Light-scattering study of polyelectrolyte complexes: Heparin with partially aminoacetalized poly(vinyl alcohol) in aqueous solution

The structure of soluble polyelectrolyte complexes composed of heparin (Hep) and partially aminoacetalized poly(vinyl alcohol) (PVAA) in aqueous solution was investigated by light scattering. The pH was fixed at 3.2 while the ionic strength and mixing ratio were varied. At high ionic strength (0.5), polyelectrolyte complexes were not formed owing to the screening effect of simple salts on polyion charges. At low ionic strength (0.005), polyelectrolyte complexes formed were stable and dispersed when either the polycation or the polyanion was in great excess, whereas the complexes became unstable and coagulated when the concentrations of polycation and polyanion approached each other. At intermediate ionic strength (0.1), when PVAA was in excess, complex formation was similar to that at low ionic strength (0.005); but with an excess of Hep, polyelectrolyte complexes with similar structure (i.e., roughly spherical with average diameters about 2,700 Å) were formed over a wide range of mixing ratio. This observation is of interest in connection with the physiological activity of Hep in vivo.     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.     

Reinvestigation on the buildup mechanism of alternate multilayers consisting of poly(L-glutamic acid) and poly(L-, D-, and DL-lysines)

The buildup mechanism of polypeptide multilayers prepared by the layer-by-layer deposition of a polyanion (poly(L-glutamic acid) (PGA)) and polycations (poly(L-lysine) (PLL), poly(D-lysine) (PDL), and copoly(DL-lysine)(PDLL)) was reinvestigated by using in situ ATR-IR spectroscopy. A difference spectral technique applied to analyze the spectra indicated that the deposition of both the PGA and PLL (PDL) layers accompanies the formation of secondary structures consisting mainly of the antiparallel pleated sheet (the beta-sheet) structure, and that the formation of the beta-sheet structure cannot always be explained in terms of polyanion/polycation complex formation or charge compensation between the polyanion and polycations, although it has been considered as a major process in the multilayer buildup process. Instead, the present paper proposes the following mechanism. During the deposition of the polyelectrolyte, a small amount of the beta-sheet structures are produced at the interface as a result of charge compensation between a polyelectrolyte and an oppositely charged polyelectrolyte in the multilayer. The beta-sheets act as nuclei from which further propagation of the structure takes place at the solution/multilayer interfaces. The driving force of the buildup process in the new mechanism is a kinetically favorable insolubilization of each polyelectrolyte in solution at the interfaces.     

Polymers containing quaternary ammonium groups based on poly(N-vinylimidazole)

A poly(N-vinylimidazole) (PNVI)—based poly(carboxybetaine) with two methylene groups between the opposite charges was achieved by the nucleophilic addition reaction of the mentioned aminic polymer to the carbon-carbon double bond of acrylic acid (AA). Treatment of poly(carboxybetaine) with concentrated HCl (2 N) for long time leads to the corresponding cationic polyelectrolyte. The poly(carboxybetaine) is soluble in both water and aqueous solutions of salts such as: LiCl, NaCl, NaHCO₃, CaCl₂, Na₂SO₄. In water and in the first three salts, poly(carboxybetaine) exhibits a non-polyelectrolyte behaviour (a linear dependence of reduced viscosities on polymer or salt concentration), while in the remaining two salts, a slight polyelectrolyte behaviour is observed. The cationic polyelectrolyte is soluble in water and aqueous solutions of LiCl, NaCl, CaCl₂ and NaHCO₃, except Na₂SO₄. It has a polyelectrolyte behaviour in all solutions. Also, the binding trends of the added salts by polymers are discussed.     

Preparation and swelling behavior of amphoteric superabsorbent composite with semi-IPN composed of poly(acrylic acid)/Ca-bentonite/poly(dimethyldiallylammonium chloride)

Amphoteric superabsorbent composite with semi-interpenetrating polymer networks (semi-IPN) composed of poly(acrylic acid) (PAA)/Ca-bentonite/poly(dimethyldiallylammonium chloride) (PDMDAAC) was prepared by a combination of intercalative polymerization and a sequential IPN method and the effects of reaction parameters on the swelling capacity were studied. PDMDAAC was used as a polycation to modify bentonite and form semi-IPN with lightly crosslinked PAA. FTIR and TG were used to characterize the amphoteric superabsorbent composites with semi-IPN. The thermal stability of the product was not degraded as in the case of using small molecular surfactant to modify bentonite. The contents of carboxylic groups and nitrogen had been determined. This indicated that the product with certain content of carboxylic groups and nitrogen is inclined to exhibit excellent swelling capacity. The presence of PDMDAAC improved the swelling capacity. The resulting amphoteric superabsorbent composite showed excellent swelling capacity of 1578 g/g in distilled water and 136 g/g in 0.9 wt% NaCl solution. Copyright © 2007 John Wiley & Sons, Ltd.     

重氮树脂型聚离子复合物

高分子化合物沿分子链(主链和侧链)排列多量可离解基团(每个链节可有1～2个)称聚电解质或聚离子^[1]。聚电解质在水中可离解成两部分,若离解后,聚合物链带负电荷,称聚阴离子电解质或聚负离子;若带正电荷,称聚阳离子电解质或聚正离子。     

Polyelectrolyte multilayers prepared from water-soluble poly(alkoxythiophene) derivatives.

Electronically conducting polyanion and polycation based on poly(alkoxythiophene) derivatives, poly-3-(3'-thienyloxy)propanesulfonate (P3TOPS) and poly-3-(3'-thienyloxy)propyltriethylammonium (P3TOPA) have been synthesized. Both polymers are water-soluble and exhibit high conjugation length in solution and in the solid state. These polyelectrolytes were used to prepare conducting and electroactive polyelectrolyte multilayers by the sequential layer-by-layer adsorption technique. In aqueous solutions multilayers of P3TOPS with inactive polyelectrolytes (e.g., poly(diallyldimethylammonium chloride), PDADMA) displayed electrochemical and optical behavior similar to polythiophene films prepared in organic media. Their in-plane conductivity was low (ca. 1.6 x 10(-)(5) S cm(-)(1)). The conductivity could, however, be increased by a factor of ca. 40 in "all-thiophene" films, in which P3TOPA was substituted for the inactive polycation (PDADMA). The interpenetration of layers is of prime importance in films containing conducting components. The interpenetration of P3TOPS was studied by measuring the charge-transfer rate across an insulating polyelectrolyte multilayer between the substrate and the P3TOPS layer with modulated electroreflectance. The extent of interpenetration was 8-9 polyelectrolyte layers, the length scale (7-15 nm) depending on the nature of the insulating layer and, especially, on the ionic strength of the solution used for the adsorption of P3TOPS.     

Complexation of linear and poly(ethylene oxide)‐grafted poly(methacryl oxyethyl trimethylammonium chloride) with poly(ethylene oxide‐block‐sodium methacrylate)

The interactions between oppositely charged polyelectrolytes were studied in saline aqueous solutions as functions of the temperature and the salt and polymer concentrations. The polyanion was a diblock copolymer composed of a poly(ethylene oxide) block and a poly(sodium methacrylate) block. Two polycations were used, the homopolymer poly(methacryl oxyethyl trimethylammonium chloride) and its poly(ethylene oxide)‐grafted analogue. By dynamic light scattering and turbidity measurements, it was observed that the salt concentration, temperature, and counterion size had a significant effect on the formation of the polymer complexes in aqueous solutions. At a fixed salt concentration and a fixed temperature, it was possible to form completely soluble complexes of an ionic polymer in aqueous solutions between poly(ethylene oxide)‐grafted poly(methacryl oxyethyl trimethylammonium chloride)and the polyanion with a poly(ethylene oxide) block at a 1:1 anion/cation ratio. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1904–1914, 2003     

Phase separation in poly(N‐isopropyl acrylamide)/water solutions. II. Salt effects on cloud‐point curves and gelation

The cloud‐point temperatures (T_clo's) of poly(N‐isopropyl acrylamide) (PNIPAM)/water solutions with NaCl, NaBr, or NaI were measured. All these salts reduced the T_clo's of PNIPAM/water solutions to different extents, in the following order: NaCl > NaBr > NaI. The higher the concentration of the added salt was, the more greatly T_clo dropped. A dynamic viscoelasticity investigation of the PNIPAM/water solutions with the salts indicated that during phase separation, the system changed from a homogeneous fluid into a physically crosslinked network, and the addition of salts also reduced the temperature at which this change began. The gelation temperature (T_gel) and the scaling exponent of the PNIPAM/water solutions with NaBr were obtained with dynamic scaling theory, and T_gel was found to be close to T_clo. That the addition of salts to the solution decreased T_clo and T_gel to the same extent further proved that the network structure was formed with the phase separation in the PNIPAM/water solutions. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 901–907, 2001     

分子复合法制备新型聚合物驱油剂CMC/P(AM-DMDAAC)

通过具有互补结构的阴离子聚合物羧甲基纤维素(CMC)与阳离子聚合物聚(丙烯酰胺-二甲基二烯丙基氯化铵)[P(AM-DMDAAC)]间的聚电解质分子复合作用,制备了分子复合型CMC/P(AM-DMDAAC)新型驱油剂.电导率测定及紫外光谱分析结果表明,CMC与P(AM-DMDAAC)可以在水相通过库仑力形成均相聚电解质复合溶液.由于分子复合形成的独特超分子结构,复合溶液粘度显著增加,分别为组分聚合物溶液的5.2倍和9.0倍,在高温和高剪切环境中的粘度保持能力也明显优于其组分聚合物.     

Polysalt complexes of poly(crown ethers) and sodium carboxymethylcellulose

Insoluble polysalt complexes are formed on mixing aqueous solutions of poly(vinylbenzo-18-crown-6) (P18C6) and sodium carboxymethylcellulose (CMC) in the presence of certain salts. Potassium salts are especially effective, converting the neutral P18C6 into a polycation which then interacts with sodium CMC. Nearly quantitative precipitation can be achieved at low KCl concentration (ca. 0.005M) for a crown/carboxylate ratio of approximately 5, while for 0.1–0.2M KCl the precipitation is close to completion at a crown/CMC ratio of about 2. The precipitates solubilize again on addition of water or concentrated KCl. Precipitation also occurs with CsCl but not with NaCl. Potentiometric measurements were carried out to determine the complex formation constant of the three alkali ions to P18C6. Their values can be used to rationalize the observed phenomena. Charge equivalence appears to play an important role in the formation of the polysalt complexes.     

二甲基硅氧烷甘醇乙酸基共聚物水溶液的表面活性

通过表面张力的测定, 考察了不同无机盐和温度对二甲基硅氧烷甘醇乙酸基共聚物(PSEP)表面活性的影响, 进而研究PSEP在不同介质中胶束形成热力学性质. 研究表明, NaCl、NaBr和CaCl2的存在可提高PSEP的表面活性. 而且, PSEP的胶束化焓变对熵变呈线性相关, 说明存在焓/熵补偿现象.     

Assembly of poly(N-isopropylacrylamide)-co-acrylic acid microgel thin films on polyelectrolyte multilayers: Effects of polyelectrolyte layer thickness, surface charge, and microgel solution pH

Temperature- and pH-sensitive poly(N-isopropylacrylamide)?Cco-acrylic acid (pNIPAm-co-AAc) microgels were deposited on glass substrates coated with polyelectrolyte multilayers composed of the polycation poly(allylamine hydrochloride) (PAH) and the polyanion poly(sodium 4-styrenesulfonate) (PSS). The microgel density and structure of the resultant films were investigated as a function of: (1) the number of PAH/PSS layers (layer thickness); (2) the charge on the outer layer of the polyelectrolyte multilayer film; and (3) the pH of microgel deposition solution. The resultant films were studied by differential interference contrast optical microscopy, atomic force microscopy, and scanning electron microscopy. It was found that the coverage of the microgels on the surface was a complex function of the pH of the deposition solution, the charge on the outer layer of the polyelectrolyte thin film and the PAH/PSS layer thickness; although it appears that microgel charge plays the biggest role in determining the resultant surface coverage.     

Novel hydrogels from diepoxy‐terminated poly(ethylene glycol)s and aliphatic primary diamines: synthesis and equilibrium swelling studies

New hydrogels were prepared from diepoxy‐terminated poly(ethylene glycol)s of approximate molecular weights 600, 1000, 2000, and 4000 Da and aliphatic primary diamines with different numbers of carbon atoms (ethylenediamine, 1,4‐diaminobutane, hexamethylenediamine, 1,8‐octanediamine, 1,10‐decanediamine, 1,12‐dodecanediamine), in water or ethanol–water mixture, depending on the amine solubility. The swelling behavior of these gels was tested in distilled water/aqueous solution at constant temperature and the equilibrium swelling degree (ESD) was determined for structurally different hydrogels and under various environmental conditions. It was shown that ESD was influenced by the molecular weight of PEG oligomers, amine/epoxy groups mole ratio, amine chain length, temperature, pH, and concentration of salts present in the swelling medium. Higher ESDs were obtained for either longer‐chain PEGs, non‐stoichiometric amine/epoxy groups ratio, shorter amines, acidic pH, lower temperatures, or in the absence of salts. Copyright © 2009 John Wiley & Sons, Ltd.     

Anomalous viscosity behavior of rodlike polyelectrolytes: Partially sulfonated poly(2-benzoyl-1,4-phenylene)s in aqueous solution

Two stereoisomeric poly(2-benzoyl-1,4-phenylene)s were synthesized. Polymer I has exclusively a head-to-tail structure; however, polymer II contains both head-to-head and head-to-tail units. The sulfonation reaction of polymers I and II was found to occur mainly on the meta position of the benzoyl group on the phenylene backbone. The viscosities of polymers Ia (27% sulfonated) and Ic (51% sulfonated) in aqueous solutions at 25°C were measured with and without NaBr addition. Upon the addition of NaBr (0.05 and 0.1M), the reduced viscosities were found to increase gradually and reach a constant value in each case after standing at room temperature for 30–40 h. Without NaBr, the time effect was not found. The reduced viscosities of solutions with NaBr were also higher than those without the salt. These results are quite different from the typical “polyelectrolyte” behavior. A possible explanation of the salt effect of rigid rodlike polymers such as sulfonated poly(2-benzoyl-1,4-phenylene) is discussed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1425–1429, 1998     

Polyelectrolyte complexes. I. Synthesis and characterization of some insoluble polyanion-polycation complexes

The synthesis of some water-insoluble synthetic polyelectrolyte complexes formed between a weak polyanion and a strong polycation was followed. Sodium salts of poly(acrylic acid) and of some copolymers of acrylic acid with itaconic acid or maleic acid were used as anionic polymers. Cationic polyelectrolytes with quaternary ammonium salt groups in the main chain were used as strong polycations. The cationic polymers were different as concerns both the content of quaternary nitrogen atoms and the degree of branching. The complex formation was followed by the variation of the conductivity and of the specific viscosity of the reaction medium as well as by the turbidimetric titration versus the unit molar ratio polyanion/polycation. The deviation of the endpoint from stoichiometry was influenced mainly by the structure of the complementary polymers and by their molecular weights. The greater the structural differences, the higher the endpoint deviation from stoichiometry. Only insoluble polyelectrolyte complexes (PEC) were obtained in all the polyanion/polycation systems taken into account. The PECs were separated and characterized by elemental and spectral analyses as compared with the complementary polymers. © 1996 John Wiley & Sons, Inc.     

Swelling of poly(ethylene oxide) gel in aqueous solutions of sodium dodecyl sulfate with added sodium chloride

The swelling behavior of poly(ethylene oxide) (PEO) gels in aqueous solutions of sodium dodecyl sulfate (SDS) with and without NaCl was investigated. In the absence of NaCl, PEO gels with different degrees of cross-linking began to swell from a concentration lower than the critical micelle concentration (cmc) of SDS, then showed sigmoidal enhancements of swelling in a higher SDS concentration region until the degrees of swelling reached maximum values. The SDS concentration at which the swelling began to appear was in reasonable agreement with the critical aggregation concentration (cac) value reported for the aqueous PEO system. For the cases where NaCl was present, the swelling behavior of PEO gel was different from that when NaCl was absent in the following way. The concentrations where the swelling begins to appear, and hence those where the degree of swelling rises steeply, decreased with an increase in NaCl concentration. The ultimate degrees of swelling at higher concentration regions also decreased with an increase in the NaCl concentration. The lowering of the SDS concentrations at which the PEO gel began to swell is in line with the decreases in the cmc of SDS solutions containing NaCl and also with the decreases in the cac of PEO solution. Electronic Publication     

Counterions in poly(allylamine hydrochloride) and poly(styrene sulfonate) layer-by-layer films

The amount of counterions in layer-by-layer (LBL) films of poly(allylamine hydrochloride) (PAH) and poly(styrene sulfonate) (PSS) has been determined with X-ray photoelectron spectroscopy (XPS) for films prepared from solutions with various NaCl concentrations. Sodium and chloride counterions are present in LBL films produced from salt solutions, which are located at the surface and in the bulk of the films. The percentage of bulk counterions increases with the ionic strength of the polyelectrolyte before reaching a constant value. The bulk sodium/sulfur percentage ratios tend to 0.8 for samples washed with pure water and for samples washed with NaCl aqueous solutions, while the bulk chlorine/nitrogen percentage ratios tend to 0.5 for the same samples. The ratio between the percentages of polyelectrolyte ionic groups lies close to unity for all samples, indicating that counterions do not contribute to charge compensation in the polyelectrolyte during the adsorption process. The presence of counterions in LBL films is explained by Manning condensation near the polyelectrolyte ionic groups, leading to inter-polyelectrolyte ionic bondings via ionic networks. It is believed that condensation leads to the formation of NaCl crystallites in these LBL films, which was confirmed by X-ray diffraction measurements.     

Structure of the polyion complex between poly(sodium P-styrene sulfonate) and poly(diallyl dimethyl ammonium chloride)

Stoichiometric and nonstoichiometric polyion complex films were prepared from poly(sodium p-styrene sulfonate) and poly(diallyl dimethyl ammonium chloride). X-ray photoelectron spectroscopy revealed that the ionic groups in the complex are more ionized than in each component polymer. Fluorescence measurements showed that the complex had a main emission peak around 300 nm, whereas the peak for its original polyanion occurred at 324 nm. With the monomer and excimer peaks of the phenyl rings taken to be at 294 and 324 nm, respectively, the ratio of excimer to monomer emission intensities increased in proportion to the mole fraction of polyanion in the observed range 0.44–0.59. There was no discontinuity at the stoichiometric composition. Furthermore, the change in peak position shows that the local aggregation of phenyl groups in the polyanion was destroyed by complexation with the polycation through Coulombic forces. These results, together with the visual observation of the transparency of the films, mean that the mixing between polyanion and polycation chains in the polyion complex is on the molecular level and that this polymer alloy is miscible.     

Viscosity behavior of poly(glyceryl methacrylate) in the presence of borate and phenylboronate ions

The viscosity behavior of polyelectrolyte solutions induced by borate or phenylboronate complexation with poly(glyceryl methacrylate) (PGM) has been investigated. In dilute solutions borate ions can form monodiol (1/1) complexes and didiol (2/1) intramolecular complexes. Both types of complex are anionic. Thus, the polymer is characterized by the existence of charged sites on the chain and loops formed by intramolecular complexation. On the contrary, phenylboronate can only give monodiol 1/1 complexes. In the presence of passive salt, the charges are screened. By addition of borate ion to a PGM solution, a decrease of the initial polymer viscosity due to loop formation is first observed, then the anionic charges fixed on the chain by complex formation induce an expansion of the polyelectrolyte and the viscosity of the solution increases. The situation is different for the PGM-phenyl boronate system, where no intramolecular crosslink is present. In this case the viscosity of the solution increases with phenyl boronate concentration. But for a fixed complexing ion concentration it will tend to that of the neutral polymer when NaCl is added. ©1995 John Wiley & Sons, Inc.