °C. Polymerization kinetic study with RAFT agent showed pseudo‐first order kinetics. Additionally, the polymerization rate of VAc under high pressure increased greatly than that under atmospheric pressure. The “living” feature of the resultant PVAc was confirmed by ¹H NMR spectroscopy and chain extension experiments. Well‐defined PVAc with high molecular weight and narrow molecular weight distribution can be obtained relatively fast by using RAFT polymerization at 5 kbar. © 2015 Wiley Periodicals, Inc. J. Polym. Sci. Part A: Polym. Chem. 2015 , 53, 1430–1436     

Anodic perfluoroalkylation of the enol acetate of ethyl acetoacetate

Electrochemical perfluoroalkylation of the enol acetate of ethyl acetoacetate was studied in the conditions of the Kolbe reaction. The yields of alkylation products depend on the competing adsorption of the enol acetate, the solvent, and perfluorocarboxylates on the surface of a platinum electrode.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2948–2951, December, 1996.     

Controlled/living polymerization of MMA promoted by heterogeneous initiation system (EPN‐X–CuX–bpy)

The polymerization of methyl methacrylate (MMA) promoted by heterogeneous initiation system (ethyl‐2‐halopropionate (EPN‐X)–CuX–2,2′‐bipyridyl (bpy), where X = Br or Cl) is studied in detail. The results show that ethyl‐2‐bromopropionate (EPN‐Br) is an efficient initiator as expected, and that CuCl–bpy, instead of CuBr–bpy, is a better catalyst for the controlled polymerization of MMA. The solvents with a high value of dielectric constant (ε) will lead to fast initiation and narrow molecular weight distribution (MWD). As a result, the controlled, living polymerization of MMA with EPN‐Br–CuCl–bpy can be got in ethyl acetate (EAc) at 100°C and in acetonitrile at 80°C. All results suggest that the initiation reaction is a controlling step in the controlled polymerization of MMA. The relationship between the UV spectra of CuCl–bpy and the performances of the polymerization in EAc or acetonitrile suggest that the formation of bis‐bpy complex, [Cubpy₂]X⁻, will lead to fast initiation and good control of the polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1255–1263, 1999     

添加丙酮与乙酸乙酯对生物油稳定性的影响

为了探究丙酮与乙酸乙酯对生物油储存特性的影响,将不同质量分数（3%、6%、9%、12%、15%）的丙酮和乙酸乙酯分别加入到生物油中,考察各组生物油理化特性随储存时间的变化。结果表明,添加丙酮和乙酸乙酯降低了生物油的含水率,且乙酸乙酯对生物油水分的降低效果优于丙酮。储存35 d后,15%乙酸乙酯组生物油的含水率为13.41%,比空白组（16.32%）降低了17.8%。加入添加剂后各组生物油的运动黏度均显著下降,与乙酸乙酯相比,丙酮对运动黏度影响较大。随着添加剂添加比例的增加,生物油运动黏度降低。储存35 d后,添加丙酮质量分数为3%、6%、9%、12%、15%的实验组生物油的运动黏度比空白组分别降低了37.20%、57.78%、71.92%、79.79%、84.67%。两种添加剂均能使生物油的pH值略微增大。红外光谱分析和气相色谱质谱联用分析显示,丙酮和乙酸乙酯抑制了生物油的老化反应。     

Controlled Anionic Synthesis of Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate]

Poly[2‐(3‐nitrocarbazolyl)ethyl methacrylate] (poly(NCzMA)) with controlled molecular weight and narrow molecular weight distribution was successfully synthesized using (methyl methacryloyl)potassium (MMA) as a weak initiator in the presence of diethylzinc (Et₂Zn) in THF at –78°C. Et₂Zn acted both as an additive for the coordination with enolate anion and nitro group and as a scavenger to remove impurities. Block copolymers PMMA‐block‐poly(NCzMA)‐block‐PMMA and poly(NCzMA)‐block‐PS‐block‐poly(NCz‐MA), were also synthesized quantitatively (PMMA: poly(methyl methacrylate), PS: polystyrene). The results indicate that Et₂Zn can be used to synthesize the polymers of solid, nitro group‐containing methacrylate monomers by anionic polymerization in THF.     

Living anionic homo- and block copolymerization of 2-(tert-butylamino)ethyl methacrylate

Anionic polymerization of 2-(tert-butylamino)ethyl methacrylate (tBAEMA), which bears an unprotected secondary amine moiety, has been investigated in THF at −78°C. The presence of lithium chloride has been shown to be desirable to afford narrow molecular weight distribution as well as a good agreement between theoretical and observed molecular weight. The living character of the polymerization has also been demonstrated, and the synthesis of block copolymers carried out successfully. They have been analyzed by SEC by adding a mixture of secondary and tertiary amines to the eluent (THF) so as to avoid any polymer adsorption during elution. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2035–2040, 1997     

Atom transfer radical polymerization of styrene using the novel initiator ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate

The atom transfer radical polymerizations (ATRPs) of styrene initiated by a novel initiator, ethyl 2‐N,N‐(diethylamino)dithiocarbamoyl‐butyrate (EDDCB), in both bulk and solution were successfully carried out in the presence of copper(I) bromide (CuBr) and N,N,N′,N″,N″‐pentamethyldiethylenetriamine at 115 °C. The polymerization rate was first‐order with respect to the monomer concentration, and the molecular weights of the obtained polymers increased linearly with the monomer conversions with very narrow molecular weight distributions (as low as 1.17) up to higher conversions in both bulk and solution. The polymerization rate was influenced by various solvents in different degrees in the order of cyclohexanone > dimethylformamide > toluene. The molecular weight distributions of the produced polymers in cyclohexanone were higher than those in dimethylformamide and toluene. The results of ¹H NMR analysis and chain extension confirmed that well‐defined polystyrene bearing a photo‐labile N,N‐(diethylamino)dithiocarbamoyl group was obtained via ATRP of styrene with EDDCB as an initiator. The polymerization mechanism for this novel initiation system is a common ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 32–41, 2006     

Preferential solvation of indomethacin and naproxen in ethyl acetate + ethanol mixtures according to the IKBI method

The preferential solvation parameters of indomethacin and naproxen in ethyl acetate + ethanol mixtures are derived from their thermodynamic properties by using the inverse Kirkwood–Buff integrals method. It is found that both drugs are sensitive to solvation effects, so the preferential solvation parameter, δx_EA,D, is negative in ethanol-rich and ethyl acetate-rich mixtures but positive in compositions from 0.36 to 0.71 in mole fraction of ethyl acetate. It is conjecturable that in ethanol-rich mixtures, the acidic interaction of ethanol on basic sites of the analgesics plays a relevant role in the solvation. The more solvation by ethyl acetate in mixtures of similar co-solvent compositions could be due to polarity effects. Finally, the slight preference of these compounds for ethanol in ethyl acetate-rich mixtures could be explained as the common participation of basic sites in both solvents and the acidic site of ethanol. Nevertheless, the specific solute–solvent interactions remain unclear.     

添加乙酸乙酯对生物油稳定性的影响

以稻草秸秆快速热裂解生物油为样品,选取乙酸乙酯作为添加剂,按不同质量分数(分别为1%、6%、11%、16%和21%)添加到生物油中,考察原始生物油(空白组)及乙酸乙酯组生物油理化特性随贮存时间的变化规律。结果表明,随着乙酸乙酯添加质量分数增大,各乙酸乙酯组(1%、6%、11%、16%和21%)生物油最终pH值比空白组分别提高0.66%、2.33%、3.65%、4.32%和6.31%;最终含水率比空白组分别降低10.90%、20.17%、28.19%、30.27%和35.10%;最终运动黏度比空白组分别降低13.69%、39.08%、57.99%、66.00%和73.58%。FT-IR和GC-MS分析结果表明,添加乙酸乙酯能抑制生物油老化反应。此外,GC-MS分析结果还证实乙酸乙酯可以减少生物油内有机酸含量。     

Hydrogenation of ethyl acetate over supported rhenium catalysts

Re/Sibunite is a more active and selective catalyst for hydrogenation of ethyl acetate to ethanol under elevated temperatures and hydrogen pressures than Re/θ-Al₂O₃ and Re/γ-Al₂O₃. The activity of the catalyst is increased on replacing NH₄ReO₄ with HReO₄ and treatment of the support with a 13% solution of HNO₃. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1006–1008, May, 1999.     

Radical polymerization of ethyl acrylate with dead end polymerization conditions

The radical polymerization of ethyl acrylate (EA) with 4,4^′-azobis(4-cyanovaleric)acid as initiator was investigated in propionitrile at 363 K in order to obtain carboxy-telechelic oligo(ethyl acrylate). The results of functionality and molecular weights showed that a transfer reaction had occurred. A molecular weight study was performed in order to show the importance of transfer to solvent due to the high reactivity of the EA radical. Finally, the radical polymerization was investigated at very low temperature (253-273 K), using a redox system initiation. A behavior of dead end polymerization was observed but the activation energy of propagation for EA is still high and does not allow the synthesis of a telechelic oligomer.     

Atom transfer radical copolymerization of acrylonitrile and ethyl methacrylate at ambient temperature

Copolymerization of acrylonitrile (AN) and ethyl methacrylate (EMA) using copper‐based atom transfer radical polymerization (ATRP) at ambient temperature (30 °C) using various initiators has been investigated with the aim of achieving control over molecular weight distribution. The effect of variation of concentration of the initiator, ligand, catalyst, and temperature on the molecular weight distribution and kinetics were investigated. No polymerization at ambient temperature was observed with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) ligand. The rate of polymerization exhibited 0.86 order dependence with respect to 2‐bromopropionitrile (BPN) initiator. The first‐order kinetics was observed using BPN as initiator, while curvature in first‐order kinetic plot was obtained for ethyl 2‐bromoisobutyrate (EBiB) and methyl 2‐bromopropionate (MBP), indicating that termination was taking place. Successful polymerization was also achieved with catalyst concentrations of 25 and 10% relative to initiator without loss of control over polymerization. The optimum [bpy]₀/[CuBr]₀ molar ratio for the copolymerization of AN and EMA through ATRP was found to be 3/1. For three different in‐feed ratios, the variation of copolymer composition (F_AN) with conversion indicated toward the synthesis of copolymers having slight changes in composition with conversion. The high chain‐end functionality of the synthesized AN‐EMA copolymers was verified by further chain extension with methyl acrylate and styrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1975–1984, 2006     

Nitroxide-mediated photo-controlled/living radical polymerization of ethyl acrylate

The nitroxide-mediated photo-controlled/living radical polymerization of ethyl acrylate was attained using (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) as the initiator, 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl as the mediator, and (4-tert-butylphenyl)diphenylsulfonium triflate as the photo-acid generator. The photopolymerization was performed in acetonitrile at room temperature by irradiation with a high-pressure mercury lamp. The molecular weight distribution of the resulting polymer decreased as the monomer concentration decreased. It was confirmed that the polymerization was controlled on the basis of the linear correlations for the first-order time-conversion plots and the plots of the molecular weight vs. the reciprocal of the initial concentration of the initiator, although the conversion–molecular weight plots did not show a completely linear correlation. The block copolymerization with methyl methacrylate accompanied by no deactivation of the growing polymer chain end supported the livingness of the polymerization.     

Vinyl acetate polymerization by ionizing radiation

For this work an irradiation system to be used in the polymerization of the vinyl acetate in methylethylketone and in ethyl alcohol solution using the gamma radiation as initiator was projected and built. The molecular weights of the polymers obtained by irradiation with gamma rays in methylethylketone and in ethyl alcohol solution were 33,000 and 44,000 g/mol, respectively. From the characterization by infrared spectroscopy it was possible to verify that the polymers obtained in two studied cases actually correspond to poly(vinyl acetate).     

Photo-controlled/living radical polymerization of 2-(dimethylamino)ethyl methacrylate using 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl as a mediator

The photo-controlled/living radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) was attained using 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl as the mediator and (2RS,2′RS)-azobis(4-methoxy-2,4-dimethylvaleronitrile) (r-AMDV) as the initiator. The bulk polymerization of DMAEMA produced a polymer with a comparatively narrow molecular weight distribution below 1.6. The first-order time conversion plots showed a linear increase. The molecular weight of the resulting polymer also increased with an increase in the monomer conversion. The molecular weights of the resulting polymers were in good agreement with the theoretical molecular weights. A linear correlation was also obtained for the plots of the molecular weight vs. the reciprocal of the initial concentration of r-AMDV. The GPC analysis demonstrated the living nature of the polymerization based on the fact that the curves were shifted to the higher molecular weight side without deactivation as the conversion increased.     

Synthesis of poly(vinyl acetate)‐graft‐polystyrene by a combination of cobalt‐mediated radical polymerization and atom transfer radical polymerization

Vinyl acetate and vinyl chloroacetate were copolymerized in the presence of a bis(trifluoro‐2,4‐pentanedionato)cobalt(II) complex and 2,2′‐azobis(4‐methoxy‐2,4‐dimethylvaleronitrile) at 30 °C, forming a cobalt‐capped poly(vinyl acetate‐co‐vinyl chloroacetate). The addition of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy after a certain degree of copolymerization was reached afforded 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐terminated poly(vinyl acetate‐co‐vinyl chloroacetate) (PVOAc–MI; number‐average molecular weight = 31,000, weight‐average molecular weight/number‐average molecular weight = 1.24). A ¹H NMR study of the resulting PVOAc–MI revealed quantitative terminal 2,2,6,6‐tetramethyl‐1‐piperidinyloxy functionality and the presence of 5.5 mol % vinyl chloroacetate in the copolymer. The atom transfer radical polymerization (ATRP) of styrene (St) was studied with ethyl chloroacetate as a model initiator and five different Cu‐based catalysts. Catalysts with bis(2‐pyridylmethyl)octadecylamine (BPMODA) or tris(2‐pyridylmethyl)amine (TPMA) ligands provided the highest initiation efficiency and best control over the polymerization of St. The grafting‐from ATRP of St from PVOAc–MI catalyzed by copper complexes with BPMODA or TPMA ligands provided poly(vinyl acetate)‐graft‐polystyrene copolymers with relatively high polydispersity (>1.5) because of intermolecular coupling between growing polystyrene (PSt) grafts. After the hydrolysis of the graft copolymers, the cleaved PSt side chains had a monomodal molecular weight distribution with some tailing toward the lower number‐average molecular weight region because of termination. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 447–459, 2007     

Acidity function of methanesulfonic acid solutions in ethyl acetate

The acidity function of solutions of methanesulfonic acid (MSA) in ethyl acetate (EA) was measured by the indicator method at 25 °C in the 0.4—100% concentration range. Molecular complexes formed by MSA and EA show a higher ionizing activity than H₅O₂ ⁺ ions. The relative ionizing activity of the MSA·EA complexes and ion pairs formed by MSA and DMF was determined.     

Copolymerization of vinyl acetate with ethyl α-cyanocinnamate

Trisubstituted ethylene, ethyl α-cyanocinnamate, is readily copolymerized with vinyl acetate by a conventional radical initiator. Terminal, penultimate, and “complex” copolymerization models were applied by using the data of composition of the copolymers obtained in bulk and by copolymerization in benzene, ethyl acetate, and chloroform. The model based on the participation of the monomer complexes describes satisfactorily the deviation from the terminal copolymerization model. The proton NMR analyses of the monomer mixtures indicate that the interaction between the monomers leads to the formation of weak monomer complexes. Kinetic studies of the initial rate dependence on the total monomer concentration and monomer feed composition enabled us to evaluate the degree of participation of the free uncomplexed monomers and the monomer complex in the propagation reactions. The contribution of the complexed monomers in the propagation stages increases with the increase in total monomer concentration. The initial rate of the copolymerization is proportional to the square root of the initiator concentration, thus confirming the bimolecular termination of the macrochains. The rate constants of the addition reactions of the complex and free monomers were evaluated from the kinetic studies. The quantitative kinetic treatment provided information regarding the relative weight of the termination reaction and indicated that the termination in the system occurs predominantly by the cross-termination reaction between two growing polymer radicals with different kinds of monomer units at the ends. Additional information on the termination in this system was obtained from viscosity measurements.