A new synthetic route of 4,4′-hexafluoroisopropylidene-2,2-bis-(phthalic acid anhydride) and characterization of 4,4′-hexafluoroisopropylidene-2,2-bis-(phthalic acid anhydride)-containing polyimides

The title product 4,4′-hexafluoroisopropylidene-2,2-bis-(phthalic acid anhydride) was prepared from hexafluoroacetone and o-xylene as the starting materials by condensation, oxidation and dehydration three-step reaction sequence. It reacted with diamines in DMF or xylene to give polyimides by condensation polymerization. Thermal and viscosity analyses show that these polyimides have lower molecular weight but excellent thermal stability.     

Synthesis and properties of poly(ether imide)s based on a benzonorbornane bis(ether anhydride)

A novel bis(ether anhydride) monomer, 3,6‐bis(3,4‐dicarboxyphenoxy)benzonorbornane dianhydride, was synthesized from the nitro displacement of 4‐nitrophthalonitrile with 3,6‐dihydroxybenzonorbornane in the presence of potassium carbonate, followed by the alkaline hydrolysis of the intermediate bis(ether dinitrile) and the cyclodehydration of the resulting bis(ether diacid). A series of poly(ether imide)s bearing pendant norbornane groups were prepared from the bis(ether anhydride) with various aromatic diamines via a conventional two‐stage process that included ring‐opening polyaddition to form the poly(amic acid)s followed by thermal imidization to the poly(ether imide)s. The inherent viscosities of the poly(amic acid) precursors were 0.81–1.81 dL/g. The poly(ether imide) with m‐phenylenediamine as a diamine showed good organosolubility. Most of the cast poly(ether imide) films have had high tensile strengths and moduli. The glass‐transition temperatures of these poly(ether imide)s, except for those from rigid p‐phenylenediamine and benzidine, were recorded between 211 and 246 °C by differential scanning calorimetry. The softening temperatures of all the poly(ether imide) films stayed within 210–330 °C according to thermomechanical analysis. No polymers showed significant decomposition before 500 °C in a nitrogen or air atmosphere. A comparative study of the properties with the corresponding poly(ether imide)s without pendant substituents was also made. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1712–1725, 2002     

The conformational effect of form I helical poly(L-proline) and form II helical poly(L-proline) to the complex formation with helical poly(L-glutamic acid) through hydrogen bonding

The complex formation between helical poly-L-glutamic acid (PLGA) and helical poly-L-proline (PLP) was studied in a methanol-water (2 : 1) cosolvent and a propanol-water cosolvent (9 : 1). Reduced viscosity, circular dichroism, pH, and molar absorptivity were measured. The experimental results exhibit that the interpolymer complex was formed between helical PLGA and helical PLP through hydrogen bonding. When the complex was formed the unit mole ratio of PLGA : PLP(II) is 2 : 1 and PLGA : PLP(I) is 1.5 : 1, the ability of complex formation of PLP (II) with PLGA is better than that of PLP(I). On complexation the conformations of PLGA and PLP change and this change is more enhanced in the PLGA-PLP(II) than the PLGA-PLP(I) complex; its cause is studied. © 1993 John Wiley & Sons, Inc.     

Preparation and proton conductivity of poly(N‐methylbenzimidazole) doped with acid

To increase the solubility and film forming ability of polybenzimidazole (PBI), poly(N‐methylbenzimidazole) (PNMBI) with different degrees of methylation was synthesized. Chemical structure, degree of substitution, and solubility of PNMBI was studied. PNMBI is easier to be doped with acid than PBI. The basicity of PNMBI was improved with the introduction of methyl groups on the imidazole moiety. Effects of methylation degree, H₃PO₄ content and temperature on proton conductivity of PNMBI doped H₃PO₄ was studied. Proton conductivity of H₃PO₄ doped PNMBI‐1.2 membranes increases with increasing doping level. Temperature dependence of proton conductivity of H₃PO₄ doped PNMBI‐1.2 membranes follows the Arrhenius law. With an increase in the degree of substitution, proton conductivity of H₃PO₄ doped PNMBI decreases dramatically. The proton transport mechanism was also discussed. The proton conductivity of PNMBI/H₃PO₄ is mainly contributed by proton hopping or Grotthuss mechanism. Copyright © 2004 John Wiley & Sons, Ltd.     

Effects of polymer architecture and composition on the adhesion of poly(tetrafluoroethylene).

Poly(glycidyl methacrylate), PGMA, chains in linear and arborescent structures were incorporated onto surfaces of poly(tetrafluoroethylene), PTFE, films by hydrogen plasma and ozone treatment and atom transfer radical polymerization. The epoxide groups of the PGMA chains were further reacted with acetic acid (AAc), oxalic acid (XAc), allyl amine (AA), and ethylenediamine (EDN) to introduce hydroxyl and amine groups to the surfaces of the PTFE films. Surface characterizations performed by Fourier Transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the surface modification and the chemical structure. The PGMA chains in arborescent structures show a high effectiveness for the enhancement of the adhesion of PTFE films. The adhesion of PTFE films was also significantly enhanced by ring-opening reactions of the PGMA epoxide groups with acetic acid and amine compounds. A high value of 9.5 N cm(-1) in the optimum 180 degrees peel strength test was observed with PTFE/copper assemblies.     

Properties and morphology of poly(L-lactide). II. Hydrolysis in alkaline solution

Hydrolysis of poly(L -lactide) (PLLA) films in 0.01N NaOH at 37°C was investigated by gel permeation chromatography, differential scanning calorimetry, scanning electron microscopy, and polarizing optical microscopy. The change in molecular weight distribution and surface morphology of PLLA films during hydrolysis revealed that PLLA film hydrolysis in dilute alkaline solution proceeded mainly via the surface erosion mechanism. An insignificant dependence of the rate of weight loss per unit surface area on the PLLA film thickness also supported this conclusion. Etching of the outside of PLLA spherulites resulted in preferred hydrolysis of PLLA chains in the amorphous region. The disorientation of lamella and inhomogeneous erosion in the spherulites implied that hydrolysis of PLLA chains occurred predominantly in the amorphous region between the crystalline regions in the spherulites. The rate of weight loss per unit surface area decreased linearly with the increase in the initial crystallinity of PLLA film, while the radius of spherulites had practically no significant effect on the hydrolysis of PLLA film. The specific low molecular weight of PLLA chains produced by hydrolysis increased with the rise in annealing temperature of the PLLA film, suggesting that the PLLA chains released were the component of one fold in the crystalline region. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 59–66, 1998     

Organic solvent dispersion of poly(3,4‐ethylenedioxythiophene) with the use of polymeric ionic liquid

A nonaqueous dispersion of poly(3,4‐ethylenedioxythiophene) (PEDOT) was prepared with the use of polymeric ionic liquid (PIL) as a polymerization template and phase transfer medium. A detailed investigation was performed to understand the role of PIL in the course of polymerization and phase transfer reaction. On the basis of our findings from X‐ray photoelectric spectroscopy (XPS), we propose a mechanism by which the PIL leads to the nanostructured PEDOT colloids in various organic solvents and thus facilitating smoother surface morphologies of the PEDOT‐PIL films. In addition, the enhancement of charge transport was observed for PEDOT‐PIL complex when compared with PEDOT without PIL. Raman spectroscopy indicates that there is a reduced interaction between the charge carriers on the PEDOT and the counter ions bound to PIL, thus promoting charge carrier hopping rates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6872–6879, 2008     

Synthesis and properties of aromatic poly(ester amide)s with pendant phosphorus groups

Two series of phosphorus‐containing aromatic poly(ester amide)s with inherent viscosities of 0.46–3.20 dL/g were prepared by low‐temperature solution polycondensation from 1,4‐bis(3‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene and 1,4‐bis(4‐aminobenzoyloxy)‐2‐(6‐oxido‐6H‐dibenz〈c,e〉〈1,2〉oxaphosphorin‐6‐yl)naphthalene with various aromatic diacid chlorides. All the poly(ester amide)s were amorphous and readily soluble in many organic solvents, such as N,N‐dimethylformamide, N,N‐dimethylacetamide (DMAc), and N‐methyl‐2‐pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc and NMP solutions. Their casting films had tensile strengths of 71–214 MPa, elongations to break of 5–10%, and initial moduli of 2.3–6.0 GPa. These poly(ester amide)s had glass‐transition temperatures of 209–239 °C (m‐series) and 222–267 °C (p‐series). The degradation temperatures at 10% weight loss in nitrogen for these polymers ranged from 462 to 489 °C, and the char yields at 800 °C were 55–63%. Most of the poly(ester amide)s also showed a high char yield of 35–45%, even at 800 °C under a flow of air. The limited oxygen indices of these poly(ester amide)s were 35–46. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 459–470, 2002; DOI 10.1002/pola.10129     

New aromatic benzazole polymers II: Synthesis and conductivity of benzobisthiazole-co-polymers incorporated with 4-N,N-dimethylaminotriphenylamine groups

New aromatic benzobisthiazole copolymers containing 10–70 mol % of 4-N,N-dimethylamino-triphenylamine functionality were prepared from the respective dinitrile or dicarboxylic acid monomers, terephthalic acid, and 2,5-diamino-1,4-benzene-dithiol dihydrochloride in polyphosphoric acid. At the first approximation, the copolymers containing 10 mol % or less of the triarylamino moieties in the polymer chains still preserve the capability to form anisotropic (nematic) solutions at 10 wt % polymer concentration. This is an important requirement for processing the copolymers into fibers and films with good to excellent mechanical properties. Films with good mechanical integrity were cast from the dilute methanesulfonic acid solutions of the copolymers under reduced pressure. They showed electrical conductivity values of the order of 10⁻¹¹–10⁻¹⁰ S/cm in pristine state, with four to seven orders of magnitude increase upon exposure to mild oxidizing agents such as iodine vapor. On the contrary, the parent polymer, poly(p-phenylene benzobisthiazole) is an insulator with conductivity of less than 10⁻¹² S/cm, and its conductivity does not improve at all with exposure to iodine vapor. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 713–724, 1998     

Mechanistic and synthetic aspects of the reaction of alkyl esters of phosphorus with trimethylstannyl halides

The reaction of trimethylstannyl halides with trialkyl phosphates has been studied. The results are interpreted in terms of a mechanism involving a trimethylstannyloxyphosphonium salt intermediate. The much lower reactivity of the stannyl halides compared with their silicon analogs is explained by the lower ionization of the stannyl halide phosphate complexes and the unfavourable direction of the decomposition of the phosphonium salt intermediate. The reaction may be useful in synthesis of phosphates containing only one O-stannyl group, which can be used in generation of the acid function or replaced in reactions with compounds containing active halogen.     

Mathematical models of the initial stage of the thermal degradation of poly(vinyl chloride). II. The thermal degradation of poly(vinyl chloride) with effective removal of HCl

The dehydrochlorination of different samples of PVC under vacuum with continuous removal of HCl by freezing, has been studied at 180–210°C. The comparison of the kinetic curves of the dehydrochlorination of various samples of PVC which were obtained by us and other investigators, with the theoretical curves for the thermal degradation of idealized PVC in the absence of HCl has been carried out. This had made it possible to evaluate the influence of unstable fragments present in the original polymer on the initial rate of PVC degradation quantitatively. It has been shown that the distinction between the stationary rates of the dehydrochlorination of various samples of PVC is determined by the difference of the values of the average length of dehydrochlorination chain, l_av. The most probable interval of the values of l_av has been ascertained to be 4–12. It is established that the most probable value of the constant of the rate of dehydrochlorination of normal links of PVC, k₀, is 2.1 × 10^?7?2.5 × 10^?7 s^?1 at 200°C. © 1993 John Wiley & Sons, Inc.     

Multiple melting behavior of poly(butylene succinate). II. Thermal analysis of isothermal crystallization and melting process

The multiple melting behavior of poly(butylene succinate) (PBSu) was studied with differential scanning calorimetry (DSC). Three different PBSu resins, with molecular weights (MWs) of 1.1 × 10⁵, 1.8 × 10⁵, and 2.5 × 10⁵, were isothermally crystallized at various crystallization temperatures (T_c) ranging from 70 to 97.5 °C. The T_c dependence of crystallization half‐time (τ) was obtained. DSC melting curves for the isothermally crystallized samples were obtained at a heating rate of 10 K min⁻¹. Three endothermic peaks, an annealing peak, a low‐temperature peak L, and a high‐temperature peak H, and an exothermic peak located between peaks L and H clearly appeared in the DSC curve. In addition, an endothermic small peak S appeared at a lower temperature of peak H. Peak L increased with increasing T_c, whereas peak H decreased. The T_c dependence of the peak melting temperatures [T_m(L) and T_m(H)], recrystallization temperature (T_re), and heat of fusion (ΔH) was obtained. Their fitting curves were obtained as functions of T_c. T_m(L), T_re, and ΔH increased almost linearly with T_c, whereas T_m(H) was almost constant. The maximum rate of recrystallization occurred immediately after the melting. The mechanism of the multiple melting behavior is explained by the melt‐recrystallization model. The high MW samples showed similar T_c dependence of τ, and τ for the lowest MW sample was longer than that for the others. Peak L increased with MW, whereas peak H decreased. In spite of the difference of MW, T_m(L), T_m(H), and T_re almost coincided with each other at the same T_c. The ΔH values, that is crystallinity, for the highest MW sample were smaller than those for the other samples at the same T_c. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2039–2047, 2005     

Functionalization of a poly(vinyl alcohol) in the solid state with a swelling agent by methacrylic anhydride

Poly(vinyl alcohol‐co‐vinyl acetate) was functionalized by methacrylic anhydride to introduce functional groups by a new process that consisted of modifying a polymer directly from a powder form in the solid state. To favor the diffusion of the reagents, a swelling agent composed by a mixture of ethylene carbonate and propylene carbonate was used. N‐methylimidazole was used as a basic catalyst of the esterification reaction, adjusting the reaction times. This work presents the process and the effects of the formulation on anhydride conversion. The side reactions were also determined; they all involved N‐methylimidazole. Decarboxylation reactions of the carbonates were characterized, that is, going from ethylene carbonate to ethylene glycol, which is able to react with two anhydride molecules by esterification reactions to, respectively, form 2‐hydroxyethyl 2‐methylpropenoate and ethyl 1,2‐bis(2‐methyl propenoate). The same side reactions are possible with propylene carbonate but are less reactive than the starting ethylene carbonate. Model anhydrides such as hexanoic and heptanoic anhydrides, less reactive than methacrylic anhydride, were used to characterize a new anhydride decarboxylation reaction. The homogeneity of the grafting is also discussed, especially its dependence on the polymer properties, the diffusion modes of the reagents (carbonate mixture and the anhydride), and the competition between the diffusional and chemical kinetics of methacrylic anhydride. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1618–1629, 2004     

Phase separation in semicrystalline blends of poly(phenylene sulfide) and poly(ethylene terephthalate). II. Effect of poly(phenylene sulfide) homopolymer solubilization of PPS‐graft‐PET copolymer on morphology and crystallization behavior

The morphology and crystallization behavior of poly(phenylene sulfide) (PPS) and poly(ethylene terephthalate) (PET) blends compatibilized with graft copolymers were investigated. PPS‐blend‐PET compositions were prepared in which the viscosity of the PPS phase was varied to assess the morphological implications. The dispersed‐phase particle size was influenced by the combined effects of the ratio of dispersed‐phase viscosity to continuous‐phase viscosity and reduced interfacial tension due to the addition of PPS‐graft‐PET copolymers to the blends. In the absence of graft copolymer, the finest dispersion of PET in a continuous phase of PPS was achieved when the viscosity ratio between blend components was nearly equal. As expected, PET particle sizes increased as the viscosity ratio diverged from unity. When graft copolymers were added to the blends, fine dispersions of PET were achieved despite large differences in the viscosities of PPS and PET homopolymers. The interfacial activity of the PPS‐graft‐PET copolymer appeared to be related to the molecular weight ratio of the PPS homopolymer to the PPS segment of the graft copolymer (M_H/M_A). With increasing solubilization of the PPS graft copolymer segment by the PPS homopolymer, the particle size of the PET dispersed phase decreased. In crystallization studies, the presence of the PPS phase increased the crystallization temperature of PET. The magnitude of the increase in the PET crystallization temperature coincided with the viscosity ratio and extent of the PPS homopolymer solubilization in the graft copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 599–610, 2000     

Melt modification of poly(styrene‐co‐maleic anhydride) with alcohols in the presence of 1,3‐oxazolines

Various copolyesteramides were prepared by melt compounding at 220 °C involving reaction of poly(styrene‐co‐maleic anhydride), SMA, with 6, 17, and 28 wt % maleic anhydride content, and 1‐dodecanol, C12OH, in the presence of 2‐undecyl‐1,3‐oxazoline, C11OXA. Copolymer architectures were examined by means of ¹H NMR, FTIR, DSC, and TGA using model compounds prepared via solution reactions. While conversion of anhydride with alcohol was poor due to the thermodynamically favored anhydride ring formation, very high conversions were achieved when stoichiometric amounts of C11OXA were added. According to spectroscopic studies esteramide groups resulted from reaction of oxazoline with carboxylic acid intermediate. In the absence of alcohol, C11OXA reacted with anhydride to produce esterimides. Effective attachment of flexible n‐alkyl side chains via simultaneous reaction of C12OH and C11OXA resulted in lower glass‐transition temperatures of copolyesteramides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1222–1231, 2000     

Preparation and properties of poly(styrene-co-maleic anhydride)/silica hybrid materials by the in situ sol–gel process

Poly(styrene-co-maleic anhydride)/silica hybrid material has been successfully prepared from styrene–maleic anhydride copolymer and tetraethoxysilane (TEOS) in the presence of a coupling agent (3-aminopropyl)triethoxysilane (APTES) by an in situ sol–gel process. It was observed that the gel time of sol–gel solution was dramatically influenced by the amount of APTES. The hybrid material exhibits optical transparency almost as good as both silica gel and the copolymer. The covalent bonds between organic and inorganic phases were introduced by the aminolysis reaction of the amino group with maleic anhydride units of copolymer to form a copolymer bearing trimethoxysilyl groups, which undergo hydrolytic polycondensation with TEOS. The differential scanning calorimetry (DSC) showed that the glass transition temperature of the hybrid materials increases with increasing of SiO₂ composition. Photographs of scanning electron microscopy (SEM) and atomic force microscopy (AFM) inferred that the size of the inorganic particles in the hybrid materials was less than 20 nm. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1607–1613, 1998     

Synthesis of high molar mass poly(alkylene phosphate)s by polyaddition of diepoxides to difunctional phosphoric acids: Unusual elimination of the side reactions

The reaction between diepoxides and difunctional acids of phosphorus was studied as a potential route to linear polyesters of phosphoric acid. The reaction between diepoxide and P? OH groups in H₃PO₄ and related acids leads to linear phosphates, but cyclic phosphates are also formed as side products. The formation of such unreactive groups terminates polyaddition. However, cyclization is practically eliminated when the epoxide ring is fused to another ring, such as in cyclohexene oxide. A commercially available diepoxide containing two cyclohexene oxide moieties, 3,4‐epoxycyclohexylmethyl‐3,4‐epoxycyclohexanecarboxylate (ERL), was, therefore, used for polyaddition studies. Indeed, in the polyaddition of ERL with ethylphosphoric acid, high molecular weight (number‐average molecular weight up to 10⁴) linear polyphosphates were obtained. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3024–3033, 2001     

Synthesis of poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)] with a reactive group at the poly(ethylene glycol) end and its thermosensitive self‐assembling character

Poly[N‐isopropylacrylamide‐g‐poly(ethylene glycol)]s with a reactive group at the poly(ethylene glycol) (PEG) end were synthesized by the radical copolymerization of N‐isopropylacrylamide with a PEG macromonomer having an acetal group at one end and a methacryloyl group at the other chain end. The temperature dependence of the aqueous solutions of the obtained graft copolymers was estimated by light scattering measurements. The intensity of the light scattering from aqueous polymer solutions increased with increasing temperature. In particular, at temperatures above 40°C, the intensity abruptly increased, indicating a phase separation of the graft copolymer due to the lower critical solution temperature (LCST) of the poly(N‐isopropylacrylamide) segment. No turbidity was observed even above the LCST, and this suggested a nanoscale self‐assembling structure of the graft copolymer. The dynamic light scattering measurements confirmed that the size of the aggregate was in the range of several tens of nanometers. The acetal group at the end of the PEG graft chain was easily converted to the aldehyde group by an acid treatment, which was analyzed by ¹H NMR. Such a temperature‐induced nanosphere possessing reactive PEG tethered chains on the surface is promising for new nanobased biomedical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1457–1469, 2006