PREPARATION AND CHARACTERIZATION OF INCLUSION COMPLEXES OF TWO-ARM LINEAR AND FOUR-ARM STAR-SHAPED POLY（ε-CAPROLACTONE）S WITH α-CYCLODEXTRIN

Both four-ann star-shaped poly（ε-caprolactone） （4sPCL） and two-ann linear PCL （2LPCL） were synthesized and their inclusion complexation with α-cyclodextrin （α-CD） were studied. The inclusion complexes （ICs） formed between the PCL polymers and α-CD were characterized by ^1H-NMR, DSC, TGA, WAXD, and FT-1R, respectively. Both branch ann number and molecular weight of the PCL polymers have apparent effect on the stoichiometry （CL：CD, mol：mol） of these ICs. All these analytical results indicate that the branch arms of the PCL polymers are incorporated into the hydrophobic α-CD cavities and their original crystalline properties are completely suppressed. Moreover, the inclusion complexation between two-ann linear or four-ann star-shaped PCL polymers and α-CD not only enhances the thermal stability of the guest PCL polymers but also improves that of α-CD.     

STRUCTURAL CHARACTERIZATION OF POLY(ϵ-CAPROLACTONE) AND POLY(ϵ-CAPROLACTONE-b-ISOBUTYLENE-b-ϵ-CAPROLACTONE) BLOCK COPOLYMERS BY MALDI-TOF MASS SPECTROMETRY

Poly(?-caprolactone)(PC1) and PC1-polyisobutylene-PC1 (PC1-PIB-PC1) block copolymers were synthesized in anhydrous toluene by in situ conversion of 2-methyl-1-propanol (2M1P) and α,ω-dihydroxy PIB, respectively, to the corresponding aluminum alkoxide by reaction with a stoichiometric amount of triethylaluminum (TEA) followed by the addition of e-caprolactone. Structural characterization of 2M1P-initiated PCl by gel permeation chromatography (GPC) and matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) mass spectrometry (MS) demonstrated the presence of cyclic oligomers, which are produced by intramolecular transesterification reactions that become significant at high monomer conversions. A minor fraction of chains bearing carboxylic acid termini was also observed in the MALDI-TOF mass spectrum; however, carboxylic acid chain ends could not be detected by ¹³C NMR analysis. Thus, the likely origin of the carboxylic acid termini is fragmentation of the initiator residue from the chain end during MALDI-TOF analysis. For PCl-PIB-PCl block copolymers, two different α,ω-telechelic PIB diols were used as macroinitiators, one derived from allyl and one from isopropenyl terminated PIB. Terminal olefins were converted to primary alcohols via regioselective hydroboration followed by alkaline hydrogen peroxide oxidation. After reaction with ?-caprolactone, formation of a block copolymer was evidenced by a shift of the polymer peak to lower elution volume in GPC analysis. Block copolymers possessed molecular weight distributions ≤1.4, and molecular weights of the PCl blocks calculated from GPC were in excellent agreement with those found using MALDI-TOF MS. Structural analysis indicated that the PCl end blocks were severed from the crude block copolymer during MS analysis, for both allyl- and isopropenyl-derived materials. For allyl-derived materials the PCl blocks were found to predominantly carry a C₂ residue at the point of detachment of the PIB block; however, the isopropenyl-derived block copolymers showed a complex mixture of different residues suggesting a complex fragmentation mechanism during loss of the PIB block.     

SYNTHESIS AND CHARACTERIZATION OF POLY(AMINO ACID-UREA)S COMPRISING NOVEL TRIBLOCK COPOLYMERS OF POLY(TETRAHYDROFURAN) AND POLY(γ-BENZYL L-GLUTAMATE)S

A kind of novel triblock copolymers of poly(γ-benzyl L-glutamate)-b-poly(tetrahydrofuran)-b-poly(γ-benzyl L-glutamate)s(PBLG-b-PTHF-b-PBLG)was synthesized by using bis(3-aminopropyl)terminated polytetrahydrofuran to initiate the ring-opening polymerization ofγ-benzyl L-glutamate N-carboxyanhydride(BLG-NCA).The corresponding multiblock poly(amino acid-urea)s were prepared in one-pot protocol from the chain extension of PBLG-b-PTHF-b-PBLG with MDI.The resulting triblock and multiblock copolymers were chara...     

SYNTHESIS AND CHARACTERIZATION OF THERMOTROPIC LIQUID CRYSTALLINE POLY(ESTER-IMIDE)S

A new series of thermotropic liquid crystalline poly(ester-imide)s were synthesized via a solution polycondensation process.Thepolymers were also characterized by IR,DSC,polarizing microscopy and WAXDmeasurements.     

CONTROL OF DIMENSIONAL STABILITY AND DEGRADATION RATE IN ELECTROSPUN COMPOSITE SCAFFOLDS COMPOSED OF POLY(D,L-LACTIDE-co-GLYCOLIDE) AND POLY(ε-CAPROLACTONE)

The purpose of this study is to investigate the effect of composition poly(D,L-lactide-co-glycolide)/poly(ε- caprolactone)(PLGA/PCL)blending on the morphology,shrinkage and degradation behaviors of the electrospun fibers. With the increase of PLGA content in the composite fibers,the average diameter of the electrospun fibers increased from 1.35μm to 1.95μm.The serious shrinking of the electrospun PLGA meshes could be circumvented by adding 20% PCL in the fibers,resulting from the semi-crystalline nature ...     

SYNTHESIS AND CHARACTERIZATION OF COMPLEXES OF LANTHANIDE NITRATES WITH 2,2''''-BIPYRIDYL

The interactions of 2,2'-bipyridyl with the lanthanide nitrates werestudied and complexes of the formula Ln(NO_8)_8(bipy)_8 were isolated from water-ethanol mixed solvent.The complexes were characterized by elemental analysis,conductivity measurments,IR spectra and DAT-TG analysis.     

PREPARATION AND CHARACTERIZATION OF POLY[STYRENE-co-4-(2-PHENYLTHIOETHYLTHIOMETHYL)STYRENE]

Sulfur-containing monomers have received special interest from researchers because of their outstanding opticalperformance. Using the reaction between 2-phenylthioethyl-1-mercaptan and p-chloromethylstyrene, a new vinyl monomer4-(2-phenylthioethylthiomethyl)styrene (PTETMSt) was synthesized. Its structure was characterized by FT-IR and NMR.Copolymerization of styrene and PTETMSt was investigated. The data show that poly(styrene-co-PTETMSt) has higher refractive index, lower density and percentage of water absorption. The copolymer can be used on optical materials.     

INCLUSION COMPLEX FORMATION BETWEEN α-CYCLODEXTRIN AND BIODEGRADABLE COMBLIKE COPOLYMERS WITH POLY(α,β-MALIC ACID) BACKBONES AND mPEG SIDE CHAINS

Inclusion complexes(ICs) composed ofα-cyclodextrins(α-CD) and biodegradable comblike copolymers with poly(α,β-malic acid)(PMA) backbones and methylated poly(ethylene glycol)(mPEG) side chains were prepared by the host-guest reaction.Two series of ICs with mPEG750 and mPEG2000 were prepared.The stoichiometry(EG/CD) of all the ICs in mPEG2000 series was 3.1,no matter what the graft degree was.While in mPEG750 series,the stoichiometry(EG/CD) was very different:it increased with the amount of mPEG decreasing...     

PREPARATION AND CHARACTERIZATION OF SHISH-KEBAB TYPE LIQUID CRYSTALLINE POLY（p-PHENYLENEVINYLENE）

Novel shish-kebab type liquid crystalline poly（p-phenylenevinylene） derivatives were synthesized by Stille coupling reaction from 2,5-bis[（4-n-alkoxyl）benzoyloxy]1,4-dibromobenzene （monomer l） and 1,2-bis（tributylstannyl） ethylene （monomer 2）. The polymers with alkoxy groups are soluble in common organic solvents and exhibit blue fluorescence. Both the cast film and the annealed film have large red-shifts in fluorescence spectra and show yellow fluorescence. The polymers with CN and NO2 groups show poor solubility and green fluorescence. All the polymers possess liquid crystalline smectic phases. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The polymers are easily aligned under a magnetic field of 10 Tesla. It is found that the conjugated backbone and LC side chain are aligned perpendicular and parallel to the magnetic field, respectively. The polymers show optical dichroism in fluorescence spectra, suggesting that they are available for advance materials with linear optical polarization.     

IN SITU OBSERVATION OF MELTING AND CRYSTALLIZATION BEHAVIORS OF POLY(ε-CAPROLACTONE) ULTRA-THIN FILMS BY AFM TECHNIQUE

The melting and crystallization behaviors of poly(ε-caprolactone) (PCL) ultra-thin films with thickness from 15 nm to 8 nm were studied by AFM technique equipped with a hot-stage in real-time. It was found that melting can erase the spherulitic structure for polymer film with high thickness. However, annealing above the melting point can not completely erase the tree-like structure for the thinner polymer film. Generally, the structure formation of thin polymer films of PCL is controlled not only by melting and crystallization but also by dewetting during thermal annealing procedures, and dewetting predominates in the structure formation of ultra-thin films. However, the presence of tree-like morphology at 75 °C may be due to the strong interaction between PCL and mica surface, which may stick the PCL chains onto the mica surface during thermal annealing process. Moreover, the growth of the dendrites was investigated and it was found that crystallization is followed from a dewetted sample, and the branches did not grow with the stems. The crystallization of polymer in the ultra-thin films is a diffusion-controlled process. Both melting and crystallization behaviors of PCL in thin films are influenced by film thickness.     

SYNTHESIS AND CHARACTERIZATION OF RARE EARTH METAL COMPLEXES WITH PIPERONAL ISONICOTINOYL HYDRAZONE

Complexes of La(Ⅲ),Nd(Ⅲ),Sm(Ⅲ),Eu(Ⅲ),Gd(Ⅲ),Dy(Ⅲ),Er(Ⅲ),Yb(Ⅲ)and Y(Ⅲ)with piperonal isonicotinoyl hydrazone(HPIN)have been synthesized in DMF and EtOH.The complexes have been characte-rized by elemental analysis,molar conductance,i.r.,UV and~1H n.m.r.spectra,magnetic measurements,X-ray powder diffraction and DTA.     

SYNTHESES OF CYANOMETAL INCLUSION COMPOUNDS (PART I): PREPARATION AND CHARACTERIZATION OF catena-[catena-(α,ω‐DIAMINOHEXANE)CADMIUM-μ‐TETRACYANONICKELATE]‐χGEST COMPLEXES

Abstract

Synthetic details of a series of clathrate compounds of general formula, catena-[catena-(α,ω‐diaminohexane)cadmium-μ-tetracyanonickelate]‐χGuest, are described. The coefficient χ, i.e. the number of guest molecules per unit of the host metal complex, is estimated for each complex. The features of this type clathrate are discussed.     

PREPARATION OF PERFLUOROOCTANOYL-MODIFIED POLY(VINYL-ALCOHOL)S AND THEIR ADSORPTION AT AN AIR-WATER INTERFACE

Perfluorooctanoyl modified poly(vinyl alcohol)s (FPVA) were prepared by means of substituting a small amountof hydroxyl groups on the backbone of poly(vinyl alcohol), for which the initial degree of polymerization is equal to 1750.The substitution extent, defined by the number of substituting units in a chain, for the four FPVA samples was in the range of0.5-5 perfluorooctanoyl groups per chain. The FPVA samples with the highest substitution extent still had good solubility inwater. It was shown by experimental measurement at 30.0±0.1℃ that the surface tension of the aqueous solution of thehighest substituted FPVA decreased to 16.6 mN/In at a higher concentration, e.g about 0.1 g/mL. Obviously,macromolecules of FPVA exhibit a very strong tendency to adsorb at the air-water interface, because the hydrophobicperfluorooctanoyl groups in FPVA have a very high surface activity as they are in small molecular fluorinated surfactants.The chain conformation of such a model polymer adsorbed on the air-water interface was also discussed.     

SYNTHESIS AND CHARACTERIZATION OF NEWLY DESIGNED POLY[DI(ALKYL) VINYLTEREPHTHALATE]S

A series of newly designed monomers of 2-vinylterephthalates (VT) were synthesized. The monomers contain onephenylene group connected with two alkyl groups (carbon number varying from 1 to 6) via ester linkage. Their chemicalstructures were confirmed by mass spectroscopy (MS), ~1-H-NMR, and elemental analysis (EA). The corresponding polymers,poly[di(alkyl) vinylterephthalate]s (PDAVTs), were obtained using convenional free redical polymerization. The polymerswere found to be able to develop inio liquid crystalline phase when the size of the alkyl group in the side-chain increases tobe larger than the ethyl group.     

PREPARATION AND PROPERTIES OF POLY(LACTIC ACID-CO-GLYCOL TEREPHTHALIC ACID)COPOLYESTER

1. INTRODUCTIONThe amount of industrial and municipal waste has been increasing all over the world. Therefore, the design and development of materials capable of being degraded into safe components under specific environmental conditions have become incre…     

A NEW METHOD OF PREPARATION OF IRON(II) PORPHYRIN COMPLEXES — ISOLATION AND CHARACTERIZATION OF BIS(N-BUTYLAMINE) IRON(II) PORPHYRIN

Abstract

Fe(II)T(p-X)PP(NH₂Bu ⁿ )₂ (X = H, Cl, CH₃, OCH₃, TPP = dianion of meso-tetraphenylporphyrin) complexes have been prepared by the reduction of Fe(III) porphrins with n-butylamine in antiformin/dichloromethane in air, and by sodium borohydride reduction. The complexes were characterized by electronic and IR spectra and elemental analysis.     

PREPARATION AND CHARACTERIZATION OF BINUCLEAR μ-PHENOLATOCOPPER(II)CHELATES.

Two new water-soluble binuclear copper(II)chelates derived from the condensationof 2,6-diformyl-4-methylphenol with glycylglycine were characterized with spectral.magnetic and electrochemical techniques.     

CONTROL OF DIMENSIONAL STABILITY AND DEGRADATION RATE IN ELECTROSPUN COMPOSITE SCAFFOLDS COMPOSED OF POLY(D,L-LACTIDE-CO-GLYCOLIDE)AND POLY(Ε-CAPROLACTONE)

The purpose of this study is to investigate the effect of composition poly(D,L-lactide-co-glycolide)/poly(ε-caprolactone)(PLGA/PCL)blending on the morphology,shrinkage and degradation behaviors of the electrospun fibers.With the increase of PLGA content in the composite fibers,the average diameter of the electrospun fibers increased from 1.35 μm to 1.95μm.The serious shrinking of the electrospun PLGA meshes could be circumvented by adding 20% PCL in the fibers,resulting from the semi-crystalline nature of PCL.The degradation rate of the electrospun meshes could be modulated by PLGA/PCL composition.In addition,the electrospun meshes containing 20% PCL displayed stable dimensional morphology with degradation.     

SYNTHESIS AND CHARACTERIZATION OF POLY(STYRENE-co-4-VINYLPYRIDINE) NEODYMIUM COMPLEX

Poly(styrene-co-4-vinylpyridine)-neodymium complexes(NdCl_3·PS4VPY)with variouscontents of the functional group and neodymium have been prepared and characterized.Theinfrared and X-ray photoelectron spectra indicate that uncoordinated 4-vinylpyridine(4VPY)unitsremain in the NdCl_3·PS4VPY complexes.The catalytic behaviour of NdCl_3·PS4VPY was described briefly.     

SYNTHESIS AND CHARACTERIZATION OF COMPLEXES OF TRANSITION METAL WITH PBDETA, A NEW POLYDENTATE LIGAND

The synthesis and characterization are reported for a series of bi- and trinuclear complexes of the first transition metal ions with PBDETA, the newly syn thesized polydentate ligand. The electron transition energy in binuclear compound is stronger than that in trinuclear. There is a weak antiferromagnetic exchange interaction in tricopper and trimanganese.