Determination of organotins in aquatic plants by headspace SPME followed by GC-PFPD determination

Optimal conditions of headspace solid-phase microextraction followed by gas chromatography coupled to pulsed flame photometric detection (SPME–GC–PFPD) have been investigated to validate the analysis of 11 organotin compounds in plant matrices including methyl-, butyl-, and phenyltin compounds. The extraction of organotin compounds from vegetal matrices has been carried out using optimized conditions of HCl-based extraction. The use of headspace SPME to preconcentrate the analytes allowed most of the detection limits to be obtained sub-0.5?ng(Sn)?g^?1. The precision evaluated using RSD with six replicates ranges between 5 and 10% (except for triphenyltin: 17%). The accuracy of the method was validated on spiked or polluted vegetal samples taken from Bizerte Lagoon (Tunisia) and by comparison with classical liquid–liquid extraction (LLE). These results highlight the suitability of the selected method for organotin control in complex environmental matrices such as aquatic plants.     

Determination of organometallic compounds by capillar gas chromatography – inductively coupled plasma mass spectrometry

The separation and detection of volatile organometallic compounds containing tin, iron, and nickel has been achieved using capillary GC–inductively coupled plasma–mass spectrometry (capillary GC-ICP-MS). Detection limits range from 3.0 to 7.0 pg/s. The presence of volatile organotin compounds in a harbor sediment has been confirmed. The retention range of the organometallic compounds analyzed by capillary GC-ICP-MS has been extended considerably beyond that possible in earlier studies (retention indices up to 3400).     

Speciation of organotin compounds by tandem mass spectrometry

The collison-induced dissociation of a range of organotin compounds has been examined by tandem (MS–MS) mass spectrometry in order to investigate the potential of the technique for speciation without prior chromatographic separation. Tables of parent–daughte ion relationships are prepared for a group of six closely related compounds. The results obtained are sufficiently characteristic to distinguish between the isolated compounds and to identify the individual components of a simple mixture. This procedure has potential applications for less volatile compounds and for quantitative analysis.     

Speciation and detection of organotins from PVC pipe by micro‐liquid chromatography–electrospray–ion trap mass spectrometry

This paper describes the application of a micro‐liquid chromatography–electrospray–ion trap mass spectrometry (µ‐LC–ES–ITMS) method for separation and detection of organotin compounds leached from potable‐water polyvinyl chloride (PVC) pipe. Dibutyltin (DBT) is added as a heat stabilizer to PVC. DBT was determined in 1 l water samples that had remained static in PVC pipes over several days (totaling 96 h). Other organotin compounds in the leachate were screened for, by using µ‐LC–ES–ITMS. An initial level of approximately 1 µgl^?1 of DBT resulted within 24 h, with a subsequent drop and then a rise in DBT levels over the next 96 h to 0.8 µgl^?1. Published in 2001 by John Wiley & Sons, Ltd.     

Tandem mass spectral studies of the fragmentation pathways of organotin compounds of general formula R3SnR′

Positive ion‐electron impact (EI) mass spectra of organotin compounds of the type R₃SnR′, where R = Ph, n−Bu, n−Pe and R′ = allyl, vinyl, H and Ph, have been recorded. The spectra were also examined by tandem mass spectrometry (MS‐MS) in order to establish fragmentation reaction mechanisms for compounds bearing mixed substituents. Fragmentation patterns of six organotin compounds, based on precursor‐product ion relationships are proposed. Significant differences were found in the reaction pathways of organotin compounds with different substituents. This technique has potential to predict the effect of substitution on the mass spectra of organotin compounds. Copyright © 2000 John Wiley & Sons, Ltd.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography – mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography – mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30–1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Ion—Molecule reactions of environmentally significant organotin compounds in a triple quadrupole mass spectrometer system

Tandem MS techniques have been used to examine the formation of cluster ions derived from organotin compounds of environmental significance. The cluster formation was based on the addition of either water or methanol molecules (common HPLC solvents) to a cationic species derived from the organotin compound. For the compounds and conditions studied, cluster adducts were only observed from trisubstituted tin cations. The results show that, in high-pressure ionization methods used in the interface between HPLC and MS, the tin atom may be associated with a range of ions depending on the system parameters, and that care should be taken if selection ion monitoring (SIM) is to be used.     

The influence of the sample introduction system on signals of different tin compounds in inductively coupled plasma-based techniques

The influence of the sample introduction system on the signals obtained with different tin compounds in inductively coupled plasma (ICP) based techniques, i.e., ICP atomic emission spectrometry (ICP–AES) and ICP mass spectrometry (ICP–MS) has been studied. Signals for test solutions prepared from four different tin compounds (i.e., tin tetrachloride, monobutyltin, dibutyltin and di-tert-butyltin) in different solvents (methanol 0.8% (w/w), i-propanol 0.8% (w/w) and various acid matrices) have been measured by ICP–AES and ICP–MS. The results demonstrate a noticeable influence of the volatility of the tin compounds on their signals measured with both techniques. Thus, in agreement with the compound volatility, the highest signals are obtained for tin tetrachloride followed by di-tert-butyltin/monobutyltin and dibutyltin.The sample introduction system exerts an important effect on the amount of solution loading the plasma and, hence, on the relative signals afforded by the tin compounds in ICP–based techniques. Thus, when working with a pneumatic concentric nebulizer, the use of spray chambers affording high solvent transport efficiency to the plasma (such as cyclonic and single pass) or high spray chamber temperatures is recommended to minimize the influence of the tin chemical compound. Nevertheless, even when using the conventional pneumatic nebulizer coupled to the best spray chamber design (i.e., a single pass spray chamber), signals obtained for di-tert-butyltin/monobutyltin and dibutyltin are still around 10% and 30% lower than the corresponding signal for tin tetrachloride, respectively. When operating with a pneumatic microconcentric nebulizer coupled to a 50 °C-thermostated cinnabar spray chamber, all studied organotin compounds provided similar emission signals although about 60% lower than those obtained for tin tetrachloride. The use of an ultrasonic nebulizer coupled to a desolvation device provides the largest differences in the emission signals, among all tested systems.     

Remote stereocontrol using functionalized allylmetal reagents

Alk-2-enyl(trialkyl)stannanes with heteroatom substituents at the 4-, 5-, and 6-positions are transmetallated stereoselectively using tin(IV) halides to generate allyltin trihalides, which react with aldehydes to give (3Z)-homoallylic alcohols with efficient 1,5-, 1,6-, and 1,7-stereocontrol. This chemistry has been used to develop new strategies for natural product synthesis. Because of the toxicity of organotin reagents and the problems in removing organotin residues from reaction products, alternative procedures that avoid the use of organotin reagents have been investigated. To date, alk-2-enylgermanium reagents have been shown to deliver effective 1,5- and 1,6-stereocontrol, which is analogous to that observed for the organotin compounds. Organobismuth intermediates, which can be generated from allyl bromides and zinc-bismuth(III)iodide, react with aldehydes with efficient 1,5-stereocontrol which is complementary to that observed with the organo-stannanes or -germanes in that (3E)-homoallylic alcohols are obtained.     

Toxicity of butyltin,phenyltin and inorganic tin compounds to sulfate‐reducing bacteria isolated from anoxic marine sediments

The toxicity of butyltin, phenyltin and inorganic tin compounds to three pure strains of sulfate‐reducing bacteria (SRB), isolated from a tributyltin (TBT)‐polluted sediment, was determined. The isolated strains were identified as belonging to the genus Desulfovibrio. A new toxicological index (GR₂₅) was developed to assay the toxicity of organotin compounds. Deleterious effects on suspended anaerobic cell cultures were observed for concentrations ranging between 500 and 600 µM for tin tetrachloride, 55 and 260 µM for triorganotins, 30 and 90 µM for diorganotins, and 1 and 6 µM for mono‐organotins. Whereas the number of substituents influenced the toxicity of organotins, the type of substituent (butyl or phenyl) proved to have little or no impact. Trisubstituted compounds (tributyl‐ and triphenyl‐tin) were less toxic to these strains of SRB than the monosubstituted forms (monobutyl‐ and monophenyl‐tin). This is the opposite trend to that currently reported for aerobic organisms. Under the given anoxic conditions, the toxicity of organotin compounds obtained yielded a significant negative correlation with the total surface area (TSA) of the tested molecules. Comparison of the TBT toxicity data observed for different microbial groups suggests that the tolerance of bacteria to organotin compounds might be related to organotin–cell wall interactions as well as to aerobic or anaerobic metabolise pathways. Copyright © 2000 John Wiley & Sons, Ltd.     

Application of a heated electrospray interface for on-line connection of the AAS detector with HPLC for detection of organotin and organolead compounds

A heated electrospray interface that affords high sensitivity and long-term signal stability for AAS detection of metal-containing analytes in organic or organic-water solvents after HPLC separation is described. The vitreous body of the electrospray interface is externally heated above the boiling point of the solvent and quartz furnace AAS is used for detection. Interface working conditions were optimized with a full experimental design for the detection of tin- (tetramethyl-, tetraethyl-, tetrabutyl-, and tetrapentyltin, tributyltin chloride, dibutyltin dichloride, and butyltin trichloride) and lead- (tetraethyl- and tetraphenyllead) containing compounds in the column eluate. The heated electrospray interface enables use of a wide range of flow rates - from 50 to 1000 micro L min(-1). The measurement sensitivity and detection limit achieved were compared with those obtained by use of the thermospray interface and post-column conversion of the organotin compounds to gaseous hydrides. The detection limits for the low-molecular weight species of the homologous series (2.8+/-0.1 ng (140+/-5 ng mL(-1)) for tetramethyltin and 3.1+/-0.2 ng (155+/-10 ng mL(-1)) for tetraethyltin) were obtained approximately one order of magnitude lower than those obtained by use of the thermospray interface. With this HPLC-ES-QFAAS system the tributyltin content of BCR reference material 477, mussel tissue, was analyzed. This system was also applied to analysis of tetraethyllead in gasoline samples.     

Determination of organotin compounds in marine sediments using graphite furnace atomic absorption spectrometry

Organotin compounds, especially tributyltin, began to cause concern 10 years ago due to a high toxicity towards marine organisms. Several methods of analysing organotin compounds in various matrices have already been developed to determine organotin species simultaneously, but these are quite expensive as special equipment and specialized staff are needed. A simple screening method, which determines the organic tin compounds in the sediment, has therefore been developed and validated. The method can easily be implemented in laboratories accustomed to tracelement analyses; the sediment is extracted by a two-phase extraction and the organic extract is analysed using graphite furnace atomic absorption spectrometry (GF AA.) The screening method has been validated using high-pressure liquid chromatography-inductively coupled plasma mass spectrometry (HPLC–ICP MS).     

Interfacial effects in organophilic montmorillonite–poly(ϵ‐caprolactone) nanocomposites

In the last few years much progress has been made in the development of hybrid polymer–inorganic filler nanocomposites. Nevertheless, many questions remain. The comprehension of the structure and the interactions at the polymer–nanofiller interface are crucial to foresee and control the properties of nanocomposites. Because of the high surface ratio of the inorganic nanofiller, the interface is expected to have a prevailing role in determining the nanocomposite properties. In this study we use X‐ray photoelectron spectroscopy (XPS) as a tool for the surface characterization of an organophilic montmorillonite/poly(ε‐caprolactone) exfoliated nanocomposite. The XPS core levels of the nanocomposite have been compared with those obtained from its precursors, and analyzed as reference compounds to evaluate eventual differences attributable to the polymer–nanofiller interfacial interactions. The XPS investigation has allowed us to propose a qualitative model of possible interface interactions between poly(ε‐caprolactone) and the organo‐modified montmorillonite. The model is substantiated by Fourier transform infrared spectroscopy (FTIR). © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3907–3919, 2004     

Quantitative analysis of triphenylboron in environmental water samples by liquid chromatography/mass spectrometry.

Liquid chromatography/mass spectrometry (LC/MS) has been applied to the analysis of triphenylboron, which has been produced as a substitute for organotin compounds, in water. Although commercial triphenylboron compounds are produced as pyridinyl complexes, the chemical form in water is supposed to be mainly triphenylboron after liberating pyridine. The triphenylborons were extracted from water with an Empore C18 extraction disk under acidic condition, and the extracts were introduced directly into a liquid chromatograph-mass spectrometer equipped with a negative ion electrospray ionization interface. Identification of the compounds was performed with specific ions produced from the triphenylboron, and a quantitative analysis was carried out using the peak areas. The average recoveries from distilled water, seawater and river water at 0.30 ng/ml were 92.3, 100 and 85.3%, respectively. A detection limit of 0.023 ng/ml for triphenylboron was achieved.     

气相色谱-质谱法同时测定聚氯乙烯塑料制品中的10种有机锡化合物

采用气相色谱-质谱法(GC-MS)同时快速有效地测定了聚氯乙烯（PVC）塑料制品中的二丁基氯化锡、单丁基氯化锡、三乙基氯化锡、三苯基氯化锡、三丁基氯化锡、三丙基氯化锡、二苯基氯化锡、四丁基锡、二辛基氯化锡和单苯基氯化锡等10种有机锡化合物。使用四氢呋喃溶解PVC样品,甲醇沉淀样品中的聚合物,超声萃取其中的有机锡化合物,将提取液衍生化后用正己烷萃取,采用GC-MS总离子流和选择离子进行定性定量测定。对衍生化时间、衍生化pH值、衍生化试剂用量、沉淀试剂用量等样品前处理条件进行了优化,并进行了线性关系、回收率、精密度等考察。结果表明,方法的线性范围为0.5～50 mg/L,线性相关系数为0.9978～0.9997。10种有机锡化合物的回收率及相对标准偏差(n=9)分别为84.23%～109.1%和4.24%～10.75%。所建立的方法能很好地应用于PVC塑料制品中有机锡化合物的检测。     

Synthesis and <Emphasis Type="Italic">in vitro</Emphasis> Fungicidal Study of Organotin(IV) Complexes of Monomethyl Glutarate

The synthesis and study of new coordination compounds of some organotin(IV) chlorides with monomethyl glutarate are reported. The ligand molecule appears to be bound to the tin atom through the carboxylic oxygen. The results obtained from ¹H, ¹³C, and ¹¹⁹Sn NMR, FT-IR and ¹¹⁹Sn Mossbauer spectra show that the complexes are pentacoordinated with the trigonal bipyramidal structure. Biological screening of organotin(IV) derivatives shows promising activity, especially for the triphenyltin complex exhibiting higher antifungal activity. In addition, the rest of the compounds also prove to be active against various fungi used.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography - mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30-1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

On-line capillary supercritical fluid chromatography-inductively coupled plasma mass spectrometry for the analysis of organometallic compounds

Supercritical fluid chromatography with inductively coupled plasma-mass spectrometric detection is a new and useful technique for the analysis of organometallic compounds. An interface has been developed for coupling these techniques. The interface is compact, easy to assembel, and causes minimal disruption to either instrument. A series of organotin, organoarsenic, and organorion compounds has been used to evaluate the interface and ICPMS as a detector for SFC. The effect of analyte concentration and restrictor temperature on peak intensity has been investigated and the effect of the mobile phase on the plasma has also been studied to assess background interference from changes in the plasma.     

Fine-tuned characterization at the solid/solution interface of organotin compounds grafted onto cross-linked polystyrene by using high-resolution MAS NMR spectroscopy

The structural characterization of organotin compounds that are grafted onto insoluble cross-linked polymers has necessarily been limited to elemental analysis, infrared spectroscopy, and in a few instances, solid-state NMR spectroscopy. This important bottleneck in the development of such grafted systems has been addressed by using high-resolution magic angle spinning (hr-MAS) NMR spectroscopy. The great potential of this technique is demonstrated through the structural characterization of diphenylbutyl-(3,4) and dichlorobutylstannanes (5,6), grafted onto divinylbenzene cross-linked polystyrene by means of a suitable linker (1, 2). First, conditions suitable for the application of hr-MAS NMR spectroscopy were identified by characterizing the (1)H resonance line widths of the grafted organotin moiety following swelling of the functionalized beads in eight representative solvents. The presence of clearly identifiable tin coupling patterns in both the 1D (13)C and 2D (1)H-(13)C HSQC spectra, and the incorporation of (119)Sn chemical shift and connectivity information from hr-MAS 1D (119)Sn and 2D (1)H-(119)Sn HMQC spectra, provide an unprecedented level of characterization of grafted organotins directly at the solid/liquid interface. In addition, the use of hr-MAS (119)Sn NMR for reaction monitoring, impurity detection, and quantification and assessment of the extent of coordination reveals its promise as a novel tool for the investigation of polymer-grafted organotin compounds. The approach described here should be sufficiently general for extension to a variety of other nuclei of interest in polymer-supported organometallic chemistry.     

Organotin speciation in textile and plastics by microwave-assisted extraction HPLC-ESI-MS

The HPLC coupled with electrospray ionization mass spectrometry (ESI-MS) was applied for the determination of tributyltin chloride (TBT), triphenyltin chloride (TPhT), triethyltin chloride (TET) in textile and plastic samples. The separation was performed in the isocratic mode on ion exchange SCX column with a mobile phase containing methanol-ammonium acetate (50 mmol l(-1))-acetic acid (90/9.98/0.02, v/v/v). Sensitive detection of three organotin compounds by ESI-MS was performed on the basis of multiple reaction monitoring (MRM) mode. Limits of detection were 0.4, 20, 4 ng ml(-1) for TBT, TPhT, and TET, respectively. Microwave-assisted extraction (MAE) of organotin compounds was finished in 60% (v/v) methanol aqueous solution. Under the experimental conditions used, recoveries of three organotin compounds obtained for spiked textile and plastic samples are in the range of 55-95% and the R.S.D.s are 3-9%.