Interaction of N-(aryl)picolinamides with iridium. N–H and C–H bond activations

Reaction of N-(4-R-phenyl)picolinamide (R = OCH₃, CH₃, H, Cl and NO₂) with [Ir(PPh₃)₃Cl] in refluxing ethanol in the presence of a base (NEt₃) affords two yellow complexes (1-R and 2-R). The 1-R complexes contain an amide ligand coordinated to the metal center as a monoanionic bidentate N,N donor along with two triphenylphosphines, a chloride and a hydride. The 2-R complexes contain an amide ligand coordinated to the metal center as a monoanionic bidentate N,N donor along with two triphenylphosphines and two hydrides. Similar reaction of N-(naphthyl)picolinamide with [Ir(PPh₃)₃Cl] affords two organometallic complexes, 3 and 4. In complex 3 the amide ligand is coordinated to the metal center, via C–H activation of the naphthyl ring at the 8-position, as a dianionic tridentate N,N,C donor, along with two triphenylphosphines and one chloride. Complex 4 is similar to complex 3, except a hydride is bonded to iridium instead of the chloride. Structures of the 1-OCH₃, 2-Cl and 4 complexes have been determined by X-ray crystallography. All the complexes are diamagnetic, and show characteristic ¹H NMR signals and intense MLCT transitions in the visible region. Cyclic voltammetry on all the complexes shows a Ir^III–Ir^IV oxidation within 0.50–1.16 V vs. SCE and a reduction of the coordinated amide ligand within −1.02 to −1.25 V vs. SCE.     

Manganese(I)‐Catalyzed C–H Aminocarbonylation of Heteroarenes

A versatile manganese(I) catalyst was employed in C? H aminocarbonylation reactions of heteroarenes with aryl as well as with alkyl isocyanates using a removable directing group approach. Detailed experimental mechanistic studies were suggestive of an organometallic C? H manganesation step, followed by a rate‐determining migratory insertion.     

Inter- versus Intramolecular C−H Activation: Synthesis and Characterization of a Novel Platinum–Carbene Complex

¹³ C NMR spectroscopy as well as the short bond between the platinum and the C4 atom of the pyridine ring in 1 (1.95 Å) indicate the formation of a novel carbene species. Compound 1 is remarkably stable (m.p. 246°C), probably due to the presence of intramolecular hydrogen bonds, and is formed instead of the expected cyclometalated product. R=n-hexyl.     

Acylsilanes in Rhodium(III)‐Catalyzed Directed Aromatic C–H Alkenylations and Siloxycarbene Reactions with CC Double Bonds

Acylsilanes are known to undergo a 1,2‐silicon‐to‐oxygen migration under thermal or photochemical conditions to form siloxycarbenes. However, there are few reports regarding the application of siloxycarbenes in organic synthesis and surprisingly, their reaction with C? C double or triple bonds remains virtually unexplored. To facilitate such a study, previously inaccessible aromatic acylsilanes containing an ortho‐tethered C? C double bond were identified as suitable substrates. To access these key intermediates, we developed a new synthetic method utilizing a rhodium‐catalyzed oxidative Heck‐type olefination involving the application of an acylsilane moiety as a directing group. When exposed to visible‐light irradiation, the ortho‐olefinated acylsilanes underwent a smooth intramolecular cyclization process to afford valuable indanone derivatives in quantitative yields. This result paves the way for the development of new transformations involving siloxycarbene intermediates.     

Electronic influences on 3J(C,H) coupling constants via -S-, -S(O)- and -SO2-: their determination, calculation and comparison of detection methods

3J(C,H) coupling constants via a sulfur atom in two series of compounds, both including a sulfide, a sulfoxide and a sulfone, were detected experimentally and calculated by quantum mechanical methods. In the first series (1-3) the coupling between a hydrogen, bonded to an sp3 carbon, and an sp2 carbon is treated; the second series (4-6) deals with the coupling between a hydrogen, bonded to an sp3 carbon, and an sp3 carbon. Different pulse sequences (broadband HMBC, SelJres, 1D HSQMBC, J-HMBC-2, selective J-resolved long-range experiment and IMPEACH-MBC) proved to be useful in determining the long-range 3J(C,H) coupling constants. However, the dynamic behaviour of two of the compounds (4 and 6) led to weighted averages of the two coupling constants expected (concerning equatorial and axial positions of the corresponding hydrogens). DFT calculations proved to be useful to calculate not only the 3J(C,H) coupling constants but also the different contributions of FC, PSO, DSO and SD terms; the calculation of the Fermi contact term (FC) was found to be sufficient for the correct estimation of 3J(C,H) coupling constants.     

Eremophilane esters of Robinsonecio gerberifolius and their rearranged products. Study of the coupling constants (2)J(H, H), (3)J(H, H) and (4)J(H, H)

In the course of the basic hydrolysis of four eremophilane esters isolated from Robinsonecio gerberifolius, some rearrangements, eliminations, and additions occurred. Five compounds were obtained, three of them not previously described. Additionally, a new sesquiterpene was produced by autooxidation of compound 1. The (1)H and (13)C NMR spectra of these compounds were completely assigned by utilization of HMQC, HMBC, COSY, DEPT, and NOESY techniques. The long-range coupling constants of the peroxide 10 are reported, and all its coupling constants (2)J(H, H), (3)J(H, H), and (4)J(H, H) are calculated at the B3LYP/6-31G(d,p) level of theory. Their magnitude is explained in terms of electronic delocalization and the additivity of stereoelectronic effects.     

Cobalt(III)‐Catalyzed Intramolecular Cross‐Dehydrogenative C−H/X−H Coupling: Efficient Synthesis of Indoles and Benzofurans

An efficient cobalt(III)‐catalyzed intramolecular cross‐dehydrogenative C?H/N?H coupling of ortho‐alkenylanilines has been developed utilizing O₂ as a terminal oxidant. The developed reaction tolerates various reactive functional groups and allows the synthesis of diverse indole derivatives in good to excellent yields. The method was successfully extended to the synthesis of benzofurans through the intramolecular cross‐dehydrogenative C?H/O?H coupling of ortho‐alkenylphenols.     

Interpreting 2hJ(F,N), 1hJ(H,N) and 1J(F,H) in the hydrogen‐bonded FH–collidine complex

Ab initio EOM‐CCSD calculations were performed to determine ¹⁹F,¹H, ¹⁹F,¹⁵N and ¹H,¹⁵N spin–spin coupling constants in model complexes FH–NH₃ and FH–pyridine as a function of the F—H and F—N distances. The absolute value of ¹J(F,H) decreases and that of ^1hJ(H,N) increases rapidly along the proton‐transfer coordinate, even in the region of the proton‐shared F—H—N hydrogen bond. In contrast, ^2hJ(F,N) remains essentially constant in this region. These results are consistent with the recently reported experimental NMR spectra of FH–collidine which show that ^1hJ(H,N) increases and ¹J(F,H) decreases, while ^2hJ(F,N) remains constant as the temperature of the solution decreases. They suggest that the FH–collidine complex is stabilized by a proton‐shared hydrogen bond over the range of experimental temperatures investigated, being on the traditional side of quasi‐symmetric at high temperatures, and on the ion‐pair side at low temperatures. Copyright © 2002 John Wiley & Sons, Ltd.     

A Cobalt(I) Pincer Complex with an η2‐Caryl−H Agostic Bond: Facile C−H Bond Cleavage through Deprotonation,Radical Abstraction,and Oxidative Addition

The synthesis and reactivity of a Co^I pincer complex [Co(?³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ featuring an η²‐ C_aryl?H agostic bond is described. This complex was obtained by protonation of the Co^I complex [Co(PCP^NMe‐iPr)(CO)₂]. The Co^III hydride complex [Co(PCP^NMe‐iPr)(CNtBu)₂(H)]⁺ was obtained upon protonation of [Co(PCP^NMe‐iPr)(CNtBu)₂]. Three ways to cleave the agostic C?H bond are presented. First, owing to the acidity of the agostic proton, treatment with pyridine results in facile deprotonation (C?H bond cleavage) and reformation of [Co(PCP^NMe‐iPr)(CO)₂]. Second, C?H bond cleavage is achieved upon exposure of [Co(?³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ to oxygen or TEMPO to yield the paramagnetic Co^II PCP complex [Co(PCP^NMe‐iPr)(CO)₂]⁺. Finally, replacement of one CO ligand in [Co(?³P,CH,P‐P(CH)P^NMe‐iPr)(CO)₂]⁺ by CNtBu promotes the rapid oxidative addition of the agostic η²‐C_aryl?H bond to give two isomeric hydride complexes of the type [Co(PCP^NMe‐iPr)(CNtBu)(CO)(H)]⁺.     

Conformational analysis and stereochemical dependences of 31P–1H spin–spin coupling constants of bis(2‐phenethyl)vinylphosphine and related phosphine chalcogenides

Theoretical energy‐based conformational analysis of bis(2‐phenethyl)vinylphosphine and related phosphine oxide, sulfide and selenide synthesized from available secondary phosphine chalcogenides and vinyl sulfoxides is performed at the MP2/6‐311G** level to study stereochemical behavior of their ³¹P–¹H spin–spin coupling constants measured experimentally and calculated at different levels of theory. All four title compounds are shown to exist in the equilibrium mixture of two conformers: major planar s‐cis and minor orthogonal ones, while ³¹P–¹ H spin–spin coupling constants under study are found to demonstrate marked stereochemical dependences with respect to the geometry of the coupling pathways, and to the internal rotation of the vinyl group around the P(X)‐C bonds (X = LP, O, S and Se), opening a new guide in the conformational studies of unsaturated phosphines and phosphine chalcogenides. Copyright © 2009 John Wiley & Sons, Ltd.     

Configuration of functional trifluoromethylated dienoates,aryldienoates and trienoates

The configuration of certain trifluoromethylated functional dienoates, aryldienoates and trienoates is presented by the measurement of their ¹³C NMR and ¹⁹F NMR chemical shifts, and their ³ J(C–F), ⁴J(H–F) and through‐space ⁵J(H–F) coupling constants. Copyright © 2002 John Wiley & Sons, Ltd.     

The C–HCl2Cu(II) synthon in the structural direction and assembly of supramolecular complexes with the 3,3′-bis(2-benzimidazolyl)-2,2′-dipyridine ligand and its N-substituted derivatives

Three new Cu(II) supramolecular complexes [Cu(L₁)Cl₂]·2DMF (1), [Cu(L₂)Cl₂] (2) and [Cu(L₃)Cl₂]·DMF (3) (L₁ = 3,3′-bis(2-benzimidazolyl)-2,2′-dipyridine, L₂ = 3,3′- bis(N-ethyl-2-benzimidazolyl)-2,2′-dipyridine and L₃ = 3,3′-bis(N-benzyl-2-benzimidazolyl)-2,2′-dipyridine) have been prepared and characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. X-ray structural analysis of L₁, L₂·3.5H₂O and L₃·H₂O indicates that all three ligands adopt the trans conformation with the two benzimidazole fragments located on opposite sides of the dipyridyl backbone. While in complexes 1–3, all the ligands display the cis conformation and behave as bidentate chelating reagents to coordinate with Cu(II). The inorganic chloride ions always act as a reliable hydrogen bonded acceptor in these structures, and the resulting C–HCl₂Cu supramolecular synthons play a significant role in the formation and stabilization of the structures. Moreover, additional non-covalent interactions, such as C–Hπ, are also identified to extend the discrete (0-D) or low-dimensional (1-D) motifs into high-dimensional architectures.     

Open‐chain unsaturated selanyl sulfides: stereochemical structure and stereochemical behavior of their 77Se–1H spin–spin coupling constants

Stereochemical structure of nine Z‐2‐(vinylsulfanyl)ethenylselanyl organyl sulfides has been investigated by means of experimental measurements and second‐order polarization propagator approach calculations of their ¹H–¹H, ¹³C–¹H, and ⁷⁷Se–¹H spin–spin coupling constants together with a theoretical conformational analysis performed at the MP2/6‐311G** level. All nine compounds were shown to adopt the preferable skewed s‐cis conformation of their terminal vinylsulfanyl group, whereas the favorable rotational conformations with respect to the internal rotations around the C–S and C–Se bonds of the internal ethenyl group are both skewed s‐trans. Stereochemical trends of ⁷⁷Se–¹H spin–spin coupling constants originating in the geometry of their coupling pathways and the selenium lone pair effect were rationalized in terms of the natural J‐coupling analysis within the framework of the natural bond orbital approach. Copyright © 2012 John Wiley & Sons, Ltd.     

Introduction of (2‐CF3)Phenyl Group via Nickel‐catalyzed C–Cl Bond Activation and Arylation

A simple and mild catalytic arylation via C–Cl bond activation is described. The phenyl group containing a 2‐trifluoromethyl group was introduced into the aromatic imine molecules through C,C‐coupling reaction between chloroarenes and the organozinc reagent, bis(2‐(trifluoromethyl)phenyl)zinc, with tetrakis(trimethylphosphine)nickel(0) complex as an effective catalyst. Under catalytic conditions chlorinated benzalimines were quantitatively converted into the expected benzalimines with trifluoromethyl group(s).