Studies on thermotropic liquid crystalline polymers. XV. Synthesis and properties of liquid crystalline copoly(imide-ester)s

Three series of the thermotropic liquid crystalline copoly(imide-ester)s were prepared by direct polycondensation. The first two series of the copoly(imide-ester)s were synthesized from N-(4-carboxyphenyl) trimellitimide with N,N-di(hydroxypropyl) pyromellitic diimide and various aromatic diols. The third series of copoly(imide-ester)s were prepared by N-(4-carboxyphenyl) trimellitimide with various imide-diols (methylene spacer = 2–6) and phenyl hydroquinone. The structures and thermal properties of the synthesized poly(imide-ester)s were examined by FTIR spectrum, wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermal optical polarized microscope, and thermogravimetric analysis (TGA). The effects of the structures of the aromatic diols on the thermal properties of the resulting copoly(imide-ester)s were investigated. It was found that most of the copoly(imide-ester)s possessed excellent mesophase stabilities and thermostabilities. The mesophase stabilities of poly(imide-ester)s decreased with the increase of the size of lateral group, and the mesophase range increased with the increase of the amount of PhHQ. No significant odd-even effects were observed between the methylene spacer lengths and transition temperatures. © 1996 John Wiley & Sons, Inc.     

New poly(amide-imide)s syntheses. XVII. Preparation and properties of poly(amide-imide)s derived from 3,3-Bis[4-(4-aminophenoxy)phenyl]phthalimidine and various bis(trimellitimide)s

A series of novel bis(phenoxy)phthalimidine-containing poly(amide-imide)s III were synthesized by the direct polycondensation of 3,3-bis[4-(4-aminophenoxy)phenyl]phthalimidine (BAPP) with various aromatic bis(trimellitimide)s in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly(amide-imide)s III , having inherent viscosities up to 1.36 dL/g, were obtained in quantitative yields. All resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N-dimethylacetamide. All the soluble poly(amide-imide)s afforded transparent, flexible, and tough films. The glass transition temperatures of these polymers were in the range of 267–322°C and the 10% weight loss temperatures were above 490°C in nitrogen. Some properties of poly(amide-imide)s III were compared with those of the corresponding isomeric poly(amide-imide)s III′ prepared from 3,3-[4-(4-trimellitimidophenoxy)phenyl]-phthalimidine and various aromatic diamines. © 1996 John Wiley & Sons, Inc.     

LC-Polyimides. XIX. Chiral and thermotropic poly(esterimide)s based on N-(4′-caboxyphenyl)trimellitimide and novel chiral spacers

Starting from commercial S- or R-3-bromo-2-methylpropanol, several new spacer diols were prepared. These spacers were polycondensed with the acid chloride of N-(4′-carboxyphenyl)trimellitimide. The resulting poly(ester-imide)s were characterized by elemental analyses, viscosity measurements, ¹H-NMR spectroscopy, DSC- and WAXD-measurements and optical microscopy. The poly(ester-imide)s derived from chiral, aliphatic spacers form layer structures in the solid state, but no liquid crystalline phase. With nonsymmetrical, nonchiral semialiphatic spacers, poly(ester-imide)s were obtained, which form a smectic E or H phase in the solid state, a smectic-A or -C phase in the melt, and a nematic phase, when the spacer possesses an odd number of CH₂ groups. The polycondensation of a chiral semialiphatic spacer yielded thermotropic poly(ester-imide)s with either S- or R-configuration. WAXD patterns measured with synchrotron radiation at various temperatures proved that a layer structure exists in the solid state (smectic-E^* or H^*) and a chiral smectic-A^* or -C^* phase plus a cholesteric phase in the melt. A 1 : 1 blend of the S- and R-polyesters was also studied, but did not show unusual features. © 1995 John Wiley & Sons, Inc.     

New poly(amide-lmide)s syntheses. XV. Preparation and properties of poly(amide-imide)s derived from 9, 9-bis[4-(4-aminophenoxy) phenyl]fluorene and various bis(trimellitimide)s

Fifteen bis(phenoxy) fluorene-containing poly(amide-imide)s III were synthesized by the direct polycondensation of 9,9-bis[4-(4-aminophenoxy)phenyl]fluorene (BAPPF) with var-ious aromatic bis(trimellitimide)s II in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Poly(amide-imide)s III having inherent vis-cosities up to 1.45 dL/g were obtained in quantitative yields. Most of the resulting polymers showed an amorphous nature and were readily soluble in polar solvents such as NMP and N,N-dimethylacetamide. All the soluble poly(amide-imide)s afforded transparent, flexible, and tough films. The glass transition temperatures of these polymers were in the range of 263–315°C and the 10% weight loss temperatures were above 510°C in nitrogen. Some properties of poly(amide-imide)s III were compared with those of the corresponding isomeric poly(amide-imide)s III ′ prepared from 9,9-[4-(4-trimellitimidophenoxy)phenyl]fluorene and various aromatic diamines. © 1995 John Wiley & Sons, Inc.     

Liquid crystalline comb-like polyimides with biphenyl-based side groups

We have synthesized series of comb-like polyimides with mesogenic units in their side groups. Such comb-like polyimides were obtained by polycondensation of aromatic diamines bearing biphenyl-based mesogenic moieties with bicyclo[2,2,2]oct-7-ene 2,3,5,6-tetracarboxylic dianhydride (BCDA). The different diamines, with two lengths of spacer (with 6 and 11 methylene groups), were synthesized in three steps using as mesogenic groups: biphenyl, 4-cyanobiphenyl and 4-(2-methyl-1-butoxy)biphenyl. The synthesis of the polyimides was performed in two steps: polycondensation of a dianhydride with a diamine in N-methyl-2-pyrrolidone at room temperature giving the corresponding polyamic acid, followed by thermal cyclization into the corresponding polyimide. The comb-like polyimides were studied by X-ray diffraction between room temperature and 250°C. Two types of smectic structure were established: SmA₁ for the long spacer and SmC₁ for the short spacer.     

Synthesis of poly(ester amide)s by the melt polycondensation of semiaromatic polyesters with ethanolamine and their characterization

Semiaromatic poly(ester amide)s (PEAs) were synthesized by the melt polycondensation of ethanolamine (EA) derivatives with dimethyl terephthalate and ethylene glycol in the presence of tetrabutyl titanate as a catalyst, and their crystallization and thermal properties were investigated. The introduction of an amide group into a semiaromatic polyester such as poly(ethylene terephthalate) (PET) produced PEAs (EA-modified PET polymers) with an increase in the melting point. However, these PEAs were found to decompose at a lower temperature than PET on the basis of TGA. Moreover, direct pyrolysis/mass spectrometry measurements suggested that an initial step of the thermal decomposition was a β-CH hydrogen-transfer reaction via asix-member ring transition state at the ester–ethylene–amide unit, at which carbon–oxygen bond scission took place to yield carboxyl and N-vinylamide end groups. Furthermore, molecular orbital calculations using trimer models bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalate, N-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]-4-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyloxycarbonyl]benzamide, and N,N′-bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalamide strongly supported the idea that the β-CH hydrogen-transfer reaction in the thermal decomposition of PEAs might occur more easily at the methylene group next to the amide group in an ester–ethylene–amide unit rather than at the methylene group next to the ester group in an ester–ethylene–ester unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2184–2193, 2007     

Highly fluorinated monomers precursors of side-chain liquid crystalline polysiloxanes

Two series of monomers, 4-[4-(allyloxy)benzoyloxy]phenyl-3-(perfluoro-n-alkyl)ethyl propanoates and 2-(perfluoro-n-alkyl)ethyl-4-[4-(undec-10-en-1-oyloxy)-benzoyloxy] benzoates have been synthesised. These compounds contain a fluorinated chain obtained from 2-(perfluoro-n-alkyl)ethanol or from 2-(perfluoro-n-alkyl)ethyliodide, and an aliphatic chain containing a double bond attached to a mesogenic moiety. Their hydrosilylation with polymethylhydrogenosiloxane gives the corresponding polysiloxanes with a spacer with three or ten methylene units. These new fluorinated compounds are characterized by a combination of techniques consisting of differential scanning calorimetry (DSC) and thermal optical polarized microscopy. All the monomers exhibited smectogenic properties of type A but for the monomers with a long spacer between the unsaturated function and the mesogenic core (compounds B), the mesophase range decreases dramatically. All of the corresponding polysiloxanes exhibited a liquid crystalline behaviour over a wide temperature range. The influence of the fluorinated chain lengthening leads for the monomers and the polymers to an increasing of the transition temperatures. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4487–4496, 1999     

Synthesis and mesomorphic behavior of a new series of side-chain liquid crystalline polymethacrylates bearing 2,6-naphthylene-based mesogen

A new homologous series of liquid crystalline (LC) polymethacrylates, the poly[ω-(2-phenoxycarbonyl-naphthalene-6-yloxy)alkyl methacrylate]s, in which the length of the alkyl spacer is varied between 3 and 12 methylene units, have been synthesized by free-radical polymerization. The prepared polymers were studied by IR and ¹H-NMR spectroscopy, viscosity measurements, differential scanning calorimetry (DSC), and polarized microscopy. Polymers with 3 or 4 methylene units spacer were glassy in nature, whereas those with 5–12 methylene units spacer exhibited smectic behavior. The glass transition temperatures decrease on increasing spacer length. The isotropization temperatures and the corresponding transition entropies showed an odd–even effect, with the odd members exhibiting the higher values. This effect attenuates on increasing spacer length. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2391–2399, 1999     

Organosoluble optically transparent poly(amide-imide)s based on 2,2-bis [<Emphasis Type="Italic">N</Emphasis>-(3-carboxyphenyl)phthalimidyl]- hexafluoropropane and 2,2-bis [<Emphasis Type="Italic">N</Emphasis>-(4-carboxyphenyl)phthalimidyl]- hexafluoropropane and various aromatic diamines

 Two diimide-dicarboxylic acids, 2,2-bis[N-(4-carboxyphenyl)phthalimidyl]hexafluoropropane (p-I) and 2,2,-bis[N-(3-carboxyphenyl)phthalimidyl]hexafluoropropane (m-I), were prepared by azeotropic condensation of 4,4′-(hexafluoroisopropylidene)diphthalic anhydride and p-aminobenzoic acid or m-aminobenzoic acid at a 1:2 molar ratio in N,N-dimethylacetamide/toluene. Two series of organosoluble and colorless poly(amide–imide)s were synthesized from diimide–diacid p-I or m-I with ten kinds of aromatic diamines by direct polycondensation using triphenyl phosphite and pyridine as condensing agents. The thin films cast from N,N-dimethylacetamide were measured by UV–vis spectroscopy and Macbeth color-eye colorimetery, the cutoff wavelengths of almost all the films were below 400 nm (361–389 nm) and the values of the parameter b* were between 15.31 and 34.72; these polymers are much lighter in color than other analogous polymers. Almost all the polymer were soluble in N-methyl-2-pyrrolodone, N,N-dimethylacetamide, N,N-dimethylformamide and dimethyl sulfoxide, and some polymers could dissolve in less polar solvents, such as dioxane and tetrahydrofuran, etc. The cast films exhibited yield strengths of 95–131 MPa, tensile strengths ranging from 92 to 130 MPa, elongations at break from 9 to 27%, and initial moduli from 2.1 to 3.3 GPa. The poly(amide–imide)s had glass-transition temperatures between 259 and 328°C and 10%-weight-loss temperatures above 510 °C in nitrogen and air, indicating excellent thermal stability. Received: 25 April 2001 Accepted: 27 June 2001     

New poly(amide–imide)s syntheses. XXIII. Synthesis and properties of poly(amide–imide)s derived from 4,4′‐[1,4‐phenylenebis(isopropylidene‐1,4‐phenyleneoxy)]dianiline and various bis(trimellitimide)s

A series of poly(amide–imide)s III_a–m containing flexible isopropylidene and ether groups in the backbone were synthesized by the direct polycondensation of 4,4′‐[1,4‐phenylenebis(isopropylidene‐1,4‐phenyleneoxy)]dianiline (PIDA) with various bis(trimellitimide)s II_a–m in N‐methyl‐2‐pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The resulting poly(amide–imide)s had inherent viscosities in the range of 0.80–1.36 dL/g. Except for those from the bis(trimellitimide)s of p‐phenylenediamine and benzidine, all the polymers could be cast from DMAc into transparent and tough films. They exhibited excellent solubility in polar solvents. The 10% weight loss temperatures of the polymers in air and in nitrogen were all above 495°C, and their T_g values were in the range of 201–252°C. Some properties of poly(amide–imide)s III were compared with those of the corresponding poly(amide–imide)s V prepared from the bis(trimellitimide) of diamine PIDA and various aromatic diamines. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 69–76, 1999     

Liquid crystalline polymers V. Thermotropic liquid crystalline poly(azomethine-ether)s containing a cycloalkanone moiety in the polymer backbone

A new homologous series of thermotropic liquid crystalline poly(azomethine-ether)s was synthesized by solution polycondensation of various diformyl-alpha,omega-diphenoxyalkanes, I-VIII with 2,5-bis(m-aminobenzylidene)cyclopentanone, XI and 2,6-bis(m-aminobenzylidene)cyclohexanone, XII. The inherent viscosities of the polymers were in the range 0.34-0.75 dI g^-1. The mesomorphic properties were studied as a function of the diphenoxyalkane spacer length. Analyses by DSC and optical polarized microscopy demonstrated that the poly(azomethine-ether)s form nematic mesophases over wide temperature ranges. The poly(azomethine-ether)s based on the cyclohexanone moiety had better thermal stabilities than the corresponding poly(azomethine-ether)s based on cyclopentanone.     

Synthesis and photoluminescence properties of novel polyarylates bearing pendent naphthylamine chromophores

A new series of blue photoluminescent aromatic polyesters (polyarylates) were synthesized from 1-[N,N-di(4-carboxyphenyl)amino]naphthalene with various bisphenols by the diphenylchlorophosphate (DPCP) activated direct polycondensation in a medium of pyridine and lithium chloride. The synthesis, basic characterizations, photoluminescence and electrochemical properties of this series of novel polyarylates bearing pendent naphthylamine chromophores were investigated. All polymers not only had good solubility in many polar aprotic solvents and excellent thin-film-forming ability, but also exhibited high T_g values, good thermal stability and lower highest occupied molecular orbital (HOMO) level. Thus, these naphthylamine-containing polyarylates may be widely applied in P-LED as hole-transporting layer and blue light-emitting materials due to their proper HOMO level, excellent thermal stability and fluorescence quantum efficiency.     

Liquid crystalline comb-like polyimides with biphenyl-based side groups

We have synthesized series of comb-like polyimides with mesogenic units in their side groups. Such comb-like polyimides were obtained by polycondensation of aromatic diamines bearing biphenyl-based mesogenic moieties with bicyclo[2,2,2]oct-7-ene 2,3,5,6-tetracarboxylic dianhydride (BCDA). The different diamines, with two lengths of spacer (with 6 and 11 methylene groups), were synthesized in three steps using as mesogenic groups: biphenyl, 4-cyanobiphenyl and 4-(2-methyl-1-butoxy)biphenyl. The synthesis of the polyimides was performed in two steps: polycondensation of a dianhydride with a diamine in N-methyl-2-pyrrolidone at room temperature giving the corresponding polyamic acid, followed by thermal cyclization into the corresponding polyimide. The comb-like polyimides were studied by X-ray diffraction between room temperature and 250°C. Two types of smectic structure were established: SmA₁ for the long spacer and SmC₁ for the short spacer.     

Study on the thermotropic liquid crystalline polycarbonates. IV. Synthesis and properties of liquid crystalline poly(imide-carbonate)s

Two series of novel thermotropic liquid crystalline poly(imide-carbonate)s were prepared by melt polycondensation from various arylene or alkylene bis(phenylcarbonate)s by using N,N′-bis(hydroxyethyl)pyromellitimide and N,N′-bis(hydroxypropyl)pyromellitimide as monomers. Thermotropic liquid crystalline properties were characterized by a polarizing microscope with a heating stage and a differential scanning calorimeter (DSC). Nematic melts were found for the synthesized aromatic poly(imide-carbonate)s. In order to investigate whether the pyromellitimide unit could be used as a mesogenic unit for preparing LC polymers, a series of aliphatic poly(imide-carbonate)s was prepared in this study. However, no significant LC textures were found under the observation by polarizing microscope. It was suggested that the aspect ratio of the pyromellitimide unit was too short to form liquid crystalline poly(imide-carbonate)s. In addition, it was interesting that the aliphatic poly(imide-carbonate)s with a longer spacer (n = 3) in the pyromellitimide unit showed better crystallinity. Thermostabilities of all synthesized poly(imide-carbonate)s were measured by thermogravimetric analysis (TGA). © 1994 John Wiley & Sons, Inc.     

Studies on thermotropic liquid crystalline elastomers. II. Synthesis and properties of liquid crystalline polyester elastomers

Three series of novel thermotropic liquid crystalline polyester elastomers (TLCPEEs) were prepared by direct polycondensation from terephthalic acid, polyols (M_n = 1000 or 2000), and various diols. The structures and thermal properties of the synthesized TLCPEEs were examined by FTIR spectroscopy, differential scanning calorimetry, thermal optical polarized microscopy, thermogravimetric analysis, and wide-angle x-ray diffraction. The effects of kinds and amount of diols and the molecular weight of polyols on the thermal properties of TLCPEEs were studied. By introducing long flexible spacers (PE-1000 or PE-2000) into the polymer main chain, all polymers showed two-phase morphology under the thermal optical microscopic observation. All of the synthesized polymers, except polymer P1-BPA60 and P2-BPA60, which were prepared from BPA, exhibited thermotropic liquid crystalline properties that were in the smectic phase. © 1995 John Wiley & Sons, Inc.     

Fluorine containing poly(amide-imide)s: synthesis and formation of Langmuir-Blodgett monolayers

Soluble fluorine containing poly(amide-imide)s, PAI(1-4), were synthesized from diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimide-1,4-yl]hexafluoropropane with various diamines by direct polycondensation in N-methyl-2-pyrrolidone (NMP) containing CaCl₂ and using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide, dimethyl sulfoxide and tetrahydrofuran. Their Langmuir monolayers were studied at the air/water interface. The monolayers were generally stable at the water surface and could be reproducibly transferred onto solid substrates to build up Langmuir-Blodgett (LB) multilayers. The LB mono- and multilayers were characterized by ultra-violet/visible spectroscopy (UV-Vis), surface plasmon resonance, atomic force microscopy.     

Synthesis and characterization of random semi-flexible thermotropic liquid crystalline poly(ester-imide)s

A series of novel poly(ester-imide)s were prepared by the reaction of meta- and para-substituted trimellitimide dicarboxylic diacid chlorides with various diols containing four, five, six, seven, eight, nine, 10, and 12 methylene groups by a solution polymerization technique utilizing refluxing 1,2,4-trichlorobenzene as a solvent. The poly(ester-imide)s were characterized by dilute solution viscosity, infrared spectroscopy, differential scanning calorimetry, and polarized light microscopy. The inherent viscosities of the meta-substituted poly(ester-imide)s ranged from 0.06 to 0.25 dL/g while those of the para-substituted poly(ester-imide)s ranged from 0.10 to 0.65 dL/g and were obviously of higher molecular weight. The meta series were amorphous and showed no mesophase formation. All para-substituted poly(ester-imide)s exhibited monotropic mesophase identified as smectic A order. © 1994 John Wiley & Sons, Inc.     

Liquid crystalline polymers containing heterocycloalkane mesogens. 2. Side-chain liquid crystalline polysiloxanes containing 2,5-disubstituted-1,3-dioxane mesogens

Polysiloxanes and copolysiloxanes containing 2-(p-hydroxyphenyl)-5-(p-methoxyphenyl)-1,3-dioxane and 5-(p-methoxyphenyl)-1,3-dioxan-2-yl as mesogenic units and an aliphatic spacer containing 11 and 10 methylene units, respectively, were synthesized. Their phase behavior was studied by differential scanning calorimetry and optical polarization microscopy, and compared with the phase behavior of the polysiloxanes and copolysiloxanes containing 4-methoxy-4′-hydroxybiphenyl and 4-cyano-4′-hydroxybiphenyl mesogens attached to the polymer backbone through an aliphatic spacer containing 11 methylene units. All synthesized polymers present smectic mesomorphism. The polymers containing 4-methoxy-4′-hydroxybiphenyl and 4-cyano-4′-hydroxybiphenyl are also crystalline, while the polymers containing 1,3-dioxane based mesogens do not crystallize.     

High Performance Poly(ether-amide)s Derived from 1,1-Bis[4-(4-carboxy methylene phenoxy)-3-methyl phenyl] Cyclopentane and Aromatic Diamines

A series of new methyl substituted poly(ether-amide)s were synthesized by using direct Yamazaki’s phosphorylative polycondensation of novel diacid 1,1-bis[4-(4-carboxymethyl phenoxy)-3-methylphenyl] cyclopentane (BCMMP) with various aromatic diamines. These polymers were characterized by FTIR spectroscopy. Inherent viscosities of these polymers were in the range 0.25 to 0.42 dL/g indicating moderate molecular weight built-up. These polymers exhibited excellent solubility in various polar aprotic solvents such as NMP, DMSO, DMAc, DMF, pyridine, and were insoluble in THF, DCM and chloroform. X-Ray diffraction pattern of polymers showed that incorporation of methyl substituent on aromatic backbone and cardo cyclopentylidene moiety containing ether linkage and methylene spacer would disturb the chain regularity and packing, leading to amorphous nature. Thermal analysis by TGA showed excellent thermal stability of polymers. The glass transition temperature T_g were in the range 195–210°C. The structure-property correlation among this poly(ether-amide)s was studied, in view of these polymer’s potential applications as high performance polymers.     

New optically active poly（amide-imide）s derived from N, N′-（4,4-diphthaloyl）-bis-L-leucine and hydantoin derivatives： Synthesis and properties

Six new optically active poly(amide-imide)s(5a-f) were synthesized through the direct polycondensation reaction of N,N'-(4,4'- diphthaloyl)-bis-L-leucine(3) with six hydantoin derivatives(4a-f).Triphenyl phosphite(TPP)/pyridine in the presence of calcium chloride(CaCl_2) and N-methyl-2-pyrrolidone(NMP) were successfully applied for direct polycondensation.The polycondensation reactions produce a series of new poly(amide-imide)s(5a-f) in high yields,and inherent viscosity between 0.42 and 0.55 dL/g.The re...